S06 Amendment 2_Q31 2020_11_23 Version 1_LBVA Mat and Fin Sched.pdf

VA Long Beach Healthcare System

Materials and Finishes Schedule Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

FLOOR CPT1 Carpet Tile Patcraft Custom Pattern #G0089 Custom sample/color #Q605Z 24in x 24in (5.66mm thickness)

Moisture Barrier Backing;

quarter-turn Conference rooms, offices

See *Note #1 at bottom of document; Use Shaw 5000 Carpet tile Adhesive; (use Shaw 4151 adhesive for high moisture areas); currently in use in hospital (referenece VA contract #SIN-61-304)

FLOOR CPT2 Carpet Tile Patcraft Custom Pattern #D2885 Custom sample/color #A8405 24in x 24in (5.66 mm thickness)

Moisture Barrier Backing;

quarter-turn large areas that require carpeting (waiting areas, lobbies)

See *Note #1 at bottom of document; Use Shaw 5000 Carpet tile Adhesive; (use Shaw 4151 adhesive for high moisture areas); currently in use in hospital

FLOOR LVT1 Luxury Vinyl Tile Armstrong Natural Creations Diamond 10 Technology Mystix

Color: Neva Lullaby/ Item #NA920

6in x 36in x 0.125 in (3.2 mm thickness)

Full spread adhesives/ glue down installation; default microbeveled edge;

Diamond 10 coating finish neutrals (corridors, waiting areas, lobbies)

See *Note #1 & #3 at bottom of document; (20mil wear layer); use Armstrong S-980 adhesive

FLOOR LVT2 Luxury Vinyl Tile Tarkett iD Latitude Wood Color: Chamois Oak #PLWD

6in x 48in x 0.120 in (3 mm thickness)

Full spread adhesives/ glue down installation; unbeveled edge neutrals (corridors, waiting areas, lobbies)

See *Note #1 & #3 at bottom of document; (20mil wear layer); use Tarkett RollSmart adhesive for typical applications; use Tarkett 975 adhesive for heavy-duty loads

FLOOR LVT3 Luxury Vinyl Tile Tarkett iD Latitude Wood Color: Scout PLWD #4694 6in x 48in x 0.120 in (3 mm thickness)

Full spread adhesives/ glue down installation; unbeveled edge neutrals (corridors, waiting areas, lobbies)

See *Note #1 & #3 at bottom of document; (20mil wear layer); use Tarkett RollSmart adhesive for typical applications; use Tarkett 975 adhesive for heavy-duty loads

ACCENT BROWN

FLOOR LVT4 Luxury Vinyl Tile Mannington Commercial Spacia - Abstract Mirus Hemp #SS5A6130

7.25in x 48in x 0.098in (2.5mm thickness)

Full spread adhesives/ glue down installation; unbeveled edge

Accent: Brown (in-patient/ clinical waiting areas, clinical offices, nurse stations, clinic hallways)

See *Note #1 & #3 at bottom of document; (20mil wear layer); use straight edge; use Mannington 373 adhesive

ACCENT PLUM

FLOOR LVT5 Luxury Vinyl Tile Shaw Contract

Vertical Layers- Unveil/ Style #0601V Color: Grit #01530

9in x 36in x 0.118in (3 mm thickness)

Direct Glue installation;

squared edge profile;

ExoGuard finish

Accent: plum (in-patient/ clinical waiting areas, clinical offices, nurse stations, clinic hallways)

See*Note #1 & #3 at bottom of document; (30mil wear layer); use Shaw 4151 adhesive

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

ACCENT GREEN

FLOOR LVT6 Luxury Vinyl Tile Shaw Contract

Vertical Layers- Unveil/ Style #0601V Color: Faded #01103

9in x 36in x 0.118in (3 mm thickness)

Direct Glue installation;

squared edge profile;

ExoGuard finish

Accent: Green (in-patient/ clinical waiting areas, clinical offices, nurse stations, clinic hallways)

See *Note #1 & #3 at bottom of document; (30mil wear layer); use Shaw 4151 adhesive

ACCENT BLUE

FLOOR LVT7 Luxury Vinyl Tile Mannington Commercial Amtico Signature- Abstract

Equator Wave/ Product Code

AR0AEQ39

18in x 36in x 0.098in (2.5mm thickness)

Full Spread adhesives installation; Unbeveled edge; Surface finish-ceramic;

Quantum Guard finish

Accent: Blue (in-patient/ clinical waiting areas, clinical offices, nurse stations, clinic hallways)

See *Note #1 & #3 at bottom of document; (40mil wear layer); apply Amtico RP-18 for slabs with Intact Vapor Barrier; may contribute to LEED points; use Mannington 373 adhesive

FLOOR RES-3a Resinous flooring- epoxy Stonhard Stonblend GSI Stone 3/16in. thickness

