Hardware Materials BOD.pdf

35 Knuckle Ball Bearing Hinges

5 Knuckle Full Mortise Hinges Standard Weight Ball Bearing FBB179 – (ANSI A8112) Steel – polished and plated or phosphated and prime coated for painting FBB191 – (ANSI A2112) Brass or bronze – polished and plated or painted FBB191 (32) – (ANSI A5112) Stainless steel – highly polished FBB191 (32D) – (ANSI A5112) Stainless steel – satin finish

• For medium weight doors of average frequency

• All hinges have template screw hole location for use on either wood or hollow metal doors and frames

• Equipped with two Stanley permanently lubricated non-detachable ball bearings

• Pins in non-ferrous hinges are stainless steel

• Hole in bottom tip for easy pin removal

• Reversible flush tips and pins

• Hinges can be furnished as follows:

– with raised barrel (RB)

– with electric wires and/or switches (CE and/or CS)

– with hospital tips (HT)

– with decorative tips

– with security studs

– with non-removable pins (NRP)

Size Open Gauge of Metal Flat Head Screws

Per Piece Quantity Per

Box Quantity Per Case Case Weight

Machine Wood Bronze Steel

Lbs. (Kg) Lbs. (Kg)Inches (mm) Inches (mm)

3 1/2 x 3 (89 x 76) .123 (3.1) 6 - 10-24 x 1/2 6 -10 x 1 3 ea. 90 ea. 58 (26) 54 (24)

3 1/2 x 3 1/2 (89 x 89) .123 (3.1) 6 - 10-24 x 1/2 6 -10 x 1 3 ea. 90 ea. 65 (29) 59 (27)

4 x 3 1/2 (102 x 89) .130 (3.3) 8 - 12-24 x 1/2 8 -12 x 1 1/4 3 ea. 48 ea. 43 (19) 39 (18)

4 x 4 (102 x 102) .130 (3.3) 8 - 12-24 x 1/2 8 -12 x 1 1/4 3 ea. 48 ea. 45 (20) 42 (19)

4 1/2 x 4 (114 x 102) .134 (3.4) 8 - 12-24 x 1/2 8 -12 x 1 1/4 3 ea. 48 ea. 55 (25) 52 (24)

4 1/2 x 4 1/2 (114 x 114) .134 (3.4) 8 - 12-24 x 1/2 8 -12 x 1 1/4 3 ea. 48 ea. 59 (27) 55 (25)

5 x 4 (127 x 102) .146 (3.7) 8 - 12-24 x 1/2 4 -12 x 1 1/4 3 ea. 30 ea. 41 (19) 39 (18)

5 x 4 1/2 (127 x 114) .146 (3.7) 8 - 12-24 x 1/2 4 -12 x 1 1/4 3 ea. 30 ea. 45 (20) 43 (19)

5 x 5 (127 x 127) .146 (3.7) 8 - 12-24 x 1/2 4 -12 x 1 1/4 3 ea. 30 ea. 50 (23) 46 (21)

*6 x 4 1/2 (152 x 114) .160 (4.1) 10 -1/4 -20 x 1/2 5 -14 x 1 1/2 3 ea. 24 ea. 43 (19) 36 (16)

*6 x 5 (152 x 127) .160 (4.1) 10 -1/4 -20 x 1/2 5 -14 x 1 1/2 3 ea. 24 ea. 47 (21) 40 (18)

*6 x 6 (152 x 152) .160 (4.1) 10 -1/4 -20 x 1/2 5 -14 x 1 1/2 3 ea. 24 ea. 67 (30) 61 (28)

* Available in Steel only

Consult factory for other sizes not listed jbrooks Text Box Basis of Design jbrooks Cloud jbrooks Text Box Basis of Design jbrooks Cloud

2 5 Knuckle Ball Bearing Hinges

TABLE OF CONTENTS

5 knuckle hinge design Full mortise hinges .........................................................................................4-5 Half surface hinges ..........................................................................................6-7 Half mortise hinges .........................................................................................8-9 Full surface hinges ....................................................................................10-11

Slip-in hinges Pivot reinforced hinges Swing clear hinges ....................................................................................14-15 Plain bearing hinges

• The vertical load of the door is supported by through-hardened chrome alloy, vertical thrust ball bearing assemblies.

• The lateral load of the door is supported by the pin bearing on the inside of the hinge knuckles.

• Large cold headed, drawn stock of the pins and long bearing area within the knuckles distributes lateral wear over a greater area, resulting in increased life of the hinge.

• Approved for use on all types of fire doors up to 4’ x 10’ (1219mm x 3048mm), 8’ x 10’ (2438mm x 3048mm) pairs, to maintain the integrity of fire rated openings and walls. Refer to NFPA80.

5 Knuckle Ball Bearing Hinges

Lateral movement is reduced when bearings are in the outboard positions

Heavy Weight Bearing assemblies employ an anti-friction sleeve that provides positive lateral support not found in standard weight assemblies

Heavy Weight Standard Weight

Heavy Weight

Standard Weight jbrooks Text Box Basis of Design

4 5 Knuckle Ball Bearing Hinges

• For use on heavy doors or doors where high frequency is expected such as entrance doors to office buildings, stores, public buildings and corridor entrance doors to offices

• All hinges have template screw hole location for use on either wood or hollow metal doors and frames

• Equipped with four Stanley permanently lubricated non-detachable ball bearings

• Pins in non-ferrous hinges are stainless steel

• Hole in bottom tip for easy pin removal

• Reversible flush tips and pins

• Hinges can be furnished as follows:

– with raised barrel (RB)

– with electric wires and/or switches (CE and/or CS)

– with hospital tips (HT)

– with decorative tips

– with security studs

– with non-removable pins (NRP)

5 Knuckle Full Mortise Hinges Heavy Weight Ball Bearing FBB168 – (ANSI A8111) Steel – polished and plated or phosphated and prime coated for painting FBB199 – (ANSI A2111) Brass or bronze – polished and plated or painted FBB199 (32) – (ANSI A5111) Stainless steel – highly polished FBB199 (32D) – (ANSI A5111) Stainless steel – satin finish

Size Open Gauge of Metal Flat Head Screws

Per Piece Quantity Per

Box Quantity Per Case Case Weight

Machine Wood Bronze Steel

Lbs. (Kg) Lbs. (Kg)Inches (mm) Inches (mm)

