08 36 16 Sliding Door and Frames - Rev 1.pdf
PDF 273 KB Posted
- Solicitation number
- 36C24221B0053
About this file
This document package includes a project specification for sliding doors and frames and a related federal contract opportunity notice.
The project specification outlines technical requirements for interior sliding aluminum-framed doors to be installed as part of a renovation of the 2nd floor of the VA Community Based Outpatient Clinic in Rome, New York. The specification addresses door and frame materials, performance criteria including sound transmission ratings, submittal requirements, manufacturer qualifications, and installation instructions. It provides the project number and details for the VA renovation to construct a new primary care clinic in approximately 25,000 square feet of existing space.
The related federal contract opportunity is a pre-solicitation notice for the Rome CBOC 2nd floor renovation project. It indicates the solicitation number, project name, opportunity type, small business standards, and that the VA will issue an Invitation for Bid on or around July 22, 2021 via SAM.gov. The estimated value of the construction project is between $5-10 million.
Both documents pertain to the renovation of the 2nd floor of the VA CBOC in Rome, New York to create a new primary care clinic in line with PACT guidelines, involving the installation of interior sliding aluminum doors.
View the file
Other files
Show 40 more
Latest 50 of 84 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Department of Veterans Affairs Project #528A7-20-705 Renovate 2nd Floor Rome CBOC for PACT Bid Documents Rome, New York August 6, 2021
Revision 1 October 31, 2021
08 36 16 - 1
SECTION 08 36 16
SLIDING DOOR AND FRAMES
PART 1 - GENERAL
1.1 SUMMARY
A. Sliding Doors - flush wood panel, aluminum frames and related hardware.
1.2 RELATED WORK
A. Flush Wood Door: Section 08 14 00, INTERIOR WOOD DOORS.
B. Hardware: Section 08 71 00, DOOR HARDWARE.
C. Finishes: Section 09 06 00, SCHEDULE FOR FINISHES.
1.3 SUBMITTALS
A. Submittal Procedures: Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES.
B. Submittal Drawings:
1. Show size, configuration, and fabrication and installation details.
2. Indicate project specific requirements not included in
Manufacturer's Literature and Data submittal.
C. Manufacturer's Literature and Data:
1. Description of each product.
2. Acoustical test data of door system.
D. Samples: Submit manufacturer’s samples of the following sliding door components:
1. Door veneer sample.
E. Warranty Documentation: Submit manufacturer’s standard warranty.
1.4 QUALITY ASSURANCE
A. Product Options: Drawings indicate size, profiles, and dimensional requirements of interior aluminum frames and doors.
B. Source: Obtain sliding aluminum framed door system including frame, hardware and wood veneer acoustical door panel from single source.
Multiple sourced component assembly will not be accepted. Wood door panel to be provide by sliding door and frame system manufacturer.
C. Manufacturer’s Qualifications: Manufacturer regularly engaged for past
5 years in manufacture of sliding doors similar to that specified.
D. Installer shall be trained and certified by the manufacturer of the sliding door system to install their product for this project and submit the letter of certification for the training.
1.5 APPLICABLE PUBLICATIONS
A. Comply with references o extent specified in this section.
08 36 16 - 2
B. Accessibility
1. American Barriers Act Accessibility Standards
2. VA Barrier Free Design Standard
C. American National Standards Institute (ANSI):
1. ANSI/BHMA A156.18-2020 – Materials and Finishes
2. ICC A117.1-2017 – Accessible and Usable Buildings and Facilities
D. Builders Hardware Manufacturers Association (BHMA)
E. Door and Hardware Institute (DHI)
F. Architectural Woodwork Standards (AWS)
1.6 PERFORMANCE
A. Aluminum perimeter frames with integral acoustic seals.
B. Soft self-closing mechanism integrated with top track.
C. Concealed door guide.
D. Sound transmission ratings for complete door assembly shall STC-50.
1.7 DELIVERY STORAGE AND PROTECTION
A. Delivery and Acceptance Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.
B. Notify manufacturer immediately of any shipping damage.
C. Storage and Handling Requirements;
1. Store and handle materials in accordance with manufacturer’s instructions.
2. Keep materials in manufacturer’s original, unopened containers and packaging until installation.
3. Store materials in clean, dry area indoors.
4. Protect materials and finish during storage, handling, and installation to prevent damage.
1.7 WARRANTY
A. Construction Warranty: FAR clause 52.246-21, "Warranty of
Construction."
