08/11/2021

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

4940-01-680-2383 ARMAMENT REPAIR SHOP ARMAMENT REPAIR SHOP

Enlarge

6850-01-133-0373 INHIBITOR,CORROSION,VAPOR BARRIER : RUST AND CORROSION

PROTECTION FOR: STEEL, IRON, BRASS, COPPER, ALUMINUM, SILVER

AND NICKEL. ZERUST VC2-2 NORUST VAPOR CAPSULE CREATES AN

INVISIBLE VAPOR SHIELD AROUND ALUMINUM, BRASS, COPPER, IRON,

STEEL, AND SILVER TO PROTECT FROM RUST. PLACE ZERUST NORUST

VAPOR CAPSULE INSIDE A STORAGE CONTAINER OR ANY ENCLOSURE

TO PREVENT RUST AND CORROSION. ZERUST NORUST VAPOR CAPSULE

IS AN INVISIBLE VAPOR THAT FORMS A CORROSION AND RUST

RESISTANT BARRIER ON METAL SURFACES. ONE SMALL CAPSULE

PROTECTS A RADIUS OF 2 FEET FOR TWO YEARS. CAPSULE SIZE: 3" X 1-

1/4" X 7/8" NONTOXIC / ODORLESS ENVIRONMENTALLY SAFE. CAPSULE

HAS ADHESIVE BACK.

Enlarge

7195-01-661-7175 CHAIR,ROTARY CHAIR,ROTARY STOOL, WORK: SWIVEL SEAT WITH

FOOTREST ANDBACKREST, 18-1/2 INCH WIDE X 17 INCH DEEP X 1-1/2"

THICK SEAT, 16-1/2" WIDE X 12-1/2" TALL X 1" THICK BACKREST; BACK

VERTICALADJUSTMENT RANGE 2-1/4 INCHES; BACK HORIZONTAL

ADJUSTMENTRANGE 2 INCHES; 18 INCHDIAMETER CIRCULAR FOOTREST;

ADJUSTSFROM 3 INCHES TO 12 INCHES ABOVE THE BASE; SEAT HEIGHT

WITHCASTERS RANGES FROM 23 TO 33 INCHES; SEAT AND BACK

MADEFROM POLYURETHANE; METAL PIECES ARE CHROME PLATED.

Enlarge

4933-00-699-9304 SLING,GUN TUBE SLING,GUN TUBE SLING, GUN TUBE: MATERIAL:(A)

NYLON 6,6 WITHSTUFFER YARN WARNING. 3 IN. W. MIN THES 0.75, 1,

1.25, 1.50, 1.75, 2AND 3 MILLIMETER SLING, GUN TUBE: MATERIAL:(A)

NYLON 6,6 WITHSTUFFER YARN WARNING. 3 IN. W. MIN TENSILE

STRENGTH 20,400 LB.PER PLY;(B)NYLON THREAD 6 CORD 70 LB

TENSILE STRENGTH; (C)CORDURA LINER 3 IN. WIDTH TENSILE

STRENGTH 6900 LB;(D)NYLON ISTO BE LATEX IMPREGNATED RUBBER

OR ACYLICBASE (ULTRAVIOLET +MOISTURE RESISTANT); SLING:(A)

LENGTH 60 IN. BEARING TO BEARING(INSIDE EYETO INSIDE EYE);(B)END

CONFIGURATION FLAT EYE BOTHENDS OF SLING. LENGTH OF EYE 12 IN.

TAPERED TO 2IN. AT BEARINGSURFACE;(C)CORDURA LINER: FROM BASE

OF EYE TOBASE OF EYE,ONESIDE ONLY;(D) SEWING PATTERN FOR EYE:

MINIMUM OF 10 IN.SPLICE 3-1/2-5 STICHESPER IN. USING "W" CROSS

STICH PATTERN;(E)BODY OF SLING 2 PLY OF NYLON TO BE SEWN

TOGETHER FULL LENGTHOF SLING;(F) LEATHER I.D. TAG:(SEWN ON

SLING) MAX LOAD:CHOKEHITCH 6000 LB,BASKET HITCH 12,000 LB;PIN

8735439; WARNINGRE

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UA

UB

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN

EAN X

EAN N

EAN X

EI Desc:

A

C I I C

ARMAMENT REPAIR SHOP SET VERSION II

D

ATTACHMENT 10 - AVAILABLE MAINTENANCE TOOLS

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5140-01-627-5342 PANEL,INSERT,TOOL BOX : SEE DRAWING 11A7000406; CONSISTS OF 1

EACH 1/8 POLYETHYLENE HARD BACKER DWG. 11A7000213, 2 EACH 2"

THICK FOAM DWG. 11A7000306 AND FOAM ADHESIVE DWG.

11A7000568.

Enlarge

8120-01-315-8703 CYLINDER,COMPRESSEDGAS,NATURAL,DRY : 2-3/4 INCH DIAMETER, 10

INCH LENGTH, 14.1 OUNCES, FULLY CHARGED; COMPATIBLE WITH

BERNZOMATIC UL125 TORCH KIT. THE INITIAL ISSUE OF THIS SKO WILL

CONTAIN UNFILLED CYLINDERS. CYLINDERS WILL BE FILLED ATLOCAL

LEVELS USING THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON

HAND RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

Enlarge

6830-01-494-3123 BUTANE : TRIPLE-REFINED FORMULA REDUCES CLOGGING OF FILTERS.

CONTAINS NO CFC'S, CANISTER WITH SINGLE-PIECE UNIVERSAL FILLING

TIP. CANISTER IS 5 1/8 OZ. (145 GRAM) THIS IS A CONSUMABLE ITEM,

NONACCOUNTABLE ON HAND RECEIPT, ISSUED WITH THE TOOL SET,

QUANTITIES ON HAND ESTABLISHED BY OWNING UNIT.

Enlarge

7240-00-527-9868 FUNNEL : GALVANIZED STEEL, RIGID SPOUT, 1 QUART CAPACITY.

STURDY GENERAL PURPOSE FUNNEL, WITH REMOVABLE 70 MESH

BRASS STRAINER.

Enlarge

8115-01-661-6277 BOX,SMALL PARTS : PLASTIC MATERIAL; NOMINAL INSIDE DIMENSIONS

OF THE BOX SHALL BE 3-15/16 INCHES WIDE BY 6-7/8 INCHES LONG BY

1-1/16 INCHES DEEP WITH A HINGED COVER; INTERIOR SHALL BE

CAPABLE OF BEING DIVIDED INTO 16 COMPARTMENTS INSIDE THE BOX

NOMINALLY DIMENSIONED1-3/8 BY 1-3/16 INCHES AND ONE

COMPARTMENT 4-1/16 BY 1-3/8 INCHES; ANY COLOR IS ACCEPTABLE.

Enlarge

3439-01-244-3421 TORCH KIT,SOLDERING : 7-PC PENCIL FLAME KIT: GAS TYPE: PROPANE.

BODY MATERIAL: BRASS. PROCESS: SOLDERING, HEATING. INCLUDES:

14.1 OZ PROPANE CYLINDER, UL2317 TORCH HEAD, TX405 SPARKER,

810 FLAME SPREADER, REPLACEMENT FLINTS, 650 UTILITY FLAME

HEAD, MOLDED PLASTIC CASE.WT.: 3 1/2 LB

Enlarge

9150-01-450-5693 CUTTING FLUID : PLASTIC BOTTLE, 16 OZ, BIODEGRADABLE ORGANIC,

TAPMATIC. NONTOXIC AND NONHAZARDOUS.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UB

UB

UB

UB

UB

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN D

EAN X

GMN

EAN X

EAN X

EAN

PTN

EI Desc:

A

C I I C

ARMAMENT REPAIR SHOP SET VERSION II

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5140-01-627-5339 PANEL,INSERT,TOOL BOX : SEE DRAWING 11A7000407; CONSISTS OF 1

EACH 1/8" THICK POLYETHYLENE HARD BACKER DWG. 11A7000308, 1

EACH 2" THICK FOAM DWG. 11A7000307 AND FOAM ADHESIVE DWG.

11A7000568.

Enlarge

1025-01-070-3200 KIT,NITROGEN CHARGI : NITROGEN CHARGING KIT (DWG. 8449334).

