Attachment 15 - 9000-P040 REV 3.pdf
PDF 176 KB Posted
- Attached to
- South Florida Ocean Measurement Facility (SFOMF) Logistics And Maritime Operation Services RFP
- Solicitation number
- N00167-22-R-0008
About this file
This document contains technical drawings and specifications for a reinforcing mounting ring component. The drawings provide details for the ring, including eight threaded mounting holes, dimensional tolerances, notes specifying material and certification requirements, and a revision history. The related federal contract opportunity is a request for proposal for logistics and maritime operation services at the South Florida Ocean Measurement Facility. Offerors are sought to provide services such as transportation, port operations, small boat operations, and equipment maintenance. The solicitation number is N00167-22-R-0008 and proposals are due by the date specified in the RFP. The requirement is with the Department of the Navy Naval Sea Systems Command to support their South Florida Ocean Measurement Facility.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SUGGESTED SOURCE(S) OF SUPPLY
DASH
NO.
DAI COMPANY SUPPLIER PART NO.
-TOOLCO-
- 3JMG1 TITANIUM
INDUSTRIES -
- MFG
DES. ENG.
CHECKED
DRAWN
DATEINITIALNAME (PRINTED)TITLE
NAVAL SURFACE WARFARE CENTER
CARDEROCK DIV. - FT. LAUDERDALE DETACHMENT
91 N. BEACH ROAD, DANIA BEACH, FL 33004-3035
2/24/2020
2/24/2020
E.R. TALAMO
E.R. TALAMO
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
WEIGHT SHEET
REVSFOMF DRAWINGCAGE CODESIZE
TITLE
DEPARTMENT OF THE NAVY
NAVAL SEA SYSTEMS COMMAND
WASHINGTON, DC 20376-0001
16623
POUNDSSCALE 1:2
D 3
9000-P040
REINFORCING MOUNTING RING,
MIDDLE , WILMA CABLE HANG-OFF
DIMENSIONAL TOLERANCES -
UNLESS OTHERWISE SPECIFIED
MACHINED
DIMENSION DECIMALS FRACTIONS
2 PL 3 PL
UNDER 6
6 TO 24
24 & OVER
±.010 ±.005
±.020 ±.010
±.030 ±.015
± 1/64
± 1/32
± 1/16
ANGULAR TOLERANCE 0 30' S/N EFFECTIVITY
FROM THRUUSED ONNEXT ASSY
APPLICATION
FINALNEXT
QTY REQD
PER ASSY
PART
DASH
NO.
--- 2 9000-A009 WILMA II1
UNLESS OTHERWISE SPECIFIED
MATERIAL PROPERTIES
MATERIAL
TITANIUM, GRADE 2 -UNALLOYED
MATERIAL SPECIFICATION
ASTM B265 GRADE 2
RAW STOCK SHAPE
PLATE
NOMINAL DIMENSIONS
1.00 THK X 13.00 DIA X X
FINISH
NC FILE: -
DISTRIBUTION STATEMENT “D”
Distribution authorized to DoD and DoD contractors only; CRITICAL TECHNOLOGY, (Date 10/03/2017). Other requests shall be referred to NSWC Carderock Division, Fort
Lauderdale Detachment, Code 754.
8X .500-13 UNC-2B, FAR SIDE
1.125 .364
1.175 X 90°, NEAR SIDE
10.750
45.0° 7X
A
A
0.015 M A B
12.13
1.00
A
8.000
SECTION A-A
B
.58 90°
45 x .06 45 x .06
45 x .25
45 x .06
DETAIL 1
SCALE 1 : 1
NOTES:
DIMENSIONS AND TOLERANCES ARE IN ACCORDANCE WITH ASME Y14.5-2018.1.
INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.100-2017.2.
DIMENSIONS ARE IN INCHES UNLESS NOTED OTHERWISE.3.
REMOVE ALL BURRS AND SHARP EDGES 0.05 MAX RADIUS OR CHAMFER.4.
CERTIFICATION - THE MANUFACTURER SHALL SUPPLY AT LEAST ONE COPY OF 5.
THE REPORT CERTIFYING THAT THE MATERIAL SUPPLIED HAS BEEN
MANUFACTURED, INSPECTED, SAMPLED, AND TESTED IN ACCORDANCE WITH
THE REQUIREMENTS OF THIS ASTM B265 AND THAT THE RESULTS OF CHEMICAL
ANALYSIS, TENSILE, AND OTHER TESTS MEET THE REQUIREMENTS OF ASTM
B265 FOR THE GRADE 2. THE REPORT SHALL INCLUDE RESULTS OF ALL
CHEMICAL ANALYSIS, TENSILE TESTS, AND ALL OTHER TESTS REQUIRED BY
ASTM B265.
3 3
REVISION HISTORY
ZONE REV DESCRIPTION DATE APPROVED
1 ISSUED FOR FABRICATION 12/3/2020
C5 2 ADDED THREAD DIMENSION, DELETED THREAD DRILL DIAMETER 1/20/2021
B7, C7, C8 3 ADDED MISSING CHAMFER DIMENSIONS, CHANGED .06 FILLET
TO 45 X .06 CHAMFER 2/9/2021
A A
B B
C C
D D
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Section View A-A |
| Detail View 1 (1 : 1) |
File details come from the government source that posted it. Updated .