Attachment_12_A00B_DI-NDTI-80809B.pdf

This is a Data Item Description (DID) form that establishes the format and content requirements for Test/Inspection Reports (DI-NDTI-80809B). The DID applies to engineering developmental testing, preliminary qualification testing, qualification testing, and acceptance testing activities and supersedes prior versions DI-NDTI-80809A and DI-MISC-80653. The Office of Primary Responsibility is F/AFMC-DCP, with approval date of January 24, 1997.

The Test/Inspection Report must contain specific standardized sections including: cover and title page information (report date, number, contractor identification, contract details, test type, item identification, test period, requiring government activity, and security classification); table of contents identifying all major sections and illustrations; introduction with test objectives, complete item identification, and correlation of test parameters to contractual requirements; summary of significant results and proposed corrective actions; reference documents; body of report containing test equipment identification, facility installation and setup, procedures, recorded data, test results with matrices and analysis, conclusions, and recommendations regarding item acceptability, additional testing needs, redesign requirements, and procedure improvements; authentication certifications signed by contractor personnel and government witnesses confirming test performance accuracy and item acceptance status; and appendices containing voluminous data and referenced documentation. Contractor format is acceptable provided all required information is organized to facilitate presentation and understanding. The public reporting burden is estimated at 110 hours per response.