CONSISTS OF THE FOLLOWING: 1. NITROGEN CHARGING ASSY (DWG.

8449338): WHICH CONSISTS OF A REGULATOR (DWG. 12992234);

VALVE, SHUT OFF (DWG. 8449340); TEE, STREET (DWG. 8449337);

BLEED VALVE ASSY (DWG. 8449339); HOSE ASSEMBLIES (DWG.

12008916-2 & 12008916-3); ADAPTER (DWG. 8449342); AND VALVE

CONNECTION (DWG. 9331962 OR ALTERNATE DWG. 8687044). 2.

ADAPTER-CYLINDER VALVE (DWG. 9331983-1, -2, AND -3). 3. INSERT

(DWG. 8449336). 4. BOX ASSEMBLY (DWG. 12992237) WHICH

CONSISTS OF BOX (DWG. 12992236). 5. GAGE ASSEMBLY, AIR

PRESSURE, 0-3000 PSI INDICATION, CLASS A, SIZE 1, PER SPEC MIL-G-

8348. (SUPERSEDED BY MIL-DTL-8348K W/AMENDMENT 1).

Enlarge

5130-01-661-6698 ROTARY TOOL KIT,ELECTRIC : ROTARY TOOK KIT HAS 115 VOLTS AC OR

DC; NO LOAD SPEED - 25,000 MINIMUM; FULL LOAD SPEED - 14,000

MINIMUM. ADDITIONAL COMPONENTS AND SPARE PARTS SUPPLIED

WITH ELECTRIC ROTARY TOOL: 6 EA ELECTRICAL CONTACT BRUSHES, 1

EA DRESSING STONE, 32 EA ABRASIVEWHEELS, 1 EA HAND FILE, 20 EA

ROTARY FILES, 1 EA FLEXIBLE DRIVE SHAFT, 1 EA PARALLEL GRIP

COLLET, 1 EA COLLET TYPE 1/8" CHUCK, 1 EA COLLET TYPE 1/4" CHUCK,

1 EA 3 CONDUCTOR ELECTRIC CORD, 1 EA MOTOR OVERLOAD FUSE,1

EA QUILL ASSY, 1 EA UNIVERSAL TOOLMOUNT, 1 EA WRENCH SET,

CARRYING CASE, AND INSTRUCTION AND SAFETY MANUAL.

Enlarge

5120-01-661-6285 CLAMP,C : HEAVY DUTY FORGED STEEL CLAMP WITH BLACK-OXIDE

FINISH; SHALL HAVE 3 INCH THROAT DEPTH AND A 8 INCH MINIMUM

JAW OPENING WITH THE SCREW FULLY OPENED AND AN OPENING OF

NOT MORE THAN 4-1/4 INCHES WHEN CLOSED; THE SCREW SHALL BE

AT LEAST 1-1/8 INCH DIAMETER AND SHALL HAVE A SQUARE HEAD

SUITABLE FOR TORQUEING WITH AN OPEN-END WRENCH; 31,250

POUND NOMINAL CLAMPING PRESSURE.

Enlarge

1025-01-668-7587 BRUSH,CLEANING,ARTILLERY : 38 PIECE BORE BRUSH SET CONTAINING

12 STAINLESS STEEL BRUSHES 8 - 19 MILLIMETER DIAMETER, 12 BRASS

BRUSHES 8 - 19 MILLIMETER DIAMETER, 12 NYLON BRUSHES 8 - 19

MILLIMETER DIAMETER, QUICK RELEASE DRIVER, QUICK RELEASE 6 INCH

EXTENSION, AND STORAGE CASE.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UB

UB

UB

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN X

EAN X

EAN D

EAN D

EAN X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5140-01-627-5341 PANEL,INSERT,TOOL BOX :SEE DRAWING 11A7000408; CONSISTS OF 1

EACH 1/8" THICK POLYETHYLENE HARD BACKER DWG. 11A7000313, 2

EACH 2" THICK FOAM DWG. 11A7000311 AND FOAM ADHESIVE DWG.

11A7000568.

Enlarge

5130-01-649-0864 SHARPENER,DRILL BIT,ELECTRIC : SHARPENS 3/32" TO 3/4" BITS. CAST

ALUMINUM POINT ANGLE SHUTTLE, METAL SHARPENING TUBE,

PERMANENT MAGNET MOTOR PRODUCES CONSISTENT POWER. POWER

SUPPLY IS 120 V. DRILL BIT CHUCK; REPLACEABLE DIAMOND GRINDING

WHEEL. SHARPENS HIGH SPEED STEEL, CARBIDE,COBALT, TIN COATED

AND MASONRY BITS. WITH 6 FT CORD. INCLUDES CANVAS

STORAGE/CARRYING BAG.

Enlarge

5120-01-604-4862 JACK,HYDRAULIC,HAND : HYDRAULIC HAND PUMPED JACK, RATED LOAD

CAPACITY OF 20-TONS; SELF CONTAINED UNIT CONSISTING OF A SOLID

PLUNGER, INTEGRAL PUMP, RAM, OIL RESERVOIR AND INTEGRAL

CARRYING HANDLE; COLLAPSED HEIGHT OF 11 INCHES, MAXIMUM LIFT

HEIGHT OF AT LEAST 17-1/2 INCHES; SUPPLIED WITH 2-PIECE

REMOVABLE PUMP HANDLE.

Enlarge

4240-01-649-2500 FACESHIELD,INDUSTRIAL : COMBINATION HEADGEAR AND FACE SHIELD

SAFETY SYSTEM DESIGNED TO SHIELD THE WEARERS FACE AND EYES IN

CONJUNCTION WITH SPECTACLES OR GOGGLES; HEADGEAR HAS

ADJUSTABLE RATCHET SUSPENSION AND FIVE OR MORE POSITION

ADJUSTABLE CROWN STRAP; 9 INCHES X 14-1/4 INCHES; MEETS ANSI

Z87.1-2003.

Enlarge

7920-00-252-4084 BRUSH,ADHESIVE : ROUND, HOG BRISTLE, 1-1/2 INCH DIAMETER, 2-1/2

INCH BRISTLE LENGTH, SIZE 8.

Enlarge

6145-01-668-3688 WIRE,ELECTRICAL : SPOOL OF BARE COPPER BUILDING WIRE, 6 AWG;

RATED FOR 600 VOLT; MAX AMPS 125; TEMP RATING 167 DEGREES

FAHRENHEIT; NOMINAL DIAMETER 0.162 INCHES, 315 FEET LONG; SOFT

DRAWN (ANNEALED); MEETS ASTM B3.

Enlarge

5130-01-397-9801 DRILL,ELECTRIC,PORTABLE : 1/2" ELECTRIC DRILL, CORDED. VARIABLE

SPEED (0-550 RPM). 6.5 AMP (120V) MOTOR. 2 POSITION SIDE HANDLE.

BELT CLIP, DOUBLE INSULATED. OVERALL LENGTH 11-1/4". INDUSTRIAL

METAL GEAR HOUSING.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UB

UB

UB

UB

UB

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN D

EAN D

EAN D

EAN X

EAN X

FTN X

EAN D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

8030-01-620-4672 CORROSION PREVENTIVE COMPOUND : BOESHIELD T-9, 12 OUNCE

AEROSOL; RUST AND CORROSION PROTECTION, WATERPROOF

LUBRICATION.

Enlarge

8030-01-620-4672 KIT, SCREW THREADINSERT : PORTABLE TOOL KIT TO EXTRACT/INSTALL

HELICAL COIL INSERT

Enlarge

4131-2-1:1HUU4 KIT, SCREW THREAD INSERT, 8-32 UNC : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 8-32 UNIFIED

NATIONAL COURSE (UNC) THREADS; KIT CONTAINS ONE SCREW

THREAD INSERT (STI) EXTRACTOR TOOL, TEN FREE RUNNING THREAD

INSERTS 0.246 INCHES LONG, TEN FREE RUNNING INSERTS 0 328

INCHES LONG, TEN SELF-LOCKING INSERTS 0.246 INCHES LONG, TEN

SELF-LOCKING INSERTS 0.328 INCHES LONG, TWO TAPS, ONE INSERTER

TOOL, ONE TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX;

EXTRACTOR SHALL ACCOMMODATE 3 TO 8 UNC OR UNIFIED NATIONAL

FINE (UNF) INSERTS; INSERTS SHALL BE STAINLESS STEEL 8-32 UNC,

0.205 TO 0.220 INCHES OUTSIDE DIAMETER (OD); TAPS SHALL BE

THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 8-32 STI THREAD,

THREAD CLASS 3B; INSERTER AND TANG BREAK OFF TOOLS SHALL

ACCOMMODATE 8-32 UNC INSERTS.

