B09_A6_Attach_28_Concessioner_Foodservice_Drawings_(NIC__for_reference_only)_0006.pdf

PDF 8 MB Posted

Attached to
Correct Critical Safety Hazards and Rehabilitate t
Solicitation number
140P2022R0017
Issued by

About this file

Written by GovTribe AI ·

This is a solicitation for a construction project to correct critical safety hazards and rehabilitate the Ahwahnee Hotel National Historic Landmark in Yosemite National Park. The project includes seismic strengthening of the hotel building. The solicitation was issued by the National Park Service National Office. Responses are due by June 15, 2022. The awarded contract will require the correction of critical safety hazards, rehabilitation of the historic structure, and seismic strengthening work at the Ahwahnee Hotel located within Yosemite National Park in California.

View the file

Other files

File Type Posted
Sol_140P2022R0017_Amd_0010.pdf PDF
B09_A9_QA_for_Amendment_No__9_0610_2022_0009.pdf PDF
Sol_140P2022R0017_Amd_0009.pdf PDF
Sol_140P2022R0017_Amd_0008.pdf PDF
B09_A7_140P2022R0017_0007.pdf PDF
Sol_140P2022R0017_Amd_0007.pdf PDF
B09_A6_140P2022R0017_0006.pdf PDF
B09_A6_Attach_26_Revised_Drawings_0006.zip ZIP file
B09_A6_Attach_27_Revised_Specs_0006.zip ZIP file
B09_A6_Attach_25_QA_0603_2022_0006.pdf PDF
B09_A6_attach_29_AHW_Addendum_3_West_Loggia_Photos_0006.pdf PDF
Sol_140P2022R0017_Amd_0006.pdf PDF
Sol_140P2022R0017_Amd_0005.pdf PDF
B09_A5_Attach_25_Q_Ar1_0005.pdf PDF
B09_A5_140P2022R0017_0005.pdf PDF
B09_A4_Attach_25_Q_Ar1_0004.pdf PDF
Sol_140P2022R0017_Amd_0004.pdf PDF
B09_A3_Attach_24_Revised_Specifications_0003.zip ZIP file
B09_A3_Attach_22_Pre-Proposal_Meeting_Minutes_4-27-22_0003.pdf PDF
B09_A3_Attach_21_Pre-Proposal_Attendance_Sheet_0003.pdf PDF
B09_A3_Attach_23_Revised_Drawings_0003.zip ZIP file
B09_A3_Attach_25_Q_A_0003.pdf PDF
Sol_140P2022R0017_Amd_0003.pdf PDF
B09_A3_Attach_10_ContractPriceSchedule_blank_rev05-05-2022_0003.xlsx XLSX spreadsheet
B09_A3_140P2022R0017_0003.pdf PDF
B09_A2_140P2022R0017_0002.pdf PDF
Sol_140P2022R0017_Amd_0002.pdf PDF
B09_A2_Attachment_11_Ahwahnee_Seismic_Schedule_Outline_rev_4_14_22_0002.docx DOCX document
B09_A1_Attach_12_15061_88_AHW_SEISMIC_Submittal-List_01-14-2022_0001.pdf PDF
B09_A1_Attach_2d_YOSE_154910B_AHW_SEISMIC-FINAL_CD_SET_03-30-22_0001.pdf PDF
B09_A1_Attach_2b_YOSE_154910B_AHW_SEISMIC-FINAL_CD_SET_03-30-22_0001.pdf PDF
B09_A1_Attach_14d_Ahwahnee_HSR_Final_Submittal_-_Report_0001.pdf PDF
B09_A1_Attach_14a_Ahwahnee_HSR_Final_Submittal_-_Report_0001.pdf PDF
B09_A1_Attach_2a_YOSE_154910B_AHW_SEISMIC-FINAL_CD_SET_03-30-22__0001.pdf PDF
Sol_140P2022R0017_Amd_0001.pdf PDF
B09_A1_Attach_1_YOSE_154910B_AHW_SEISMIC-FINAL_CD_SPECS_03-30-22_0001.pdf PDF
B09_Amendment_1_140P2022R0017_0001.pdf PDF
B09_A1_Attach_13_Ahwahnee_CLR_2011_0001.pdf PDF
B09_A1_Attach_14b_Ahwahnee_HSR_Final_Submittal_-_Report_0001.pdf PDF
B09_A1_Attach_17_Geotechnical_Report_Ahwahnee_Hotel_FINAL_0001.pdf PDF
B09_A1_Attach_20_REFERENCE_AHW_TEMP_KITCHEN-FINAL_CD_SET_01-14-2022_0001.pdf PDF
B09_A1_Attach_15_Ahwahnee_HSR_Final_Submittal_-_Appendices_Vol_2_0001.pdf PDF
B09_A1_Attach_18_Seismic_Eval_Degenkolb_05_10_10_0001.PDF PDF
B09_A1_Attach_16_Asbestos_rpt-kitchen_crawl_space_soil_(1)_0001.pdf PDF
B09_A1_Attach_19_REFERENCE__AHW_TEMP_KITCHEN-FINAL_CD_SPECS_01-14-2022_0001.pdf PDF
B09_A1_Attach_10_AHW_Seismic_ContractPriceSchedule_Rev_1__0001.xlsx XLSX spreadsheet
B09_A1_Attach_2c_YOSE_154910B_AHW_SEISMIC-FINAL_CD_SET_03-30-22_0001.pdf PDF
B09_A1_Attach_14c_Ahwahnee_HSR_Final_Submittal_-_Report_0001.pdf PDF
B08_Attach_5_Certification_of_Vaccination_Form_Exp220228.pdf PDF
B08_Attach_9_SubKPlanForm_REQD.doc DOC document
Show 40 more

Latest 50 of 64 listed here. See the rest on GovTribe.

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CAN AND CART WASH AREA

WITH 1" DEPRESSED SLAB

120119 118 115

8385838399

10289

131 130 130112 133133

90 102

127 138

3 3

CHEF'S TABLE

FREEZER

BEVERAGES

EXPEDITER

BULK COOKING

BAKERY

REFRIGERATED

MEAT CUTTING

AGING

COOLER

MEAT COOLER

SANDWICH ASSEMBLY

PRODUCE PREP

CLEAN WARES

DISH DROP

ICE

BAKERY COOLER

WARE WASHING

PANTRY

PICKUP

EMPLOYEE DINING

CASHIER

128116

139 138

169 169

17 17 18

114 123

114 114

128 121 117 122

106 101 106

109 104

19 127

127 127

OFFICE

182 183 73 185187

179178

179178

105 105

16 16

ROOM

SERVICE

191 191

175 7776

87 141 142

89 89

REMOTE

CONDENSERS

VERIFY

LOCATIONS

16 16

165 165

129 132

105 105

BTC BRANCH TO CONNECTION

WHERE INDICATED TO CONNECT IN OR THROUGH A VALVE COMPARTMENT,

ON ROUGH-IN PLAN, CAP HIS WORK AND MAKE FINAL CONNECTIONS AFTER

TERMINATE ALL CONNECTIONS FOR THE EQUIPMENT IN THE LOCATIONS

INDICATED IN THE EQUIPMENT SCHEDULE AND ROUGH-IN DRAWINGS.

ALL ITEMS SHOWN WITH THE D.R. CONNECTIONS PLUG INTO RECEPTACLES

WHERE ELECTRICAL WIRING IS INDICATED AS TERMINATING IN A BREAKER

AND EQUIPMENT, A SUITABLY SIZED AND ENGINEERED INTERNAL CIRCUIT

BREAKER PANEL COMPLETE WITH PROPERLY SIZED CIRCUIT BREAKERS.

