36C25819B0025-0002008.pdf

Howard Roofing Company Approved as Sika Sarnafil Elite Roofing Contractor

Pomona, CA – January 2015 – Sika Sarnafil has approved Howard Roofing Company as an Elite level roofing contractor for installation of Sika Sarnafil roofing systems. The company is among a selected group of roofing contractors recognized for their commitment to high quality roofing installations.

Every Sika Sarnafil approved contractor goes through a rigorous training and evaluation program to assure that they meet Sika Sarnafil’s high standards. In addition, each contractor is evaluated and rated annually on a variety of technical and business criteria and classified into one of three categories – Elite, Alliance and General – with Elite being the highest level of achievement.

“We are pleased to recognize Howard Roofing Company as a Sika Sarnafil Elite Roofing contractor,” said Brian Whelan, senior vice president of Sika Sarnafil. “Elite level roofing contractors are the best in the business, having demonstrated an unparalleled commitment to quality and the roofing industry.”

For information on the roofing services of Howard Roofing Company, call 909-622- 5598.

Sika Sarnafil has more than 50 years of experience in providing thermoplastic, single ply membranes for a wide range of roofing and plaza deck waterproofing applications. The company is known for its high quality, long lasting membranes and systems that help building owners achieve a sustainable roofing solution. Sika Sarnafil is a division of Sika Corporation. Visit the Sika Sarnafil website at usa.sarnafil.sika.com.

Sika Sarnafil Roofing System Submittal Package

Project Name: VA Loma Cancer Center Building

Project Address: 11201 Benton Street, Loma Linda CA 92357

Sarnafil Approved Roofing Contractor: Howard Roofing Co., Inc.

Janeille Typewritten Text Part 2 Products

Janeille Typewritten Text

Janeille Typewritten Text

Janeille Typewritten Text

D2User Typewritten Text Section 07 54 00

D2User Typewritten Text

D2User Typewritten Text

Part 2

Products

Janeille Typewritten Text

Part 2 – Products

PART 2 PRODUCTS

1. PVC Roofing Membrane Sarnafil G410 Energy Smart Roof Membrane. Color: White, Thickness: 60 mil

2. Flashing Materials

Sarnafil G410 Flashing membrane. Color: White. Thickness: 60 mil

G459 flashing membrane

Sarnaclad – PVC clad metal

Sarnareglet – Counterflashing

Sarnastack

Sarnacorners - Inside

Sarnacorners – Outside

3. Insulation/Protection Board

Sarnatherm Tapered Insulation - Average R-30

Dens-Deck Prime

4. Attachment Components

Sarnacol 2121 Adhesive - Membrane adhesive

Sarnacol 2163 - Board Adhesive

Stabond U-148 – Flashing adhesive

Sarnaplate

Sarnastop

5. Walkway Protection

Sarnatred V – Walkway Tread

Product Data Sheet Edition: 02/2013 Version no.: 0003

Sarnafil® G410 EnergySmart Roof® Membrane

Overview: The G410 EnergySmart Roof membrane is a heat-weldable membrane produced with an integral fiberglass mat reinforcement for excellent dimen-sional stability, for use in a Sika Sarnafil Adhered System.

Sika Sarnafil’s Energy Star qualified EnergySmart Roof color family con-sists of White, Tan, Light Gray, and Patina Green.

Composition: The G410 EnergySmart Roof membrane is a high-quality, thermoplastic PVC membrane with a fiberglass reinforcement. The G410 roof membrane has a unique lacquer coating applied to the top of the membrane to reduce dirt pick up.

Features and Benefits: • Excellent dimensional stability

• Meets EnergyStar/Title 24 Requirements for Cool Roofing (see pg. 2)

• Meets LEED/Green Globe Requirements for Cool Roofing (see pg. 2)

• Recycled content (see pg. 2)

• Lacquer coated to reduce dirt pick up

• Hot-air welded seams for long-term performance

• Proven membrane performance

Packaging: The G410 roof membrane rolls are wrapped in a protective film and strapped to a wood pallet. EnergySmart white, tan and light gray are avail-able as 10 ft. (3 meters) wide. EnergySmart patina green is availale as 6.5

ft. (2 meters) wide. 6.5 ft. rolls weigh between 161 - 195 lbs and the 10

ft. rolls weigh between 265-375lbs. Weight is dependent on thickness of membrane and/or feltbacking.

Installation: G410 is installed by a Sika Sarnafil Authorized Applicator. After proper preparation of the substrate, G410 is unrolled into Sarnacol adhesive in ac-cordance with Sika Sarnafil’s Technical requirements and then pressed into place with a minimum 100lb linoleum roller. The G410 is then heat-welded together by trained operators using Sika Sarnafil’s hot-air welding equip-ment. Different Sarnacol adhesives require different application methods.

Please consult Sika Sarnafil’s Applicator Handbook for detailed installation procedures.

Codes and Approvals: Sika Sarnafil’s Adhered Systems using G410 PVC membranes are clas-sified by Underwriters Laboratories, Inc., Underwriters Laboratories of Canada, FM Global, Miami-Dade and Florida Building Code. Sika Sar-nafil membranes also meet the material requirements of the International building code. For more information, please visit the “technical downloads” section of our website.

Availability: The G410 roof membrane is available directly from Sika Sarnafil Authorized Applicators. Contact your Sika Sarnafil Regional Office or visit our website for further information.

Maintenance: The G410 roof membrane requires no maintenance. As a prudent pre-ventative measure, Sika Sarnafil recommends that the Owner or that the Owner’s designated representative inspect the installed roof system for damage, plugged drains, weathered sealants, etc. at least twice a year and after each storm.