Enlarge

4131-3-1:1HUU4 KIT, SCREW THREAD INSERT, 10-24 UNC : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 10-24 UNIFIED

NATIONAL COURSE (UNC) THREADS; KIT CONTAINS ONE SCREW

THREAD INSERT (STI) EXTRACTOR TOOL, TEN FREE RUNNING THREAD

INSERTS 0.285 INCHES LONG, TEN FREE RUNNING INSERTS0.380

INCHES LONG, TEN SELF-LOCKING INSERTS 0.285 INCHES LONG, TEN

SELF-LOCKING INSERTS 0.380 INCHES LONG, TWO TAPS, ONE INSERTER

TOOL, ONE TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX;

EXTRACTOR SHALL ACCOMMODATE 10 TO 3/8 INCH UNC OR UNIFIED

NATIONAL FINE (UNF) INSERTS; INSERTS SHALL BE STAINLESS STEEL 10-

24 UNC, 0.244 TO 0.259 INCHES OUTSIDE DIAMETER (OD); TAPS SHALL

BE THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 10-24 STI THREAD,

THREAD CLASS 3B; INSERTER AND TANG BREAK OFF TOOLS SHALL

ACCOMMODATE 10-24 UNC INSERTS.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UB

UB

MB

MB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

OZN

OZN

EAN D

EAN D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

4132-3-1:1HUU4 KIT, SCREW THREAD INSERT, 10-32 UNF : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 10-32 UNIFIED

NATIONAL FINE (UNF) THREADS; KIT CONTAINS ONE SCREW THREAD

INSERT (STI) EXTRACTOR TOOL, TEN FREE RUNNING THREAD INSERTS

0.285 INCHES LONG, TEN FREE RUNNING INSERTS 0.380 INCHES LONG,

TEN SELF-LOCKING INSERTS 0.285 INCHES LONG, TEN SELF-LOCKING

INSERTS 0.380 INCHES LONG, TWO TAPS, ONE INSERTER TOOL, ONE

TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX; EXTRACTOR

SHALL ACCOMMODATE 10 TO 3/8 INCH UNF OR UNIFIED NATIONAL

COURSE (UNC) INSERTS; INSERTS SHALL BE STAINLESS STEEL 10-32

UNF, 0.236 TO 0.256 INCHES OUTSIDE DIAMETER (OD); TAPS SHALL BE

THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 10-32 STI THREAD,

THREAD CLASS 3B; INSERTER AND TANG BREAK OFF TOOLS SHALL

ACCOMMODATE 10-32 UNF INSERTS.

Enlarge

4131-1-1:1HUU4 KIT, SCREW THREAD INSERT, 12-24 UNC : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 12-24 UNIFIED

NATIONAL COURSE (UNC) THREADS; KIT CONTAINS ONE SCREW

THREAD INSERT (STI) EXTRACTOR TOOL, TEN FREE RUNNING THREAD

INSERTS 0.324 INCHES LONG, TEN FREE RUNNING INSERTS0.432

INCHES LONG, TEN SELF-LOCKING INSERTS 0.432 INCHES LONG, TWO

TAPS, ONE INSERTER TOOL, ONE TANG BREAK OFF TOOL, AND ONE

PORTABLE TOOL BOX; EXTRACTOR SHALL ACCOMMODATE 10 TO 3/8

INCH UNC OR UNIFIED NATIONAL FINE (UNF) INSERTS; INSERTS SHALL

BE STAINLESS STEEL 12-24 UNC, 0.270 TO 0.285 INCHES OUTSIDE

DIAMETER (OD); TAPS SHALL BE THREAD CUTTING, PLUG TYPE, RIGHT

HAND FOR 12-24 STI THREAD, THREAD CLASS 3B; INSERTER AND TANG

BREAK OFF TOOLS SHALL ACCOMMODATE 12-24 UNC INSERTS.

Enlarge

4131-4-1:1HUU4 KIT, SCREW THREAD INSERT, 1/4-20 UNC : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 1/4-20 UNIFIED

NATIONAL COURSE (UNC) THREADS; KIT CONTAINS ONE SCREW

THREAD INSERT (STI) EXTRACTOR TOOL, TEN FREE RUNNING THREAD

INSERTS 0.375 INCHES LONG, TEN FREE RUNNING INSERTS0.500

INCHES LONG, TEN SELF-LOCKING INSERTS 0.375 INCHES LONG, TEN

SELF-LOCKING INSERTS 0.500 INCHES LONG, TWO TAPS, ONE INSERTER

TOOL, ONE TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX;

EXTRACTOR SHALL ACCOMMODATE 10 TO 3/8 INCH UNC OR UNIFIED

NATIONAL FINE (UNF) INSERTS; INSERTS SHALL BE STAINLESS STEEL

1/4-20 UNC, 0.310 TO 0.330 INCHES OUTSIDE DIAMETER (OD); TAPS

SHALL BE THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 1/4-20 STI

THREAD, THREAD CLASS 3B; INSERTER AND TANG BREAK OFF TOOLS

SHALL ACCOMMODATE 1/4-20 UNC INSERTS.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

MB

MB

MB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN D

EAN D

EAN D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

4132-4-1:1HUU4 KIT, SCREW THREAD INSERT, 1/4-28 UNF : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 1/4-28 UNIFIED

NATIONAL FINE (UNF) THREADS; KIT CONTAINS ONE SCREW THREAD

INSERT (STI) EXTRACTOR TOOL, TEN FREE RUNNING THREAD INSERTS

0.375 INCHES LONG, TEN FREE RUNNING INSERTS 0 500 INCHES LONG,

TEN SELF-LOCKING INSERTS 0.375 INCHES LONG, TEN SELF-LOCKING

INSERTS 0.500 INCHES LONG, TWO TAPS, ONE INSERTER TOOL, ONE

TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX; EXTRACTOR

SHALL ACCOMMODATE 10 TO 3/8 INCH UNF OR UNIFIED NATIONAL

COURSE (UNC) INSERTS; INSERTS SHALL BE STAINLESS STEEL 1/4-28

UNF, 0.306 TO 0.326 INCHES OUTSIDE DIAMETER (OD); TAPS SHALL BE

THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 1/4-28 STI THREAD,

THREAD CLASS 3B; INSERTER AND TANG BREAK OFF TOOLS SHALL

ACCOMMODATE 1/4-28 UNF INSERTS.

Enlarge

4132-4-1:1HUU4 KIT, SCREW THREADINSERT PORTABLE TOOL KIT TO EXTRACT/INSTALL

HELICAL COIL INSERTS

Enlarge

4132-5-1:1HUU4 KIT, SCREW THREAD INSERT, 5/16-24 : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 5/16-24 UNIFIED

NATIONAL FINE (UNF) THREADS; KIT CONTAINS ONE SCREW THREAD

INSERT (STI) EXTRACTOR TOOL, EIGHT FREE RUNNING THREAD INSERTS

0.469 INCHES LONG, EIGHT FREE RUNNING INSERTS 0.625 INCHES

LONG, EIGHT SELF-LOCKING INSERTS 0.469 INCHES LONG, EIGHT SELF-

LOCKING INSERTS 0.625 INCHES LONG, ONE TAP, ONE INSERTER TOOL,

ONE TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX;

EXTRACTOR SHALL ACCOMMODATE 10 TO 3/8 INCH UNF OR UNIFIED

NATIONAL COURSE (UNC) INSERTS; INSERTS SHALL BE STAINLESS

STEEL 5/16-24 UNF, 0.380 TO 0.400 INCHES OUTSIDE DIAMETER (OD);

TAP SHALL BE THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 5/16-24

STI THREAD, THREAD CLASS 3B; INSERTER AND TANG BREAK OFF

TOOLS SHALL ACCOMMODATE 5/16-24 UNF INSERTS.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

