DI-NDTI-81307A First Article Qualification Test Plan and Procedures.pdf

Data Item Description Rev. A PDF 30 KB Posted

Attached to
RATO (Rocket Assisted Take Off) Motor and Initiator
Solicitation number
FA8213-RATO
Issued by

About this file

This is a Data Item Description (DID) document that establishes requirements for First Article Qualification Test Plans and Procedures (DI-NDTI-81307A). The document provides format and content preparation instructions for contractors to develop test procedures, test equipment specifications, and inspection criteria for first article qualification testing.

The DID requires test plans to include: purpose of test, applicable documents, description of units to be tested, and detailed test descriptions with step-by-step procedures for operators. Plans must define required readings, equipment settings, and descriptions of test equipment including commercial identification. Additionally, contractors must provide drawings/schematics of noncommercial test fixtures and establish inspection criteria defining minimum performance requirements, including worst-case power inputs, signal levels, and timing parameters that units must meet for government acceptance. The document specifies that while the overall format is at the contractor's discretion, these content elements are mandatory for compliance.

View the file

Other versions and copies of DI-NDTI-81307A

File Revision Posted Attached to
DI-NDTI-81307A.pdf Rev. A F100CoreModuleContainer_End_Item_F100_NSN_8145014524579NZ_PN_P4078843
DID_DI_NDTI_81307A_Test Plan.pdf Rev. A CLOCK PANEL, NSN: 6645-01-520-3319RK, ALT NSN: 6645-01-398-9100RK, PN: DNM-100-150, ALT PN: DNM-100-150-06
DID_DI_NDTI_81307A_Test Plan.pdf Rev. A CLOCK PANEL, NSN: 6645-01-520-3319RK, ALT NSN: 6645-01-398-9100RK, PN: DNM-100-150, ALT PN: DNM-100-150-06
DI-NDTI-81307A.pdf Rev. A NSN: 2840-01-308-4467NZ P/N: 4070107 Noun: Liner, Augmentor
DI-NDTI-81307A.pdf Rev. A SPRTA1-26-R-0139 NSN: 2840-01-308-4467NZ Liner, Augmentor COM
DID_DI-NDTI-81307A.pdf Rev. A NEW MANUFACTURE DUCT, TURBINE, AIRCRAFT
DID_DI_NDTI_81307A_Test Plan.pdf Rev. A CLOCK PANEL, NSN: 6645-01-520-3119RK, PN: MIL-PRF-32144, ALT PN: DNM-100-150-06
DID_DI_NDTI_81307A_Test Plan.pdf Rev. A CLOCK PANEL NSN: 6645-01-520-3119RK, PN: MIL-PRF-32144, ALT PN: DNM-100-150-06
DI-NDTI-81307A.pdf Rev. A NSN: 3110-00-416-9422 NZ NOUN: BEARING, ROLLER, CYLI ENGINE: F100 PR: FD20302402022
DI-NDTI-81307A.pdf Rev. A Spares Buy Seat Bearing for the F100 Aircraft, NSN: 3110-01-454-4610NZ
DI-NDTI-81307A.pdf Rev. A Seal, Air, Aircraft G, NSN 2840016338198NZ - New manufacture
DI-NDTI-81307A FA Qual Test Plan Procedure.pdf Rev. A CANCELLED Duct, Turbine NSN 2840015042791NZ
DID DI NDTI 81307A FA Qual Test Plan Procedures.pdf Rev. A Lock Ring, Turbine N 2840016195780NZ
DID DI NDTI 81307A FA Qual Test Plan Procedures.pdf Rev. A Tube Assembly, Metal NSN 4710005150330NZ
ATTACHMENT_1_DI-NDTI-81307A.pdf Rev. A Lever, Remote Control
DID_DI_NDTI_81307A.pdf Rev. A F100 Spares Seal, Air, Aircraft G NSN 2840016028421NZ
DI-NDTI-81307A.pdf Rev. A Turbine Ducts - NSN 2840-01-504-2791NZ
DID DI NDTI 81307A FA Qual Test Plan.pdf Rev. A F100 Containment Hardware 4th BOAS Spares Buy NSN 2840016028421NZ
Data Item Description_DI-NDTI-81307A.pdf Rev. A Metallic Seals - NSN 2840003438336
3238369_ATTACH_DI-NDTI-81307A.pdf Rev. A Spares of Remote Control Lever
Show all 20

Who attaches DI-NDTI-81307A

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DATA ITEM DESCRIPTION

Title: First Article Qualification Test Plan and Procedures

Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A

Use/relationship:

To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.

This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID supercedes DI-NDTI-81307.

Requirements:

1. Reference documents. None.

2. Format:

The plan shall be in the contractor’s format.

3. Content:

This test plan shall include the following:

a. Purpose of test.

b. Applicable documents.

c. Description of units to be tested.

d. Test description to include the following:

(1) Step-by-step procedures which are to be followed by the operator when performing each test.

(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.

Source: https://assist.dla.mil -- Downloaded: 2024-07-18T14:43Z

Check the source to verify that this is the current version before use.

DI-NDTI-81307A

(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.

e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.

4. END OF DI-NDTI-81307A

Source: https://assist.dla.mil -- Downloaded: 2024-07-18T14:43Z

Check the source to verify that this is the current version before use.

DATA ITEM DESCRIPTION
Requirements:

File details come from the government source that posted it. Updated .