Warranty: Upon successful completion of the installed roof by the Sika Sarnafil Autho-rized Applicator, Sika Sarnafil can provide a Warranty to the Building Owner via the Authorized Applicator.

__48 __60 __72 __80 __Feltback

Janeille Highlight

Highlight

Technical Data (as manufactured):

Technical Support: Sika Sarnafil provides technical support. Please contact your local technical representative or technical manager if you need assistance.

ASTM Type II ASTM D-4434 Spec.

Parameters Test Method Requirement Typical Physical Properties 48 60 72 80 Reinforcing Material -- -- Fiberglass Fiberglass Fiberglass Fiberglass Overall Thickness, mil D638 45 48 60 72 80 Thickness Above Scrim, mil -- 16 24 30 36 40 Felt Weight oz/yd2 -- -- 9 9 9 9 Tensile Strength, min., psi, (Mpa) D638 Machine Direction 1500psi (10.4) 1500 1575 1625 1675 Cross Direction 1500psi (10.4) 1500 1550 1575 1625 Elongation at Break, min. D638 Machine Direction % 250 250 250 250 250 Cross Direction % 220 220 220 220 220 Seam Strength, min., (% of original)* D638 75 Pass Pass Pass Pass Retention of Properties After Heat Aging D3045 Tensile Strength, min., (% of original) D638 90 Pass Pass Pass Pass Elongation, min., (% of original) D638 90 Pass Pass Pass Pass Tearing Resistance (M.D.), min., lbf (N) D1004 10 (45.0) 15 17.5 20.5 22 Low Temperature Bend, -40 °F (-40 °C) D2136 Pass Pass Pass Pass Pass Accelerated Weathering Test (Florescent Light, UV exposure) G154 5,000 Hours 10,000 Hours 10,000 Hours 10,000 Hours 10,000 Hours Cracking (7x magnification) None None None None None Discoloration (by observation) Negligible Negligible Negligible Negligible Negligible Crazing (7x magnification) None None None None None Linear Dimensional Change (C.D.), % D1204 0.10% max. -0.02 -0.02 -0.01 -0.01 Weight Change After Immersion in Water, % D570 ± 3.0% max. 2.4 1.9 1.8 1.7 Static Puncture Resistance, 33 lbf (15 kg) D5602 Pass Pass Pass Pass Pass Dynamic Puncture Resistance, 7.3 ft-lbf (10 J) D5635 Pass Pass Pass Pass Pass Recycled Content (10’ & 5’ sheet only) 9% Pre-Consumer / 1% Post-Consumer

* Failure occurs through membrane rupture not seam failure.

Corporate Office Sika Sarnafil A Division of Sika Corporation 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: usa.sarnafil.sika.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Sarnafil A Business Unit of Sika Canada 6915 Davand Drive Mississauga, ON L5T 1L5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: can.sika.com ENERGY STAR for roofing products is only valid in the United States

Disclaimer: The information, and, in particular, the recommendation relating to the application and end-use of Sika Sarnafil products, are given in good faith based on Sika Sarnafil’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika Sarnafil recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, may be inferred from this information. The user of the product must determine the product’s suitability for the intended application and purpose. Sika Sarnafil reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.

Initial Solar 3 Year Initial Thermal 3 Year Thermal Initial Solar 3 Year Solar EnergySmart Colors Reflectance Reflectance Emittance Emittance Reflectance Index Reflectance Index

EnergySmart White *1 0.83 0.70 0.90 0.86 104 85 EnergySmart Tan *1 0.73 0.65 0.85 0.86 89 78 EnergySmart Light Grey *2 0.50 0.44 0.84 0.85 56 49 EnergySmart Patina Green *2 0.55 0.46 0.86 0.85 64 51

*1 Sika Sarnafil EnergySmart White and Tan membranes meet ENERGY STAR®, LEED, Green Globes and California’s Title 24 criteria for Low and Steep Slope applications. *2 Sarnafil EnergySmart Light Grey and Patina Green membranes meet ENERGY STAR®, LEED and Green Globes criteria for Steep Slope applications. EnergySmart Light Grey meets California’s Title 24 criteria for Steep Slope applications. EnergySmart Patina Green meets Title 24 criteria for steep slope applications with a 3 year calculated value of 0.445 when using Title 24’s aged reflectance equation.

Edition: 4/2012 Version no.: 0007

G410 Flashing Membrane

Overview: G410 flashing membrane is a heat-weldable thermoplastic roofing mem-brane formulated for direct exposure to the weather and is produced with an integral fiberglass mat reinforcement for dimensional stability. G410 flashing membrane is used to flash roof penetrations. It is also used as an exposed flashing membrane within Sarnafil waterproofing systems.

Composition: G410 flashing mebrane is a high-quality product containing ultraviolet light stabilizers, flame retardant, and reinforcement. G410 has a unique lacquer coating applied to the top of the membrane. The standard color of the weathering surface of G410 is white and the underside color is dark gray.

Features: G410 is available in 8” and 12” widths and is 60 mil (1.5 mm) thick. G410 flashing membrane comes in white, tan, light gray, patina green, lead gray, copper brown and evergreen.

Packaging: G410 flashing membrane rolls are provided individually and are sealed for shipping.

Installation: G410 flashing membrane is installed by Sika Sarnafil Authorized Applica-tors on walls, curbs and certain other penetrations using Sika Sarnafil’s Sarnacol adhesives. The seams are then heat welded together by trained operators using Sika Sarnafil’s hot-air welding equipment.

Availability: G410 flashing membrane is available directly from Sika Sarnafil Authorized Applicators when used within a Sika Sarnafil Roofing or Waterproofing System. Contact Sika Sarnafil or visit our website www.sikacorp.com for further information.

Codes and Approvals: Sika Sarnafil’s Adhered Systems using G410 PVC membranes are clas-sified by Underwriters Laboratories, Inc., Underwriters Laboratories of Canada, FM Global, Miami-Dade and Florida Building Code. Sika Sarnafil membranes also meet the material requirements of International building code.

Maintenance: G410 flashing membrane requires no maintenance. Standard maintenance of roofs, plaza decks and green roofs should include regular inspection of flashings, drains and termination sealants at least twice per year and after each storm.

Technical: Sika Sarnafil provides technical support. Technical staff is available to advise applicators as to the proper installation method.

Warranty: As a Sika Sarnafil-supplied accessory, G410 flashing membrane is included in Sika Sarnafil’s Standard or System Warranty.

ASTM Typical ASTM D-4434 Spec. Physical Parameters Test Method Requirement Properties

Reinforcing Material -- -- Fiberglass Overall Thickness(1), D638 0.045 (1.14) (see note 1) Thickness Above Scrim Tensile Strength, min., psi (MPa) D638 1500 (10.4) 1600 (11.1) Elongation at Break, min. D638 Machine Direction 250% 250% Cross Direction 220% 220% Seam Strength(2), min., (% of tensile strength) D638 75 80 Retention of Properties After Heat Aging D3045 -- -- Tensile Strength, min., (% of original) D638 90 95 Elongation, min., (% of original) D638 90 90 Tearing Resistance, min., lbf (N) D1004 10 (45.0) 14 (63.0) Low Temperature Bend, -40°F (-40°C) D2136 Pass Pass Accelerated Weathering Test (Florescent Light, UV exposure) G154 5,000 Hours 10,000 Hours Cracking (7x magnification) -- None None Discoloration (by observation) -- Negligible Negligible Crazing (7x magnification) -- None None Linear Dimensional Change D1204 0.10% max. 0.02% Weight Change After Immersion in Water D570 ± 3.0% max. 2.5% Static Puncture Resistance, 33 lbf (15 kg) D5602 Pass Pass Dynamic Puncture Resistance, 7.3 ft-lbf (10 J) D5635 Pass Pass Initial Solar Reflectance E903 -- 0.83 Emissivity E408, C1371, Other -- 0.90 Solar Reflective Index (SRI) E1980 -- 104

(1) Typical Physical Properties data is applicable for 0.048 in. (1.2 mm) membrane thickness and greater.

(2) Failure occurs through membrane rupture not seam failure.

Corporate Office Sika Sarnafil A Division of Sika Corporation 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: usa.sarnafil.sika.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Sarnafil A Business Unit of Sika Canada 6820 Davand Drive Mississauga, ON L5T 1J5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: can.sika.com

Disclaimer: All information provided by Sika Corporation (“Sika”) concerning Sika products, including but not limited to, any recommendations and advice relating to the application and use of Sika products, is given in good faith based on Sika’s current experience and knowledge of its products when properly stored, handled and applied under normal conditions in accordance with Sika’s instructions. In practice, the differences in materials, substrates, storage and handling conditions, actual site conditions and other factors outside of Sika’s control are such that Sika assumes no liability for the provision of such information, advice, recommendations or instructions related to its products, nor shall any legal relationship be created by or arise from the provision of such information, advice, recommendations or instructions related to its products. The user of the Sika product(s) must test the product(s) for suitability for the intended application and purpose before proceeding with the full application of the product(s).

Sika reserves the right to change the properties of its products without notice. All sales of Sika product(s) are subject to its current terms and conditions of sale which are available at usa.sarnafil.sika.com or by calling 800-451-2504.

Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product’s most current Technical Data Sheet, product label and Material Safety Data Sheet which are available at usa.sarnafil.sika.com or by contacting 800-451-2504. Nothing contained in any Sika materials relieves the user of the obligation to read and follow the warnings and instruction for each Sika product as set forth in the current Technical Data Sheet, product label and Material Safety Data Sheet prior to product use.

Edition: 11/2013 Version no.: 0009

G459 Flashing Membrane

Overview: G459 flashing membrane is a heat-weldable roofing membrane formulated for direct exposure to the weather and is produced with an integral fiber-glass mat reinforcement for dimensional stability. G459 flashing membrane is used to flash roof penetrations within a Sika Sarnafil roof system. G459 flashing membrane can be adhered directly to asphalt or other contami-nated surfaces.

Composition: G459 flashing membrane is a high quality product containing PVC resin, pigments, stabilizers, ultraviolet absorbers, and a fiberglass carrier sheet.

G459 flashing membrane comes in 6.5 ft. x 65 ft. and 3.25 x 65 ft. options and is 60 mil (1.5mm) thick. The standard color is white on tan. The tan side of the membrane must be the side exposed to the contamination.

Features: G459 flashing membrane’s glass reinforcement makes it highly dimension-ally stable which is ideal for adhered flashing applications at walls, termina-tions and penetrations. G459 flashing membrane is resistant to asphalt and many other rooftop contaminates. Sika Sarnafil recommends testing for compatibility. Contact Sika Sarnafil’s Corporate or Regional Offices.

Packaging: G459 flashing membrane rolls are provided individually and are sealed for shipping. Individual rolls are 168 lbs for 6.5 ft. x 65 ft. and 83 lbs for 3.25 x 65 ft.

Installation: G459 flashing membrane is installed by Sika Sarnafil Authorized Applicators on walls curbs and certain other penetrations using Sika Sarnafil’s Sarnacol adhesives. The seams are then heat welded together by trained operators using Sika Sarnafil’s hot-air welding equipment.

Availability: G459 flashing membrane is available directly from Sika Sarnafil Authorized Applicators. Contact your Sika Sarnafil Regional Office or visit our website for further information.

Codes and Approvals: Sika Sarnafil’s Adhered Systems using G410 PVC membranes are clas-sified by Underwriters Laboratories, Inc., Underwriters Laboratories of Canada, FM Global, Miami-Dade and Florida Building Code. Sika Sarnafil membranes also meet the material requirements of International building code.

Maintenance: G459 flashing membrane requires no maintenance.

Technical: Sika Sarnafil provides technical support. Technical staff is available to advise Applicators as to the correct installation methods of G459 flashing membrane.

Warranty: As a Sika Sarnafil-supplied accessory, G459 flashing membrane is included in Sika Sarnafil’s Standard or System Warranty to the Building Owner.

Typical ASTM Physical Parameters Test Method Properties

Reinforcing Material -- Fiberglass Overall Thickness, min., inches (mm) D638 0.060 (1.5) Tensile Strength, min., psi (MPa) D638 1600 (11.1) Elongation at Break, min. D638 270% M.D.

250% C.M.D.

Seam Strength*, min., ( % of tensile strength) D638 80 Retention of Properties After Heat Aging D3045 -- Tensile Strength, min., (% of original) D638 95 Elongation, min., (% of original) D638 90 Tearing Resistance, min., lbf (N) D1004 14 (63.0) Low Temperature Bend, -40 °F (-40 °C) D2136 Pass Accelerated Weathering Test (Florescent Light, UV exposure) G154 Pass Cracking (7x magnification) -- None Discoloration (by observation) -- Negligible Crazing (7x magnification) -- None Linear Dimensional Change D1204 0.02% Weight Change After Immersion in Water D570 2.5% Static Puncture Resistance, 33 lbf (15 kg) D5602 Pass Dynamic Puncture Resistance, 7.3 ft-lbf (10 J) D5635 Pass

* Failure occurs through membrane rupture not seam failure.

Corporate Office Sika Sarnafil A Division of Sika Corporation 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: usa.sarnafil.sika.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Sarnafil A Business Unit of Sika Canada 6915 Davand Drive Mississauga, ON L5T 1L5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: can.sika.com

Disclaimer: All information provided by Sika Corporation (“Sika”) concerning Sika products, including but not limited to, any recommendations and advice relating to the application and use of Sika products, is given in good faith based on Sika’s current experience and knowledge of its products when properly stored, handled and applied under normal conditions in accordance with Sika’s instructions. In practice, the differences in materials, substrates, storage and handling conditions, actual site conditions and other factors outside of Sika’s control are such that Sika assumes no liability for the provision of such information, advice, recommendations or instructions related to its products, nor shall any legal relationship be created by or arise from the provision of such information, advice, recommendations or instructions related to its products. The user of the Sika product(s) must test the product(s) for suitability for the intended application and purpose before proceeding with the full application of the product(s). Sika reserves the right to change the properties of its products without notice. All sales of Sika product(s) are subject to its current terms and conditions of sale which are available at usa.sarnafil.sika.com or by calling 800-451-2504.

Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product’s most current Product Data Sheet, product label and Safety Data Sheet which are available online at usa.sarnafil.sika.com or by calling Sika’s Technical Service Department at 800-451-2504. Nothing contained in any Sika materials relieves the user of the obligation to read and follow the warnings and instruction for each Sika product as set forth in the current Product Data Sheet, product label and Safety Data Sheet prior to product use.

Sika warrants this product for one year from date of installation to be free from manufacturing defects and to meet the technical properties on the current Product Data Sheet if used as directed within shelf life. User determines suitability of product for intended use and assumes all risks. Buyer’s sole remedy shall be limited to the purchase price or replacement of product exclusive of labor or cost of labor.

NO OTHER WARRANTIES EXPRESS OR IMPLIED SHALL APPLY INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTEL-

LECTUAL PROPERTY RIGHTS HELD BY OTHERS.

Edition: 2/2013 Version no.: 0007

Sarnaclad

Overview: Sarnaclad is a heat-weldable flashing product used with Sarnafil G and S membranes to form a monolithic roofing or waterproofing system.

Composition: Sarnaclad is a 24 gauge, G90 galvanized metal sheet with a 20 mil (0.5

mm) unsupported Sarnafil membrane laminated on one side. Sarnaclad is available in seven standard colors. Standard colors are Copper Brown, White, Evergreen, Lead Gray, Light Gray, Patina Green, and Tan. Sika Sar-nafil’s Energy Star rated EnergySmart Roof® color family consists of White, Tan, Light Gray, and Patina Green. The dimensions of Sarnaclad are 4 ft x 8 ft (1.2 m x 2.4 m) or 4 ft x 10 ft (1.2 m x 3.0 m).

Recycled Content (metal): 25% Post Consumer, 6% Pre Consumer Recycled Content (membrane): 0%

Packaging: See Technical Data section for information.

Installation: Sarnaclad is cut to size and formed to shape on standard sheet metal equipment. Sarnaclad is fastened in position in accordance with Sika Sar-nafil Technical requirements. The Sarnaclad joints are covered by 2 inch (50 mm) wide aluminum foil tape and then made watertight by heat-weld-ing a 4 inch (100 mm) wide G410 membrane strip over the tape. By use of a Sarnafil G or S coverstrip, the roofing or waterproofing membrane is then heat-welded to the Sarnaclad.

Availability: Sarnaclad is available directly from Sika Sarnafil Authorized Applicators when used within a Sika Sarnafil roofing or waterproofing system. Contact your Sika Sarnafil Regional Office or visit our website for further informa-tion.

Features: Sarnaclad is a durable and attractive flashing product capable of being formed into a large variety of shapes and profiles. Heat-welding of Sar-nafil G and S membranes to Sarnaclad assures watertight integrity. The Sarnaclad has a unique lacquer coating to resist staining from airborne dirt and pollutants.

Warranty: As a Sika Sarnafil-supplied accessory, Sarnaclad is included in Sika Sarnafil’s Standard or System Warranty to the Building Owner.

Sheets/Pallet Size Weight/Sheet Weight/Pallet

25 4 ft x 8 ft 35 lbs (16 kg) 905 lbs (410.5 kg) (1.2 m x 2.4 m)

25 4 ft x 10 ft 44 lbs (20 kg) 1,130 lbs (512.6 kg) (1.2 m x 3.0 m)

Recycled Content (metal): 25% Post Consumer, 6% Pre Consumer Recycled Content (membrane): 0%

Technical Data: Sika Sarnafil provides technical support. Technical staff is available to ad-vise Applicators as to the correct installation method of Sarnaclad.

Maintenance: Sarnaclad requires no maintenance.

Corporate Office Sika Sarnafil A Division of Sika Corporation 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: usa.sarnafil.sika.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Sarnafil A Business Unit of Sika Canada 6915 Davand Drive Mississauga, ON L5T 1L5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: can.sika.com

Disclaimer: All information provided by Sika Corporation (“Sika”) concerning Sika products, including but not limited to, any recommendations and advice relating to the application and use of Sika products, is given in good faith based on Sika’s current experience and knowledge of its products when properly stored, handled and applied under normal conditions in accordance with Sika’s instructions. In practice, the differences in materials, substrates, storage and handling conditions, actual site conditions and other factors outside of Sika’s control are such that Sika assumes no liability for the provision of such information, advice, recommendations or instructions related to its products, nor shall any legal relationship be created by or arise from the provision of such information, advice, recommendations or instructions related to its products. The user of the Sika product(s) must test the product(s) for suitability for the intended application and purpose before proceeding with the full application of the product(s).

Sika reserves the right to change the properties of its products without notice. All sales of Sika product(s) are subject to its current terms and conditions of sale which are available at usa.sarnafil.sika.com or by calling 800-451-2504.

Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product’s most current Technical Data Sheet, product label and Material Safety Data Sheet which are available at usa.sarnafil.sika.com or by contacting 800-451-2504. Nothing contained in any Sika materials relieves the user of the obligation to read and follow the warnings and instruction for each Sika product as set forth in the current

Edition: 5/2009 Version no.: 0005

Sarnareglet

Overview: Sarnareglet is a heavy-duty counterflashing used as a key component within certain flashing details for Sika Sarnafil roofing and waterproofing systems. Sarnareglet has a 2-¼ in (57 mm) deep profile and is provided in 10 ft (3.05 m) lengths. Sarnareglet is 0.10 in - 0.12 in (2.5 mm - 3 mm) thick and weighs 3 lbs (1.4 kg) per 10 ft (3.05 m) length.

Composition: Sarnareglet is produced from 6063T5 extruded aluminum and is provided with predrilled holes at 8 in (20 cm) o.c. for attachment to walls or curbs.

The holes are symmetrically offset from the ends of the Sarnareglet and are slotted to allow for thermal expansion and contraction.

Installation: A passive sealant bed is first applied to the wall or high curb according to Sika Sarnafil’s Detail Drawings. The membrane flashing or the Sarnac-lad flashing is then installed. The Sarnareglet is positioned, leveled and fastened to the wall or curb against the top of the flashing to securely clamp the flashing in place. The primary (active) sealant is then applied onto the Sarnareglet sealant shelf and rolled/feathered according the sealant manufacturer’s recommendations or requirements.

Availability: Sarnareglet is available directly from Sika Sarnafil Authorized Applicators when used within a Sika Sarnafil Roofing or Waterproofing System. Con-tact Sika Sarnafil or visit our website www.sikacorp.com for further informa-tion.

Features: Sarnareglet has a unique design that optimizes caulk/sealant performance and clamping action at critical points. A “shelf” is incorporated into the ex-truded shape that fully supports the sealant bed while allowing the optimal quantity and cross sectional shape of sealant to be applied. Sarnareglet has reinforcing ribs designed to clamp the Sarnafil membrane or Sarnaclad flashing in place and to increase rigidity between fastening points. Supple-mental accessories include prefabricated splice plates to cover joints be-tween sections of Sarnareglet and pre-welded Sarnareglet 90 degree inside and outside corners.

Packaging: Sarnareglet is provided in a sealed cardboard tube weighing approximately 50 lbs (23 kg). Each tube yield 150 lineal ft (45.7 m). Each tube also con-tains 15 splice plates.

Technical: Sika Sarnafil provides technical support. Technical staff is available to advise applicators as to the proper installation method.

Maintenance: Sarnareglet requires no maintenance (the sealant does require mainte-nance).

Warranty: As a Sika Sarnafil-supplied accessory, Sarnareglet is included in Sika Sarnafil’s Standard or System Warranty.

Corporate Office Sika Sarnafil A Division of Sika Corporation 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: www.sikacorp.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Sarnafil A Business Unit of Sika Canada 6820 Davand Drive Mississauga, ON L5T 1J5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: www.sika.ca

Disclaimer: The information, and, in particular, the recommendation relating to the application and end-use of Sika Sarnafil products, are given in good faith based on Sika Sarnafil’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika Sarnafil recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no war-ranty in respect of merchantability of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, may be inferred from this information. The user of the product must determine the product’s suitability for the intended application and purpose. Sika Sarnafil reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.

Edition: 04/2013 Version no.: 0002

Sarnastack Universal

Overview: Sarnastack Universal is a 60 mil (1.5 mm) thick prefabricated stack/pipe boot used as a time-saving and attractive part of a Sika Sarnafil roofing system. Sarnastack Universal comes in EnergySmart White, Tan and Light Gray.

Composition: Sarnastack Universal is injection molded with the same time-proven formu-lation used in our Sarnafil membranes.

Packaging: Sarnastack Universal is packaged in boxes of 8 pieces and comes with custom made stainless steel clamps. Each box weighs a total of 30 lbs (13.6 kg).

Installation: Sarnastack Universal’s lower flange is heat welded in place with a hand-held hot-air welder and roller. The top is then clamped to the stack/pipe using the clamp provided. Sikaflex 1a is then used to caulk around the top.

Availability: Sarnastack Universal is available directly from Sika Sarnafil Authorized Applicators when used within a Sika Sarnafil Roofing or Waterproofing System.

Features: Sarnastack Universal simplifes the flashing procedures for stack/pipe details reducing the risk of leakage. They are available in one size which accomodates stack/pipe penetrations from 3/4” - 8” (19mm-203mm) in diameter. Sarnastack Universal is heat-welded in place, becoming an inte-gral part of the Sika Sarnafil roofing system.

Warranty: As a Sika Sarnafil supplied accessory, Sarnastack Universal is included in Sika Sarnafil’s Standard or System Warranty.

Maintenance: Sarnastack Universal requires no maintenance. Periodic maintenance of a Sika Sarnafil system ensures extended performance and reduces life cycle costs. Consistent with industry practices, Sika Sarnafil recommends in-specting the roof system for damage, plugged drains, weathered sealants, etc. at least twice a year and after each storm.

Corporate Office Sika Sarnafil A Division of Sika Corporation 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: usa.sarnafil.sika.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Sarnafil A Business Unit of Sika Canada 6915 Davand Drive Mississauga, ON L5T 1L5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: can.sika.com

Disclaimer: All information provided by Sika Corporation (“Sika”) concerning Sika products, including but not limited to, any recommendations and advice relating to the application and use of Sika products, is given in good faith based on Sika’s current experience and knowledge of its products when properly stored, handled and applied under normal conditions in accordance with Sika’s instructions. In practice, the differences in materials, substrates, storage and handling conditions, actual site conditions and other factors outside of Sika’s control are such that Sika assumes no liability for the provision of such information, advice, recommendations or instructions related to its products, nor shall any legal relationship be created by or arise from the provision of such information, advice, recommendations or instructions related to its products. The user of the Sika product(s) must test the product(s) for suitability for the intended application and purpose before proceeding with the full application of the product(s).

Sika reserves the right to change the properties of its products without notice. All sales of Sika product(s) are subject to its current terms and conditions of sale which are available at usa.sarnafil.sika.com or by calling 800-451-2504.

Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product’s most current Technical Data Sheet, product label and Material Safety Data Sheet which are available at usa.sarnafil.sika.com or by contacting 800-451-2504. Nothing contained in any Sika materials relieves the user of the obligation to read and follow the warnings and instruction for each Sika product as set forth in the current

Edition: 10/2011 Version no.: 0001

Sarnacorners - Inside

Overview: Sarnacorners - Inside are a 60 mil (1.5 mm) thick prefabricated corner used as a time-saving and attractive part of a wall flashing detail. Sarnacorners

- Inside come in EnergySmart white.

Composition: Sarnacorners - Inside are injection molded with the same time-proven for-mulation used in our Sarnafil membranes.

Packaging: Sarnacorners - Inside are packaged in boxes of 10 pieces. Each box weighs a total of 30 lbs (13.6 kg).

Installation: After the wall flashings are installed, Sarnacorners - Inside are heat welded in place with a hand-held hot-air welder and roller. No caulking or sealants are necessary.

Availability: Sarnacorners - Inside are available directly from Sika Sarnafil Authorized Applicators when used within a Sika Sarnafil Roofing or Waterproofing System.

Features: Sarnacorners - Inside simplify the flashing procedures for inside corner details reducing the risk of leakage. They are available in one size which accomodates most inside corners. Sarnacorners - Inside are heat-welded in place, becoming an integral part of the flashing assembly.

Warranty: As a Sika Sarnafil supplied accessory, Sarnacorners - Inside are included in Sika Sarnafil’s Standard or System Warranty.

Maintenance: Sarnacorners - Inside require no maintenance. Periodic maintenance of a Sika Sarnafil system ensures extended performance and reduces life cycle costs. Consistent with industry practices, Sika Sarnafil recommends in-specting the roof system for damage, plugged drains, weathered sealants, etc. at least twice a year and after each storm.