Poured installation; troweled mortar; flash/self-cap with Schluter Schiene between cove base and tile in-patient restroom flooring & lockers RES-3

FLOOR RES-3b Resinous flooring- epoxy Stonhard Stonblend GSI-G Wolf Gray 3/16in. thickness

Poured installation; troweled mortar; flash/self-cap with Schluter Schiene between cove base and tile public restroom flooring RES-3

FLOOR RES-3c Resinous flooring- epoxy Stonhard Stonblend GSI-G Luna 3/16in. thickness

Poured installation;

troweled mortar, 6in.

integral cove base with Stonhard 1/8in. metal cove strip labs RES-3

FLOOR RES-4a Resinous flooring- epoxy Stonhard Stonres RTZ Stonhenge 3/16in. thickness

Poured installation;

troweled mortar, 6in.

integral cove base with Stonhard 1/8in. metal cove strip operating rooms, sterile areas, emergency, patient rooms RES-4

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

FLOOR RES-4b Resinous flooring- epoxy Stonhard Stonres RTZ Riverbed 3/16in. thickness

Poured installation;

troweled mortar, 6in.

integral cove base with Stonhard 1/8in. metal cove strip operating rooms, sterile areas, emergency, patient rooms RES-4

BACK OF HOUSE

FLOOR RES-6Aa Resinous flooring- epoxy Stonhard Stonclad GS Desert Tan 1/4in. thickness

Poured installation; Stonkote GS4 finish; troweled mortar, 6in. integral cove base with Stonhard 1/8in. metal cove strip back of house; service areas; loading docks; maintenance areas RES-6a

FLOOR SD1 Static Dissipative Tile Armstrong Electro- Static Dissipative Excelon SDT Marble Beige #51950

12in x 12in x 0.125in (3.2mm thickness) full spread adhesives installation; use Armstrong recommended static dissipative tile adhesive MRI rooms; radiology

See *note #1 & #3 at bottom of document; used in 402 project;

(12mil wear layer); use with Armstrong S-202 adhesive

FLOOR TER1 Terrazzo, Poured Corradini Corp. N/A custom #8587-1 (white) 3/8in. epoxy terrazzo thin-set

Poured installation;

flash/self-cove using 6"zinc cap strip for the base and all divider strips neutrals (first floor corridors; first floor waiting areas; elevator lobbies on upper floors) currently in use in hospital

FLOOR TER2 Terrazzo, Poured Corradini Corp. N/A custom #5957-6 (gold) 3/8in. epoxy terrazzo thin-set

Poured installation;

flash/self-cove using 6"zinc cap strip for the base and all divider strips neutrals (first floor corridors; first floor waiting areas; elevator lobbies on upper floors) currently in use in hospital

FLOOR TER3 Terrazzo, Poured Corradini Corp. N/A custom #10767-2 (gray) 3/8in. epoxy terrazzo thin-set

Poured installation;

flash/self-cove using 6"zinc cap strip for the base and all divider strips neutrals (first floor corridors; first floor waiting areas; elevator lobbies on upper floors)

FLOOR TER4 Terrazzo, Poured Corradini Corp. N/A custom #10769-1 (multi-colored)

3/8in. epoxy terrazzo thin-set

Poured installation;

flash/self-cove using 6"zinc cap strip for the base and all divider strips neutrals (first floor corridors; first floor waiting areas; elevator lobbies on upper floors)

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

FLOOR TER5 Terrazzo, Poured Corradini Corp. N/A custom #11072-1 (brown) 3/8in. epoxy terrazzo thin-set

Poured installation;

flash/self-cove using 6"zinc cap strip for the base and all divider strips neutrals (first floor corridors; first floor waiting areas; elevator lobbies on upper floors)

FLOOR TER6 Terrazzo, Poured Corradini Corp. N/A custom #11121-1(Art Moderne green)

3/8in. epoxy terrazzo thin-set

Poured installation;

flash/self-cove using 6"zinc cap strip for the base and all divider strips bldg 7 & 8 (first floor corridors)

FLOOR WSF1

Welded Seam Sheet Flooring (Heat Welded with Rod) Mannington Commercial Paradigm II- Flow Exemplar (PD313)

6ft/ 9ft/ 12ft wide rolls (eliminate seams whenever possible) (2mm thickness)

Full spread adhesives/ glue down; Quantum Guard Elite finish; flash/self-cove and cap with Schluter Schiene Stainless steel neutrals (lobbies, corridors, patient rooms, exam rooms, procedure rooms, laboratories)

See *note #1 & #3 at bottom of document; (20mil wear layer);

heterogenous sheet vinyl; may contribute to LEED points; use 842383 weld rod; use Mannington V88 adhesive

FLOOR WSF2

Welded Seam Sheet Flooring (Heat Welded with Rod) Tarkett Acczent Flourish Inspire Essence 404

6.6ft wide x 75.5ft roll (2 mm thickness)

Full spread adhesives/ Glue down installation; flash/self-cove and cap with Schluter Schiene Stainless steel neutrals (lobbies, corridors, patient rooms, exam rooms, procedure rooms, laboratories)

See *note #1 & #3 at bottom of document; (31mil wear layer);

heterogeneous sheet vinyl; use Unicolored Grey 0284 weld rod; use Tarkett RollSmart adhesive for typical applications; use Tarkett 975 adhesive for heavy-duty loads under patient beds

FLOOR WSF3

Welded Seam Sheet Flooring (Heat Welded with Rod) Mannington Commercial Realities II

Wild Cherry/ Color: Ceylon 5650R

6ft/ 9ft/ 12ft wide rolls (eliminate seams whenever possible) (2mm thickness)

Full spread adhesives/ glue down; Quantum Guard Elite finish; flash/self-cove and cap with Schluter Schiene Stainless steel neutrals (lobbies, corridors, patient rooms, exam rooms, procedure rooms, laboratories)

See *note #1 & #3 at bottom of document; (20mil wear layer);

heterogenous sheet vinyl; may contribute to LEED points; use 842496 weld rod; use Mannington V88 adhesive

ACCENT BROWN

FLOOR WSF4

Welded Seam Sheet Flooring (Heat Welded with Rod) Lonseal Loneco Linen Topseal Oatmeal EL331

6ft wide x 60ft roll (2.0mm thickness)

Full spread adhesives/ glue down installation; Topseal urethane finish included;

flash/self-cove and cap with Schluter Schiene Stainless steel

Accent: Brown (in-patient/ clinical:

lobbies, corridors, patient rooms, exam rooms, procedure rooms, laboratories)

See *note #1 & #3 at bottom of document; (20mil wear layer);

heterogeneous sheet vinyl; may contribute to LEED points; use matching heat weld #EL331 thread/ LP 331; use Lonseal 813 pressure sensitive adhesive typical for all areas; use Lonseal 650 adhesive for under patient beds

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

ACCENT PLUM

FLOOR WSF5

Welded Seam Sheet Flooring (Heat Welded with Rod) Tarkett Acczent Flourish Prosper Serenade 305

6.6ft wide x 75.5ft roll (2 mm thickness)

Full spread adhesives/ Glue down installation; flash/self-cove and cap with Schluter Schiene Stainless steel

Accent: plum (in-patient/ clinical:

lobbies, corridors, patient rooms, exam rooms, procedure rooms, laboratories)

See *note #1 &#3 at bottom of document; (31mil wear layer);

heterogeneous sheet vinyl; use 0457 unicoloured grey weld rod; use Tarkett RollSmart adhesive for typical applications; use Tarkett 975 adhesive for heavy-duty loads

ACCENT GREEN

FLOOR WSF6

Welded Seam Sheet Flooring (Heat Welded with Rod) Shaw Contract

Collection: Collective Time/ Style: Constant Sheet 05127 Mist 12327

6.5ft x 68.5ft roll (eliminate seams whenever possible) (2.2mm thickness)

Full spread adhesives/ glue down; reverse installation;

Exoguard+ finish; flash/self-cove and cap with Schluter Schiene Stainless steel

Accent: Green (in-patient/ clinical:

lobbies, corridors, patient rooms, exam rooms, procedure rooms, laboratories)

See *note #1 #3 at bottom of document; (20mil wear layer);

heterogenous sheet vinyl; may contribute to LEED points; use 302VS weld rod/color: 12327; use Shaw 4151 adhesive

ACCENT BLUE

FLOOR WSF7

Welded Seam Sheet Flooring (Heat Welded with Rod) Mannington Commercial Paradigm II- Intersect Vanguard (PD119)

6ft/ 9ft/ 12ft wide rolls (eliminate seams whenever possible) (2mm thickness)

Full spread adhesives/ glue down installation; Topseal urethane finish included;

flash/self-cove and cap with Schluter Schiene Stainless steel

Accent: Blue (in-patient/ clinical:

lobbies, corridors, patient rooms, exam rooms, procedure rooms, laboratories)

See *note #1 & #3 at bottom of document; (20mil wear layer);

heterogenous sheet vinyl; may contribute to LEED points; use 842332 weld rod; use Mannington V88 adhesive

BACK OF HOUSE

FLOOR WSF8

Welded Seam Sheet Flooring (Heat Welded with Rod) Johnsonite | Tarkett iQ Optima

Optima Egyptian Scrolls #3242 0246

6.6ft wide x 82ft roll (2 mm thickness)

Full spread adhesives/ Glue down installation; flash/self-cove using 6" cap with Schluter Schiene Stainless steel neutrals (back of house-clean linen, clean utility, soiled utility)

See *note #1 & #3 at bottom of document; (31mil wear layer);

homogeneous sheet vinyl; use 0319 unicolored light beige weld rod; use Tarkett RollSmart adhesive for typical applications; use Tarkett 975 adhesive for heavy-duty loads under patient beds

BACK OF HOUSE

FLOOR WSF9

Welded Seam Sheet Flooring (Heat Welded with Rod) Johnsonite | Tarkett iQ Optima

Optima Praire Dancing #3242

6.6ft wide x 82ft roll (2 mm thickness)

Full spread adhesives/ Glue down installation; flash/self-cove using 6" cap with Schluter Schiene Stainless steel neutrals (back of house-clean linen, clean utility, soiled utility)

See *note #1 & #3 at bottom of document; (31mil wear layer);

homogeneous sheet vinyl; use 0290 multicolor middle beige weld rod;

use Tarkett RollSmart adhesive for typical applications; use Tarkett 975 adhesive for heavy-duty loads under patient beds

BACK OF HOUSE

FLOOR WSF10

Welded Seam Sheet Flooring (Heat Welded with Rod) Mannington Commercial BioSpec Choices- BioSpec MD Linen #15420

6.6 ft wide roll (2.0 mm thickness)

Full spread adhesives/ glue down installation; Quantum Guard Elite finish; flash/self-cove using 9" cap with Schluter Schiene Stainless steel neutrals (back of house-clean linen, clean utility, soiled utility)

See *note #1 & #3 at bottom of document; (31mil wear layer);

homogeneous sheet vinyl ; use 842322 weld rod; use Mannington V88 adhesive

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

FLOOR TX1 Flooring Transition Schluter VinProU ACGB Brushed Chrome Anodized Aluminum

Height as required to coordinate with floor selection and setting system selected.

ACGB Brushed Chrome Anodized Aluminum finish different height transitions (sheet vinyl to LVT; carpet to LVT) transitions at doors to be located at centerline of the closed door

FLOOR TX2 Flooring Transition Schluter VinProS ACGB Brushed Chrome Anodized Aluminum

Height as required to coordinate with floor selection and setting system selected.

ACGB Brushed Chrome Anodized Aluminum finish same height transitions transitions at doors to be located at centerline of the closed door

BASE WB1

Thermoplastic Rubber Wall Base Burke (Mannington) Type TP 1/8" Ginger #503

0.125in thick x 6in tall (order in 4ft pieces per carton; also available 100ft rolls)

Cove with Toe, Inside & Outside Corners use with carpet flooring

Use with Mannington MR-101 Acrylic Cove Base Adhesive

BASE WB2 Vinyl Wall Base Tarkett Reveal MW-XX-F6 Steel #179

0.25 in thick x 6in tall (8ft lengths) use with LVT flooring used in 402 project; use with Tarkett 960 base adhesive

WALL P1 Paint Sherwin Williams Emerald Low VOC, acrylic latex

Custom Manual Match 'VA Medical ICI 645' Water Chestnut Satin Neutrals (Primary Field Color) currently in use in hospital

WALL P2 Paint Sherwin Williams Emerald Low VOC, acrylic latex

Custom Manual Match 'VA Medical ICI 645' Water Chestnut Semi-gloss

Neutrals (metal doors and frames, wet areas, restrooms and service areas currently in use in hospital

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

WALL P3 Paint Sherwin Williams Emerald Low VOC, acrylic latex Pavestone SW7642 Satin Neutrals (Primary Field Color)

WALL P4 Paint Sherwin Williams Emerald Low VOC, acrylic latex Virtual Taupe SW7039 Satin Neutrals (Primary Field Color)

WALL P5 Paint Sherwin Williams Emerald Low VOC, acrylic latex Honied White SW7106 Satin Neutrals (Primary Field Color)

ACCENT BROWN

WALL P6 Paint Sherwin Williams Emerald Low VOC, acrylic latex Meadowlark SW7522 Satin Accent: Brown (in-patient/ clinical)

ACCENT BROWN

WALL P7 Paint Sherwin Williams Emerald Low VOC, acrylic latex Cobble Brown SW6082 Satin Accent: Brown (in-patient/ clinical)

ACCENT PLUM

WALL P8 Paint Sherwin Williams Emerald Low VOC, acrylic latex Truly Taupe SW6038 Satin Accent: plum (in-patient/ clinical)

ACCENT PLUM

WALL P9 Paint Sherwin Williams Emerald Low VOC, acrylic latex Chinchilla SW6011 Satin Accent: plum (in-patient/ clinical)