ELECTRICAL, PLUMBING AND MECHANICAL CONTRACTORS TO PROVIDE ALL

ALL CONNECTIONS SHOWN IN THE EQUIPMENT SCHEDULE ARE SIZED AS A TYPICAL

CONTRACTOR SHALL STUB-UP INTO VALVE COMPARTMENT AT HEIGHT INDICATED

WHEN EQUIPMENT IS NOTED AS EXISTING, UTILITY REQUIREMENTS SHOULD MATCH

THE INTENT OF THE DRAWINGS AND SPECIFICATIONS REGARDING ELECTRICAL

PRE-WIRING AND PLUMBING PRE-PIPING IS TO HAVE THE K.E.C. EXTEND TO AND

PANEL LOCATED IN AN EQUIPMENT ITEM, IT SHALL BE THE K.E.C.'s RESPONSIBILITY

TO FURNISH AND INSTALL, COMPLETELY PRE-WIRED TO FIXTURE COMPONENTS

ROUGH-IN BUILDING SERVICES AND MAKE FINAL CONNECTIONS TO ALL FOOD SERVICE

MOBILE

MILLWORK

MAKE-UP AIR

MIXED WATER

CONTRACT

OVERALL

PLUG-IN

PULL STATION

QUANTITY

STEAM SUPPLY

TELEPHONE

TEMPERATURE

WATER GAUGE

WATER PROOF

WEIGHT

SWITCH

NOT IN KITCHEN EQUIPMENT

PLUMBING CONTRACTOR

PLASTIC LAMINATE

POUNDS PER SQUARE INCH

QUICK DISCONNECT

STATIC PRESSURE

STAINLESS STEEL

TEMPERATURE DROP

VALVE COMPARTMENT

1000 BTU PER HOUR

QTY

FPM FEET PER MINUTE

FOOD SERVICE EQUIPMENT

FIRE SUPPRESSION SYSTEM

GENERAL CONTRACTOR

GALLONS PER MINUTE

GREASE TRAP

HORSEPOWER

INDIRECT WASTE

JUNCTION BOX STUB-UP LOCATION

KITCHEN EQUIPMENT CONTRACTOR

I.W.

LBS

JB

KW

K.E.C.

POUNDS

KILOWATTS

GPM

HP

HW

FSE

FSS

GC

G

HOT WATER

GAS

VC

WT

W

WG

WP

WASTE

TD

TEL

TEMP

V

SS

SP

S/S

SW

VOLTS

ABBREVIATIONS

THE FOLLOWING ABBREVIATIONS ARE THOSE USED

ON THE FOOD SERVICE EQUIPMENT PLANS AND SCHEDULES.

ABOVE FINISHED FLOOR

CUBIC FEET PER MINUTE

CONTROL PANEL

CONNECTION

CONDENSATE RETURN

COLD WATER

DUPLEX RECEPTACLE

ELECTRICAL CONTRACTOR

FABRICATOR

FLOOR DRAIN

DEDICATED CIRCUIT/ISOLATED GROUND

DUPLEX CONVENIENCE OUTLET (20amp)

DOWN FROM CEILING TO HEIGHT AFF

DC/IG

EC

FAB

FD

FS

DCO

DN +

DR

FLOOR SINK

CFM

C.P.

C.R.

CW

CONN.

AFF

A AMPERES

EQUIPMENT.

8.

7.

OA

PL

PS

PSI

QD

PC

PH

P.I.

PHASE

N.I.K.E.C.

MILL

MUA

M

MBTU

EQUIPMENT IS IN PLACE.

REQUIREMENTS SHOWN ARE FOR ONE UNIT. TO DETERMINE TOTAL

REQUIREMENTS, MULTIPLY BY NUMBER IN QUANTITY COLUMN.

REQUIREMENT FOR THE EQUIPMENT AND THE FACILITY'S PURPOSE.

EXISTING AS INDICATED ON THE MANUFACTURER'S DATA PLATE.

FURNISHED BY THE K.E.C. AS PART OF THE EQUIPMENT.

6.

5.

4.

3.

NOTES:

1.

2.

CONTRACTOR SHALL VERIFY PRIOR TO RECONNECTION

SOME SIZES WILL BE STATED IN UTILITY SCHEDULE DIFFERENT THAN THE EQUIPMENT'S

FACTORY CONNETIONS. G.C. SHALL ROUGH-IN PER FOODSERVICE PLANS.

BTU BRITISH THERMAL UNITS

MW

4743 E. FOOTHILL DR.

PARADISE VALLEY, AZ. 85253

602-377-7290

Project No

Date:

Sheet:

A

B

C

D

E

F

G

H

J

K

L

A

2 13456789101112131415

2 13456789101112131415

Concessioner:

Aramark, Leisure

DBA: Yosemite Hospitality in partnership with

The National Park Service

FS-1

Equipment Plan

0515-0180.02

YOSEMITE NATIONAL PARK

JANUARY 5, 2018

DESIGN DEVELOPMENT

Number Revision Description Date

THE MAJESTIC HOTEL

KITCHEN FLOOR REPLACEMENT

SCALE:

" = 1'-0"

AutoCAD SHX Text D

AutoCAD SHX Text D

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text

AIR OUT

AutoCAD SHX Text 21x54

AutoCAD SHX Text 21x60

AutoCAD SHX Text 21x30

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x30

AutoCAD SHX Text 21x30

AutoCAD SHX Text 21x60

AutoCAD SHX Text 21x30

AutoCAD SHX Text 21x72

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x36

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x72

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x48

AutoCAD SHX Text 21x60

AutoCAD SHX Text 24x60

AutoCAD SHX Text 24 X 36

AutoCAD SHX Text 24 X 60

AutoCAD SHX Text 24 X 60

AutoCAD SHX Text 24 X 36

AutoCAD SHX Text 24 X 36

AutoCAD SHX Text 24 X 60

AutoCAD SHX Text 24 X 60

AutoCAD SHX Text 24x60

AutoCAD SHX Text 21x60

AutoCAD SHX Text 21x60

AutoCAD SHX Text 21x60

AutoCAD SHX Text 21x48

AutoCAD SHX Text

AutoCAD SHX Text

FS7.3

AutoCAD SHX Text

AutoCAD SHX Text

FS7.3

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.5

AutoCAD SHX Text

AutoCAD SHX Text

FS7.2

AutoCAD SHX Text

AutoCAD SHX Text

FS7.5

AutoCAD SHX Text

AutoCAD SHX Text

FS7.3

AutoCAD SHX Text

AutoCAD SHX Text

FS7.1

AutoCAD SHX Text

AutoCAD SHX Text

FS-7

AutoCAD SHX Text

AutoCAD SHX Text

FS7.1

AutoCAD SHX Text

AutoCAD SHX Text

FS7.2

AutoCAD SHX Text

AutoCAD SHX Text

FS7.3

AutoCAD SHX Text

AutoCAD SHX Text

FS-7

AutoCAD SHX Text

AutoCAD SHX Text

FS7.5

AutoCAD SHX Text

AutoCAD SHX Text

FS-7

AutoCAD SHX Text

AutoCAD SHX Text

FS7.2

AutoCAD SHX Text

AutoCAD SHX Text

FS7.3

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.3

AutoCAD SHX Text

AutoCAD SHX Text

FS7.1

AutoCAD SHX Text

AutoCAD SHX Text

FS7.2

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.5

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.4

AutoCAD SHX Text

AutoCAD SHX Text

FS7.2

AutoCAD SHX Text

SEE ELECTRICAL PLAN FOR LOAD AND DETAIL REQUIREMENTS

AutoCAD SHX Text

UNDER BAR TOP LIGHTING BY GENERAL CONTRACTOR REQUIRED.

AutoCAD SHX Text

ALL KITCHEN EQUIPMENT (EXCLUDING HAND SINKS) TO RECEIVE

AutoCAD SHX Text

SANITATION FOUNDATION (NSF) STANDARDS OR EQUIVALENT.

AutoCAD SHX Text

WALLS AND CEILING IN KITCHEN AREAS TO BE LIGHT COLORED,

AutoCAD SHX Text

A MINIMUM OF 140%%D HOT WATER AT FIXTURE

AutoCAD SHX Text

COLORED.

AutoCAD SHX Text

HEALTH DEPARTMENT NOTES

AutoCAD SHX Text

ALL EQUIPMENT AND INSTALLATION TO MEET NATIONAL

AutoCAD SHX Text

SMOOTH, NONABSORBENT AND EASILY CLEANABLE.

AutoCAD SHX Text

FLOORS AND BASE IN KITCHEN AREAS TO BE LIGHT

AutoCAD SHX Text 4.

AutoCAD SHX Text 5.

AutoCAD SHX Text 1.

AutoCAD SHX Text 3.

AutoCAD SHX Text 2.

AutoCAD SHX Text

SPECIFIED BY MECHANICAL ENGINEER AND PROVIDE BY G.C.

