Appendix 1 Shoreline Drive Camera Upgrade Cost Proposal sample.pdf

PDF 64 KB Posted

Attached to
Network Maintenance, Support, Installations and Parts
Solicitation number
TI-24-497
Issued by
California

About this file

This is a Scope of Work document for the Shoreline Drive Camera Upgrade Project issued by a City government. The project involves removing and upgrading all camera hardware at the Shoreline Drive and Shoreline Village Drive intersection, specifically at the southeast pole location. The contractor is responsible for providing labor and parts to install Cisco switches and Hanwha cameras connected to the City's fiber backbone. Key deliverables include removal of existing camera hardware from two poles, installation of a McCain expansion cabinet on the traffic signal cabinet, installation of a Hanwha PNM-C34404RQPZ camera with specified pole adapter and arm, installation of Cat 6 fiber optic cabling, procurement and installation of a Cisco C9200CX-8UXG-2X-A switch with SFP modules and patch cables, and procurement and installation of a Dell EMC PowerEdge XR11 server with Windows Server 2022 and RAID 5 storage configuration. The contractor must also provide traffic control, bucket trucks, all necessary permits, and comprehensive manufacturer and installation documentation including serial numbers, model numbers, IP addresses, MAC addresses, installation dates, and locations.

The City will handle all hardware and software configuration. The contractor is required to provide a dedicated 110-volt power outlet from the meter at the southeast corner to the expansion cabinet. Vendors who are Genetec-certified must provide separate quotes for one Genetec Camera License and one Genetec Camera Advantage module. No pricing terms, contract duration, award dates, or funding information is specified in this scope of work document, which serves as the basis for the contractor's cost proposal.

View the file

Other files

Show all 19

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Shoreline Drive Camera Upgrade Project

Configuration of all hardware and software will be performed by City staff.

Contractor is to provide labor and parts for this example project called Shoreline Drive and Shoreline Village Drive Camera Upgrade Project. The sample scope of work shall be included as part of your Cost Proposal.

1.1 The project is to remove and upgrade all hardware at the Shoreline Dr/Shoreline Village Dr intersection on the southeast pole. This location will be upgraded with Cisco switches and Hanwha cameras, and it will be connected to the City’s fiber backbone.

1.1.1 At the intersection of NW and SE intersection of Shoreline Dr/ Shoreline Village Dr the City will require that the vendor remove all camera hardware from the two poles including camera, power inside enclosure and Wi-Fi antenna.

1.2 The City will require an expansion Cabinet McCAIN BBS M64401 56X26X12 Caltrans-Natural-Best Lock to be installed on the side of the traffic signal cabinet located at the SE intersection of Shoreline Dr/Shoreline Village Dr. The vendor will bring in a dedicated 110 power outlet single gang from the meter located in the at the SE corner of Shoreline Dr/Shoreline Way to the inside of the expansion cabinet.

1.6 At the SE Traffic Pole of Shoreline Dr/Shoreline Village the City will require to purchase and install a Hanwha PNM-C34404RQPZ camera, strap a Hanwha SBP-300PMW1 pole adapter and install a Hanwha SBP- 390WMW2 arm.

1.7 Install one Cat 6 OSP CommSCOPE - CAT6 CS34P-10BLCK C6 4/23/UTP

RL1KFT from the camera to the cisco switch inside the expansion cabinet and terminated with RJ 45’s on both ends.

1.8 Inside the expansion cabinet you will purchase and install a 1-Cisco

C9200CX-8UXG-2X-A with Cisco GLC-LH-SMD SFP and two SM LC to LC patch cables.

1.9 Purchase and install one Dell EMC PowerEdge XR11 with windows server

2022 (standard), 3 x 4TB HDD (RAID 5) to be installed inside the expansion cabinet.

1.10 Vendor to provide traffic control as required.

1.11 Vendor to provide their own bucket trucks as needed.

1.12 Vendor to provide all manufacturer and installation documentation.

1.12.1 Documentation will include, serial numbers, model number, IP address, Mac Address, installation dates, and locations

1.13 Obtain all necessary permits required by the City.

1.14 For the Genetec vendors only, please provide a quote for

1.14.1 1 Genetec Camera License

1.14.2 1 Genetec Camera Advantage

File details come from the government source that posted it. Updated .