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

ACCENT GREEN

WALL P10 Paint Sherwin Williams Emerald Low VOC, acrylic latex Svelte Sage SW 6164 Satin Accent: Green (in-patient/ clinical) currently in use in hospital

ACCENT GREEN

WALL P11 Paint Sherwin Williams Emerald Low VOC, acrylic latex

Custom Manual Match 'VA Medical Louisburg Green' Satin Accent: Green (in-patient/ clinical) currently in use in hospital

ACCENT BLUE

WALL P12 Paint Sherwin Williams Emerald Low VOC, acrylic latex Poolhouse SW7603 Satin Accent: Blue (in-patient/ clinical)

ACCENT BLUE

WALL P13 Paint Sherwin Williams Emerald Low VOC, acrylic latex Needlepoint Navy SW0032 Satin Accent: Blue (in-patient/ clinical)

WALL PT1 Porcelain Tile Crossville Retro Active 2.0 Roasted Chestnut UPS #RET

4in x 12in (nominal) (5/16in thickness)

Matte/ Unpolished Finish (see designer sketch for layout); cap with Schluter Schiene transition between cove base and tile; outside corners of porcelain tile to be Schluter Rondec stainless steel; include coordinating Schluter Rondec accessories;

inside corners to be Schluter Dilex-EKE Classic Gray public restroom walls accent

See *note #2 at bottom of document;

use with Misty Gray H144 Hydroment grout; min. 3/16in. grout joint; refer to attached details for installation

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

WALL PT2 Porcelain Tile Crossville Retro Active 2.0 Seal Taupe UPS #RET 02 4in x 12in (nominal) (5/16in thickness)

Matte/ Unpolished Finish (see designer sketch for layout); cap with Schluter Schiene transition between cove base and tile; outside corners of porcelain tile to be Schluter Rondec stainless steel; include coordinating Schluter Rondec accessories;

inside corners to be Schluter Dilex-EKE Classic Gray public & patient restroom walls accent

See *note #2 at bottom of document;

use with Misty Gray H144 Hydroment grout; min. 3/16in. grout joint; refer to attached details for installation

WALL PT3 Porcelain Tile Crossville Java Joint Two Sugars UPS #JAV01 12in x 24in (nominal) (3/8in thickness)

Matte/ Unpolished Finish (see designer sketch for layout); cap with Schluter Schiene transition between cove base and tile; outside corners of porcelain tile to be Schluter Rondec stainless steel; include coordinating Schluter Rondec accessories;

inside corners to be Schluter Dilex-EKE Classic Gray public & patient restroom walls

See *note #2 at bottom of document;

use with Misty Gray H144 Hydroment grout; min. 3/16in. grout joint; refer to attached details for installation

WALL RES-W1 Resinous walls- epoxy Stonhard Stonglaze VSR Bone 0.0125in. Thickness

Poured installation;

immediately after mixing, apply with a high quality medium nap roller or an airless sprayer sterile areas, operating rooms RES-W1 (10-12Mil wear layer)

WALL RP1 Decorative Resin Panels 3Form Varia Ecoresin/ Style: Coconut Husk White Color: Coastline 3/8in. thickness Sandstone Neutrals (wayfinding and Decorative)

Designer may use any material found within this pattern

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

ACCENT BROWN

WALL RP2 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Coconut Husk White Color: Coastline 3/8in. thickness Sandstone

Accent: Brown (wayfinding and Decorative)

Designer may use any material found within this pattern

ACCENT BROWN

WALL RP3 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Swim + Elephant N50 + Elephant N50 (back)

Color: N 50 (SO-518545.2) 3/8in. thickness Sandstone & Swim Emboss

Accent: Brown (wayfinding and Decorative)

Designer may use any material found within this pattern

ACCENT PLUM

WALL RP4 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Concord N35 + Coconut Husk White + Concord N35

Color: Concord N35 (SO-518547.5) 3/8in. thickness Sandstone

Accent: plum (wayfinding and Decorative)

Designer may use any material found within this pattern

ACCENT PLUM

WALL RP5 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Swim + Concord N35 (back)

Color: Concord (SO-518545.4) 3/8in. thickness Sandstone & Swim Emboss

Accent: plum (wayfinding and Decorative)

Designer may use any material found within this pattern

ACCENT GREEN

WALL RP6 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Pear G18 + Coconut Husk White + Pear G18

Color: Pear G18 (SO-518547.6) 3/8in. thickness Sandstone

Accent: Green (wayfinding and Decorative)

Designer may use any material found within this pattern

ACCENT GREEN

WALL RP7 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Swim + Pear G18 (back)

Color: Pear G18 (SO-518545.3) 3/8in. thickness Sandstone & Swim Emboss

Accent: Green (wayfinding and Decorative)