4 1/2 x 4 1/2 (114 x 114) .180 (4.6) 8 - 12-24 x 1/2 8 -12 x 1 1/4 3 ea 30 ea. 45 (21) 42 (19)

5 x 4 1/2 (127 x 114) .190 (4.8) 8 - 12-24 x 1/2 8 -12 x 11/2 3 ea. 24 ea. 46 (21) 40 (18)

5 x 5 (127 x 127) .190 (4.8) 8 - 12-24 x 1/2 8 -12 x 11/2 3 ea. 24 ea. 50 (23) 46 (21)

6 x 4 1/2 (152 x 114) .203 (5.2) 10 - 1/4 -20 x 1/2 10 -14 x 11/2 3 ea. 24 ea. 63 (29) 53 (24)

6 x 5 (152 x 127) .203 (5.2) 10 - 1/4 -20 x 1/2 10 -14 x 11/2 3 ea. 24 ea. 65 (30) 55 (25)

6 x 6 (152 x 152) .203 (5.2) 10 - 1/4 -20 x 1/2 10 -14 x 11/2 3 ea. 24 ea. 76 (35) 61 (28)

8 x 6* (203 x 152) .203 (5.2) 16 - 1/4 -20 x 1/2 16 -14 x 11/2 3 ea. 12 ea. 57 (26) 51 (23)

8 x 8* (203 x 203) .203 (5.2) 16 - 1/4 -20 x 1/2 16 -14 x 11/2 3 ea. 12 ea. 68 (31) 61 (28)

* Available in Steel only

Consult factory for other sizes not listed jbrooks Text Box Basis of Design

135 Knuckle Ball Bearing Hinges

• Equipped with easily seated non-rising pins

• Reversible flush tips and pins

• Ideal for remodeling or new construction

• Available for full mortise application on square edge doors only

• Designed to replace existing 3 1/2” (89mm) or 4” (102mm) hinges for

Swing Clear openings (some modification of preparation may be required for residential use)

• Designed to swing doors completely clear of the opening when door is opened 95°

• Reversible flush tips and pins

• Ideal for remodeling or new construction

• Specify FBB248 and STSFBB248 for full mortise application on square edge doors

• Specify FBB258 and STSFBB258 for full mortise application on bevel edge doors

• Designed to swing doors completely clear of the opening when door is opened 90°

• Equipped with two Stanley permanently lubricated non-detachable ball bearings

• Hinges can be furnished with hospital tips (HT)

5 Knuckle Swing Clear Hinges Standard Weight Plain Bearing “Swing Clear” Full Mortise Steel – polished and plated or phosphated and prime coated for painting

F248 – (ANSI A8123)

Standard Weight Ball Bearing “Swing Clear” Full Mortise Steel – polished and plated or phosphated and prime coated for painting

FBB248 – (ANSI A8122)

FBB258 – (ANSI A8122)

Stainless steel – highly polished or satin finish

STSFBB248 – (ANSI A5122)

STSFBB258 – (ANSI A5122)

Class Number

Size Length of Joint

Gauge of Metal Flat Head Screws/

Per Piece

Quantity Per Box

Quantity Per Case Case

Weight

Inches (mm) Inches (mm) Lbs. (Kg)

F248 3 1/2 (89) .123 (3.1) 6-10 x 1 2 ea. 20 ea. 16 (7)

4 (102) .130 (3.3) 8-12 x 1 1/4 2 ea. 20 ea. 24 (11)

FBB248 (Shown) and STSFBB248 {For square edge doors}

FBB258 and STSFBB258 {For doors beveled 1/8” in 2” (3.2 in 51mm)}

Class Number

Size Length of Joint

Minimum Clearance Required Dimensions

"A"

Gauge of Metal

Flat Head Screws/ Per Piece

Quantity Per Box

Quantity Per Case Case

Weight

Frame Leaf Machine

Door Leaf Wood

Inches (mm) Inches (mm) Inches (mm) Lbs. (Kg)

FBB248, STSFBB248 4 1/2 (114) 2 1/8 (54) .134 (3.4) 4-12-24 x 1/2 4-12 x 1 1/4 3 ea. 24 ea. 36 (17)

FBB258, STSFBB258 4 1/2 (114) 2 1/8 (54) .134 (3.4) 4-12-24 x 1/2 4-12 x 1 1/4 3 ea. 24 ea. 36 (17) jbrooks Text Box Basis of Design

Tubular (bored) push/pull hardware

HL6

Tubular push/pull hardware

The HL6 push/pull hardware is a durable and versatile tubular latching solution for commercial and institutional settings.

The traditional design has a short throw angle, allowing the door to be opened with an easy push or pull action, even when hands are not free.

Features and benefits

� Quiet functionality

� Passage function

� Six mounting positions

� 10 finishes, including antimicrobial options

� Six available options, including engraving on handles

� Four backset sizes

� Two strike options

� Non-handed

� UL listed for all single labeled metal or wood doors

Dimensions

2-1/8

3-3/8

2 1⁄8"

5 1⁄2"

3 3⁄8"

4 1⁄2"

2 9⁄16" 11⁄2" 2 5⁄8" max

Functions

Schlage ANSI

HL6 –

Passage lock

• Latchbolt retracted by paddle from either side

• Inside paddle always free for immediate egress

4 • Schlage • Push/pull hardware

In tr od uc ti on

O rd er in g in st ru ct io ns En gr av in g gu id e S pe ci fi ca ti on s an d op ti on s P ro du ct o ve rv ie w a nd fu nc ti on s jbrooks Text Box Basis of Design

540H Series

Four-Part Lock – For the maximum flexibility in ordering a mortise FOUR-PART LOCK lock, BEST® provides a way to order your 40H lock in four parts: Inside Trim, Case Only, Outside Trim and Strike Packages. The kits that make up these four parts have been carefully designed so that when all three are combined you have everything found in a complete 40H lock. This order method is ideal for customers wanting to stock a variety of trim designs with a minimal number of lock cases.

Parts Ordering Made Easy – No more searching through service manuals or calling technical support for the right part numbers. BEST® has developed a variety of kits you can order when you only need part of a 40H mortise, rather than the whole lock.

