A06_Corner_Panel_Metal_Obtuse_Angle.pdf

This is a technical drawing specification for a steel corner panel component of a 4-strand barbed wire fence system. The document is issued by the United States Department of the Interior, Bureau of Land Management, Pecos District Operations Office in Roswell, New Mexico.

The drawing illustrates the fastening detail for obtuse corners and provides typical bolt hole placement specifications for corner installations. Key technical requirements include bolt hole placement at 18 inches and 12 inches from the top of the post, with the use of 0.5-inch diameter bolts secured with nuts and washers per IHW contract specifications. A bracket fabricated from stock is designed to accommodate obtuse angles along the fence route. The drawing was designed by R. Fox, reviewed by B. Crawford, and approved by R. Porter, dated January 2022. The document is identified as Sheet 2 of 2, Drawing Number 323116-(5a), with a scale noted as NTS (Not To Scale).