A06_Corner_Panel_Metal.pdf

This is a technical drawing specification for a steel corner panel with strand barbed wire fence design, prepared by the United States Department of the Interior, Bureau of Land Management, Pecos District Operations Office in Roswell, New Mexico. The drawing, dated January 2022 and designated as drawing number 323116-(5), provides detailed construction specifications for a 90-degree corner fence installation.

The design includes specific material and dimensional requirements: 16" x 16" x 16" concrete base components, vertical steel angles set in cylindrical concrete footings (minimum 39" deep and 10" diameter), brace anchor blocks approximately 16" x 16" x 16", and wire spacing configurations shown in the included diagram. The corner brackets are fabricated from steel angle material on flat stock per specified dimensions, with bolt hole placement detailed in the fastening detail. The drawing specifies that panel locations follow contract maps, panels measure 12-1/2" x 52-1/2" with 1/4" vertical angles, and brace member angles and lengths vary based on topography and site conditions. The document includes left and right elevation views, a top view of the typical 90-degree corner, a wire spacing diagram, and a typical fastening detail for the corner installation. Design approval authority is listed as R. Porter, with R. Fox as designer and B. Crawford as reviewer.