Case Only – A Case Only lock includes all parts normally included with a complete lock that are not specifically associated with either the inside or outside trim, including: lock case, face plate, strike and strike box, fasteners (for case and strike), and installation instructions. Case Only mortise locks will be shipped in the standard mortise packaging, allowing trim kits to be included at a future date to make a complete lock.

Trim Kit – A 40H Trim Kit is simply one half of a complete trim package. An Outside Trim Kit must always be matched up with an Inside Trim Kit to operate with a lock. Each kit includes all the necessary parts (including fasteners) required for installation that are associated with just the one side of the door.

Lever Set – A lever set kit provides the inside lever assembly (with set screw) and outside lever assembly (with spindle attached). Thick Door and Tactile Lever options are available for this kit.

Faceplate Kit – Face Plate kit includes a finished faceplate and the appropriate screws. Security Head screws are an option for this kit.

Replacement Spindle – As a security feature, the outside spindle on the 40H is designed to twist off during abuse before any internal damage to the lock occurs. The Replacement Spindle kit is a quick, easy, and inexpensive way to replace any spindles damaged by attack or abuse. This kit includes the inside and outside spindles, plus the pin to attach the outside lever.

Screw Kit – Nothing’s more frustrating than spending time searching for the part number of a single screw. With the 40H Screw Kits, you don’t have to worry about that anymore. These kits have been designed to provide all the necessary fasteners for one lock in a single bag. All you need to know is the trim style and finish, and you’re set. Security head screws are an option for this kit.

Function Letter Chart

UNR ANSI ANSI UNAB

1DT F19 L

2DT F02 LB

F04 A LT

F20 AB F01 N

F04 AT F31 NX

F21 B F05 R

B5 F06 RHB

B7 F35 S

F08/F10 BA F13 T

BW F12 TA

F09 C TD

CHB F30 W

F07 D F17 AD

F14 G F29 RD

F15 H F16 WD

F15 HJ F18 YD

F34 INA UNR

F33 IND UNT

F32 INL UNAB

Strike Packages S1 – Standard strike:

4-7/8" x 1-1/4" x 3/32", nonhanded, curved lip, 1-1/4" lip to center strike. Fits standard door frame ANSI A115.1, and comes with plastic strike box.

S5 – Latchbolt-only strike:

4-7/8" x 1-1/4" x 3/32", handed, curved lip, 1-1/4" lip to center strike. Fits standard door frame ANSI A115.1, and comes with wrought steel strike box.

S6 – Latchbolt/Deadbolt strike:

4-7/8" x 1-1/4" x 3/32", handed, curved lip, 1-1/4" lip to center strike. Fits standard door frame ANSI A115.1, and comes with wrought steel strike box.

Strike Package

Case Only

Inside Kit

Outside Kit

Four-Part Lock jbrooks Text Box Basis of Design

1140H Series

40H Series - Standard Lever & Trims

Lever- 3 Rose - H

Lever- 12 Rose - H

Lever- 14 Rose - H

Lever- 15 Rose - H

Lever- 16 Rose - H

Lever- 17 Rose - H

Lever- 3 Rose - R

Lever- 12 Rose - R

Lever- 14 Rose - R

Lever- 15 Rose - R

Lever- 16 Rose - R

Lever- 17 Rose - R

Lever- 3 Rose - S

Lever- 12 Rose - S

Lever- 14 Rose - S

Lever- 15 Rose - S

Lever- 16 Rose - S

Lever- 17 Rose - S jbrooks Text Box Basis of Design

12 40H Sereis

40H Series - Standard Lever & Trims

Lever- 3 Escutcheon - J

Lever- 12 Escutcheon - J

Lever- 14 Escutcheon - J

Lever- 15 Escutcheon - J

Lever- 16 Escutcheon - J

Lever- 17 Escutcheon - J

Lever- 3 Escutcheon - M

Lever- 12 Escutcheon - M

Lever- 14 Escutcheon - M

Lever- 15 Escutcheon - M

Lever- 16 Escutcheon - N

Lever- 17 Escutcheon - N jbrooks Text Box Basis of Design

Surface Vertical Rod Exit Devices

S300

S460

Apex 2200 Series - Reversible Apex FL2200 Fire Exit Series - Reversible

Doors – For all types of single and double door applications. Available for 1-3/4” to 2-1/4” thick, up to 4’-0” wide by 10’-0” high openings. For thicker doors, consult factory. Furnished standard for 1-3/4” thick, 3’-0” wide by 7’-0” high openings.

Device – Covers ANSI A115.2 (Type 161), A115.18 cylinder lock and A115.1 (Type 86) Mortise Lock preparation.

Functions – Functions are field selectable. The device is furnished for a desired function if specified. If not specified the “03” function is furnished standard.

Base Material – The Covers, Touchbar, Device Channel, Lock/Hinge Side Filler, Vertical Rods and End Cap are furnished of heavy wrought Brass, Bronze or Stainless Steel. US28 Devices are furnished with Aluminum, Brass, Bronze and Stainless Steel components. See “Finish & Base Material” chart on page 3.

Chassis – Investment Cast Steel, Zinc Dichromated.

Top Latchbolt – Stainless Steel, Deadlocking, 3/4” throw.

Bottom Bolt – Steel plated, independent action 5/8” throw, with adjustment range to suit 3/4” door undercut.

Top Strike – No. S300 Surface applied, Investment Cast Stainless Steel, Black Powder Coated furnished standard.

For optional strikes see page 34.

Bottom Strike – No. S460, Flush mounted, Steel, Black Powder Coated.

Device Options Prefix Description Page C Quick Connect Plugs E Electric Device ELR Electric Latch Retraction DE* Delayed Egress FL Fire Exit Hardware HC Windstorm and Hurricane Code Device LS Latchbolt Monitoring Switch MLR Motorized Latch Retraction ..................................40-41 Q Wireless Access Management System ............30-32 TDS Touchbar Monitoring Double Switch TS Touchbar Monitoring Switch WTDS Weatherized Touchbar Mon. Dbl Switch WTS Weatherized Touchbar Mon. Switch To specify add Prefix to Device No. (e.g. TS2203)

* Rod guards are required. They are supplied by other manufacturers.

Suffix Description Page ALK Exit Alarm: battery operated ALW Exit Alarm: remote power BRL Braille Touchbar CD Cylinder Dogging DS Door Position Monitoring Switch LBR Less Bottom Rod LD Less Dogging SEC Security Screws SNB Sex Nut and Bolt TMB Transom Bracket WALW Weatherized Exit Alarm: remote power To specify add Prefix to Device No. (e.g. TS2203)

Dogging – 1/4” turn hex key dogging standard. NOT available on Fire Exit Hardware.

Touchbar Height – 39-15/16” from floor standard. Specify required height if other than standard.

Reversible – Reversible for all functions and trims. Standard packing RHRB.

UL Listed – Panic and Fire Exit Hardware. For FIRE EXIT HARDWARE Ratings see page 33. Conforms to UL10C and

UBC 7-2.

ANSI/BHMA – Devices are BHMA certified ANSI 156.3, Grade 1.

Finishes –

• 605 • 612 • 622 • 626W • 630

• 606 • 613 • 625 • 628 • 690

For finish description see page 3.

Cylinders – Rim type, not furnished standard. Specify when required. For cylinder details see page 19.

Stile Width – See Stile Information on page 36.

Less Bottom Rod (LBR) Option – Specify suffix “LBR” (e.g.

2208LBR). See UL FIRE LABEL RATING chart on page 39. Fire Rated Devices include FB277 Fire Bolt Assembly. For Fire Bolt Assembly image see page 35.

Retrofit Applications – The 2200 and FL2200 Series Devices are designed to retrofit into other manufacturers’ mounting hole locations. 1700 Series Pull Trim and 4900 Series Lever Trim may also be factory set for these applications by specifying prefix “R” (e.g. 2208 R4908A).

Apex 22 Series - Reversible The 22 Series Device is designed to be compatible with many manufacturers’ Access Control exterior trim. The device incorporates a center driven cam to receive the tailpiece of the access control product. The tailpiece rotation required to retract the latch is a minimum of 50 degrees.

Consult factory for details.

Apex 2000 Series Touchbar Exit Devices jbrooks Text Box Basis of Design

Overview

M400 Series electromagnetic locks from Schlage are designed with the customer in mind to be robust, easy-to-install, and secure. The unique bayonet mounting feature makes installation easier, allowing the installer to have their hands free during the mounting process.

All M400 Series electromagnetic locks are symmetrical with field-selectable handing, allowing optimum placement of the magnet, no matter the application. They are designed to provide automatic voltage sensing for 12 and 24 volts along with polarity protection to make wiring less complex. M450 models are tested and certified to meet or exceed UL 1034 and BHMA 1000 lb hold force requirements.

The M450 electromagnetic locks come in four configurations to meet your specific security needs. Single and double door models are offered in standard configurations.

Plus versions of these models with “P” designations add intelligent sensing and reporting features needed to integrate with access control systems along with additional available options. Kits are also available for top jam, double door, and glass door applications.

Features and benefits

§ 1000 lb. hold force rating for high security applications

§ “Plus” models offer magnetic bond sensor (MBS), adjustable relock time delay (RTD) and door position switch (DPS)

§ Automatic voltage selection (AVS)

§ Symmetrical design with field-selectable handing for optimum placement

§ Bayonet mount simplifies installation by eliminating the need to hold lock overhead while securing

§ Armature mount pivot feature compensates for slight opening imperfections

§ Optional mounting kits available for top jamb mount, double door and HERCULITE® brand glass doors

§ Aluminum housing in 628 satin finish

§ ANSI/BHMA 156.23 Grade 1, UL 1034, UL 10C, UL 294, cUL, CFSM certifications

§ Limited lifetime warranty on magnetic coil assembly

M450/452 Electromagnetic locks jbrooks Text Box Basis of Design

§ Single acting doors

§ Interior applications

§ Durable

§ Easy to install

§ Improved corrosion resistance

Materials and finishes

In brass, 300 Series stainless steel or steel, these models offer the broadest range of finishes in the industry to complement any design. Brass and stainless steel offer the highest resistance to corrosion, while all these base materials are suitable for normal interior use.

Finish Description

US3 Polished brass

US4 Satin brass

US10 Satin bronze

US10B Oil rubbed bronze

US32 Polished stainless steel

US32D Satin stainless steel

SP4 Powder coast brass

SP10 Powder coat bronze

SP28 Powder coat aluminum

SP313 Powder coat dark bronze

SPBLK Powder coat black

652 Chrome-like coating

Models Glynn-Johnson 450 Series holders and stops are designed for medium to light-duty applications.

They’re ideal for openings that are subject to normal activity, providing protection for the door, frame, hinges and surrounding walls or obstructions.

Designed for improved compatibility with most door closers, all models incorporate popular channel/slide arm design and offset jamb brackets. The improved design makes it easier to change functions in the field, should user requirements change.

450H Series hold-open

(Suffix H) These models conveniently hold doors open at a predetermined position, permitting unobstructed traffic flow.

These models feature an adjustable automatic hold-open that is activated when the door is opened to a preset angle. The hold-open tension can be adjusted using an allen wrench through the end of the slider located in the channel at the top of the door.

Each meets the 250,000 test cycles required for Grade 1 classification.

450 Series medium-duty Glynn-Johnson provides the most complete line of overhead holders and stops, offering solutions for the most demanding door control problems. These surface-mounted holders and stops offer the widest variety of functions, materials and finishes to fit all medium- to light-duty applications.

Glynn-Johnson 450 Series holders and stops provide reliable and versatile surface-mounted overhead door control for all medium to light-duty applications. The visible components are available in a wide variety of architectural finishes to complement any design.

The 450 Series holders and stops are designed for installation in virtually all types of doors and frames including doors with conventional butt hinges, offset pivots, continuous hinges, swing clear hinges and many other specialty hinges. The templates provided allow for variable mounting positions, ranging from 85° - 110° of opening.

Four models:

§ 450H Series hold-open model

§ 450S Series stop-only model

§ 450F Series friction hold-open model

§ 450SE Series special stop-only model

Five sizes:

§ Simple

§ Standardized

§ Each model is available in five sizes

Three options:

§ J—Angle jamb bracket

§ SHIM—Blade stop SHIM kit

§ Soc—Pin-in-socket security screw package

Unmatched convenience:

§ Non-handed

§ Improved compatibility with door closers

§ Improved jamb bracket design

450 Series surface overhead door holders/stops

26 • Glynn-Johnson • Door holders and stops jbrooks Text Box Basis of Design

15Copyright © 2001-2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

c h e c k m a t e ® s t o p s & h o l d e r s s u r f a c e m o u n t10 Series

*Butt hung only on this size door. No swing clear hinges.

Application

- Interior doors

- Doors are single acting

- Non-handed

- Recommended for moderate, medium weight doors

Features

- Standard duty, adjustable

- Slide track design

- Degree of opening fully adjustable and can be adapted to changing needs

- Heavy shock absorber spring provides compression before deadstop

- Can be ordered specifically as a stop, friction stay, or hold open.

- Multi-function unit is shipped as a stop. Can be converted to a hold open or friction in field. 5012- PKG (Adapter kit) included

- Complete screw packet with thru-bolts for door, wood and machine screws for frame

- Torx® screws optional for security applications, but heavy-duty units should be considered for high-security applications

- Standard architectural finishes

- Durable slider cam and shock block

- 110° maximum opening

- 3/4" square channel

- For pull side mounting or flush and rabbeted mounting on push side use angle jamb bracket adapter 5258

- Hanging means other than standard butts or offset pivots require special templating and pricing. Consult factory.

Compliance

- Stop function UL listed for fire door assemblies

Butts Offset Pivots

Center Hung Pivots Model Number

Friction H.O. Stop Multi

*18 - 24 21 - 26-1/2 10-116 10-126 10-136 10-146

24-1/16 - 30 26-9/16 - 32 10-216 10-226 10-236 10-246

30-1/16 - 36 32-1/16 - 38 10-316 10-326 10-336 10-346

36-1/16 - 42 38-1/16 - 45 10-416 10-426 10-436 10-446

42-1/16 - 48 45-1/16 - 48 10-516 10-526 10-536 10-546 door opening ch a rt (in inche s)

10 & 5 5 Series jbrooks Text Box Basis of Design

36 • LCN • 4000 Series

4040XP/4040XPT Series

/4

T S er ie s In tr od uc ti on

/4

T

S er ie s

P ro du ct s el ec ti on gu id e

/4

T S er ie s

X

P/

X

P T

S er ie s

/4

T S er ie s

A /4

AT

S er ie s

T

S er ie s

The 4040XP is LCN’s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.

Features

4040XP Series

Customized installation templates or products may be available to solve non-standard applications.

Contact LCN Product Support for assistance.

Special templates

Certifications Grade 1 - ANSI A156.4, UL 10C, ADA, 100 hour salt spray, meets BAA - Buy American Act

Body construction

� Cast iron body � Full complement bearing � 1 1⁄2" diameter piston � Double heat treated pinion journal

Fluid All weather liquid X fluid

Handing Non-handed

Templating Peel-n-Stick templates - 2 1⁄4" x 5" mounting hole pattern

Size Adjustable spring size 1-6, includes patented green dial

Warranty 30 years

Cover � Plastic Cover (PC), standard � Metal Cover (MC), optional

Fasteners Self reaming and tapping screws (SRT)

Mounting Hinge (pull side), top jamb (push side), parallel arm (push side)

Arms Regular arm

Finishes/colors/ powder coat

� 689 Aluminum � 690 Statuary bronze � 691 Light bronze � 693 Black � 695 Dark bronze � 696 Brass � Custom colors optional

� Optional SRI primer - powder coat only � Optional plated finishes

Closer available with less than 5.0 lbs. opening force on 36" door.

* Maximum opening/hold open point with standard template.

** Advanced Variable Back Check.

*** Delay feature incorporates standard 4040 cylinder (not XP).

120° 120° 180° 110° 110°

Hinge (p ull) side

Mounting

Top ja m b (p ull)

Top ja m b (p ush)

Para lle l a rm

Sto p fa ce

Powder c oat

Finish

Plate d

Plastic

Cover

Meta l

Non-h anded

Cylinder

Non-s ized

Accessibilit y

Delay Actio n

CYLAVB

Regular ( double)

Arm function*

Sta ndard

(s ingle)

Hold O pen

Fusible Link

EDA/HEDA

CUSH/HCUSH

SCUSH/SHCUSH

Double Egress jbrooks Text Box Basis of Design

41 • LCN • 4000 Series

4040XP/4040XPT Series

/4

T S eries Introduction

/4

T S eries P roduct selection guide

/4

T S eries

X

P/4

X P

T S eries

/4

T

S eries

A

/4

AT

S eries

T S eries

4040XP-3071

Cast iron cylinder assembly (CYL)

� Non-handed � Heavy duty

4041-3071 DEL

Delay Action Cylinder

(CYLDEL)

� Used for delayed action closing

� Non-handed � Heavy duty

4040XP-72

Plastic Cover (PC)

� Non-handed � Includes 4040XP-54 snap-on cover clip

4040XP-72MC

Metal Cover (MC)

� Handed � Required for plated finishes and custom powder coat finishes � Optional

CoversCylinders

Accessories

4040XP-3077EDA

Extra Duty Arm (EDA)

� Non-handed � Features forged, solid steel main and forearm for potentially abusive installations

� Optional

4040XP-3077ELR

Extra Long Arm (XLONG)

� Non-handed � Includes extra long rod and shoe, 4040XP-79ELR for top jamb mount with deep reveal

� Optional

4040XP-3049EDA

Hold Open Extra Duty Arm (HEDA)

� Handed � Parallel arm features forged, solid steel main and forearm for potentially abusive installations

� Hold open function is adjusted at the shoe

� Optional

4040XP-3049L

Hold Open Long Arm (HLONG)

� Non-handed � Includes long head and tube, 4040XP-3048L for top jamb mount

� Optional

4040XP-3077L

Long Arm (LONG)

� Non-handed � Includes long rod and shoe, 4040XP-79LR for top jamb mount

� Optional

4040XP-3049

Hold Open Arm (H)

� Non-handed � Mounts pull side or top jamb with shallow reveal, hold open adjustable shoe

� 4040XP closer includes 4040XP-62PA shoe required for parallel arm mounting

� Optional

4040XP-3077

Regular Arm (REGARM)

� Non-handed � Mounts pull side or top jamb with shallow reveal P4041 closer includes PA shoe, 4040XP-62PA required for parallel arm mounting

Arms

4040XP-3077CNS

Cush-n-Stop Arm (CUSH)

� Non-handed � Features solid forged steel main arm and forearm with stop in soffit shoe.

� Optional

4040XP-3049CNS

Hold Open Cush-n-Stop Arm

(HCUSH)

� Non-handed � Hold open function with templated stop/hold open points � Handle controls hold open function � Optional

4040XP-3049EDA/62G

Hold Open Extra Duty arm with 62G Thick Hub Shoe (HEDA62G)

� Handed � Features forged, solid steel main and forearm for potentially abusive installations

� 62G shoe provides additional blade stop clearance; hold open function is adjusted at the shoe

� Optional

4040XP-3077EDA/62G

Extra Duty Arm with 62G Thick Hub Shoe (EDAW62G)

� Non-handed � Features forged, solid steel main and forearm for potentially abusive installations

� 62G shoe provides additional blade stop clearance

� Optional jbrooks Text Box Basis of Design

A H inges & pivots

B Pulls & plates C

Flush bolts & coordinators

D Latches, catches & bolts E3

Stops F

Exterior hardw are

G M iscellaneous hardw are

Ives Architectural hardware products E3

Floor stops — dome

PAD

FLOOR

1" OR

LESS

1"

1-7/16"

FS438

FS436

FS436 Dome stop FS438 Dome stop FS436 for doors without threshold FS438 for doors with threshold or undercut doors Heavy-duty cast dome stops Packed with fasteners for light duty masonry and wood applications Grey rubber bumper

Certifications FS436 Meets ANSI/BHMA A156.16, L12141 for brass and L32141 for aluminum FS438 Meets ANSI/BHMA A156.16, L12161 for brass and L32161 for aluminum

Material substrate Made from cast brass or aluminum

Available accessory items Security pin screws

Dimensions

FS436

Overall height: 1" Base height: 3/16" Base diameter: 1-3/4" x 2" oval

FS438

Overall height: 1-3/8" Base height: 9/16" Base diameter: 1-3/4" x 2" oval

R435 Riser for FS436 Dome stop R437 Riser for FS438 Dome stop R435 for conversion of FS436 Dome stop to carpet installation R437 For conversion of FS438 Dome stop to carpet installation Packed with fasteners for heavy duty masonry and wood applications

Material substrate Made from aluminum, mill finish

Dimensions Base diameter: 1" X 1-7/16" oval Heights: available in 1/4", 3/8", 1/2" 5/8", 3/4" and 1" height

Finishes - Brass BHMA Description Substrate Finish

605 Bright brass Brass US3 606 Satin brass Brass US4 609 Blackened brass Brass US5 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 622 Matte black Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D --- Aged bronze Brass 643e/716

Finishes - Aluminum BHMA Description Substrate Finish

628 Satin aluminum Aluminum US28 For other colors, consult factory.

jbrooks Text Box Basis of Design

Ives Architectural hardware products E6

A H in ge s p iv ot s

B Pu lls pl at es C

Fl us h bo lt s & c oo rd in at or s D

La tc he s, c at ch es b ol ts

E6 St op s F

Ex te rio r h ar dw ar e

G M is ce lla ne ou s h ar dw ar e

Floor stops

FS444

FS441 Floor stop � Accommodates door undercut up to 1-1/2" � Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts � Grey non-marring rubber bumper � Packed with fasteners for heavy duty masonry and wood applications

Certifications � Meets ANSI156.16, L12131

Material substrate � Made from cast brass

Available accessory items � Replaceable grey non-marring rubber bumper

Dimensions � Overall height: 2-1/8" � Overall length: 2-7/8" � Base depth: 1-5/8"

FS444 Floor stop - masonry FS448 Floor stop - drywall/wood � Ideal for interior or exterior use � Accommodates door undercut up to 2-1/2" � Replaceable black non-marring rubber tip � FS444 is packed with fasteners for heavy duty masonry applications � FS448 is packed with fasteners for drywall/wood applications

Certifications � FS444 Meets ANSI/BHMA 156.16, L12131 for brass � FS448 Meets ANSI/BHMA 156.16, L12121 for brass and L32121 for aluminum

Material substrate � Made from cast brass and aluminum

Available accessory items � Replaceable black non-marring rubber bumper

Dimensions � Overall height: 3" � Base diameter: 2-1/2"

Finishes - Zinc BHMA Description Substrate Finish

605 Bright brass Brass US3 606 Satin brass Brass US4 609 Blackened brass Brass US5 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 622 Matte black Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D --- Aged bronze Brass 643e/716

For other colors, consult factory.

Finishes - Brass BHMA Description Substrate Finish

605 Bright brass Brass US3 606 Satin brass Brass US4

609* Blackened brass Brass US5 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 622 Matte black Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D --- Aged bronze Brass 643e/716

Finishes - Aluminum BHMA Description Substrate Finish

628* Satin aluminum Aluminum US28 For other colors, consult factory. * Not available on FS444.

jbrooks Text Box Basis of Design

B48

A H in ge s p iv ot s

B

Pu lls p la te s C

Fl us h bo lt s & c oo rd in at or s D

La tc he s, c at ch es b ol ts

E St op s F

Ex te rio r h ar dw ar e

G M is ce lla ne ou s h ar dw ar e

Protection plates

8400 Commercial protection plates 8402 UL Commercial protection plates � Door protection plates are available in .050" thick brass, stainless steel or aluminum; and 1/8" thick high impact polyethylene in clear or black.

� All plates, metal and plastic, come standard with four beveled edges and countersunk mounting holes (B-CS).

� Protection plates must be ordered in 1/2" increments. Available in other sizes, consult customer service � For 8402 UL Plates, UL mark appears in upper left corner. Not available on plastic protection plates. Special cutouts are not allowed on UL kick plates.

