ATTACH_05_2024-REQ-343_Break_out_pricing.pdf

Specification No. 2024-REQ-343 Page 1 Pricing Sheet

BREAK-OUT PRICING SHEET

2024-REQ-343

Unit 5 Spring 2025 Outage Contractor Services

The items below must be filled out clearly and completely. Please be sure to have read the Specification and any Addenda thoroughly, and to address any questions through OpenGov before the Bid due date. Failure to complete this form as instructed may result in Bidders being evaluated as non-responsive

A. Total of Fixed Price Items Total firm price for fixed-price items of bid Specification named Unit 5 Spring 2025 Outage Contractor Services as listed in Section 2.4 of the Specification/Bid: include cost of mobilization/de-mobilization and Public Construction Bond

Written Out ________________________________________________________ Dollars

B. Break-Out Pricing

B.1 Total cost of the Public Construction Bond as required for this Bid:

B.2 Total cost to complete Specification item 2.6, High-Pressure Desuperheater “B” Pipe/Liner Replacement

B.3 Total cost to complete Specification item 2.7, HRSG “Box 1” Floor Liner Replacement

Specification No. 2024-REQ-343 Page 2 Pricing Sheet

B.4 Total cost to complete Specification item 2.8, HRSG Expansion Joint Flow Liners

B.5 Total cost to complete Specification item 2.9, HRSG High-Pressure Drum Access Doors

B.6 Total cost to complete Specification item 2.10.A, HRSG Penetration Seals (Reheater)

B.7 Total cost to complete Specification item 2.10.B, HRSG Penetration Seals (HP Evaporator)

B.8 Total cost to Mobilize / Demobilize

Specification No. 2024-REQ-343 Page 3 Pricing Sheet

B.9 Provide a “per-item” cost to remove a twenty-four-inch (24") HRSG tube segment and replace with new OWNER supplied tube stock of SA-213-T91, 1.75"OD X 0.105"MWT, including all phases of heat treatment and R-1 Report required activities

B.10 Provide a “per-item” cost to remove a twenty-four-inch (24") HRSG tube segment and replace with new OWNER supplied tube stock of SA-213-T91, 1.75"OD X 0.125"MWT, including all phases of heat treatment and R-1 Report required activities

B.11 Provide a “per-item” cost to remove a twenty-four-inch (24") HRSG tube segment and replace with new OWNER supplied tube stock of SA-213-T22, 1.75"OD X 0.110"MWT, including all phases of heat treatment and R-1 Report required activities

Materials, rentals and sub-contracted services over and above the specified scope of work shall be billed at Cost plus _____________________________ percent (%), and substantiated with paid invoices

Specification No. 2024-REQ-343 Page 4 Pricing Sheet

C. References

Please list a minimum of three (3) projects completed by your company of equal or greater size, scope, cost, and complexity as the project specified in Specification 2024-REQ-343.

This list shall be prepared specifically for this Bid submittal and should include the name of the Entity the work was completed for, and the name and contact information of a responsible person qualified to respond to questions regarding the work performed, its quality, costs, schedule, etc.

Prior successful accomplishment of such work will be a consideration when evaluating Bidder’s qualifications

Entity Name Contact Person Telephone

Specification No. 2024-REQ-343 Page 5 Pricing Sheet

D. Additional Services

A. Rates for Classification of Labor: These rates will only be applied to T&M work as well as work outside of the written scope of this Specification. Work billed at the below rates must be approved in writing by OWNER prior to commencement

Classification / Job Title Straight Time Overtime

$ ____________ /hr $ ____________ /hr

Specification No. 2024-REQ-343 Page 6 Pricing Sheet

B. Please list all Subcontractors:

Company Name Address & Telephone Type of Craft / Service