MB

MB

MB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN D

EAN D

EAN D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

4131-5-1:1HUU4 KIT, SCREW THREAD INSERT, 5/16-18 : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 5/16-18 UNIFIED

NATIONAL COURSE (UNC) THREADS; KIT CONTAINS ONE SCREW

THREAD INSERT (STI) EXTRACTOR TOOL, EIGHT FREE RUNNING THREAD

INSERTS 0.469 INCHES LONG, EIGHT FREE RUNNING INSERTS 0.625

INCHES LONG, EIGHT SELF-LOCKING INSERTS 0.469 INCHES LONG,

EIGHT SELF-LOCKING INSERTS 0.625 INCHES LONG, ONE TAP, ONE

INSERTER TOOL, ONE TANG BREAK OFF TOOL, AND ONE PORTABLE

TOOL BOX; EXTRACTOR SHALL ACCOMMODATE 10 TO 3/8 INCH UNC OR

UNIFIED NATIONAL FINE (UNF) INSERTS; INSERTS SHALL BE STAINLESS

STEEL 5/16-18 UNC, 0.380 TO 0.400 INCHES OUTSIDE DIAMETER (OD);

TAP SHALL BE THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 5/16-18

STI THREAD, THREAD CLASS 3B; INSERTER AND TANG BREAK OFF

TOOLS SHALL ACCOMMODATE 5/16-18 UNC INSERTS.

Enlarge

4132-6-1:1HUU4 KIT, SCREW THREAD INSERT, 3/8-24 : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 3/8-24 UNIFIED

NATIONAL FINE (UNF) THREADS; KIT CONTAINS ONE SCREW THREAD

INSERT (STI) EXTRACTOR TOOL, EIGHT FREE RUNNING THREAD INSERTS

0.562 INCHES LONG, EIGHT FREE RUNNING INSERTS 0.750 INCHES

LONG, EIGHT SELF-LOCKING INSERTS 0.562 INCHES LONG, EIGHT SELF-

LOCKING INSERTS 0.750 INCHES LONG, ONE TAP, ONE INSERTER TOOL,

ONE TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX;

EXTRACTOR SHALL ACCOMMODATE 10 TO 3/8 INCH UNF OR UNIFIED

NATIONAL COURSE (UNC) INSERTS; INSERTS SHALL BE STAINLESS

STEEL 3/8-24 UNF, 0.448 TO 0.468 INCHES OUTSIDE DIAMETER (OD);

TAP SHALL BE THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 3/8-24

STI THREAD, THREAD CLASS 3B; INSERTER AND TANG BREAK OFF

TOOLS SHALL ACCOMMODATE 3/8-24 UNF INSERTS.

Enlarge

4131-6-1:1HUU4 KIT, SCREW THREAD INSERT, 3/8-16 : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 3/8-16 UNIFIED

NATIONAL COURSE (UNC) THREADS; KIT CONTAINS ONE SCREW

THREAD INSERT (STI) EXTRACTOR TOOL, EIGHT FREE RUNNING THREAD

INSERTS 0.562 INCHES LONG, EIGHT FREE RUNNING INSERTS 0.750

INCHES LONG, EIGHT SELF-LOCKING INSERTS 0.562 INCHES LONG,

EIGHT SELF-LOCKING INSERTS 0.750 INCHES LONG, ONE TAP, ONE

INSERTER TOOL, ONE TANG BREAK OFF TOOL, AND ONE PORTABLE

TOOL BOX; EXTRACTOR SHALL ACCOMMODATE 10 TO 3/8 INCH UNC OR

UNIFIED NATIONAL FINE (UNF) INSERTS; INSERTS SHALL BE STAINLESS

STEEL 3/8-16 UNC, 0.452 TO 0.472 INCHES OUTSIDE DIAMETER (OD);

TAP SHALL BE THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 3/8-16

STI THREAD, THREAD CLASS 3B; INSERTER AND TANG BREAK OFF

TOOLS SHALL ACCOMMODATE 3/8-16 UNC INSERTS.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

MB

MB

MB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN D

EAN D

EAN D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

4132-7-1:1HUU4 KIT, SCREW THREAD INSERT, 7/16-20 : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 7/16-20 UNIFIED

NATIONAL FINE (UNF) THREADS; KIT CONTAINS ONE SCREW THREAD

INSERT (STI) EXTRACTOR TOOL, SIX FREE RUNNING THREAD INSERTS

0.656 INCHES LONG, SIX FREE RUNNING INSERTS0.875 INCHES LONG,

SIX SELF-LOCKING INSERTS 0.656 INCHES LONG, SIX SELF-LOCKING

INSERTS 0.875 INCHES LONG, ONE TAP, ONE INSERTER TOOL, ONE

TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX; EXTRACTOR

SHALL ACCOMMODATE 7/16 TO 1 INCH UNF OR UNIFIED NATIONAL

COURSE (UNC) INSERTS; INSERTS SHALL BE STAINLESS STEEL 7/16-20

UNF, 0.524 TO 0.549 INCHES OUTSIDE DIAMETER (OD); TAP SHALL BE

THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 7/16-20 STI THREAD,

THREAD CLASS 3B; INSERTER AND TANG BREAK OFF TOOLS SHALL

ACCOMMODATE 7/16-20 UNF INSERTS.

Enlarge

4131-7-1:1HUU4 KIT, SCREW THREAD INSERT, 7/16-14 : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 7/16-14 UNIFIED

NATIONAL COURSE (UNC) THREADS; KIT CONTAINS ONE SCREW

THREAD INSERT (STI) EXTRACTOR TOOL, SIX FREE RUNNING THREAD

INSERTS 0.656 INCHES LONG, SIX FREE RUNNING INSERTS 0.875

INCHES LONG, SIX SELF-LOCKING INSERTS 0.656 INCHES LONG, SIX

SELF-LOCKING INSERTS 0.875 INCHES LONG, ONE TAP, ONE INSERTER

TOOL, ONE TANG BREAK OFF TOOL, AND ONE PORTABLE TOOL BOX;

EXTRACTOR SHALL ACCOMMODATE 7/16 TO 1 INCH UNC OR UNIFIED

NATIONAL FINE (UNF) INSERTS; INSERTS SHALL BE STAINLESS STEEL

7/16-14 UNC, 0.526 TO 0.551 INCHES OUTSIDE DIAMETER (OD); TAP

SHALL BE THREAD CUTTING, PLUG TYPE, RIGHT HAND FOR 7/16-14 STI

THREAD, THREAD CLASS 3B; INSERTER AND TANG BREAK OFF TOOLS

SHALL ACCOMMODATE 7/16-14 UNC INSERTS.

Enlarge

4132-8-1:1HUU4 KIT, SCREW THREAD INSERT, 1/2-20 : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 1/2-20 UNIFIED

NATIONAL FINE (UNF) THREADS; KIT CONTAINS ONE SCREW THREAD

INSERT (STI) EXTRACTOR TOOL, SIX FREE RUNNING THREAD INSERTS

0.750 INCHES LONG, SIX SELF-LOCKING INSERTS 0 750 INCHES LONG,

ONE TAP, ONE INSERTER TOOL, ONE TANG BREAK OFF TOOL, AND ONE

PORTABLE TOOL BOX; EXTRACTOR SHALL ACCOMMODATE 7/16 TO 1

INCH UNF OR UNIFIED NATIONAL COURSE (UNC) INSERTS; INSERTS

SHALL BE STAINLESS STEEL 1/2-20 UNF, 0.592 TO 0.617 INCHES

OUTSIDE DIAMETER (OD); TAP SHALL BE THREAD CUTTING, PLUG TYPE,

RIGHT HAND FOR 1/2-20 STI THREAD, THREAD CLASS 3B; INSERTER

AND TANG BREAK OFF TOOLS SHALL ACCOMMODATE 1/2-20 UNF

INSERTS.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

MB

MB

MB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN D

EAN D

EAN D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

4131-8-1:1HUU4 KIT, SCREW THREAD INSERT, 1/2-13 : PORTABLE TOOL KIT TO

EXTRACT/INSTALL HELICAL COIL INSERTS TO REPAIR 1/2-13 UNIFIED

NATIONAL COURSE (UNC) THREADS; KIT CONTAINS ONE SCREW

THREAD INSERT (STI) EXTRACTOR TOOL, SIX FREE RUNNING THREAD

INSERTS 0.750 INCHES LONG, SIX SELF-LOCKING INSERTS0.750 INCHES

LONG, ONE TAP, ONE INSERTER TOOL, ONE TANG BREAK OFF TOOL,

AND ONE PORTABLE TOOL BOX; EXTRACTOR SHALL ACCOMMODATE

7/16 TO 1 INCH UNC OR UNIFIED NATIONAL FINE (UNF) INSERTS;

INSERTS SHALL BE STAINLESS STEEL 1/2-13 UNC, 0.597 TO 0.622

INCHES OUTSIDE DIAMETER (OD); TAP SHALL BE THREAD CUTTING,

PLUG TYPE, RIGHT HAND FOR 1/2-13 STI THREAD, THREAD CLASS 3B;

INSERTER AND TANG BREAK OFF TOOLS SHALL ACCOMMODATE 1/2-13

UNC INSERTS.

Enlarge

5140-01-627-6742 PANEL,INSERT,TOOL BOX : SEE DRAWING 11A7000409; CONSISTS OF 1

EACH 1/8" THICK POLYETHYLENE HARD BACKER DWG. 11A7000213, 1

EACH 1.5" THICK FOAM DWG. 11A7000218 AND FOAM ADHESIVE DWG.

11A7000568.

Enlarge

5120-01-661-6295 HAMMER,HAND : HEAD WEIGHT BALL-PEEN HAMMER; NOMINAL 13

INCHES LONG; 20 OUNCE WEIGHT; FIBERGLASS HANDLE.

Enlarge

5120-01-661-6300 HAMMER,HAND : NON-MARRING BRASS SAFETY HAMMER; NOMINAL 15

INCH HANDLE; 4 INCH HEAD LENGTH; FACE DIA OF 1-1/2 INCHES; 3

POUND WEIGHT; FIBERGLASS HANDLE WITH RUBBER GRIP; NON-

MARRING BRASS HEAD.

Enlarge

5120-01-649-7737 HAMMER,HAND : DEAD BLOW BALL-PEEN HAMMER; NOMINAL 13-5/8

INCHES LONG; HEAD LENGTH 5-3/4 INCHES; FACE DIA. 1-3/4 INCHES; 32

OUNCE WEIGHT; RUBBER COATED COMPOSITE SHANK HANDLE.

Enlarge

5120-01-661-6282 HAMMER,HAND : DEAD BLOW HAMMER; NOMINAL 14-1/4 INCHES LONG;

HEAD LENGTH 4-5/8 INCHES; FACE DIA. 2.1 INCHES; 42 OUNCE WEIGHT;

SOFT FACED TO PREVENT MARRING; STEEL REINFORCED HANDLE THAT

RESISTS BREAKING ON OVERSTRIKE; URETHANE COATED.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

MB

UB

UB

UB

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN D

EAN D

EAN X

EAN D

EAN X

EAN X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5120-01-428-5152 HAMMER,HAND : DEAD BLOW HAMMER; NOMINAL 12-7/8 INCHES LONG;

HEAD LENGTH 4-1/16 INCHES; FACE DIA. 1.8 INCHES; 21 OUNCE HEAD

WEIGHT; SOFT FACED TO PREVENT MARRING; STEEL REINFORCED

HANDLE THAT RESISTS BREAKING ON OVERSTRIKE; URETHANE COATED.

Enlarge

5210-01-661-6296 PLUMB BOB : CONSTRUCTION PLUMB LINE REEL; RETRACTABLE WITH

STEEL CLOCK SPRING; 12 FOOT LENGTH.

Enlarge

5110-01-661-6313 FILE SET,HAND : ULTRA FINE GRIT STONES FOR HONING AND

POLISHING; 1 EACH OF THE FOLLOWING FILES: 3" X 1/4" SQUARE, 3" X

1/4" TRIANGLE, 3" X 1/4" ROUND, AND 3" X 3/4"X 1/8" KNIFE; INCLUDES

STORAGE CASE.

Enlarge

5345-00-584-4516 STONE,SHARPENING : ULTRA FINE ROUND EDGE NATURAL SLIP STONE;

4 INCHES LONG X 1-1/4 INCHES TALL X 1/4 INCH THICK ON THE SQUARE

EDGE AND 1/8 INCH THICK ON THE ROUND EDGE.

Enlarge

5110-01-661-6750 SHEARS,METAL CUTTING,HAND : 8 INCH STRAIGHT TINNER SNIP; 1-3/4

INCH CUT LENGTH; MEETS ASME B107.500-2010 (B107.16).

Enlarge

5120-01-661-6741 PUNCH,DRIVE PIN : 1/8 INCH DRIVE PIN PUNCH; 4 INCHES LONG;

HARDENED TOOL STEEL; KNURLED BODY.

Enlarge

5120-01-661-6744 PUNCH,DRIVE PIN : 1/8 INCH DRIVE PIN PUNCH; 8 INCHES LONG WITH 3-

1/2 INCH DRIVE PIN SECTION; HARDENED TOOL STEEL; KNURLED BODY.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UB

UB

UB

UB

UB

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN X

EAN X

EAN D

EAN X

EAN X

EAN X

EAN X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5120-01-661-6749 PUNCH,DRIVE PIN : 1/16 INCH DRIVE PIN PUNCH; 4 INCHES LONG;

HARDENED TOOL STEEL; KNURLED BODY.

Enlarge

5210-01-661-6322 PLUMB BOB : 8 OUNCE; 4 INCHES LONG; BRASS; WITH REPLACEABLE

HARDENED STEEL POINT

Enlarge

5120-01-661-6770 INSERTER AND REMOVER,PNEUMATIC TIRE VA : THE DOUBLE ENDED

CORE DRIVER REVERSES IN THE TOOL BODY. THE REVERSIBLE DRIVER

FITS BOTH LARGE AND SMALL VALVE CORES. USE THE REVERSE END TO

REMOVE AND INSTALL VALVE CORE CAPS. THE LONG TOOL HANDLE

WILL ACCESS INSIDE DUAL WHEELS. THE LIGHTWEIGHT ALUMINUM

BODY IS EQUIPPED WITH A POCKET CLIP.

Enlarge

5110-01-661-6284 FRAME,HAND HACKSAW STEEL OR SIMILAR MATERIAL WITH A

HARDRUBBER OR PLASTIC PISTOL/OPEN GRIP: ADJUSTABLE FOR 8 INCH,

10INCH AND 12 INCH BLADES; 3 INCH MINIMUM DEPTH OF CUT.

Enlarge

5110-01-661-6320 BLADE,HAND HACKSAW : BLADE SHALL BE NOMINALLY 12 INCHES

LONGS; 24 TEETH PER INCH; 1/2 INCH WIDE; 0.025 +/- 0.003 INCHES

THICK; BI-METAL BLADE SUITABLE FOR CUTTING MEDIUM GAUGE

METALS UP TO 1/4" INCH THICK; PACKAGE OF 10 IN PLASTIC STORAGE

TUBE.

Enlarge

5110-01-661-6764 BLADE,HAND HACKSAW : BLADE SHALL BE NOMINALLY 12 INCHES

LONGS; 32 TEETH PER INCH; 1/2 INCH WIDE; 0.025 +/- 0.003 INCHES

THICK; BI-METAL BLADE SUITABLE FOR CUTTING MEDIUM GAUGE

METALS UP TO 1/4" INCH THICK; PACKAGE OF 10 IN PLASTIC STORAGE

TUBE.

Enlarge

5345-01-661-6311 STONE,SHARPENING : SILICON CARBIDE ABRASIVE MATERIAL;

COMBINATION GRIT COURSE AND FINE; 6 INCHES LONG X 2 INCHES

WIDE X 1 INCH THICK.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UB

UB

UB

UB

UB

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN X

EAN X

EAN X

EAN D

EAN X

EAN X

EAN X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5140-01-627-6740 PANEL,INSERT,TOOL BOX : SEE DRAWING 11A7000410; CONSISTS OF 1

EACH 1/8" THICK POLYETHYLENE HARD BACKER DWG. 11A7000213, 1

EACH 1.5" THICK FOAM DWG. 11A7000219 AND FOAM ADHESIVE DWG.

11A7000568.

Enlarge

5120-01-661-5821 PULLER,MECHANICAL : SCREW TYPE PULLER WITH HEAD GUIDE;

CAPACITY: 7/8" TO 2" I.D. REACH: 1.0", U-SHAPED BODY WITH 2 PRONG

JAW; DESIGNED TO PULL FLYWHEEL PILOT BEARINGS IN CLOSE

QUARTERS WHERE A SLIDE HAMMER CANNOT BE USED.

Enlarge

5120-01-652-0458 PULLER,MECHANICAL : FORGED STEEL GEAR AND BEARING PULLER;

DOUBLE-END JAWS FOR INTERNAL AND EXTERNAL GRIPS; 0 TO 6 INCH

SPREAD RANGE; 3-1/4 INCH REACH; 5-TON CAPACITY.

Enlarge

5120-01-661-6283 CLAMP,C : HEAVY DUTY FORGED STEEL CLAMP WITH BLACK-OXIDE

FINISH; SHALL HAVE 2 INCH THROAT DEPTH AND A 3 INCH MINIMUM

JAW OPENING WITH THE SCREW FULLY OPENED AND AN OPENING OF

ZERO WHEN CLOSED; THE SCREW SHALL HAVE A SWIVEL PAD AND A

SLIDING CROSS PIN HANDLE;8,750 POUND NOMINAL CLAMPING

PRESSURE.

Enlarge

5120-01-661-5813 KEY SET,SOCKET HEADSCREW : 20 PIECE SAE HEX-KEY SET, HEAT

TREATED, FINISHED TO PREVENT RUST, CONTAINS 0.028, 0.035, 0.050,

1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, AND 3/4 INCH WRENCHES; INCLUDES STORAGE POUCH.

THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND RECEIPT,

ISSUED WITH THE TOOL SET, QUANTITIES ON HAND ESTABLISHED

BYOWNING UNIT.

Enlarge

5120-01-652-2416 KEY,SOCKET HEAD SCREW 0.028 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-652-2411 KEY,SOCKET HEAD SCREW 0.035 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UB

UB

UB

UB

UB

UC

UC

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN D

EAN D

EAN X

EAN D

EAN X

EAN X

EAN X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5120-01-397-5876 KEY,SOCKET HEAD SCREW 0.050 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-652-2412 KEY,SOCKET HEAD SCREW 0.063 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5877 KEY,SOCKET HEAD SCREW 0.078 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5880 KEY,SOCKET HEAD SCREW 0.094 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-398-7654 KEY,SOCKET HEAD SCREW 0.109 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5879 KEY,SOCKET HEAD SCREW 0.125 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5881 KEY,SOCKET HEAD SCREW 0.141 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UC

UC

UC

UC

UC

UC

UC

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN X

EAN X

EAN X

EAN X

EAN X

EAN X

EAN X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5120-01-397-5882 KEY,SOCKET HEAD SCREW 0.156 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5814 KEY,SOCKET HEAD SCREW 0.188 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5813 KEY,SOCKET HEAD SCREW 0.219 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-652-2419 KEY,SOCKET HEAD SCREW 0.250 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-652-2410 KEY,SOCKET HEAD SCREW 3.750 INCHES NOMINAL LONG ARM LENGTH;

1.250 INCHES NOMINAL SHORT ARM LENGTH; 0.313 INCHES NOMINAL

BOTH ENDS WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS

EXTERNAL WRENCHING SURFACE SHAPE; OXIDE SURFACE TREATMENT;

L-HANDLE; STEEL MATERIAL; THIS ITEM COMESWITH A

MANUFACTURER'S STATED COMMERCIAL WARRANTY

Enlarge

5120-01-397-5817 KEY,SOCKET HEAD SCREW 0.375 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5819 KEY,SOCKET HEAD SCREW 0.438 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UC

UC

UC

UC

UC

UC

MC

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN X

EAN X

EAN X

EAN X

EAN X

EAN X

EAN X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5120-01-397-5818 KEY,SOCKET HEAD SCREW 0.500 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5821 KEY,SOCKET HEAD SCREW 0.563 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-652-2426 KEY,SOCKET HEAD SCREW 0.625 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5120-01-397-5823 KEY,SOCKET HEAD SCREW 0.750 INCHES NOMINAL BOTH ENDS

WRENCHING SURFACE SIZE; HEXAGON BOTH ENDS EXTERNAL

WRENCHING SURFACE SHAPE; SHORT SERIES; L-HANDLE; STEEL

MATERIAL; THIS ITEM COMES WITH A MANUFACTURER'S STATED

COMMERCIAL WARRANTY

Enlarge

5110-01-661-6695 CUTTER,TUBE : TUBING CUTTER WITH ENCLOSED FEED MECHANISM

DESIGNED TO CUT BETWEEN 1/8" TO 1-1/8" OUTSIDE DIA. TUBING;

CUTS COPPER, BRASS, AND ALUMINUM TUBING AND THIN-WALL

CONDUIT; CLOSE FLARE CUTOFF FEATURE AND FOLD-AWAY REAMER

INCLUDED. MADE FROM HIGH STRENGTHZINC ALLOY WITH A SPARE

CUTTER WHEEL IN THE HANDLE.

Enlarge

5120-00-251-2267 FLARING TOOL,TUBE,HAND 45 DEGREE FLARING, DOUBLE FLARING,

SWAGING AND CUTTING KIT. FOR FLARING AND CUTTING SOFT COPPER,

ALUMINUM, STEEL, STAINLESS STEEL AND BRASS TUBING. INCLUDES

TUBE CUTTER FOR 1/8" TO 1 1/8" OUTSIDE DIAMETER TUBING AND 45

DEGREE FLARING AND SWAGING TOOL KIT INCLUDES SINGLE FLARING

TOOLS FOR 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8", AND 3/4" OD

TUBING; DOUBLE FLARING TOOLS FOR 3/16",1/4",5/16",3/8", AND 1/2"

OD TUBING; AND SWAGING TOOLS FOR 3/16",1/4", 5/16", 3/8",1/2",5/8",

AND 3/4" OD TUBING. SWIVEL-TYPE SWAGING ADAPTERS AND FLARING

CONE ARE HARDENED STEEL, CHROME FINISHED. INCLUDES TOOL

CASE.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UC

UC

UC

UC

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN X

EAN X

EAN X

EAN D

EAN X

EAN D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5110-00-288-6520 CUTTER,TUBE 0.125 INCHES MINIMUM AND 1.125 INCHES MAXIMUM

TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED; ENCLOSED FEED

MECHANISM; CLOSE FLARE CUTOFF FEATURE PROVIDED; DEBURRING

TOOL PROVIDED; THIS ITEM COMES WITH A LIFETIME WARRANTY

Enlarge

1005-01-668-6986 RECEIVER,SMALL ARMS AR15/M16 UPPER RECEIVER ACTION VISE

BLOCK: HEAVY-DUTY BLOCKS ALLOW YOU TO FIRMLY CLAMP RECEIVER

HALVES IN A VISE WITHOUT RISK OF CRUSHING, TWISTING, OR

OTHERWISE DISTORTING THEM WHEN APPLYING VISE PRESSURE OR

TORQUEING THE BARREL NUT. KEEPS YOUR RIFLE SECURE FOR SAFE,

EFFECTIVE CLEANING, ASSEMBLY, AND REPAIR. HIGH PRESSURE,

SOLVENT RESISTANT, STRUCTURAL BLOCK AND INSERT SURROUND THE

ENTIRE UPPER RECEIVER AND SUPPORT IT INSIDE AND OUT TO MAKE

REBARRELING THE AR-15/M16 AN EASY, ONE-MAN JOB. LETS YOU

TIGHTLY CLAMP A CARRY HANDLE RECEIVER OR FLATTOP RECEIVER IN

A LARGE BENCH VISE FOR BARREL REMOVAL/INSTALLATION. MINIMIZES

THE POSSIBILITY OF DAMAGE TO THE BARREL DETENT PIN AND

RECEIVER DETENT NOTCH. HOLDS SECURELY WITHOUT MARRING THE

FINISH. INJECTION MOLDED RYNITE, BLACK. FITS A1, A2, AND

STANDARD FLATTOP RECEIVERS. BLOCK - 2.5 INCHES THICK, 3.5

INCHES WIDE, 4.5 INCHES HIGH. INSERT - 8 INCHES LONG, 1 INCH

DIAMETER. TORQUE TESTED TO 200 FT. LBS.

Enlarge

1005-01-667-8175 LOWER BLOCK VISE AR-15/M16 LOWER RECEIVER VISE BLOCK: HEAVY-

DUTY BLOCKS ALLOW YOU TO FIRMLY CLAMP AR-15/M16 RECEIVER

HALVES IN A VISE WITHOUT RISK OF CRUSHING, TWISTING, OR

OTHERWISE DISTORTING THEM WHEN APPLYING VISE PRESSURE OR

TORQUEING THE BARREL NUT. KEEPS YOURRIFLE SECURE FOR SAFE,

EFFECTIVE CLEANING, ASSEMBLY, AND REPAIR. UNBREAKABLE

URETHANE VISE BLOCK TAKES ALL THE CLAMPING FORCE, SO YOUR

EXPENSIVE LOWER RECEIVER WON'T BE DAMAGED OR DISTORTED.

INSERT BLOCK INTO THE MAGAZINE HOUSING FROM THE TOP OR

BOTTOM, THEN CLAMP THE OTHER END IN YOUR BENCH VISE. THE

MAGAZINE CATCH LOCKS TO THE BLOCK, SAFELY AND SECURELY

HOLDING THE RIFLE FOR ASSEMBLY, DISASSEMBLY, CLEANING, OR

REPAIR. WILL NOT MAR OR SCRATCH THE FINISH. FITS TIGHTLY IN MOST

RECEIVERS AND MAY REQUIRE FILLING TO FIT OTHERS. HIGH DENSITY

URETHANE PLASTIC, BLACK. 5 INCHES HIGH, 2-1/4 INCHES WIDE, 3/4

INCH THICK.

Enlarge

5120-01-662-0014 WRENCH SET,SOCKET : 1/4 INCH DRIVE SET INCLUDES RATCHET,

UNIVERSAL JOINT, 2 INCH EXTENSION, 6 POINT SOCKETS (3/16, 7/32,

1/4, 9/32, 5/16, 11/32, 3/8, 7/16, AND 1/2 INCH), RETAINING FOAM

INSERT, AND STORAGE CASE (8-3/8 INCHES LONG X 4-5/8 INCHES WIDE

X 1-3/4 INCHES THICK); MEETS ASME B107.110.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UC

7B

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAC X

EAN X

EAN X

EAN D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5120-01-648-5664 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH, OVERALL LENGTH

2.000 INCHES NOMINAL, END ITEM IDENTIFICATION SATS , WRENCHING

SURFACE SIZE 0.219 INCHES NOMINAL SINGLE END, DRIVE SURFACE

SIZE 0.250 INCHES NOMINAL SINGLE END , FEATURES PROVIDED

MANUAL TOOL, WRENCHING SURFACE SHAPE 6 POINT SINGLE END

INTERNAL, DRIVE END SHAPE SQUARE SINGLE END INTERNAL,

MATERIAL STEEL OVERALL, SURFACE TREATMENT CHROMIUM OVERALL,

STYLE DESIGNATOR INTERNAL-INTERNAL. THIS IS A CONSUMABLE

ITEM, NONACCOUNTABLE ON HAND RECEIPT, ISSUED WITH THE TOOL

SET, QUANTITIES ON HAND ESTABLISHED BY OWNING UNIT.

Enlarge

5120-01-650-3036 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH,OVERALL LENGTH

0.875 INCHES NOMINAL, END ITEM IDENTIFICATION ARSS,WRENCHING

SURFACE SIZE 0.219 INCHES NOMINAL SINGLE END, DRIVE SURFACE

SIZE 0.250 INCHES NOMINAL SINGLE END,FEATURES PROVIDED

MANUAL TOOL, WRENCHING SURFACE SHAPE 6POINT SINGLE END

INTERNAL, DRIVE END SHAPE SQUARE SINGLE END INTERNAL,

MATERIAL STEEL OVERALL,SURFACE TREATMENT CHROMIUM OVERALL,

STYLE DESIGNATOR INTERNAL-INTERNAL. THIS IS A CONSUMABLE

ITEM, NONACCOUNTABLE ON HAND RECEIPT, ISSUED WITH THE TOOL

SET, QUANTITIES ON HAND ESTABLISHED BY OWNING UNIT.

Enlarge

5120-01-335-0964 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH, OVERALL LENGTH

2.000 INCHES NOMINAL, WRENCHING SURFACE SIZE 0.281 INCHES

NOMINAL SINGLE END, DRIVE SURFACE SIZE 0.250 INCHES NOMINAL

SINGLE END, FEATURES PROVIDED MANUAL TOOL, WRENCHING

SURFACE SHAPE 12 POINT SINGLE END INTERNAL DRIVE END SHAPE

SQUARE SINGLE END INTERNAL, MATERIAL STEEL OVERALL, SURFACE

TREATMENT CHROMIUM OVERALL, STYLE DESIGNATOR INTERNAL-

INTERNAL. THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND

RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

Enlarge

5120-01-650-3035 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH, OVERALL LENGTH

0.875 INCHES NOMINAL, END ITEM IDENTIFICATION ARSS, WRENCHING

SURFACE SIZE 0.281 INCHES NOMINAL SINGLE END, DRIVE SURFACE

SIZE 0.250 INCHES NOMINAL SINGLE END, FEATURES PROVIDED

MANUAL TOOL, WRENCHING SURFACE SHAPE 6 POINT SINGLE END

INTERNAL, DRIVE END SHAPE SQUARE SINGLE END INTERNAL,

MATERIAL STEEL OVERALL, SURFACE TREATMENT CHROMIUM OVERALL,

STYLE DESIGNATOR INTERNAL-INTERNAL. THIS IS A CONSUMABLE

ITEM, NONACCOUNTABLE ON HAND RECEIPT, ISSUED WITH THE TOOL

SET, QUANTITIES ON HAND ESTABLISHED BY OWNING UNIT.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UC

UC

MC

UC

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAC X

EAC X

EAC D

EAC X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5120-01-650-3018 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH, OVERALL LENGTH

0.875 INCHES NOMINAL, END ITEM IDENTIFICATION ARSS, WRENCHING

SURFACE SIZE 0.313 INCHES NOMINAL SINGLE END, DRIVE SURFACE

SIZE 0.250 INCHES NOMINAL SINGLE END, FEATURES PROVIDED

MANUAL TOOL, WRENCHING SURFACE SHAPE 6 POINT SINGLE END

INTERNAL, DRIVE END SHAPE SQUARE SINGLE END INTERNAL,

MATERIAL STEEL OVERALL, SURFACE TREATMENT CHROMIUM OVERALL,

STYLE DESIGNATOR INTERNAL-INTERNAL. THIS IS A CONSUMABLE

ITEM, NONACCOUNTABLE ON HAND RECEIPT, ISSUED WITH THE TOOL

SET, QUANTITIES ON HAND ESTABLISHED BY OWNING UNIT.

Enlarge

5120-01-650-2765 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH, OVERALL LENGTH

0.875 INCHES NOMINAL, END ITEM IDENTIFICATION SECM, WRENCHING

SURFACE SIZE 0.344 INCHES NOMINAL SINGLE END, DRIVE SURFACE

SIZE 0.250 INCHES NOMINAL SINGLE END, FEATURES PROVIDED

MANUAL TOOL, WRENCHING SURFACE SHAPE 6 POINT SINGLE END

INTERNAL, DRIVE END SHAPE SQUARE SINGLE END INTERNAL,

MATERIAL STEEL OVERALL, SURFACE TREATMENT CHROMIUM OVERALL,

STYLE DESIGNATOR INTERNAL-INTERNAL. THIS IS A CONSUMABLE

ITEM, NONACCOUNTABLE ON HAND RECEIPT, ISSUED WITH THE TOOL

SET, QUANTITIES ON HAND ESTABLISHED BY OWNING UNIT.

