DID DI NDTI 81307A FA Qual Test Plan Procedures.pdf
Data Item Description Rev. A PDF 59 KB Posted
- Attached to
- Lock Ring, Turbine N 2840016195780NZ
- Solicitation number
- FA8121-24-R-0016
About this file
This document is a Data Item Description (DID) that establishes the requirements for a First Article Qualification Test Plan and Procedures. The DID specifies the format and content that must be included in the test plan, such as the purpose of the test, applicable documents, description of units to be tested, detailed test procedures, and inspection criteria to evaluate the test results. The test plan must define the test equipment, readings, and minimum performance requirements the unit under test must meet to be considered acceptable to the Government.
The related federal contract opportunity is a solicitation for a one-time spares buy of Lock Ring, Turbine N with NSN 2840016195780NZ. The solicitation is subject to qualification requirements - sources must be approved prior to award in accordance with FAR 52.209-1. The Government will not delay award to review pending Source Approval Requests, so offerors are encouraged to submit approvals as soon as possible. The solicitation is also subject to the availability of funds, and no award will be made until funds are available.
View the file
Other versions and copies of DI-NDTI-81307A
Show all 20
Who attaches DI-NDTI-81307A
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
File details come from the government source that posted it. Updated .