DI-NDTI-81307A.pdf
Data Item Description Rev. A PDF 20 KB Posted
- Solicitation number
- SPRTA127R0023
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is a Data Item Description (DID) that establishes the format and content requirements for a First Article Qualification Test Plan and Procedures.
The DID, numbered DI-NDTI-81307A and approved November 21, 2006, applies to the Naval Sea Systems Command (NS/I522) and supersedes the previous DI-NDTI-81307 version. The test plan shall be submitted in the contractor's format and must include: the purpose of the test; applicable documents; description of units to be tested; and comprehensive test descriptions containing step-by-step operator procedures, specific readings and settings to be taken, and descriptions of all test equipment with commercial identification. The plan must also include drawings, schematics, photographs, and other documentation of any noncommercial fixtures and testers necessary for test evaluation. Additionally, the contractor must define inspection criteria that establish the minimum performance requirements the unit under test must meet for Government acceptance, including worst case analysis of prime power input, signal level and timing inputs, and signal level and timing outputs.
View the file
Other versions and copies of DI-NDTI-81307A
Show all 20
Who attaches DI-NDTI-81307A
Other files
| File | Type | Posted |
|---|---|---|
| RFP SPRTA127R0023.pdf | ||
| 853363_QUALASSURANCE.pdf | ||
| 4328808_EDL_REPORT.pdf | ||
| 853594_ CDRL.pdf | ||
| TEST INSPECTION REPORT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .