DI-NDTI-81307A.pdf
Data Item Description Rev. A PDF 193 KB Posted
- Attached to
- Turbine Ducts - NSN 2840-01-504-2791NZ
- Solicitation number
- FA8121-24-R-0015
About this file
This document is a Data Item Description (DID) that establishes the format and content requirements for a First Article Qualification Test Plan and Procedures. The plan must include the purpose of the test, applicable documents, a description of the units to be tested, detailed test procedures and equipment, and inspection criteria to define the minimum performance requirements the unit under test must meet to be considered acceptable to the Government.
The related federal contract opportunity is a solicitation for a one-time spares buy of Turbine Ducts with NSN 2840-01-504-2791NZ. The solicitation requires offerors to submit proposals by April 19, 2024. Qualification requirements state that offerors must be an approved source prior to contract award, and the Government is not required to delay award to review pending Source Approval Requests. First article requirements include production facilities, test/inspection, a test plan, and a test report.
View the file
Other versions and copies of DI-NDTI-81307A
Show all 20
Who attaches DI-NDTI-81307A
Other files
| File | Type | Posted |
|---|---|---|
| EDL.pdf | ||
| QAI_RQMT.pdf | ||
| MQR_PSD1R1.pdf | ||
| TRNSPDATA.pdf | ||
| IUID_Checklist.pdf | ||
| FA812124R0015.pdf | ||
| LPF_QAR_003_Rev_E.pdf | ||
| SMW.pdf | ||
| Item_Description.pdf | ||
| EI_Rev_E.pdf | ||
| Surplus Material.pdf | ||
| PKGRQMT.pdf | ||
| FA_RQMT.pdf | ||
| CDRL.pdf | ||
| DI-NDTI-80809B.pdf |
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
File details come from the government source that posted it. Updated .