AutoCAD SHX Text

ALL CARBONATORS REQUIRE A BACK-FLOW PREVENTION DEVICE

AutoCAD SHX Text 6.

AutoCAD SHX Text

GT

BTC BRANCH TO CONNECTION

WHERE INDICATED TO CONNECT IN OR THROUGH A VALVE COMPARTMENT,

ON ROUGH-IN PLAN, CAP HIS WORK AND MAKE FINAL CONNECTIONS AFTER

TERMINATE ALL CONNECTIONS FOR THE EQUIPMENT IN THE LOCATIONS

INDICATED IN THE EQUIPMENT SCHEDULE AND ROUGH-IN DRAWINGS.

ALL ITEMS SHOWN WITH THE D.R. CONNECTIONS PLUG INTO RECEPTACLES

WHERE ELECTRICAL WIRING IS INDICATED AS TERMINATING IN A BREAKER

AND EQUIPMENT, A SUITABLY SIZED AND ENGINEERED INTERNAL CIRCUIT

BREAKER PANEL COMPLETE WITH PROPERLY SIZED CIRCUIT BREAKERS.

ELECTRICAL, PLUMBING AND MECHANICAL CONTRACTORS TO PROVIDE ALL

ALL CONNECTIONS SHOWN IN THE EQUIPMENT SCHEDULE ARE SIZED AS A TYPICAL

CONTRACTOR SHALL STUB-UP INTO VALVE COMPARTMENT AT HEIGHT INDICATED

WHEN EQUIPMENT IS NOTED AS EXISTING, UTILITY REQUIREMENTS SHOULD MATCH

THE INTENT OF THE DRAWINGS AND SPECIFICATIONS REGARDING ELECTRICAL

PRE-WIRING AND PLUMBING PRE-PIPING IS TO HAVE THE K.E.C. EXTEND TO AND

PANEL LOCATED IN AN EQUIPMENT ITEM, IT SHALL BE THE K.E.C.'s RESPONSIBILITY

TO FURNISH AND INSTALL, COMPLETELY PRE-WIRED TO FIXTURE COMPONENTS

ROUGH-IN BUILDING SERVICES AND MAKE FINAL CONNECTIONS TO ALL FOOD SERVICE

MOBILE

MILLWORK

MAKE-UP AIR

MIXED WATER

CONTRACT

OVERALL

PLUG-IN

PULL STATION

QUANTITY

STEAM SUPPLY

TELEPHONE

TEMPERATURE

WATER GAUGE

WATER PROOF

WEIGHT

SWITCH

NOT IN KITCHEN EQUIPMENT

PLUMBING CONTRACTOR

PLASTIC LAMINATE

POUNDS PER SQUARE INCH

QUICK DISCONNECT

STATIC PRESSURE

STAINLESS STEEL

TEMPERATURE DROP

VALVE COMPARTMENT

1000 BTU PER HOUR

QTY

FPM FEET PER MINUTE

FOOD SERVICE EQUIPMENT

FIRE SUPPRESSION SYSTEM

GENERAL CONTRACTOR

GALLONS PER MINUTE

GREASE TRAP

HORSEPOWER

INDIRECT WASTE

JUNCTION BOX STUB-UP LOCATION

KITCHEN EQUIPMENT CONTRACTOR

I.W.

LBS

JB

KW

K.E.C.

POUNDS

KILOWATTS

GPM

HP

HW

FSE

FSS

GC

G

HOT WATER

GAS

VC

WT

W

WG

WP

WASTE

TD

TEL

TEMP

V

SS

SP

S/S

SW

VOLTS

ABBREVIATIONS

THE FOLLOWING ABBREVIATIONS ARE THOSE USED

ON THE FOOD SERVICE EQUIPMENT PLANS AND SCHEDULES.

ABOVE FINISHED FLOOR

CUBIC FEET PER MINUTE

CONTROL PANEL

CONNECTION

CONDENSATE RETURN

COLD WATER

DUPLEX RECEPTACLE

ELECTRICAL CONTRACTOR

FABRICATOR

FLOOR DRAIN

DEDICATED CIRCUIT/ISOLATED GROUND

DUPLEX CONVENIENCE OUTLET (20amp)

DOWN FROM CEILING TO HEIGHT AFF

DC/IG

EC

FAB

FD

FS

DCO

DN +

DR

FLOOR SINK

CFM

C.P.

C.R.

CW

CONN.

AFF

A AMPERES

EQUIPMENT.

8.

7.

OA

PL

PS

PSI

QD

PC

PH

P.I.

PHASE

N.I.K.E.C.

MILL

MUA

M

MBTU

EQUIPMENT IS IN PLACE.

REQUIREMENTS SHOWN ARE FOR ONE UNIT. TO DETERMINE TOTAL

REQUIREMENTS, MULTIPLY BY NUMBER IN QUANTITY COLUMN.

REQUIREMENT FOR THE EQUIPMENT AND THE FACILITY'S PURPOSE.

EXISTING AS INDICATED ON THE MANUFACTURER'S DATA PLATE.

FURNISHED BY THE K.E.C. AS PART OF THE EQUIPMENT.

6.

5.

4.

3.

NOTES:

1.

2.

CONTRACTOR SHALL VERIFY PRIOR TO RECONNECTION

SOME SIZES WILL BE STATED IN UTILITY SCHEDULE DIFFERENT THAN THE EQUIPMENT'S

FACTORY CONNETIONS. G.C. SHALL ROUGH-IN PER FOODSERVICE PLANS.

BTU BRITISH THERMAL UNITS

MW

Project No

Date:

Sheet:

A

B

C

D

E

F

G

H

J

K

L

A

2 13456789101112131415

2 13456789101112131415

FS-1.1

NOTES

0515-0180.02

YOSEMITE NATIONAL PARK

JANUARY 5, 2018

DESIGN DEVELOPMENT

Number Revision Description Date

Concessioner:

Aramark, Leisure

DBA: Yosemite Hospitality in partnership with

The National Park Service

THE MAJESTIC HOTEL

KITCHEN FLOOR REPLACEMENT

AutoCAD SHX Text with 6 watts per lineal foot of drain line inside of walk-in

AutoCAD SHX Text gate valves, solenoid valves, siphon breakers, piping, tubing, AutoCAD SHX Text quality standards whether untreated or pretreated, based upon

AutoCAD SHX Text D. Chloride less than 30 parts per million7.5

AutoCAD SHX Text A. Total dissolved solids less than 60 parts per million

AutoCAD SHX Text B. Total alkalinity less than 20 parts per million

AutoCAD SHX Text C. Silica less than 13 parts per million

AutoCAD SHX Text

5. Plumbing Contractor to furnish and install the following

AutoCAD SHX Text A. All water, waste, gas, and steam service to point of

AutoCAD SHX Text rough-in as shown on plan. Rough-in outlets to stub 4" out of

AutoCAD SHX Text walls at height indicated from finished floor to center line

AutoCAD SHX Text B. Pressure reducing and/or regulating valves for

AutoCAD SHX Text dishwashers, booster heaters, and as otherwise noted, in

AutoCAD SHX Text C. All floor sinks, complete with top grates indicated, and

AutoCAD SHX Text removable sediment buckets set flush with finished floor, AutoCAD SHX Text D. All waste lines, direct or indirect, except as noted, AutoCAD SHX Text shall be pitched downward. All waste lines shall have adequate

AutoCAD SHX Text E. Indirect waste lines for walk-in refrigerators/freezers, AutoCAD SHX Text pitched 1/4" / 12" (minimum) and with a "P" trap at end over floor

AutoCAD SHX Text freezer compartment.

AutoCAD SHX Text F. Install in an accessible location the fire control gas

AutoCAD SHX Text shut-off valve as supplied by Kitchen Equipment Contractor.

AutoCAD SHX Text H. Insulation of all steam, hot water and condensate return

AutoCAD SHX Text I. Clean-out valves for steam condensate, and air lines.

AutoCAD SHX Text J. All piping to and from equipment shall be kept at a

AutoCAD SHX Text minimum of (6") above finished floor to allow for cleaning.

AutoCAD SHX Text all required materials to complete connections , such as stops, AutoCAD SHX Text valves, filters, check valves, pressure reducing valves, AutoCAD SHX Text

3. Water quality requirement. The recommended minimum water

AutoCAD SHX Text 5 hours of use per day, and a daily blow-down, are as

AutoCAD SHX Text

4. Verify all plumbing rough-ins and location with Owner, Vendor

AutoCAD SHX Text or G.C. on existing equipment or other equipment not provided

AutoCAD SHX Text (If gas cooking equipment is used).

