07_8100-001_Fireproofing_Mfr_Literature.pdf
PDF 242 KB Posted
- Attached to
- Z2DA--589A4-25-102, Install Dedicated Pharmacy Air Handler Federal contract opportunity
- Solicitation number
- 36C25526R0159
About this file
This is a product data sheet and specification document for Southwest Fireproofing Type 5 GP, a cementitious spray-applied fireproofing material manufactured by Carboline Company. The document provides technical specifications, physical properties, approval information, and application guidance for this fireproofing product.
Type 5 GP is a single-component powder fireproofing that is mixed with clean water prior to application. The material is noncombustible, asbestos-free, and mineral wool-free, with tested fire resistance ratings up to 4 hours. It is designed for interior application to structural columns, beams, joists, decks, walls, roofs, and precast concrete units, with a typical density of 15 pounds per cubic foot and compressive strength of 16.25 lbf/in². The product meets multiple UL design standards (over 100 available designs) and has been approved by the City of New York Department of Buildings under MEA reports for walls, beams, floors, ceilings, columns, and roof assemblies. Type 5 GP is shipped in 50-pound bags, has a shelf life of one year when stored indoors in a dry environment at temperatures between 32°F and 125°F, and requires no site additives. The document includes physical test data confirming noncombustibility, impact and deflection resistance, and acoustic properties. A supplementary document from Eason Construction LLC provides a fireproofing thickness schedule for the Truman VA Hospital Expansion in Columbia, Missouri, specifying Type 5 GP application thicknesses ranging from 0 to 3/4 inches for various structural components to achieve 1 to 2-hour fire ratings, with the requirement that steel components shall not be painted or primed prior to fireproofing application.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 07 81 00 Applied Fireproofing.pdf | ||
| 36C25526R0159 0004.pdf | ||
| Final Drawings Part-3.pdf | ||
| Final Drawings Part-1.pdf | ||
| 36C25526R0159 0003.docx | DOCX document | |
| Final Drawings Part-2.pdf | ||
| PRE-BID SIGN IN ROSTER.pdf | ||
| 589a4-25-102_Addendum 02_260828.pdf | ||
| 01 00 00 General Requirements RX.pdf | ||
| 36C25526R0159 0002.docx | DOCX document | |
| Finish schedule from drawings.pdf | ||
| 01 33 23- Shop Drawings Product DAta and Samples.pdf | ||
| finish schedule from specs.pdf | ||
| 01 00 10 - MEDICAL CENTER REQUIREMENTS RX.pdf | ||
| Phasing info.pdf | ||
| 01 32 16-15 Project Schedules RX.pdf | ||
| 01 91 00 General Commissioning Requirements RX.pdf | ||
| 36C25526R0159 0001.docx | DOCX document | |
| S02-Final Specifications 1068 pages.pdf | ||
| 36C25526R0159.docx | DOCX document | |
| P09-Final Drawings Part-2 Pages 37.pdf | ||
| P09-Final Drawings Part-1 Pages 37.pdf |
Show all 22
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Southwest Fireproofing Type 5 GP
December 2011 replaces May 2010 To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Carboline Company to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Carboline quality control. We assume no responsibility for coverage, performance or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY CARBOLINE, EXPRESS OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Carboline and Nullifire are registered trademarks of Carboline Company.
Selection & Specification Data Generic Type
Cementitious, noncombustible, inorganic fireproofing supplied as a single powder component that is mixed with clean, potable water prior to application.
Description A single package powder component mixed with clean, potable water before application.
Type 5GPTM is intended for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.
Features Cementitious – Durable, remains in place during construction and beyond.
Noncombustible Excellent film build – On all surfaces including columns, beams and decks.
Applicator friendly – High film build, injection of Accelerator A-20 is optional.
Asbestos-free – complies with EPA and OSHA regulations.
Mineral Wool free – no airborne fibers.
Styrene free – no toxic decomposition gases.
Economical – Maintains project on budget.
Multiple UL Designs – Provides for design flexibility with over 100 UL designs.
Quality Manufactured – under strict Carboline quality standards.
UL inspection service, consistent quality in every bag.
Ready to use – No site additives required.
Finish Type 5GPTM is normally left as a sprayed finish.
Primers Type 5GPTM neither promotes nor prevents corrosion. Fireproofing should not be considered part of the corrosion protection system. Primers are not required or recommended. For contour applications where steel is primed, bond strength must meet minimum UL criteria. Please contact the Fireproofing Division for further information.
Topcoats Generally not required. In severely corrosive atmospheres, consult Carboline Technical Service for selection of coating most suitable for the operating environment.
Selection & Specification Data (cont.)
Thickness Required thickness depends on desired rating and assembly to be fireproofed. Refer to design details.
Limitations Type 5GPTM is not intended for permanent direct exposure to weather or excessive physical abuse beyond normal construction cycles. Not recommended for use as refractory cement or where operating temperatures exceed 200°F (93°C).
Contact your Carboline representative for alternate product recommendations.
Physical Data (Typical Values) Type 5GPTM Color Non-Uniform Tan Density(1), ASTM E-605 15 pcf (240 kg/m³) min. avg.
Combustibility, ASTM E-136 Passed, noncombustible
Compressive Strength, ASTM E-761 16.25 lbf/in.² (112 kPa)
Cohesion / Adhesion, ASTM E-736 >200 lbf/ ft.²
Impact, ASTM E-760 Passed Deflection, ASTM E-759 Passed Corrosion of Steel, ASTM E-937 Passed
Air Erosion, ASTM E-859 0.00 g/ft. ² (0.00 g/m²) Surface Burning, ASTM E-84
Flame Spread: 0, Smoke: 0
Fungi Resistance, ASTM G-21 Passed, no growth
DOD Classification, ASTM-1042
Type I, NCR 50, class (a) category A
(1) Air dry at ambient conditions to constant weight. Do not force cure. Use ASTM E605 bead displacement method.
Acoustics, ASTM C-384 (applied to gypsum board) Min. Thickness,
in. (mm)
Octave band values NRC 250 500 1000 2000
0.3 in. (7.6) 0.21 0.29 0.30 0.84 0.37
0.45 in. (11.4) 0.29 0.37 0.53 0.70 0.51
Test reports and additional data available upon written request.
Southwest Fireproofing Type 5 GP
December 2011 replaces May 2010 To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Carboline Company to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Carboline quality control. We assume no responsibility for coverage, performance or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY CARBOLINE, EXPRESS OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Carboline and Nullifire are registered trademarks of Carboline Company.
Approvals
Construction Type Rating(s), hours
Design No.
ULI ULC
1 1.5 2 3 4
Protected Floor, Ceiling
B B B
B B
B B B U B U
B
R B B U R U
B
R B B R
R
B
B
R
B
D703 D739 D743 D753
D754
D788
F817
F818
Unprotected Floor, Ceiling
R
B R
R R B R
R R B R
R R B
B
D916 D917 D949
F906 Concrete Floor or Roof
U
B B
B B
R B B B B B
B B B B R
B B B R
J701 J704 J705 J709 J718 J919
Beam or Joist B
B B B B B B B B B
B U B B B B B B B B
B B B B B B B B B B
B B B
B B
B B B
B B
B B
B B
N706 N708 N736 N754 N791 S701 S702 S715 S739 S740
Protected Roof, Ceiling
B B B B
B B B B
B B B B
P701 P711 P717 P741
R705
Unprotected Roof, Ceiling
B R
R R
R R
P907 P921
Metal Wall Assembly
B B B B - U703 -
Columns - B B B
B B B
B B B B
B B B B
B B B B
X527 X771 X772 Y725
X822 Z805
Most frequently used designs are in bold.
R - Restrained, U - Unrestrained, B - Both R and U
Other UL Designs not included in the table are:
A702, D701, D704, D705, D706, D708, D709, D710, D711, D712, D715, D716, D722, D723, D725, D726, D727, D728, D729, D730, D740, D742, D744, D745, D746, D747, D748, D750, D751, D752, D756, D758, D905, D907, D909, D910, D920, G701, G702, G703, J706, J957, J966, N401, N404, N732, N756, P708, P709, P710, P675, P676, P714, P901, P902, P907, P919, P920, P923, P937, X701, X704, X722, X723, X751, X752
Other ULC Designs not included in the table are:
X808, X813, X819, X820, X821, Z806, Z807, Z810, NOTE: Designs are continuously updated and developed.
Contact your Carboline Representative for current information.
CITY OF NEW YORK / DEPARTMENT OF BUILDINGS
Type 5GPTM has been found acceptable for use in accordance with the following MEA report numbers:
MEA-55-04-M Vol. II Wall MEA 56-04-M Vol. II Beam and Floor / Ceiling MEA 409-02-M Vol. III Columns and Roof / Ceiling
Caution: When applying Type 5GPTM to flexible roof systems it is required that Type DK adhesive is used. Also be sure that all roof work is completed and water tight before commencing installation of fire protection. Roof traffic shall be limited to maintenance only after fire protection is applied and cured.
Packaging, Handling & Storage Shipping Weight (Approximate) 50 lb. (22.6 kg) bags.
Storage+
(General) Store indoors in a dry environment.
Storage Temperature 32°F (0°C) – 125°F (52°C)
Shelf Life+ 1 year
+Shelf Life: (actual stated shelf life) when stored indoors in a dry place and in original unopened containers.
+Storage: stored material must be kept dry or clumping of the material may occur.
EASON CONSTRUCTION LLC
2480 N. Lark Fenton, MO 63026
(636) 717-9006
(636) 717-9206 fax
FIREPROOFING DIVISION
Spray on Fireproofing Thickness Schedule Truman VA Hospital Expansion
Columbia, MO The fireproofing material will be Low Density Cementitious Southwest Type 5 GP as manufactured by Carboline Company. The fireproofing materials will be applied per plans and proposal. Below are various UL designs and thickness to obtain the hourly fire rating as specified. Steel components to receive fireproofing shall not be painted or primed per the steel specifications.
STRUCTURAL HOURLY UL DESIGN FIREPROOFING
STEEL / LOCATION RATING THICKNESS
Type 5:
Floor Beams 2 Hour D-949 3/8” Restrained
Floor Deck 2 Hour D-949 0” Restrained
Roof Beams 1 Hour P-741 3/8”
Roof Deck 1 Hour P-741 3/4”
Tube Columns 2 Hour X-771 3/8”
(Wide flanged) Columns 2 Hour Y-725 3/8”
File details come from the government source that posted it. Updated .