Certifications � Meets ANSI A156.6 for J301 � UL protection plates certified to UL10C

Mounting � Standard mounting package, 16 per pack

− #6 X 5/8 oval head screws � Optional TEK/TORX package, specify TK-TX

− #6 X 5/8 Self-drilling, Self-tapping screws − #6 X 5/8 Torx screws

Finishes � Aluminum 5005 Series, Brass C26800 Series, Stainless Steel 300

Series, Plastic BHMA Description Substrate Finish Max sizes

605 Bright Brass Brass US3 24"X48"

606 Satin Brass Brass US4 24"X48"

612 Satin Bronze Brass US10 24"X48"

613 Oil Rubbed Bronze Brass US10B 36"X48"

619 Satin Nickel Stainless US15 24"X48"

625 Bright Chrome Stainless US26 36"X48"

626 Satin Chrome Stainless US26D 48"X48"

628 Satin Aluminium Aluminium US28 48"X48"

629 Bright Stainless Steel Stainless Steel US32 48"X48"

630 Satin Stainless Steel Stainless Steel US32D 48"X48"

654 Satin Stainless Steel Stainless Steel US32D 48"X48"

BLK Matte Black Stainless Steel BLK 24"X48"

P-BLK Black Plastic P-BLK 48"X48"

CLR Clear Plastic CLR 48"X48"

� Custom finishes are available as engineering special, consult customer service.

Available options � Specify B-NH for no mounting holes. (Not available on 8402. Available only with US32D, US32, US3, US4, US28, CLR, P-BLK only) � Specify B-NHA for no mounting holes with adhesive.

� Specify ERS prepped with extra row of screws.

� Special Cut-outs are available as engineering special, consult customer service.

Available accessory � Gasket tape kit tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation.

One tape pack will cover an the perimeters of a 8" x 34" kickplate. Order 8401 gasket tape.

Number of screw packs required by plate size (specify TEK Screws or TORK screws)

22”-25” 26”-33” 34”-41” 42”-48”

4”-8” 1 1 1 1

9”-16” 1 1 1 1

17”-24” 1 1 1 2

25”-32” 1 1 2 2

33”-40” 1 2 2 2

41”-48” 2 2 2 2 jbrooks Text Box Basis of Design

PHONE 877-671-7011

FAX 800-248-1460

www.allegion.com/us 4/15 009426

SEM 7850

MAGNET

Die cast housing, standard profile recessed wall mount.

NOTE: Outlet box not included.

SEM FEATURES

Tri-voltage design with 35 lbs. of holding force.

Now available armature extensions from LCN (see page 11).

SEM 7850 available in standard powder coat finishes.

SEM 7850 available in Aluminum and Dark Bronze finishes only.

Suitable for use in pocket door installations.

UL listed for smoke barrier or labeled fire doors.

SEM 7850

SEM SERIES

FE

AT

UR

ES

jbrooks Text Box Basis of Design

See Perimeter seals Accessories & options page for details.

www.zerointernational.com • Door sealing systems • Zero • 73

Perimeter seals

Finishes:

A Aluminum mill finish AA Aluminum clear anodized BK Aluminum black anodized D Aluminum dark bronze anodized G Aluminum gold anodized B Bronze, architectural mill finish B-ORB Oil-rubbed aged bronze

Options:

FLO Air flow/ sound block PSA Pressure-sensitive adhesive ZAG Ligature resistant gasketing S Order as a set SEC Security screws

Note:

A ppendix

S pecialty applications S ound control Intum escent W eatherstripping P erim eter seals

A utom atic door bottom s T hresholdsHead and jamb gasketing

Finishes:

A, BK,

D, G

Options:

S, SEC

ANSI/BHMA:

139A, 139BK, 139D, 139G R3C164

Finishes:

AA, BK, D, G,

B, B-ORB

Options:

S, SEC

ANSI/BHMA:

314AA, 314BK, 314D, 314G R3C164

314B R1C164

Finishes:

AA, BK,

D, G

Options:

ZAG, S,

SEC

ANSI/BHMA:

318AA, 318BK, 318D, 318G R3C164

ZAG option for mental health applications includes security screws.

Finishes:

A, BK,

D, G

Options:

S, SEC

ANSI/BHMA:

312A, 312BK, 312D, 312G R3C164

Finishes:

A, BK,

D, G

Options:

S, SEC

ANSI/BHMA:

140A, 140BK, 140D, 140G R3C164

Finishes:

A, BK,

D, G

Options:

S, SEC

ANSI/BHMA:

322A, 322BK, 322D, 322G R3C164

#6 x 1.00"(25.4) PPHSDS

1.250"(31.8)

.195" (5.0)

Closed cell sponge neoprene .125"(3.2) x 1.250"(31.8)

#6 x 1.00"(25.4) PPHSDS

.625"(15.9)

.219" (5.6)

Closed cell sponge neoprene .125"(3.2) x .500"(12.7)

#6 x 1.00"(25.4) PPHSDS

1.00"(25.4)

.219" (5.6)

Closed cell sponge neoprene .125"(3.2) x .750"(19.1)

#6 x 1.00"(25.4) PPHSDS

1.625"(41.2)

.430" (10.9)

Closed cell sponge neoprene .375"(9.5) x .750"(19.1)

#6 x 1.00"(25.4) PPHSDS

1.00"(25.4)

.408" (10.4)

Closed cell sponge neoprene .375"(9.5) x .750"(19.1)

#6 x 1.00"(25.4) PPHSDS

1.500"(38.1)

.437" (11.1)

Closed cell sponge neoprene .375"(9.5) x .750"(19.1) jbrooks Text Box Basis of Design www.zerointernational.com • Door sealing systems • Zero • 91

A ppendix

S pecialty applications S ound control Intum escent W eatherstripping P erim eter seals

A utom atic door bottom s T hresholds

PSA

188 8144

PSA

Zero offers a comprehensive selection of kerf seals and pressure-sensitive adhesive (PSA) rubber seals in a variety of materials.

With a broad portfolio, Zero offers solutions for a variety of challenging applications.

Zero’s unique profiles and versatile shapes deliver the best performance for common sealing challenges.

� Metal weatherstripping enables specifiers to optimize sealing solutions for a wide range of door and double-hung window applications.

� Glass door weatherstripping includes solutions for sliding and swinging glass doors.

Special features, such as state of the art adhesive, set Zero apart. Our PSA products are constructed using the highest-quality self-adhesives for superior adhesion even when the surface is contaminated with oil. Making them perfect for applications where budget or installation factors favor the use of PSA gasketing. Thoughtful engineering and design details include a subtle indentation in the extruded profile of Zero tear drop seals that enhances the wrap of the rubber for a tighter seal.

A variety of material options are available to customize a solution for the specific needs of your application.