AutoCAD SHX Text G. Vacuum breakers as required.

AutoCAD SHX Text unless noted or as per local code.

AutoCAD SHX Text

2. Plumbing Contractor to provide and install

AutoCAD SHX Text unless otherwise specified by

AutoCAD SHX Text lines in kitchen.

AutoCAD SHX Text clean-out provisions.

AutoCAD SHX Text sink as required by local code.

AutoCAD SHX Text

23. Electrical Contractor to provide and install heater tape

AutoCAD SHX Text kitchen areas.

AutoCAD SHX Text in accordance with applicable codes.

AutoCAD SHX Text of outlet.

AutoCAD SHX Text by K.E.C.

AutoCAD SHX Text follows:

AutoCAD SHX Text

PLUMBING CONTRACTOR NOTES

AutoCAD SHX Text misc. fittings, traps, etc.

AutoCAD SHX Text Frank Redmond Associates.

AutoCAD SHX Text

15. Hot water heater to provide a minimum of 140 degree to all

AutoCAD SHX Text

16. All dimensions shown are measured from finished walls, floors

AutoCAD SHX Text ceilings and/or column to center lines of stubs or outlets.

AutoCAD SHX Text The Plumbing Contractor shall make allowances for

AutoCAD SHX Text miscellaneous obstructions such as piping mains, electrical

AutoCAD SHX Text components, structures, venting and thickness of finishes when

AutoCAD SHX Text

17. All faucets and/or disposers located on Food Service Plan

AutoCAD SHX Text shall be provided by K.E.C. and installed by Plumbing

AutoCAD SHX Text

18. Hand sinks are to be mounted and installed by Plumbing

AutoCAD SHX Text

19. Plumbing Contractor to provide and install all backflow prevention devices

AutoCAD SHX Text required on equipment, in accordance with applicable codes.

AutoCAD SHX Text

20. Plumbing Contractor to provide and install cold water and drain at

AutoCAD SHX Text

21. Plumbing Contractor to provide and install insulated drain lines from all

AutoCAD SHX Text ice storage pans to prevent drain from sweating within fixture.

AutoCAD SHX Text evaporative coolers on roof.

AutoCAD SHX Text Contractor.

AutoCAD SHX Text kitchen equipment.

AutoCAD SHX Text roughing in.

AutoCAD SHX Text Contractor.

AutoCAD SHX Text

11. Where equipment is noted as existing, utility requirements

AutoCAD SHX Text utilities and equipment requirements and re-use if possible.

AutoCAD SHX Text K. In line water filters are recommended for the following

AutoCAD SHX Text equipment: (Water filter by K.E.C. only when noted)

AutoCAD SHX Text

6. Plumbing Contractor to interconnect dishmachine with booster

AutoCAD SHX Text heater and water-type ventilators with control panels as per

AutoCAD SHX Text manufacturer's instruction, when applicable and noted.

AutoCAD SHX Text

7. All lines routed through equipment shall not interfere with

AutoCAD SHX Text intended use of, or servicing of equipment.

AutoCAD SHX Text

8. All vent pipes are to be concealed in walls or column chases.

AutoCAD SHX Text

9. Interconnection between steam equipment and steam generator.

AutoCAD SHX Text

10. Grease interceptor to be specified and located by Mechanical Engineer.

AutoCAD SHX Text Provided and installed by Mechanical or Plumbing Contractor

AutoCAD SHX Text should be verified and match as indicated on manufacturer's

AutoCAD SHX Text data plate. If equipment is not relocated, reconnect as

AutoCAD SHX Text required by code. Plumbing Contractor to verify existing

AutoCAD SHX Text

12. All plumbing locations are shown at optimum spots. Utilize

AutoCAD SHX Text

13. All plumbing lines within fixtures, are to be run through

AutoCAD SHX Text bulkheads, raceways, and behind shelves wherever possible.

AutoCAD SHX Text

14. All plumbing to be concealed within walls where possible.

AutoCAD SHX Text all existing services where applicable.

AutoCAD SHX Text Glass Washers

AutoCAD SHX Text Soda Systems

AutoCAD SHX Text Ice Machines

AutoCAD SHX Text Steam Equipment

AutoCAD SHX Text Dish Washers

AutoCAD SHX Text Water Heaters

AutoCAD SHX Text Booster Heaters

AutoCAD SHX Text Sink Heaters

AutoCAD SHX Text furnished by the Kitchen Equipment Contractor. The

AutoCAD SHX Text and ordinances. Electrical Contractor to verify necessary

AutoCAD SHX Text electrical contractor shall supply and install pull boxes, AutoCAD SHX Text shall be furnished with an exterior pilot light switch by the

AutoCAD SHX Text Kitchen Equipment Contractor. It shall be the respon-

AutoCAD SHX Text Contractor unless specified in these plans or in writing.

AutoCAD SHX Text system for the cooking equipment, to shut off all equipment

AutoCAD SHX Text automatically in case of fire. Verify with local codes for

AutoCAD SHX Text

12. All 120 volt convenience outlets not designated with spec-

AutoCAD SHX Text ific loads are to be rated 20.0 amps. Electrical Contractor

AutoCAD SHX Text

13. Electrical Contractor to shorten any cords supplied with

AutoCAD SHX Text equipment if requested to do so by owner or Kitchen

AutoCAD SHX Text equipment provided by K.E.C. This shall include the instal-

AutoCAD SHX Text exhaust system fan(s) make-up air fan(s) and refrigeration

AutoCAD SHX Text system(s) as required. Low voltage (or common voltage)

AutoCAD SHX Text ical contractor when necessary to control and interconnect

AutoCAD SHX Text or grid lines to center lines of outlets and pull boxes.

AutoCAD SHX Text

14. Electrical Contractor to provide all rough-in building

AutoCAD SHX Text

15. Electrical Contractor to provide temporary power to Kitchen

AutoCAD SHX Text shut-down of exhaust fan(s) and or make-up air fan(s)

AutoCAD SHX Text is to provide any additional outlets as called for by

AutoCAD SHX Text services and make final connections to all food service

AutoCAD SHX Text lation mounting of the Air Curtain(s),Microswitch(s) and

AutoCAD SHX Text

5. Vapor proof light fixtures for walk-in coolers and freezers

AutoCAD SHX Text

6. Electrical Contractor to interconnect the Remote Refrige-

AutoCAD SHX Text

7. All electrical materials including wiring, flex, conduit, AutoCAD SHX Text

8. It shall be the responsibility of the Electrical Contractor

AutoCAD SHX Text

9. The Electrical Contractor shall furnish and install any and

AutoCAD SHX Text

10. All dimensions shown on these plans are measured from

AutoCAD SHX Text

11. The Electrical Contractor shall provide and install element

AutoCAD SHX Text to provide water proof power outlet(s) on the roof for

AutoCAD SHX Text wiring shall also be supplied and installed by the electr-

AutoCAD SHX Text all electrical contactors as required by applicable codes

AutoCAD SHX Text finished walls, floors, ceilings and/or column center lines

AutoCAD SHX Text The Electrical Contractor shall make allowances for finishes

AutoCAD SHX Text contactor (relay) shut-offs (shunt trip) and/or solenoid

AutoCAD SHX Text shut-off valve and interconnect with the fire suppression

AutoCAD SHX Text conduit, wire, bulbs, etc. Provide and connect to a wall

AutoCAD SHX Text mounted switch (with pilot light) located per plans.

AutoCAD SHX Text sibility of the Electrical Contractor to interconnect and

AutoCAD SHX Text install these items as required. Electrical Contractor

AutoCAD SHX Text shall Not interconnect lighting, door heaters,drain heat

AutoCAD SHX Text tape or relief ports with Evaporator .

AutoCAD SHX Text rations' Compressor, Evaporator, T-stat, Solenoid and

AutoCAD SHX Text switches, disconnects, magnetic starters, thermo-overload

AutoCAD SHX Text protectors, transformers, electrical panels, cords, plugs, AutoCAD SHX Text receptacles, bulbs, etc. shall be supplied by the Electrical

AutoCAD SHX Text requirements.

