TSFS 2020 Anchor Chain Gauging.pdf

Condition Report #: 6933A220P000028-CR-006 Request Date:

Contract:

Work Package:

Description of Work Item:

Dwg/Spec:

Category: Category (A) Category (B) Category (C)

Affects on going work, schedule critical. Immediate action required.

Required for evaluation, not schedule critical. Routine action required.

No action required.

Information Only.

Recommendations/Materials and Man hours Required/Delays and Disruptions:

Submitted By/Title: Date:

Submitted To/Title: Elizabeth Grove / MARAD

Approved Signature*: Date:

*Signature only required for cost estimates

Answered By: Response Date:

Condition Found:

Response:

Rhoads Industries, Inc. is providing the attached anchor chain gauging report for your reference. E-mails also attached with ABS approval of report and approval to proceed with painting.

N/A

Vince Giannone / Project Manager 6/18/2020

Condition/RFI Report

6/18/2020

N/A

Item 211 - Anchor Chain & Lockers

Chain Gauging Report

6933A220P000028

6-18-2020 vgiannone Snapshot

Vessel: Date:

Location:

Shot # Inside Outside Average Inside Outside Average Inside Outside Average

1 1.344 1.256 1.300 1.308 1.170 1.239 1.325 1.160 1.243

2 1.308 1.155 1.232 1.255 1.170 1.213 1.325 1.276 1.301

3 1.320 1.275 1.298 1.310 1.195 1.253 1.300 1.240 1.270

4 1.284 1.220 1.252 1.304 1.184 1.244 1.334 1.285 1.310

Shot # Inside Outside Average Inside Outside Average Inside Outside Average

1 1.240 1.140 1.190 1.328 1.288 1.308 1.315 1.285 1.300

2 1.250 1.336 1.293 1.268 1.176 1.222 1.344 1.272 1.308

3 1.275 1.310 1.293 1.244 1.148 1.196 1.230 1.148 1.189

4 1.235 1.132 1.184 1.236 1.155 1.196 1.344 1.279 1.312

5 1.191 1.115 1.153 1.311 1.188 1.250 1.305 1.272 1.289

6 1.102 1.150 1.126 1.265 1.155 1.210 1.315 1.300 1.308

7 1.180 1.188 1.184 1.151 1.174 1.163 1.315 1.280 1.298

8 1.260 1.332 1.296 1.190 1.115 1.153 1.330 1.256 1.293

9 1.235 1.188 1.212

10 1.344 1.268 1.306

Notes:

TS Freedom Star Readings by: Kevin Casey 6/15/2020

There were many more master links on the STBD side chain relative to the Port side; therefore, more shots were taken for the Starboard chain links.

Philadelphia Navy Yard, Rhoads Dry Dock #2

Outboard Center Inboard

Anchor Chain Report - Port side

Anchor Chain Report - Starboard side

Outboard Center Inboard

Giannone, Vincent

From: Mark Caron <MCaron@eagle.org>

Sent: Tuesday, June 16, 2020 4:57 PM

To: Yarnell, Brian; Casey, Kevin

Cc: MARADFreedomStar

Subject: [EXTERNAL] Re: [EXTERNAL]: Re: MARAD TS Freedom Star

Please proceed.

Best regards, Mark Caron

Get Outlook for iOS

From: Yarnell, Brian <byarnell@rhoadsinc.com>

Sent: Tuesday, June 16, 2020 4:55:15 PM

To: Casey, Kevin <kcasey@rhoadsinc.com>

Cc: Mark Caron <MCaron@eagle.org>; MARADFreedomStar <MARADFreedomStar@rhoadsinc.com>

Subject: [EXTERNAL]: Re: MARAD TS Freedom Star

Mark the painters are looking for a go ahead on the chain and anchor. If these numbers are good enough to move forward let me know thanks.

Sent from my iPhone

On Jun 16, 2020, at 2:44 PM, Casey, Kevin <kcasey@rhoadsinc.com> wrote:

Hey Mark, See attached for the same spreadsheet submitted in the below e-mail, with highlights removed.

Thanks, KEVIN CASEY

Project Engineer Rhoads Industries, Inc.

215.435.7821 Mobile

From: Casey, Kevin

Sent: Tuesday, June 16, 2020 2:36 PM

To: 'MCaron@eagle.org' <MCaron@eagle.org>

Cc: MARADFreedomStar <MARADFreedomStar@rhoadsinc.com>

Subject: MARAD TS Freedom Star

Hey Mark, Please see attached for an updated Anchor Chain report for the TS Freedom Star; I was mistaken on 2 of the readings on the initial submission (I highlighted those in yellow on the attached to draw your attention to the new/correct readings). I also tried to adjust the spreadsheet to visually match reports you’ve seen in the past, using an example provided by Tim McGeein from MARAD for the Freedom

Star’s previous docking at Colonna’s Shipyard. Please let me know if you have any questions on this sheet and I will make any adjustments you’re looking for.

Thank you, KEVIN CASEY

Project Engineer

<image001.jpg>

Done Right with Rhoads™

Philadelphia Navy Yard, Building 57 1900 Kitty Hawk Avenue Philadelphia, PA 19112

215.435.7821 Mobile

kcasey@rhoadsinc.com | www.rhoadsinc.com vcard

CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed without the express written consent of Rhoads Industries, Inc. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same or by calling our main office at (267) 728-6300.

ITAR CONTROL STATEMENT: In the event this document (or any of the enclosures) contains technical data within the definition of the International Traffic in Arms Regulations or Export Administration Regulations, it is subject to the export control laws of the U.S. Government. Transfer of this data by any means to a foreign person, whether in the United States or abroad, without an export license or other approval from the U.S. Department of State or Commerce, is prohibited.

<Anchor Chain Dimensions - 6.16.2020.xlsx>