AMENDMENT 07.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1

1. CONTRACT ID CODE

I

PA

E OF PAGES

I 3

5. PROJECT NUMBER (If applicable)

7198749

CODE

3. EFFECTIVE DATE

05/12/2025

702050 CODE I

4. REQUISITION/PURCHASE REQUISITION

73002PR250000005

7. ADMINISTERED BY (If other than Item 6)

Same as BLOCK 6

2. AMENDMENT/MODIFICATION NUMBER

6. ISSUED BY

US Coast Guard

FDCC Seattle

915 2nd Ave, #2664

Seattle, WA 98174

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

70Z05025R43000002

9B. DATED (SEE ITEM 11)

NMACC 111, Unrestricted Pool 1, contract holders 03/06/2025

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE I FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

� The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. X is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor D is not X is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

RE: Task Order Announcement #70Z05025R43000002 for Design-Build SITKA WATERFRONT IMPROVEMENTS

The purpose of this Amendment is to distribute responses to Pre-Proposal Inquiries. See Continuation Sheets.

NMACC contract holders are reminded to acknowledge this amendment when submitting a Proposal Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

(Signature of parson authorized to sign) (Signature of Contracting Officer)

R

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

5/12/2025

Tracianne Torklep

70Z05025R43000002

SECTION SF 30 BLOCK 14 CONTINUATION

PAGE SUMMARY OF CHANGES

AMENDMENT 007

No enclosed documents.

A. GOVERNMENT RESPONSES TO PRE-PROPOSAL INQUIRIES (PPIs)

I. CHANGES TO SPECIFICATIONS AND APPENDICES

RFP SECTION 01800 1.7.3.3.5 WINDOW TREATMENTS

REMOVE: All exterior windows shall receive 1” wide horizontal blinds. Blinds shall feature a steel channel top rail, enclosed metal bottom rail, aluminum alloyed slats and braded slat support

“ladder”. Any steel features shall be treated for corrosion resistance. All blinds shall be capable of nominally 180-degree partial tilting operation and full-height rising. Controls: Horizontal slats shall be tilted by a transparent tilting wand, hung vertically by its own weight. The tilter control shall be fully enclosed and shall tilt slats to any desired angle and be designed to prevent over tightening. Provide lift cords to fully raise and fully lower the slats and enable the assembly to stop at any intermediate location. The lift cord shall incorporate a “crash-proof” feature that locks the blind automatically upon release of cord and to read "Controls: Provide motor-operated blinds with the ability to raise, lower, and tilt the blades via a motorized mechanism. Install wall controls that allow for individual operation of each blind.

INSERT: All exterior windows shall receive 1” wide horizontal blinds. Blinds shall feature a steel channel top rail, enclosed metal bottom rail, aluminum alloyed slats and braded slat support

“ladder”. Any steel features shall be treated for corrosion resistance. All blinds shall be capable of nominally 180-degree partial tilting operation and full-height rising. Controls: Provide motor-operated blinds with the ability to raise, lower, and tilt the blades via a motorized mechanism.

Install wall controls that allow for individual operation of each blind. The horizontal blind slat finish shall be enamel finished or natural anodized aluminum.

RFP SECTION 01800 1.1.1.1 Bid Option 2

REMOVE:

• Provide a hardened security fence around the expanded footprint with new sliding vehicle gate and pedestrian gate. Vehicle and pedestrian gate location may be adjusted to optimize site layout.

70Z05025R43000002

INSERT:

• Provide a hardened security fence around the entire footprint, including the original footprint and the expanded footprint. Provide a new sliding vehicle gate and pedestrian gate that matches the new hardened security fence. Vehicle and pedestrian gate location may be adjusted to optimize site layout.

II. THE FOLLOWING ANSWERS TO QUESTIONS/PRE-PROPOSAL INQUIRIES

ARE PROVIDED:

7. Drawing A1 shows eight (8) total Fixed clerestory windows for the PEMB. Drawing A2 shows the exterior doors also have windows for the PEMB. Specification 01800-1.7.3.3.5 indicates "All exterior windows shall receive 1" wide horizontal blinds." Please confirm Window

Treatments of any kind are NOT required for the PEMB windows shown on Drawings A1 & A2.

Answer: This answer is a revision to the answer made to PPI #7 in Amendment 004.

Provide window treatment at windows as specified in revised RFP Section 01800- 1.7.3.3.5 of this amendment. Clerestory windows require window treatment. Vision lights in doors do not require window treatment.

212. Amendment 6 adds the requirement of a bilge and oily waste (BOW) oil water separator per UFC 4-150-02 3-6. This UFC section states that the BOW system is “usually a fixed piping system” and further in section 3-6.4 it states that the piping requirements are “similar to the requirements for sewage systems”. However, it is not the SAME piping system as the sewage collection system. The UFC further reinforces this in 3-6.1 where it states “bilge wastes are normally the primary influent (both in volume and contaminant concentration) to an oily waste treatment system.” Oil water separators are not designed for raw septage to flow through them, it would clog the filter immediately. Typically, BOW is treated via an oil water separator before being combined with a sanitary sewer system. Amendment 6 RFP drawings show the BOW oil water separator on the sanitary sewer force main.

Please confirm that a separate BOW piping system is required per UFC 4-150-02 or if the requirement to treat BOW should be removed in whole.

Answer: Yes, a separate bilge and oily waste piping system is required. Follow requirements for bilge and oily waste per the UFC.