AutoCAD SHX Text Equipment Contractors' representative.

AutoCAD SHX Text Service Equipment Contractors' installers.

AutoCAD SHX Text Heat Lamp(s) as required.

AutoCAD SHX Text architect, owner and/or general contractor.

AutoCAD SHX Text when roughing-in.

AutoCAD SHX Text the above systems.

AutoCAD SHX Text Defrost Timer (All Controls) where required.

AutoCAD SHX Text plans are for food service equipment requirements only. It

AutoCAD SHX Text

1. The electrical rough-ins and connections shown on these

AutoCAD SHX Text consult the architect's, electrical engineers and/or other

AutoCAD SHX Text

2. Access areas and cut-outs on custom and manufactured

AutoCAD SHX Text Equipment Contractor fabricators and installers as required

AutoCAD SHX Text

3. The Electrical Contractor shall connect all compressors and

AutoCAD SHX Text is the responsibility of the Electrical Contractor to

AutoCAD SHX Text consultant's plans and the owner for further building

AutoCAD SHX Text equipment and fixtures shall be provided by the Kitchen

AutoCAD SHX Text for proper installation of electrical outlets, junction boxes, home

AutoCAD SHX Text runs, etc. The electrical contractor shall provide and

AutoCAD SHX Text install shields and extension boxes as required.

AutoCAD SHX Text provide fused disconnects, magnetic starters and thermal

AutoCAD SHX Text

4. Vapor proof light fixtures for exhaust hoods shall be

AutoCAD SHX Text electrical requirements.

AutoCAD SHX Text

ELECTRICAL CONTRACTOR NOTES

AutoCAD SHX Text overload protection as required.

AutoCAD SHX Text

16. All rough-ins are shown in optimum spots, utilize all

AutoCAD SHX Text

17. All receptacles and junction boxes to be flushed mounted in

AutoCAD SHX Text

19. Verify all electrical rough-ins and locations with Owner, AutoCAD SHX Text Vendor, or General Contractor on existing equipment or other

AutoCAD SHX Text

20. Where applicable, Electrical Contractor to provide conduit and

AutoCAD SHX Text wiring, electrical components, and inter-wiring between

AutoCAD SHX Text A. Control panels to ventilators and exhaust/supply

AutoCAD SHX Text fans per manufacture's instructions.

AutoCAD SHX Text B. Kitchen exhaust hood/ventilators to fire control

AutoCAD SHX Text C. Call lights and waitress control systems.

AutoCAD SHX Text D. Light fixture, chandeliers, etc. Lamps for any

AutoCAD SHX Text light fixtures are to be provided and installed by

AutoCAD SHX Text the Electrical Contractor unless indicated on the

AutoCAD SHX Text E. Modular counters and components installed herein.

AutoCAD SHX Text

21. Electrical Contractor to provide and install all light bulbs

AutoCAD SHX Text

22. Where connection is shown as J.B., Electrical Contractor shall

AutoCAD SHX Text connect to junction box furnished as part of the equipment.

AutoCAD SHX Text lighting schedules or drawings.

AutoCAD SHX Text for fixtures.

AutoCAD SHX Text existing services when applicable.

AutoCAD SHX Text walls with stainless steel cover plate.

AutoCAD SHX Text

18. All duplex outlets to be set horizontally.

AutoCAD SHX Text equipment not provided by K. E. C.

AutoCAD SHX Text the following:

AutoCAD SHX Text system and hood controls.

AutoCAD SHX Text

18. General Contractor to provide waste container at job site for

AutoCAD SHX Text K.E.C. unless otherwise noted by Frank Redmond Design Group.

AutoCAD SHX Text

15. When equipment is noted as existing or by vendor, utility

AutoCAD SHX Text requirements should match as indicated on the manufacture's data

AutoCAD SHX Text plate. If existing equipment is not relocated, reconnect as

AutoCAD SHX Text

16. Where indicated to connect in or through valve compartment, AutoCAD SHX Text contractor shall stub-up into valve compartment at height

AutoCAD SHX Text indicated on rough-in plan, cap their work and make final

AutoCAD SHX Text connections after equipment is in place.

AutoCAD SHX Text required in accordance with applicable codes.

AutoCAD SHX Text Sub-Contractor of the responsibility of complying with all

AutoCAD SHX Text

9. Sleeves to be provided by General Contractor in walls, floors

AutoCAD SHX Text center post for entry of equipment shall be the responsibility

AutoCAD SHX Text of the General Contractor and at no expense to K.E.C.

AutoCAD SHX Text

13. General Contractor to provide all wall backing per location

AutoCAD SHX Text and specification by Frank Redmond Design Group.

AutoCAD SHX Text

14. All dimensions shown are measured from finished walls, AutoCAD SHX Text floors, ceilings and/or column to center lines of stubs or

AutoCAD SHX Text outlets. Allowances shall be made for miscellaneous

AutoCAD SHX Text obstructions, structures, venting, electrical, plumbing and

AutoCAD SHX Text thickness of finishes when framing and/or roughing-in as

AutoCAD SHX Text required.

AutoCAD SHX Text and ceiling for lines (drains, refrigeration, etc.) to pass

AutoCAD SHX Text through and reseal after lines are run.

AutoCAD SHX Text

10. General Contractor to provide access to hoods at area above

AutoCAD SHX Text hoods for mounting of hood supports. If access is not

AutoCAD SHX Text provided, General Contractor to provide hood supports.

AutoCAD SHX Text

11. General Contractor to provide sprinkler heads in walk-in boxes

AutoCAD SHX Text adequately protected against freezing.

AutoCAD SHX Text

12. Removal of window glass, window frames, doors, door frames and

AutoCAD SHX Text notice of changes.

AutoCAD SHX Text

6. Last dated revisions void all previous plans.

AutoCAD SHX Text

7. General Contractor to provide floor recesses (flat and level), AutoCAD SHX Text vapor barriers and built in insulated floors (as shown on

AutoCAD SHX Text

8. Wearing floor finish and cove base in walk-in boxes

AutoCAD SHX Text to be provided by General Contractor unless otherwise

AutoCAD SHX Text plans).

AutoCAD SHX Text specified by K.E.C.

AutoCAD SHX Text applicable codes. Please see architect's drawings for all

AutoCAD SHX Text

5. It is the responsibility of the Owner, Architect and/or

AutoCAD SHX Text General Contractor to inform Frank Redmond Design Group

AutoCAD SHX Text in writing of any and all changes and all addendum's to plans

AutoCAD SHX Text which are made prior to and during construction. Frank

AutoCAD SHX Text Redmond Design Group assumes no responsibility for equipment

AutoCAD SHX Text deviations of size and/or utilities from lack of this

AutoCAD SHX Text information. The Owner will be responsible for all cost

AutoCAD SHX Text incurred by failure to give Frank Redmond Design Group

AutoCAD SHX Text other requirements and codes.

AutoCAD SHX Text public areas, provisions should be made by the General

AutoCAD SHX Text Contractor to "double stud" and sound proof common walls.

AutoCAD SHX Text

3. If cantilever brackets for table and stools seats or other

AutoCAD SHX Text equipment are specified, the brackets shall be provided by

AutoCAD SHX Text K.E.C. but installed by General Contractor in accordance

AutoCAD SHX Text with specification and dimensions provided by Frank Redmond

AutoCAD SHX Text

4. Frank Redmond Design Group plans are provided for the

AutoCAD SHX Text sole purpose of indicating outlet locations and equipment

AutoCAD SHX Text requirements only and do not relieve the General Contractor or

AutoCAD SHX Text Design Group.

AutoCAD SHX Text

1. General Contractor to cut and provide holes through ceiling, AutoCAD SHX Text roofs, walls and floors for ducts, etc. in accordance with

AutoCAD SHX Text local fire and building codes and in accordance with duct

AutoCAD SHX Text sizes specified. General Contractor to provide the resealing

AutoCAD SHX Text of all holes ( including the "mopping-in" of fan curbs and roof

AutoCAD SHX Text jacks.) General Contractor to provide all duct fire

AutoCAD SHX Text separation enclosures, wrappings, etc. as may be required by

AutoCAD SHX Text

2. Where noise or vibration producing equipment (dish machine, AutoCAD SHX Text disposer, etc. is located adjacent to dining areas and/or any

AutoCAD SHX Text local building and fire codes.