Designer may use any material found within this pattern

ACCENT BLUE

WALL RP8 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Coconut Husk white Polar Sky

Color: Polar Sky (LID-1003436) 3/8in. thickness Sandstone

Accent: Blue (wayfinding and Decorative)

Designer may use any material found within this pattern

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

ACCENT BLUE

WALL RP9 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Swim + Bay B51 (back)

Color: Bay B51 (SO-518545.5) 3/8in. thickness Sandstone & Swim Emboss

Accent: Blue (wayfinding and Decorative)

Designer may use any material found within this pattern

WALL RP10 Decorative Resin Panels 3Form

Varia Ecoresin/ Style: Custom Digital Print (Calypso Gradient, Iv) + Powder D03

SO-518325.1/

LID-1009466 3/8in. thickness Vellum Restroom light box

Designer may use any material found within this pattern

WALL WP1 Wall Protection P3 Tec In-Grained Dogwood/ Item #P3T-60157

Width: trim to 48in./ 15yd roll/ thickness:

0.037in. reverse hang, random match neutrals (all major corridors & brown accent in-patient) use Light Mocha CG134 top cap & corner guards; use 1.5inch wide corner guards

ACCENT BROWN

WALL WP2 Wall Protection Koroseal Vector Resolution V121-54 width: 54in roll vertical application; butt-seam panels together Accent: Brown (in-patient/ clinical) use with laminated backing (Traffic Patterns 0.060 in thick)

ACCENT BROWN

WALL WP3 Wall Protection CS Acrovyn

Acrovyn 4000/ Collection:

Chameleon Sable Elm #1350 thickness: 0.060in

Suede Texture; use Sable Elm trim to hide seam Accent: Brown (in-patient/ clinical) use coordinating cap, end, corner and trim pieces to match crashrails

ACCENT PLUM

WALL WP4 Wall Protection Koroseal Vector Spectrum V121-69 width: 54in roll vertical application; butt-seam panels together Accent: plum (in-patient/ clinical) use with laminated backing (Traffic Patterns 0.060 in thick)

ACCENT PLUM

WALL WP5 Wall Protection P3 Tec Raffia Weave Floss/ Item #P3T-60058

Width: trim to 48in./ 15yd roll/ thickness:

0.035in. reverse hang, random match Accent: plum (in-patient/ clinical) use Light Mocha CG134 top cap & corner guards; use 1.5inch wide corner guards

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

ACCENT GREEN

WALL WP6 Wall Protection Koroseal Vector Gateway V121-86 width: 54in roll vertical application; butt-seam panels together Accent: Green (in-patient/ clinical) use with laminated backing (Traffic Patterns 0.060 in thick)

ACCENT GREEN

WALL WP7 Wall Protection CS Acrovyn

Acrovyn 4000/ Collection:

Chameleon Smokey Elm #1351 thickness: 0.060in

Suede Texture; use Smokey Elm trim to hide seam Accent: Green (in-patient/ clinical) use coordinating cap, end, corner and trim pieces to match crashrails

ACCENT BLUE

WALL WP8 Wall Protection Koroseal Vector Flash Drive V121-80 width: 54in roll vertical application; butt-seam panels together Accent: Blue (in-patient/ clinical) use with laminated backing (Traffic Patterns 0.060 in thick)

ACCENT BLUE

WALL WP9 Wall Protection CS Acrovyn

Acrovyn by Designs/ Collection:

Tapestry

Thatched/ Color: Eve of Indigo thickness: 0.040in use Eve of Indigo trim; thin trim with adhesive installation; wrapped square edge Accent: Blue (in-patient/ clinical) use coordinating cap, end, corner and trim pieces to match crashrails

BACK OF HOUSE

WALL WP10 Wall Protection K&H Metals and Supply Aluminum Diamond Tread Plate Aluminum

48in x 192in x 0.0125in thickness 48in. above finished floor

Back of house; industrial corridors only use coordinating full height corner guards; use with Acrovyn Irish Cream #997 wall panel above

SURFACES PL1

High Pressure Plastic Laminate Wilsonart

Monticello Maple 7925-38

0.028in - 0.039in.

thickness Matte Finish Installed Casework, wall panels currently in use in hospital (for reference only); use coordinating Wilsonart edge banding to match laminate color selected

SURFACES PL2

High Pressure Plastic Laminate Wilsonart

Kensington Maple 10776-60

0.028in - 0.039in.

thickness Matte Finish neutrals (Installed Casework/ bookshelves/combo, pedestals, nesting tables, tabletops, overheads, end panels, laterals, metal supports, modesty panels) currently in use in hospital; use coordinating Wilsonart edge banding to match laminate color selected

