Attachment 14 - 9000-P022 REV 3.pdf
PDF 167 KB Posted
- Attached to
- South Florida Ocean Measurement Facility (SFOMF) Logistics And Maritime Operation Services RFP
- Solicitation number
- N00167-22-R-0008
About this file
This document contains a technical drawing for a titanium tube body component and related federal contract solicitation. The technical drawing provides specifications for a titanium tube body to be used in a buoy pressure vessel, including material composition, dimensions, tolerances, notes on finishing and certification requirements. The related federal contract solicitation is for logistics and maritime operations services in support of the South Florida Ocean Measurement Facility. Interested offerors are sought to provide services such as facility operations, marine vessel operations, and equipment maintenance with proposals due by January 2022 and contract award anticipated in April 2022. The soliciting agency is the Naval Sea Systems Command within the Department of the Navy.
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SUGGESTED SOURCE(S) OF SUPPLY
DASH
NO.
DAI COMPANY SUPPLIER PART NO.
- 3JMG1 TITANIUM
INDUSTRIES
- MFG
DES. ENG.
CHECKED
DRAWN
DATEINITIALNAME (PRINTED)TITLE
NAVAL SURFACE WARFARE CENTER
CARDEROCK DIV. - FT. LAUDERDALE DETACHMENT
91 N. BEACH ROAD, DANIA BEACH, FL 33004-3035
1/15/2020
12/17/2020
4/2/2020
E.R. TALAMO
M. YOUNG
E.R. TALAMO
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
WEIGHT SHEET
REVSFOMF DRAWINGCAGE CODESIZE
TITLE
DEPARTMENT OF THE NAVY
NAVAL SEA SYSTEMS COMMAND
WASHINGTON, DC 20376-0001
16623
POUNDSSCALE 1:2
D 3
75.27 1 OF 1
9000-P022
TUBE BODY, BUOY PRESSURE
VESSEL
DIMENSIONAL TOLERANCES -
UNLESS OTHERWISE SPECIFIED
MACHINED
DIMENSION DECIMALS FRACTIONS
2 PL 3 PL
UNDER 6
6 TO 24
24 & OVER
±.010 ±.005
±.020 ±.010
±.030 ±.015
± 1/64
± 1/32
± 1/16
ANGULAR TOLERANCE 0 30' S/N EFFECTIVITY
FROM THRUUSED ONNEXT ASSY
APPLICATION
FINALNEXT
QTY REQD
PER ASSY
PART
DASH
NO.
--- 2 9000-A006 WILMA II1
UNLESS OTHERWISE SPECIFIED
MATERIAL PROPERTIES
MATERIAL
TITANIUM UNALLOYED
MATERIAL SPECIFICATION
ASTM B862 GRADE 2
RAW STOCK SHAPE
TUBE
NOMINAL DIMENSIONS
Ø10.50 OD X 0.50 WALL X 30.00 LENGTH X
FINISH
NC FILE: -
DISTRIBUTION STATEMENT “D”
Distribution authorized to DoD and DoD contractors only; CRITICAL TECHNOLOGY, (Date 10/03/2017). Other requests shall be referred to NSWC Carderock Division, Fort
Lauderdale Detachment, Code 754.
10.50 AWAY FROM WELD BEAD
WELD BEAD .06 - .13
.500+ .055 .010
AWAY FROM WELD BEAD
A
A
30.00
9.750+ .002 .000 9.500±.125
AWAY FROM
WELD BEAD
WELD BEAD .06 - .13
9.750+ .002 .000
SECTION A-A
SCALE 1 : 2
15°
.13
45°
.13 1.137
.050 .050
DETAIL 1
2 X (BOTH ENDS)
SCALE 1 : 1
C
TURNED32
NOTES:
DIMENSIONS AND TOLERANCES ARE IN ACCORDANCE WITH ASME Y14.5-2018.1.
INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.100-2017.2.
DIMENSIONS ARE IN INCHES UNLESS NOTED OTHERWISE.3.
REMOVE ALL BURRS AND SHARP EDGES 0.05 MAX RADIUS OR CHAMFER.4.
CERTIFICATION - THE MANUFACTURER SHALL SUPPLY AT LEAST ONE COPY OF THE 5.
REPORT CERTIFYING THAT THE MATERIAL SUPPLIED HAS BEEN MANUFACTURED,
INSPECTED, SAMPLED, AND TESTED IN ACCORDANCE WITH THE REQUIREMENTS OF ASTM
B862 AND THAT THE RESULTS OF CHEMICAL ANALYSIS, TENSILE, AND OTHER TESTS MEET
THE REQUIREMENTS OF ASTM B862 FOR GRADE 2. REPORT SHALL INCLUDE RESULTS OF
CHEMICAL ANALYSIS, TENSILE TESTS, AND ALL OTHER TESTS REQUIRED BY ASTM B862.
TITANIUM INGOT MUST BE FROM US ONLY SOURCE BY ELECTRON BEAM REMELT PROCESS.6.
TUBE TO BE AS-WELDED.7.
ENTIRE SEAM WELD RADIOGRAPH INSPECTED (RT) PER ASTM B862 S1.2.18.
REVISION HISTORY
ZONE REV DESCRIPTION DATE APPROVED
1 ISSUED FOR FABRICATION 12/17/2020
C1, C8 2 CHANGED 9.625 TO REFERENCE DIMENSION, CORRECTION TO
WALL THICKNESS TOLERANCE 1/6/2021
C1, C8 3
WALL THICKNESS CHANGE FROM .375 TO .500, INNER
DIAMETER CHANGED TO CONTROLLED SURFACE, OD CHANGED
TO REFERENCE DIM., INCLUDED WELD BEAD NOTE
1/6/2021
A A
B B
C C
D D
| Sheet1 |
| Drawing View1 |
| Section View A-A |
| Detail View 1 (1 : 1) |
File details come from the government source that posted it. Updated .