AutoCAD SHX Text

GENERAL CONTRACTOR NOTES:

AutoCAD SHX Text

19. General Contractor to provide all hand held fire extinguishers.

AutoCAD SHX Text exhaust hood(s) fire suppression system. Plumbing Contractor to install.

AutoCAD SHX Text

17. Kitchen Equipment Contractor to provide Gas Shut-off Solenoid Valve for

AutoCAD SHX Text Electrical Contractor to inter-wire with exhaust fan(s) per code.

AutoCAD SHX Text

4. All C.F.M. requirements shown on drawing to be verified

AutoCAD SHX Text by Mechanical Engineer. All C.F.M. specified by Frank Redmond

AutoCAD SHX Text Design Group are rated at duct collar only and do not

AutoCAD SHX Text include any static pressure of duct required.

AutoCAD SHX Text

5. All duct collars, cut-outs and penetrations in hoods to be

AutoCAD SHX Text located and provided by mechanical contractor in field.

AutoCAD SHX Text

6. General Contractor to provide all duct chases from hood

AutoCAD SHX Text through roof in accordance with applicable codes.

AutoCAD SHX Text

1. Mechanical Contractor to provide fans, duct work, AutoCAD SHX Text (all welding of hood and duct required) controls, duct

AutoCAD SHX Text collar, final connection, make up air equipment and permits.

AutoCAD SHX Text

2. Mechanical contractor ( H.V.A.C. ) to balance exhaust system.

AutoCAD SHX Text

3. All roof curb and roof jacks to be provided, located and

AutoCAD SHX Text installed by G.C. including resealing of roof and roof

AutoCAD SHX Text

VENTILATION NOTES

AutoCAD SHX Text penetrations.

AutoCAD SHX Text unless otherwise specified

AutoCAD SHX Text

7. Kitchen Equipment Contractor to provide and install

AutoCAD SHX Text kitchen exhaust hoods as specified in drawings.

AutoCAD SHX Text

5. All curbs or recessed mat area dimensions are finished

AutoCAD SHX Text dimensions. Verify face and top finishes ( where curb is

AutoCAD SHX Text exposed ) with Architect, General Contractor or Owner.

AutoCAD SHX Text

6. All curbs heights to be taken from finished floor to top of

AutoCAD SHX Text

7. All curb dimensions are taken from finished wall to face of

AutoCAD SHX Text finished curb, or from finished face of curb to finished face

AutoCAD SHX Text

8. See Plumbing plan(s) for exact location of floor sinks and

AutoCAD SHX Text

4. Provide coved base-molding or coved integral floor

AutoCAD SHX Text

3. Provide masonry pads with trowelled smooth and level top

AutoCAD SHX Text

2. Fill excess depression around walk-in refrigerator/freezer

AutoCAD SHX Text and level. Depth as noted by Frank Redmond Design Group.

AutoCAD SHX Text

1. Provide walk-in refrigerator/freezer depressions. Trowel smooth

AutoCAD SHX Text finished curb.

AutoCAD SHX Text floor drains. Verify with Plumbing Contractor.

AutoCAD SHX Text of curb.

AutoCAD SHX Text

MASONRY NOTES:

AutoCAD SHX Text with grout, finish floor material, and covered after

AutoCAD SHX Text materials as required at all vertical surfaces for

AutoCAD SHX Text refrigerator/freezer installed by K.E.C.

AutoCAD SHX Text kitchen floors.

AutoCAD SHX Text as required.

AutoCAD SHX Text

FIRE PROTECTION SYSTEM NOTES

AutoCAD SHX Text valve with Fire Suppression System.

AutoCAD SHX Text

3. Kitchen Equipment Contractor to provide gas shut-off solenoid

AutoCAD SHX Text and\or electric fuel line cut-off.

AutoCAD SHX Text to panels, to meet all applicable codes.

AutoCAD SHX Text Electrical Contractor shall furnish and install line

AutoCAD SHX Text

6. All hand held fire extinguishers to be provided by General

AutoCAD SHX Text voltage wiring and conduit from fire protection micro-switch

AutoCAD SHX Text Contractor shall furnish and install shunt trips, line

AutoCAD SHX Text electrical panel by means of shunt trips. Electrical

AutoCAD SHX Text

4. Electrical cooking equipment shall be shut-off at the

AutoCAD SHX Text valve and connect cut-off relay and solenoid valve as

AutoCAD SHX Text voltage wiring and conduit from cut-off relay to solenoid

AutoCAD SHX Text valve shall be installed by the Plumbing Contractor. The

AutoCAD SHX Text

5. Electrically controlled or manually controlled gas solenoid

AutoCAD SHX Text Actuation of the system shall provide automatic gas

AutoCAD SHX Text pull station shall be located as shown on the drawings.

AutoCAD SHX Text operable at the nozzle release and a remote manual

AutoCAD SHX Text

2. The system shall be automatically actuated or manually

AutoCAD SHX Text codes. The system shall be installed by authorized

AutoCAD SHX Text conformance with N.F.P.A Pamphlet 96, local and state

AutoCAD SHX Text The size and number of systems shall be in

AutoCAD SHX Text and cooking appliances against fire and re-flash.

AutoCAD SHX Text shall be provided to protect all cooking exhaust hoods, ducts, AutoCAD SHX Text

1. Where indicated on drawings, a liquid chemical system

AutoCAD SHX Text required.

AutoCAD SHX Text Contractor.

AutoCAD SHX Text installers, in accordance with UL/ETL 300 Listing.

AutoCAD SHX Text consult the architect's, engineers and/or other

AutoCAD SHX Text

1. The plumbing rough-ins and connections shown on these

AutoCAD SHX Text plans are for food service equipment requirements only. It

AutoCAD SHX Text plumbing requirements.

AutoCAD SHX Text consultant's plans and the owner for further building

AutoCAD SHX Text is the responsibility of the Plumbing Contractor to

AutoCAD SHX Text requirements.

AutoCAD SHX Text E. pH Factor greater than 7.5

AutoCAD SHX Text

8. Mechanical Contractor to provide a Capture-

AutoCAD SHX Text Containment Test and fees where applicable per code.

AutoCAD SHX Text

SEE ELECTRICAL PLAN FOR LOAD AND DETAIL REQUIREMENTS

AutoCAD SHX Text

UNDER BAR TOP LIGHTING BY GENERAL CONTRACTOR REQUIRED.

AutoCAD SHX Text

ALL KITCHEN EQUIPMENT (EXCLUDING HAND SINKS) TO RECEIVE

AutoCAD SHX Text

SANITATION FOUNDATION (NSF) STANDARDS OR EQUIVALENT.

AutoCAD SHX Text

WALLS AND CEILING IN KITCHEN AREAS TO BE LIGHT COLORED,

AutoCAD SHX Text

A MINIMUM OF 140%%D HOT WATER AT FIXTURE

AutoCAD SHX Text

COLORED.

AutoCAD SHX Text

HEALTH DEPARTMENT NOTES

AutoCAD SHX Text

ALL EQUIPMENT AND INSTALLATION TO MEET NATIONAL

AutoCAD SHX Text

SMOOTH, NONABSORBENT AND EASILY CLEANABLE.

AutoCAD SHX Text

FLOORS AND BASE IN KITCHEN AREAS TO BE LIGHT

AutoCAD SHX Text 4.

AutoCAD SHX Text 5.

AutoCAD SHX Text 1.

AutoCAD SHX Text 3.

AutoCAD SHX Text 2.

AutoCAD SHX Text

SPECIFIED BY MECHANICAL ENGINEER AND PROVIDE BY G.C.

AutoCAD SHX Text

ALL CARBONATORS REQUIRE A BACK-FLOW PREVENTION DEVICE

AutoCAD SHX Text 6.