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

SURFACES PL3

High Pressure Plastic Laminate Formica Earthen Warp 5880-58 Matte Finish neutrals (Installed Casework/ bookshelves/combo, pedestals, nesting tables, tabletops, overheads, end panels, laterals, metal supports, modesty panels) use coordinating Formica edge banding to match laminate color selected; (optional coordinated edgband: Dollken woodtape 3mm #6455); use CalPanel EverStrong E210 ZERO adhesive

SURFACES PL4

High Pressure Plastic Laminate Arborite

Coppered Artisan Walnut W2003 AW (Artisan Wood finish) neutrals (Installed Casework/ bookshelves/combo, pedestals, nesting tables, tabletops, overheads, end panels, laterals, metal supports, modesty panels) use coordinated edgeband: Dollken woodtape 3mm #5949)

ACCENT BROWN

SURFACES PL5

High Pressure Plastic Laminate Formica Beluga Beige 3698-58 Matte Finish

Accent: Brown (in-patient/ clinical)-installed casework use coordinating Formica edge banding to match laminate color selected; use CalPanel EverStrong E210 ZERO adhesive

ACCENT PLUM

SURFACES PL6

High Pressure Plastic Laminate Arborite

Silvered Crossfire Pear W456EV EV (Evergrain finish)

Accent: plum (in-patient/ clinical)-installed casework use coordinated edgeband: Dollken woodtape 3mm #8342Y

ACCENT GREEN

SURFACES PL7

High Pressure Plastic Laminate Arborite Chambray Vert P404CA CA (Cashmere finish)

Accent: Green (in-patient/ clinical)-installed casework use coordinated edgeband: Rehau C700075 woodtape 3mm

ACCENT BLUE

SURFACES PL8

High Pressure Plastic Laminate Arborite Blue Denim P413RM RM (Refined Matte finish)

Accent: Blue (in-patient/ clinical)-installed casework use coordinated edgeband: WilsonArt D321 woodtape 3mm

SURFACES S1 Acrylic Solid Surface Corian Linen 1/2in thickness neutrals (countertops and transaction tops)

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

ACCENT BROWN

SURFACES S2 Acrylic Solid Surface Corian Cocoa Brown 1/2in thickness

Accent: Brown (countertops and transaction tops)

ACCENT PLUM

SURFACES S3 Acrylic Solid Surface Corian Cocoa Brown 1/2in thickness

Accent: Plum (countertops and transaction tops)

ACCENT GREEN

SURFACES S4 Acrylic Solid Surface Corian Rosemary 1/2in thickness

Accent: Green (countertops and transaction tops)

ACCENT BLUE

SURFACES S5 Quartz Cambria Jewel Parys 2cm (3/4in) thickness

Accent: Blue (countertops and transaction tops)

SURFACES S6 Acrylic Solid Surface Avonite Surfaces Wet Wall 6MM Panel System Kokoura 9117 1/4in thickness (6mm thickness) Satin finish all shower walls

SURFACES S7 Acrylic Solid Surface Meganite Verano White M040 1/2in thickness all patient restroom countertops; all secondary public restroom non-sink countertops

SURFACES S8 Acrylic Solid Surface Sophstone PreFab Cotton 2020 all public restroom countertops with integral sinks

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

CEILINGS ACT1 Acoustical Ceiling Tiles USG Mars High NRC Ceiling Panels/ Item #89600 White #050

24in x 48in x 7/8in thick

Shadowline Tapered (SLT) edge typical for all areas currently in use in hospital; Ceiling Grid: Preclude XL 15/16" Exposed Tee (White); Angle Molding: #7800 hemmed with prefinished white exposed flanges 7/8in x 7/8in; use with Armstrong BERC2 seismic clips

CEILINGS ACT2 Acoustical Ceiling Tiles Armstrong Mesa Second Look White 24in x 48in x 3/4in thick Angled Tegular 15/16 all major corridors

Ceiling Grid: Preclude XL 15/16" Exposed Tee (White); Angle Molding:

#7800 hemmed with prefinished white exposed flanges 7/8in x 7/8in;

use with Armstrong BERC2 seismic clips

CEILINGS ACT3 Acoustical Ceiling Tiles Armstrong Clean Room VL Unperforated 870B White

24in x 48in x 5/8in thick Square lay-in (bldg 164-pharmacy)

Ceiling Grid: Preclude XL 15/16" Exposed Tee (White); Angle Molding:

#7800 hemmed with prefinished white exposed flanges 7/8in x 7/8in;

use with Armstrong BERC2 seismic clips

MISC. CCT Cubicle Curtain Track Nelson Cubicle Track 1200CT/ (for suspended: 1100 CT) satin anodized

1 7/16in w x 15/16in high

84in AFF; satin anodized finish

All patient care areas needing privacy curtains Roller #12; extruded aluminum

MISC. CCT Cubicle Curtain Phoenix Textiles Contour Energy pending designer approval pending designer approval