PART 2 - PRODUCTS
2.1 MANUFACTURER
A. Basis of Design
AD Systems
2201 100th Street, SW
Everett, WA 98204
08 36 16 - 3
855-328-6011 www.specADsystems.com
B. Products of equal quality meeting performance requirements set forth in the construction documents may submit for review.
2.2 INTERIOR SLIDING ALUMINUM-FRAMED DOORS
A. Interior Aluminum-Framed Top-Hung Sliding Doors: Indicated as BD.
B. Specified Wall thickness: As indicated on the drawings.
C. Frame Profiles: Extruded aluminum frame “wrap” frame with integral vertical jamb (stile pocket).
1. Finish:
a. Standard: Painted Hardcoat (Kynar) Finish. Meets AAMA 2604
Standard Colors: Light Sequin 789G048
D. Door Leafs. All Doors to be factory machined for hardware including pilot and function holes.
1. 1-3/4” Flush Wood Door: Reference Specification Section 08 14 00
Interior Wood Doors.
E. Door Components:
1. Single Top Track: Extruded aluminum track by door manufacturer.
2. Valances: Extruded aluminum with integral and caps.
a. Standard square valance.
3. Top Rollers: Tandem nylon roller sized to match door weight.
4. Concealed Floor Guide: Integral Jam floor guide by door manufacturer.
5. Soft-Closer: Soft and self-closing damper mechanism at [one] or
[both] sides of door leaf.
6. Handles:
a. Ladder Pull: 16” long x 1” diameter. Finish: US32D Satin
Stainless Steel.
7. Integral acoustical seals: Head, jambs and door bottom.
F. Hardware Sets:
1. HW-R-1:
a. 16” Ladder Pull with automatic door bottom.
b. Electrified lock or magnetic lock.
c. 1 power supply regulated, filtered 24 YDC amperage as required.
b. Lock keyed from the Teamlet side.
d.c. Automatic door bottom.
08 36 16 - 4 e.d. Gasketing f.e. Acoustic bottom track
g. 120 VAC power, conduit and wiring by Division 26.
h. Card reader by Division 28.
2. HW-R-2A:
a. Ladder pull 16” long x 1” diameter.
b. Finish US32D satin stainless steel.
c. ABA/ADA thumb turn inside with occupancy indicator/custodial over ride outside.
d. Finish US32D.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine wall openings to receive sliding doors for plumb, level, and square. Note: Finish door operation will be affected by out of tolerance framing.
B. Verify dimensions of wall openings.
C. Examine surfaces to receive top and bottom guide.
D. Notify Architect of conditions that would adversely affect installation or subsequent use of sliding doors.
E. Do not begin installation until unacceptable conditions are corrected.
F. Base of door side to be flush or minimal. Rubber Base acceptable.
3.2 INSTALLATION
A. Install sliding doors in accordance with manufacturer’s instructions at locations indicated on the Drawings.
B. Install sliding doors plumb, level, square, and in proper alignment.
C. Install sliding doors to close against walls without gaps
D. Install sliding doors to open and close smoothly.
E. Anchor sliding doors securely in place to supports. Required: Fire treated 2 x 6 blocking required full length of track.
3.3 ADJUSTING
A. Adjust sliding doors for proper operation in accordance with manufacturer’s instructions.
B. Adjust sliding doors to operate smoothly without binding.
C. Repair minor damages to finish in accordance with manufacturer’s instructions and as approved by Architect.
08 36 16 - 5
3.4 CLEANING
A. Clean sliding doors promptly after installation in accordance with manufacturer’s instructions.
B. Do not use harsh cleaning materials or methods that could damage materials or finish.
3.5 PROTECTION
A. Protect installed sliding doors from damage during construction.
- - - E N D - - -
File details come from the government source that posted it. Updated .