GT

SCHEDULE OF EQUIPMENT

I T

E M

Q U

A N

T I T

Y

P U

R C

H A

S E

D

B

Y

I N

S T

A L

L E

D

B

Y

N I K

E C

DESCRIPTION MAKE MODEL REMARKS

1 3 KEC KEC AIR CURTAIN MARS LPV260-1U/ LPV242-1U/ LPV-236-1U

2 LOT EXISTING EXISTING

GLASS, CUP & DISH DOLLY

EXISTING RELOCATE

3 15 EXISTING EXISTING MOBILE SHELVING UNIT METRO BR-SERIES SIZE PER PLAN FS-1

4 9 KEC KEC FLOOR TROUGH WITH GRATE CUSTOM S/S SIZE PER PLAN FS-1 & DETAIL FF-25A SHEET FS-8

5 2 KEC KEC PRODUCE PREP SINK WITH FAUCET CUSTOM S/S

6 2 KEC KEC TABLE MOUNT OVERSHELF CUSTOM S/S

7 4 EXISTING EXISTING MOBILE PREP TABLE CUSTOM S/S 72" X 36"X 36" HIGH

8 2 EXISTING EXISTING REACH IN REFRIGERATOR HOSHIZAKI CR2S-HS

9 1 KEC KEC WALK IN PREP ROOM COOLER KOLPAK CUSTOM

10 1 KEC KEC PREP ROOM COIL KOLPAK CUSTOM

11 1 KEC KEC PREP ROOM CONDENSER KOLPAK CUSTOM

12 2 KEC KEC FLAKED ICE MACHINE WITH BIN HOSHIZAKI F-500 BAF

13 4 KEC KEC WATER FILTRATION SYSTEM HOSHIZAKI 9326-02

14 1 EXISTING EXISTING VACUUM SEALER BERKEL 250

15 3 EXISTING EXISTING FOOD PROCESSOR GLOBE

16 13 NIKEC NIKEC PENDANT RECEPTACLE BY E.C. FROM CEILING DOWN TO 76"