MISC. DR1 Interior Doors CS Acrovyn Flush door

Classic Maple #372/ Painted door frames to be Water Chestnut P2

Per architectural door schedule

Public (Front of house) interior doors with high traffic continuous aluminum privacy hinge;

office doors do NOT have closers (unless required by fire code);

beveled door edge; door slab and door edge Classic Maple #372; Lite Kit

- Standard Metal (NR 90min);

replaceable edge covers; door trim to be Water Chestnut paint P2

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

MISC. DR2 Interior Doors Masonite Aspiro Red Oak/ Stain color: clear Per architectural door schedule typical all doors

Plain Sliced; door trim to be Water Chestnut paint P2

MISC. DR3 Interior Doors VT Industries add stain to match existing add stain to match existing pending designer approval Per architectural door schedule add stain to match existing to match adjacent doors

MISC. HR1 Handrail CS Acrovyn Acrovyn 4000/ HRB-10CN Handrail

Classic Maple #372 handrail with Brushed nickel #378 reveal 6.25in height

Suede Texture at 34in. AFF with WP1 & WP3

All Major Corridors (Back of House and Front of House) and Inpatient Units use coordinating cap, end, corner and trim pieces to match handrails; refer to attached details for installation

MISC. CR1 Crash Rail CS Acrovyn Acrovyn 4000/ SCR-64MN Crashrail Irish Cream #997 8in height use with WP2

All Major Corridor crash rails (Back of House and Front of House) and Inpatient Units; back of house wall protection panel use coordinating cap, end, corner and trim pieces to match crashrails; refer to attached details for installation

MISC. CG Corner Guard CS Acrovyn CO-8 Corner guard Stainless Steel/ #304 Alloy 3 1/2in leg.; 8ft height #4 Satin Finish; surface-mount All 90 degree corners use coordinating cap, end, corner and trim pieces to match corner guard;

refer to attached details for installation

MISC. LK1 Lockers OFS-Carolina Mile Marker use with WilsonArt Kensington Maple finish PL2

15in. wide x 18in.

depth x 84in high 2-tier all locations with lockers (dry areas) sloped top; standard padlocks;

finished bases; locker tag-aluminum;

double hook; revolving treble hook

MISC. RS1 Roller Shades Draper SunBloc SB 9000 series/ color:

SB9040 Grey (Opaque)

Per architectural window schedule inside or outside mount per window condition

Patient rooms and/or as requested by users

0% open; annodized metal fascia;

stainless steel chain handle with child safety attachment; reverse roll

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES

MISC. RS2 Roller Shades Mermet T Screen 1% with Koolblack White/Grey 009701 002131 0.024in thickness inside or outside mount per window condition typical all windows

1% open; annodized metal fascia;

stainless steel chain handle with child safety attachment; reverse roll

MISC. SCR Shower Curtain Rod Barrier Free Lifts

Curtain Track Rail Support System (CTRSS) Shower Rod System white 72in AFF

All patient care areas needing shower curtains TBD

MISC. SC Shower Curtain Hookless Shower Curtains for Healthcare Hookless Flex-on rings Mystery Beige 100% Polyester All showers TBD

MISC. TP1

Toilet Partition & Urinal Screens Wilsonart Solicor Compact/ Type 597 Light Oak Ply 8202-60 1/2in. thickness Matte finish all restrooms with multiple fixtures use 1/2in double-faced board between stalls; use Type 598- 3/4in double-faced board at stiles; refer to EMS standards for built-in shelves and other bathroom fixtures

MISC. TP2

Toilet Partition & Urinal Screens Wilsonart Solicor Compact/ Type 597 Silver Oak Ply 8203-60 1/2in. thickness Matte finish all restrooms with multiple fixtures use 1/2in double-faced board between stalls; use Type 598- 3/4in double-faced board at stiles; refer to EMS standards for built-in shelves and other bathroom fixtures

MISC. HW1 Headwall System Modular Services Company varies dependent upon accent color scheme selected dependent upon accent color scheme selected varies dependent upon accent color scheme selected all inpatient rooms; emergency rooms; med/surge; ICU

Version 1- Nov. 2020

The materials and finishes listed in this schedule are the standards for the Long Beach VA. Any deviation from the standard materials and finishes must be preapproved by the Long Beach VA Interior Designer.

CATEGORY CODE MATERIAL MANUFACTURER COLLECTION/STYLE COLOR COLOR IMAGE SIZE INSTALLATION / FINISH TYPICAL LOCATION OF USE NOTES *Notes:

1. Moisture testing to be completed for flooring materials, installation adhesives per manufacturers' directions

2. Product must be sealed per manufacturer's directions

3. Interior Design dept to determine pattern at time of specification

All materials