Corporate Office Sika Sarnafil A Division of Sika Corporation 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: usa.sarnafil.sika.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Sarnafil A Business Unit of Sika Canada 6820 Davand Drive Mississauga, ON L5T 1J5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: can.sika.com

Disclaimer: The information, and, in particular, the recommendation relating to the application and end-use of Sika Sarnafil products, are given in good faith based on Sika Sarnafil’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika Sarnafil recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no war-ranty in respect of merchantability of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, may be inferred from this information. The user of the product must determine the product’s suitability for the intended application and purpose. Sika Sarnafil reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product

Edition: 10/2011 Version no.: 0001

Sarnacorners - Outside

Overview: Sarnacorners - Outside are a 60 mil (1.5 mm) thick prefabricated corner used as a time-saving and attractive part of curb and wall flashing details.

Sarnacorners - Outside are available in EnergySmart white.

Composition: Sarnacorners – Outside are injection molded with the same time-proven formulation used in Sarnafil membranes.

Packaging: Each carton contains 20 outside corners. Each box weighs a total of 30 lbs (13.6 kg).

Installation: After the curb or wall flashings are installed, Sarnacorners - Outside -are heat welded in place with a hand-held hot-air welder and roller. No caulking or sealants are necessary.

Availability: Sarnacorners - Outside are available directly from Sika Sarnafil Authorized Applicators when used within a Sika Sarnafil Roofing or Waterproofing System.

Features: Sarnacorners – Outside simplify the flashing procedures for various penetrations, reducing the risk of leakage at outside corner details. They are available in one size which will accommodate most outside corners.

Sarnacorners - Outside are heat-welded in place, becoming an integral part of the flashing assembly.

Warranty: As a Sika Sarnafil supplied accessory, Sarnacorners - Outside are included in Sika Sarnafil’s Standard or System Warranty.

Maintenance: Sarnacorners - Outside require no maintenance. Periodic maintenance of a Sika Sarnafil system ensures extended performance and reduces life cycle costs. Consistent with industry practices, Sika Sarnafil recommends inspecting the roof system for damage, plugged drains, weathered seal-ants, etc. at least twice a year and after each storm.

Corporate Office Sika Sarnafil A Division of Sika Corporation 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: usa.sarnafil.sika.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Sarnafil A Business Unit of Sika Canada 6820 Davand Drive Mississauga, ON L5T 1J5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: can.sika.com

Disclaimer: The information, and, in particular, the recommendation relating to the application and end-use of Sika Sarnafil products, are given in good faith based on Sika Sarnafil’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika Sarnafil recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no war-ranty in respect of merchantability of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, may be inferred from this information. The user of the product must determine the product’s suitability for the intended application and purpose. Sika Sarnafil reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product

Edition: 01/2014 Version no.: 0010

Sarnatherm - Tapered Insulation

Overview: Sarnatherm is a rigid polyisocyanurate insulation board that comes with either a glass fiber reinforced cellulosic felt facer or coated polymer bonded glass fiber mat facer. Sarnatherm is installed directly on the roof deck or directly on the old roof surface prior to application of the Sika Sarnafil membrane. Sarnatherm with a felt facer has one marked side that can be used for hot BUR and midified bitumen. Sarnatherm with a glass mat facer CANNOT be used with hot-applied systems.

Composition: The core of Sarnatherm is isocyanurate foam. Sarnatherm with a felt facer has between 16% and 43% by weight recycled content depending on thick-ness (55% post consulmer, 45% post-industrial). Sarnatherm with a glass facer does not have any recycled content.

Sarnatherm is available in 4 ft x 4 ft (1.2 m x 1.2 m) or 4 ft x 8 ft (1.2 m x

2.4 m) sizes and various thickness depending upon the Sika Sarnafil roof system and thermal resistance requirements.

Storage: Factory applied packaging is intended only for protection during transit.

When stored outdoors or on the job site, the insulation should be stacked on pallets at least four inches above ground level and completely covered with a weatherproof covering such as a tarpaulin. The temporary factory-applied packaging should be slit or removed to prevent accumulation of condensation. Roof insulation which has become wet or damaged should be removed and replaced with solid, dry insulation.

Features: Sarnatherm is compatible with all Sarnafil membranes and systems without the use of a separation layer or an overlayment on most applications. Sar-natherm is installed in multiple layers. The tapered configuration enhances rooftop drainage.

Packaging: Sarnatherm is provided in labeled bundles that are wrapped in a protective polyethylene film for protection DURING TRANSIT ONLY. The amount of Sarnatherm per bundle varies with board thickness and type.

Installation: Sarnatherm is installed by a Sika Sarnafil Authorized Applicator. Sarna-therm may be installed either by mechanical-attachment to the roof deck with Sarnafasteners and Sarnaplates, by full attachment with low rise sprayed urethane foam or hot asphalt, or partial attachment with foam adhesive (options depend on deck type and Sika Sarnafil system to be in-stalled). Contact Sika Sarnafil regarding alternative methods of attachment.

Availability: Sarnatherm is available directly from Sika Sarnafil Authorized Applica-tors when used within a Sika Sarnafil Roofing or Waterproofing System.

Contact Sika Sarnafil or visit our website usa.sarnafil.sika.com for further information.

Warranty: As a Sika Sarnafil-supplied accessory, Sarnatherm is included in Sika Sar-nafil’s System Warranty.

Maintenance: Sarnatherm requires no maintenance. Areas of frequent rooftop traffic may require protection from damage.

Cellulosic Felt Facer ___ Glass Fiber Mat Facer___

Technical Data (as manufactured) for ASTM C1289-06, Type II, Class 1, Grade 2:

THICKNESS SLOPE AVERAGE

in. mm foot 30.5 cm LTTR 2RSI 0.5-1.0 12-25 1/8” 3 mm 4.2 0.74 1.0-1.5 25-38 1/8” 3 mm 7.0 1.24 1.5-2.0 38-50 1/8” 3 mm 9.9 1.75 2.0-2.5 50-63 1/8” 3 mm 12.9 2.28 0.5-1.25 12-32 1/4” 6 mm 5.6 0.99 1.5-2.5 38-63 1/4” 6 mm 11.4 2.01 0.5-2.5 12-63 1/2” 12 mm 8.5 1.5

PRE-CUT CRICKETS

in. mm foot 30.5 cm LTTR 2RSI

0.5-1.5 12-38 1/4” 6 MM 6 1.06

1.5-2.5 38-63 1/4” 6 MM 12.1 2.13

0.5-2.5 12-63 1/2” 12 MM 9.0 1.58

2.0 50 N/A N/A 12.1 2.13 Standard Thicknesses Are Listed. Contact Your Regional Office For Other Available Thicknesses.

LTTR (long term thermal resistance) values were determined in accordance with CAN/ULC-S770-09. Test samples were third party selected and tested by an accreditted material testing laboratory. The LTTR results were reviewed by FM Global and certified by the PIMA Quality Mark Program.

2RSI is the metric expression of R-value (m2 - K?W).

*Multi-layer application is strongly recommended when the total insulation thickness exceeds 2.5”.

Property Test Method Typical

Compressive Strength ASTM D1621 20 psi (140 kPa) Water Vapor Transmission ASTM E96 CAN/ULC <1.5 perm (85.0 ng/(Pa·s·m²)), >60.0ng/ (Pa·s·m²) Product Density ASTM D 1622 2.0 pcf nominal (32.04 kg/m3)

Flame Spread ASTM E84 (10 min.) 140-60 Smoke Development ASTM E84 (10 min.) 150-170 Dimensional Stability ASTM D2126 <2.0% (L x W) Water Absorbtion ASTM C209 & D2842 <1.5%, <3.5% Tensile Strength ASTM D1623 >730 psf (35 kPa) Service Temperature -- -100° to 250°F (-73°C / 121°C) 1Numerical ratings are not intended to reflect the performance under actual fire conditions. Flame spread index of < 75 and smoke development < 450 meetcode require-ments for foam plastic roof insulation. Codes exempt foam plastic insulation when used in FM 4450 of UL 1256.

Technical Product Data (typical values) *Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application meth-ods, test methods, actual site conditions and curing conditions.

Corporate Office Sika Corporation - Roofing 100 Dan Road Canton, MA 02021

Tel.: (781) 828-5400 1-800-451-2504 Fax: (781) 828-5365 Web: usa.sarnafil.sika.com Email: webmaster.sarnafil@us.sika.com

Canada Office Sika Corporation - Roofing 6915 Davand Drive Mississauga, ON L5T 1L5

Tel.: (905) 670-2222 1-800-268-0479 Fax: (905) 670-5278 Web: can.sika.com

Disclaimer: All information provided by Sika Corporation (“Sika”) concerning Sika products, including but not limited to, any recommendations and advice relating to the application and use of Sika products, is given in good faith based on Sika’s current experience and knowledge of its products when properly stored, handled and applied under normal conditions in accordance with Sika’s instructions. In practice, the differences in materials, substrates, storage and handling conditions, actual site conditions and other factors outside of Sika’s control are such that Sika assumes no liability for the provision of such information, advice, recommendations or instructions related to its products, nor shall any legal relationship be created by or arise from the provision of such information, advice, recommendations or instructions related to its products. The user of the Sika product(s) must test the product(s) for suitability for the intended application and purpose before proceeding with the full application of the product(s). Sika reserves the right to change the properties of its products without notice. All sales of Sika product(s) are subject to its current terms and conditions of sale which are available at usa.sarnafil.sika.com or by calling 800-451-2504.

Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product’s most current Product Data Sheet, product label and Safety Data Sheet which are available online at usa.sarnafil.sika.com or by calling Sika’s Technical Service Department at 800-451-2504. Nothing contained in any Sika materials relieves the user of the obligation to read and follow the warnings and instruction for each Sika product as set forth in the current Product Data Sheet, product label and Safety Data Sheet prior to product use.

Sika warrants this product for one year from date of installation to be free from manufacturing defects and to meet the technical properties on the current Product Data Sheet if used as directed within shelf life. User determines suitability of product for intended use and assumes all risks. Buyer’s sole remedy shall be limited to the purchase price or replacement of product exclusive of labor or cost of labor.

NO OTHER WARRANTIES EXPRESS OR IMPLIED SHALL APPLY INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTEL-

LECTUAL PROPERTY RIGHTS HELD BY OTHERS.

• ASTM C1289, Type II, Class 1, Grade 2 (20 psi) or Grade 3 (25 psi) • CAN/ULC-S704, Type 2, Class 3 or Type 3, Class 3 • CCMC No. 12464-L

• UL Certified for Canada – Insulated Roof Deck Assemblies Construction No. C38 and 52, Meet CAN/ULC-S126, CAN/ULC-S101 and CAN/ULC-S107

• UL Standard 1256 Classification – Construction No. 120, 123 & 292 • UL Standard 790 (ASTM E108) Roofing Systems Classification

• UL Standard 263 (ASTM E119) Fire Resistance Classification • UL Standard 1897 Uplift Resistance

• IBC Chapter 26 & NBC Sections on Foam Insulation

• California State Insulation Quality…