� Silicone rubber can handle many applications including those with temperature extremes (S)

� Neoprene rubber a versatile material for heavy duty applications (N)

� Intumescent for fire and smoke protection (FS)

� BioWall rubber with anti-microbial inhibitor for infection control (BIO)

� EPDM rubber excellent for outdoor use (R)

� Vinyl Covered Foam (Q)

188 88108144

Designed for durability and optimal performance Weatherstripping Introduction

High quality self adhesive

� Strong initial adhesion

� Long term holding power

� Holds well even on contaminated surfaces

Most Zero weather-stripping products use best-in-class 3M 9495LE adhesive tape.

jbrooks Text Box Basis of Design

See Weatherstripping Accessories & options page for details.

102 • Zero • Door sealing systems • www.zerointernational.com

Weatherstripping

Options:

PSA Pressure-sensitive adhesive ZAG Ligature-resistant gasketing

A pp en di x S pe ci al ty ap pl ic at io ns S ou nd c on tr ol

In tu m es ce nt

W ea th er st ri pp in g P er im et er s ea ls A ut om at ic d oo r bo tt om s T hr es ho ld s

Finishes:

AA Aluminum clear anodized BK Aluminum black anodized D Aluminum dark bronze anodized G Aluminum gold anodized

PSA Weatherstripping for glass doors

Note:

PSA models use highest-quality foam-based, double-sided tape.

Glass door meeting stiles—surface mounted self-adhesive, both doors active

8192-PSA

Finishes:

AA, BK, D, G

ANSI/BHMA:

8192AA-PSA, 8192BK-PSA, 8192D-PSA, 8192G-PSA R3A735

Min door gap .375", max door gap 1"

98-PSA

Finishes:

A, BK, D, G

ANSI/BHMA:

98A-PSA, 98BK-PSA, 98D-PSA, 98G-PSA R3F735

Min door gap .250", max door gap .625"

8193-PSA

Finishes:

AA, BK, D, G

ANSI/BHMA:

8193AA-PSA, 8193BK-PSA, 8193D-PSA, 8193G-PSA R3A735

Min door gap .250", max door gap .700"

8194-PSA

Finishes:

AA, BK, D, G

ANSI/BHMA:

8194AA-PSA, 8194BK-PSA, 8194D-PSA, 8194G-PSA R3B735

Min door gap .250", max door gap .700"

8192 PSA

Nylon brush PSA

1.625"(41.3)

.300" (7.6)

8193 PSA

.220" (5.6)

.965"(24.5) .375" (9.5)

.590" (15.0)

Nylon brush PSA

8194 PSA

.220" (5.6)

.965"(24.5) .375" (9.5)

.590" (15.0)

Neoprene lip PSA

98 PSA

1.313"(33.4)

.394" (10.0)

Pile with fin PSA jbrooks Text Box Basis of Design

E10 Copyright © 2012, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

800-458-2424 www.rockwoodmfg.com

D O

O R G

U A

R D

S

S

IL

EN

C

ER

S

Door Silencers No. 608, 609

Material: DuraFlex gray rubber.

Other: Sold in packages of 100.

No. Size Frame Type Weight ANSI A156.16

608 1⁄2" dia. x 5⁄8" Metal 1.3 lbs./500 L03011

609 3⁄8" x 3⁄4" Wood 1.3 lbs./500 L03021

Door Silencer No. 608CA

Material: Clear rubber.

Other: Sold in packages of 300.

Features: Self-adhesive mounting.

No. Fastener Size Weight

608CA 3⁄8" dia. x 1⁄8" Metal or wood 0.2 lbs./300

Wall Guard No. 606

Material: Clear rubber.

Other: Sold in sheets of 55 .

Features: Self-adhesive mounting.

No. Fastener Size Weight

606 Self-adhesive back 1" x 1" 0.4 lbs./55

Privacy Door Latch No. PDL (formerly 607)

Material: Zinc die cast.

Finishes: BRS, DBRS, STNN, CRM, DCRM, ORB.

Features: • ADA compliant.

• Enhanced in room privacy.

• Easy to install.

• For use with UL Classified fire doors for use with hollow metal steel composite type fire doors rated up to and including 3 hrs.

Wood composite type fire doors rated up to and including 11⁄2 hrs and 20 minutes without hose stream.

No. Fastener Size Weight

PDL #12 x 11⁄4" FH SMS 11⁄2" x 213 ⁄16" 0.75 lbs.

Updated November 2013 jbrooks Text Box Basis of Design

E12

A H in ge s p iv ot s

B Pu lls pl at es C

Fl us h bo lt s & c oo rd in at or s D

La tc he s, c at ch es b ol ts

E1

St op s F

Ex te rio r h ar dw ar e

G M is ce lla ne ou s h ar dw ar e

Wall bumpers

WS406CVX & WS407CVX

WS406/407CVX (Convex) wall bumpers WS406/407CCV (Concave) wall bumpers � Constructed in sturdy yet economical wrought base of brass or stainless steel construction � Feature concealed tamper-proof mounting � Shipped factory preassembled backplate to reduce installation cost � Easy installation by inserting screwdriver through small hole in rubber � WS406/407CVX – convex rubber bumper, packed with fasteners for drywall/wood applications � WS406/407CCV – concave rubber bumper which avoids damage to locks with projecting buttons, packed with fasteners for drywall/wood applications

Certifications � WS406/407CVX Meets ANSI/BHMA 156.16, L22201 for brass and L52201 for stainless steel � WS406/407CCV Meets ANSI/BHMA 156.16, L22251 for brass and L52251 for stainless steel

Material substrate � Made from brass and stainless steel

Dimensions � Base diameter: 2-1/2" � Base thickness: 3/8" � Overall projection: 1"

Finishes - Brass BHMA Description Substrate Finish

605 Bright brass Brass US3 606 Satin brass Brass US4 609 Blackened brass Brass US5 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 622 Matte black Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D --- Aged bronze Brass 643e/716

Finishes - Stainless steel BHMA Description Substrate Finish

630 Stainless steel Stainless steel US32D For other colors, consult factory.

411R-W Wall bumper - adhesive � Adhesive-backed wall door stop for use on clean, smooth, flat surfaces only � Non-marring white rubber � Concave design permits knob to strike stop without damaging or engaging lock mechanism

Material substrate � Made from rubber

Dimensions � Base diameter: 1-7/8" � Base thickness: 3/8" � Overall projection: 1-1/16"

Finishes BHMA Description Substrate Finish

--- White Rubber R-W jbrooks Text Box Basis of Design