Enlarge

5120-01-650-3051 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH, OVERALL LENGTH

0.875 INCHES NOMINAL, END ITEM IDENTIFICAT ON SECM, WRENCHING

SURFACE SIZE 0.375 INCHES NOMINAL SINGLE END, DRIVE SURFACE

SIZE 0.250 INCHES NOMINAL SINGLE END, FEATURES PROVIDED

MANUAL TOOL, WRENCHING SURFACE SHAPE 6 POINT SINGLE END

INTERNAL, DRIVE END SHAPE SQUARE SINGLE END INTERNAL,

MATERIAL STEEL OVERALL, SURFACE TREATMENT CHROMIUM OVERALL,

STYLE DESIGNATOR INTERNAL- INTERNAL. SOCKET,SOCKET WRENCH,

OVERALL LENGTH 0.875 INCHES NOMINAL, END ITEM IDENTIFICATION

ARSS, WRENCHING SURFACE SIZE 0.375 INCHES NOMINAL SINGLE END,

DRIVE SURFACE SIZE 0.250 INCHES NOMINAL SINGLE END, FEATURES

PROVIDED MANUAL TOOL, WRENCHING SURFACE SHAPE 6 POINT

SINGLE END INTERNAL, DRIVE END SHAPE SQUARE SINGLE END

INTERNAL, MATERIAL STEEL OVERALL, SURFACE TREATMENT

CHROMIUM OVERALL, STYLE DESIGNATOR INTERNAL- INTERNAL. THIS IS

A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND RECEIPT, ISSUED

WITH THE TOOL SET, QUANTITIES ON HAND ESTABLISHED BY OWNING

UNIT.

Enlarge

5120-01-650-3051 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH, OVERALL LENGTH

0.875 INCHES NOMINAL, END ITEM IDENTIFICAT THIS IS A

CONSUMABLE ITEM, NONACCOUNTABLE ON HAND RECEIPT, ISSUED

WITH THE TOOL SET, QUANTITIES ON HAND ESTABLISHED BY OWNING

UNIT.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UC

UC

UC

UC

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAC X

EAC X

EAC X

EAC X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5120-01-650-2759 SOCKET,SOCKET WRENCH SOCKET,SOCKET WRENCH, OVERALL LENGTH

0.875 INCHES NOMINAL, END ITEM IDENTIFICATION ARSS, WRENCHING

SURFACE SIZE 0.500 INCHES NOMINAL SINGLE END, DRIVE SURFACE

SIZE 0.250 INCHES NOMINAL SINGLE END, FEATURES PROVIDED

MANUAL TOOL, WRENCHING SURFACE SHAPE 6 POINT SINGLE END

INTERNAL, DRIVE END SHAPE SQUARE SINGLE END INTERNAL,

MATERIAL STEEL OVERALL, SURFACE TREATMENT CHROMIUM OVERALL,

STYLE DESIGNATOR INTERNAL-INTERNAL, SPECIFICATION/STANDARD

DATA 05047-ASME B107.1 PROFESSIONAL/INDUSTRIAL ASSOCIATION

STANDARD, NONDEFINITIVE SPEC/STD DATA 1 TYPE AND 1 CLASS. THIS

IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND RECEIPT, ISSUED

WITH THE TOOL SET, QUANTITIES ON HAND ESTABLISHED BY OWNING

UNIT.

Enlarge

5140-01-627-6737 PANEL,INSERT,TOOL BOX : SEE DRAWING 11A7000411; CONSISTS OF 1

EACH 1/8" THICK POLYETHYLENE HARD BACKER DWG. 11A7000213, 1

EACH 2.0" THICK FOAM DWG. 11A7000220 AND FOAM ADHESIVE DWG.

11A7000568.

Enlarge

5340-01-669-3242 CLEANING,GREASE,KIT : GREASE JOINT REJUVENATOR MASTER KIT,

PROFESSIONAL MODEL GREASE JOINT REJUVENATOR.( 7862-AS),

POCKET MODEL GREASE JOINT REJUVENATOR(R).( 7864-AS), 5. FLEX

HOSE ( 7884-7), EXTRA COUPLER ( GFC00001), BLOW-MOLDED CASE (

7862K-1)

Enlarge

4930-00-200-1841 COUPLING,GREASE GUN : SHAFER TYPE COUPLING FOR GREASE GUN;

CONNECTOR 1/8-27 NPTF INTERNAL DRYSEAL; SURFACE TREATMENT

CADMIUM OR ZINC PLATED; MAXIMUM 10,000 PSI.

Enlarge

4930-01-396-7788 LUBRICATING GUN,HAND : PISTOL GRIP, HAND OPERATED GREASE GUN;

3-WAY LOADING, STANDARD CARTRIDGE, SUCTION OR BULK FILL; AIR

BLEEDER TO RELEASE TRAPPED AIR; DEVELOPS UP TO 7,000 PSI;

MINIMUM 18 INCH FLEX HOSE WITH GREASE FITTING ADAPTER.

Enlarge

4710-01-668-4874 PIPE ASSEMBLY,METAL : 6 INCH RIGID HOSE FOR LU-MAX LUBRICATING

GUN LX-1152; 30 DEGREE ANGLE; 1/8 INCH NPT MALE FITTINGS ON

BOTH ENDS; ZINC PLATED CORROSION-RESISTANT FINISH.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UC

UB

UB

UB

UB

UB

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAC X

EAN D

EAN X

EAN X

EAN X

EAN X

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

5110-01-661-6702 DIE SET,METAL STAMPING,HAND : DIE, METAL STAMP, PERIOD, GOTHIC

STYLE, 1/8 INCH HIGH CHARACTER, HEAVY-DUTY; MUST FIT IN DIE SET

11A7000031.

Enlarge

03273-A:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER A, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "A", PART OF 1/8" METAL STAMP. CH

HANSON. THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND

RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

Enlarge

03273-B:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER B, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "B", PART OF 1/8" METAL STAMP. CH

HANSON. THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND

RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

Enlarge

03273-C:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER C, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "C", PART OF 1/8" METAL STAMP. CH

HANSON.

Enlarge

03273-D:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER D, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "D", PART OF 1/8" METAL STAMP. CH

HANSON. THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND

RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

Enlarge

03273-E:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER E, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "E", PART OF 1/8" METAL STAMP. CH

HANSON. THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND

RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

Enlarge

03273-F:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER F, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "F", PART OF 1/8" METAL STAMP. CH

HANSON. THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND

RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

CUI

04/01/2022Date of Last Review

From: SC 9999-01-SKO

4940-01-680-2383

UB

UC

UC

UC

UC

UC

UC

To

A C T

B

Quantity On Hand

Component Hand Receipts

UI

Line Item NumberCL Number:

Item Description E

Qty Aut

C

EAN X

EAC D

EAC D

EAC D

EAC D

EAC D

EAC D

EI Desc:

A

C I I C

HAND RECEIPTS REPORT WITH ILLUSTRATION

CUI

EI NSN:

I N D

PUB Date : A050774940-95-A72

A R C

National Stock Number

Enlarge

03273-G:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER G, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "G", PART OF 1/8" METAL STAMP. CH

HANSON THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND

RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

Enlarge

03273-H:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER H, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "H", PART OF 1/8" METAL STAMP. CH

HANSON. THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND

RECEIPT, ISSUED WITH THE TOOL SET, QUANTITIES ON HAND

ESTABLISHED BY OWNING UNIT.

Enlarge

03273-I:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER I, METAL, STAMP, HAND TYPE,

CHARACTER NUMERICAL "I", PART OF 1/8" METAL STAMP. CH HANSON.

THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND RECEIPT,

ISSUED WITH THE TOOL SET, QUANTITIES ON HAND ESTABLISHED BY

OWNING UNIT.

Enlarge

03273-J:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER J, METAL, STAMP, HAND TYPE,

CHARACTER NUMERICAL "J", PART OF 1/8" METAL STAMP. CH HANSON.

THIS IS A CONSUMABLE ITEM, NONACCOUNTABLE ON HAND RECEIPT,

ISSUED WITH THE TOOL SET, QUANTITIES ON HAND ESTABLISHED BY

OWNING UNIT.

Enlarge

03273-K:00NS2 STAMP, METAL. 1/8" HEIGHT, CHARACTER K, METAL, STAMP, HAND

TYPE, CHARACTER NUMERICAL "K", PART OF 1/8"…