17 3 EXISTING EXISTING

BANQUET CART

CARTER HOFFMAN BB120

18 1 EXISTING EXISTING FOOD WARMING CART CARTER HOFFMAN HWFU18A1GM

19 3 EXISTING EXISTING COOK AND HOLD OVEN ALTO SHAAM RELOCATE

20 21 KEC KEC MOBILE SHELVING UNIT METRO METROSEAL-3 SIZE PER PLAN FS-1 & FS-6

21 1 KEC KEC MEAT AGING ROOM KOLPAK CUSTOM

22 1 KEC KEC LOW HUMIDITY AGING ROOM COIL KOLPAK KAM26-073-1EC-PR-8

23 1 KEC KEC AGING ROOM CONDENSER KOLPAK KPC68MZOP-2E

24 1 KEC KEC MEAT SAW HOBART 6614

25 2 KEC KEC MOBILE PREP TABLE CUSTOM S/S

26 1 KEC KEC TWO COMPARTMENT MEAT PREP SINK CUSTOM S/S

27 1 KEC KEC WALL MOUNT SHELF WITH UTENSIL RACK CUSTOM S/S

28 1 KEC KEC DISPOSER WITH CONTROL PANEL AND CONE SALVAJOR 300/208

29 8 KEC KEC HAND LAV. WITH SOAP AND TOWEL DISPENSER AMTEKCO DH-26

30 1 NIKEC NIKEC PRESSURE WASHER BY OWNER

UTILITIES IN 7 LOCATIONS, SEE PLANS

31 1 EXISTING EXISTING ICE CREAM BATCH FREEZER WITH STAND TAYLOR 104-27

32 1 KEC KEC FISH STORAGE FILE CONTINENTAL DL-2RS-SS

33 1 KEC KEC BAKERY WALK IN REFRIGERATOR KOLPAK CUSTOM

34 1 KEC KEC BAKERY WALK IN COIL KOLPAK KAM26-094-1EC-PR-8

35 1 KEC KEC BAKERY WALK IN CONDENSER KOLPAK KPC98MZOP-2E

36 1 EXISTING EXISTING POTATO PEELER HOBART RELOCATE

37 LOT KEC KEC COOLER TRIM CUSTOM S/S

38 1 EXISTING EXISTING VERTICAL CUTTER MIXER STEPHAN VCM-40

39 1 EXISTING EXISTING FOOD CUTTER HOBART 84186

40 1 EXISTING EXISTING THREE COMPARMENT SINK WITH UTENSIL RACK EXISTING RELOCATE

41 1 EXISTING EXISTING DOUGH SHEETER RONDO 55063

42 1 EXISTING EXISTING

20 QT. FLOOR MIXER

HOBART HL-200

43 LOT EXISTING EXISTING BAKERY PAN RACK EXISTING RELOCATE

44 1 KEC KEC ROTATING RACK BAKE OVEN DOYON SR01G

45 1 KEC KEC DOUBLE STACK CONVECTION OVEN VULCAN SG44

46 1 KEC KEC OVEN VENTILATION HOOD CAPTIVE AIR CUSTOM

47 1 EXISTING EXISTING ROLL IN PROOFING CABINET EXISTING RELOCATE

48 2 EXISTING EXISTING

80 QT. FLOOR MIXER

EXISTING

49 1 EXISTING EXISTING MIXER ATTACHMENT RACK CUSTOM S/S

50 2 KEC KEC MAPLE TOP BAKER'S TABLE CUSTOM S/S

51 1 KEC KEC TABLE MOUNT UTENSIL RACK CUSTOM S/S

52 1 KEC KEC BAKER'S TABLE CUSTOM S/S

53 1 EXISTING EXISTING TWO COMPARTMENT BAKERY PREP SINK EXISTING RELOCATE

54 2 KEC KEC WALL MOUNT SHELF WITH UTENSIL RACK CUSTOM S/S

55 1 NIKEC NIKEC CHEF'S DINING TABLE WITH CHAIRS BY OTHERS

56 1 KEC KEC MEAT CUTTING ROOM COOLER KOLPAK CUSTOM

57 2 KEC KEC LOW PROFILE MEAT ROOM COOLER COIL KOLPAK CUSTOM

58 1 KEC KEC MEAT ROOM CONDENSER KOLPAK CUSTOM

59 1 EXISTING EXISTING

ANTIQUE COPPER KETTLE ANTIQUE

RELOCATE DIRECT STEAM

60 1 KEC KEC BAKERY WALK IN FREEZER KOLPAK CUSTOM

61 1 KEC KEC BAKERY FREEZER COIL KOLPAK KEL26-077-2EC-PR-8

62 1 KEC KEC BAKERY FREEZER CONDENSER KOLPAK KPC298LZOP-2E

63 1 EXISTING EXISTING VERTICAL DOUGH SHEETER RANDELL BRT-300X

64 1 EXISTING EXISTING REACH IN FREEZER TRUE RELOCATE

65 2 KEC KEC POT FILLER FAUCET T & S B-0600

66 1 EXISTING EXISTING PORTABLE BREAD SLICER OLIVER T-58N

67 1 KEC KEC BEVERAGE COUNTER CUSTOM S/S

68 2 NIKEC NIKEC COFFEE MAKER FETCO CBS-2150

69 2 NIKEC NIKEC COFFEE GRINDER FETCO GR2.3

70 1 NIKEC NIKEC ICED TEA BREWER BUNN 41400

71 1 KEC KEC DROP IN COLD PAN FOR JUICE DELFIELD N81146NB

72 1 KEC KEC WALL SHELF CUSTOM S/S

73 2 NIKEC NIKEC SODA AND ICE DISPENSER BY VENDOR

74 2 KEC KEC ICE MAKER HOSHIZAKI KM-515MAH

75 1 NIKEC NIKEC ESPRESSO MACHINE BY OWNER

76 2 NIKEC NIKEC BAG N THE BOX SODA SYSTEM BY VENDOR

77 2 NIKEC NIKEC CO2 SYSTEM BY VENDOR

78 1 EXISTING EXISTING HAND LAVATORY WITH STAND CUSTOM S/S

79 1 NIKEC NIKEC WATER BOTTLING SYSTEM BY OWNER

80 2 KEC KEC SLICER STAND CUSTOM S/S

81 2 EXISTING EXISTING SLICER HOBART HS-7

82 1 KEC KEC RICE COOKER TOWN 57155

83 4 KEC KEC REFRIGERATED PREP TABLE TRUE TPP-67-D2

84 1 KEC KEC DROP IN ICE CREAM CABINET DELFIELD 227L

85 1 KEC KEC DROP IN DIPPERWELL WITH FAUCET KROWNE 16-149

86 1 KEC KEC ICE CREAM COUNTER CUSTOM S/S

87 1 KEC KEC RAPID COOK OVEN TURBO CHEF SOTA

88 1 KEC KEC SINGLE PASS SHELF CUSTOM S/S

89 6 NIKEC NIKEC P.O.S. PRINTER BY OWNER

90 1 KEC KEC CHEF'S COUNTER CUSTOM S/S

91 3 KEC KEC UNDERCOUNTER REFRIGERATOR TRUE TUC-60

92 2 KEC KEC PANINI PRESS

EQUIPEX

SAVOY

93 1 KEC KEC PASTRY BACK COUNTER CUSTOM S/S

94 1 KEC KEC REACH IN REFRIGERATOR HOSHIZAKI CR2S-HS

95 1 KEC KEC PANTRY STATION SERVING COUNTER CUSTOM S/S

96 2 EXISTING EXISTING REACH IN REFRIGERATOR HOSHIZAKI CR2S-HS

97 1 EXISTING EXISTING REFRIGERATED MAKE TABLE TRUE TPP-67-D4

98 2 EXISTING EXISTING WAFFLE IRON CARBON GOLDEN MALTED

99 1 KEC KEC UNDER COUNTER FREEZER TRUE TUC-27F-HC

100 1 KEC KEC ISLAND EXPEDITER COUNTER CUSTOM S/S

SCHEDULE OF EQUIPMENT

I T

E M

Q U

A N

T I T

Y

P U

R C

H A

S E

D

B

Y

I N

S T

A L

L E

D

B

Y

N I K

E C

DESCRIPTION MAKE MODEL REMARKS

101 1 KEC KEC DOUBLE PASS SHELF ASSEMBLY CUSTOM S/S

102 4 KEC KEC HEAT LAMP ASSEMBLY WITH REMOTE CONTROL HATCO GRAH-84

103 1 KEC KEC EXPEDITER PASS SHELF CUSTOM S/S

104 1 KEC KEC DROP IN STEAM TABLE DELFIELD N8731-D

105 20 KEC KEC PENDANT HEAT LAMP WITH TRACK ADVANCE DL-750-CTL RED FINISH

106 2 KEC KEC DROP IN COLD PAN DELFIELD N-8018

107 1 KEC KEC PRIME RIB WARMER HATCO FSHC-5WI-EE

108 1 KEC KEC PAN DRYING SHELF CUSTOM S/S

109 2 KEC KEC INDUCTION COOKER COOK TEC AC3500G

110 1 KEC KEC WAFFLE STATION REFRIGERATOR TRUE TSSU-60-08

111 1 EXISTING EXISTING RAPID COOK OVEN TURBO CHEF SOTA

112 1 KEC KEC TYPE I EXHAUST VENTILATOR CAPTIVE AIR CUSTOM

113 2 KEC KEC FIRE SUPPRESSION SYSTEM CAPTIVE AIR CUSTOM

114 3 EXISTING EXISTING SIX BURNER RANGE WITH OVEN MONTAGUE 136-5

115 1 EXISTING EXISTING COUNTER TOP BROILER IMPERIAL IRB-48

116 1 EXISTING EXISTING GRIDDLE WITH OVEN MONTAGUE IHR-G36

117 1 EXISTING EXISTING FOUR BURNER RANGE WITH OVEN MONTAGUE 136-5A

118 1 KEC KEC FRY DUMP STATION FRYMASTER SPREADER CAB FO

119 1 KEC KEC FRYER SYTEM WITH FILTER FRYMASTER FPGL230-2LCA

120 1 EXISTING EXISTING FRENCH TOP RANGE WITH OVEN MONTAGUE 136-9A

121 1 EXISTING EXISTING RANGE MOUNT CHEESE MELTER EXISTING RELOCATE

122 1 KEC KEC GRIDDLE WITH STAND MONTAGUE DG2436-SAT

123 1 KEC KEC PASTA COOKER ELECTRO PRO 169121-ACPG125

124 1 EXISTING EXISTING

REFRIGERATED EQUIPMENT STAND

TRUE TRCB-48

125 1 EXISTING EXISTING ROTISSERIE ALTO SHAAM AR-6G

126 1 EXISTING EXISTING BLAST CHILLER ALTO SHAAM

QC2-100-TOUCH

127 9 KEC KEC MOBILE WORK TABLE CUSTOM S/S

128 3 KEC KEC RANGE MOUNT SALAMANDER BROILER VULCAN 36IRB-N

129 1 NIKEC NIKEC VIEW WINDOW BY G.C.

130 2 EXISTING EXISTING 40 GALLON TILTING KETTLE DIRECT STEAM GROEN FT-40

131 1 KEC KEC 40 GALLON TILT SKILLET GROEN BPM-30G

132 1 KEC KEC VIEW WINDOW TRIM CUSTOM S/S

133 2 KEC KEC COMBI OVEN WITH WATER FILTER CONVOTHERM 4-EASY TOUCH

134 1 KEC KEC CHINESE RANGE MONTAGUE CR-1

135 1 KEC KEC TYPE I EXHAUST VENTILATOR CAPTIVE AIR CUSTOM

136 2 KEC KEC WALL FLASHING CUSTOM S/S

137 2 KEC KEC ROLL IN CART FOR ITEM 105 ALTO SHAAM INCLUDED

138 2 KEC KEC ROLL IN REFRIGERATOR TRUE STA-2RRI-2S

139 1 KEC KEC ROLL IN HEATED CABINET TRUE STA-2HRI-2S

140 SPARE NUMBER

141 1 KEC KEC UNDER COUNTER REFRIGERATOR TRUE TUC-36-ADA

142 1 KEC KEC BREAD TRAY SLIDES CUSTOM S/S

143 SPARE NUMBER

144 SPARE NUMBER

145 2 KEC KEC WATER CONTROL CABINET T & S B-2339-LR

146 2 KEC KEC WALL MOUNTHOSE REEL T & S B-7122-C02

147 1 KEC KEC SINK SANITIZER HATCO 3CS2-3

148 1 KEC KEC FLIGHT TYPE POT WASHER CHAMPION EUCC-5/6/6 STEAM HEATED

149 1 KEC KEC FLIGHT TYPE DISHWASHER CHAMPION EUCC-5/6/6 STEAM HEATED

152 1 KEC KEC POT SOAK SINK CUSTOM S/S

153 SPARE NUMBER

154 1 KEC KEC WALL MOUNT UTENSIL RACK AMTEKCO SWMPR1-84

155 1 KEC KEC THREE COMPARMENT SINK WITH FAUCET AMTEKCO C-3-2424-24D-C

156 3 KEC KEC WALL FLASHING CUSTOM S/S

157 1 EXISTING EXISTING TYPE II VAPOR HOOD EXISTING RELOCATE RECONFIGURE FOR NEW LAYOUT BY M.C.

158 1 EXISTING EXISTING VAPOR VENTILATION SYTEM EXISTING MODIFY BY M.C.

159 SPARE NUMBER

160 3 KEC KEC PRE RINSE T & S B-133-ADF-LN/ B-113-B

161 1 KEC KEC SOILED DISH TABLE CUSTOM S/S

162 1 KEC KEC WASTE ACCUMULATOR WITH TROUGH ADAPTOR SALVAJOR S419

163 1 KEC KEC DUAL GLASS RACKING SHELF CUSTOM S/S

164 2 KEC KEC MOBILE SILVER SOAK SINK ADVANCE 9-FSC-20

165 2 EXISTING EXISTING ICE TRANSPORT CART CAMBRO ICS100L

166 1 KEC KEC ICE MAKER HOSHIZAKI KM-1900RH3

167 1 KEC KEC ICE BIN WITH BAGGING SYSTEM FOLLETT SG2650-72

168 1 KEC KEC WATER FILTRATION SYSTEM HOSHIZAKI 9326-03

169 3 NIKEC NIKEC LAUNDRY CART BY OWNER

170 1 KEC KEC REMOTE CONDENSER FOR ITEM 166 HOSHIZAKI URC-22F

171 SPARE NUMBER

172 SPARE NUMBER

173 SPARE NUMBER

174 1 KEC KEC DROP IN STEAM TABLE DELFIELD N8759-D

175 1 KEC KEC PROTECTOR CASE BSI CUSTOM

176 1 NIKEC NIKEC P.O.S. SYSTEM BY OWNER

177 1 NIKEC NIKEC CASHIER COUNTER CUSTOM MILLWORK

178 LOT NIKEC NIKEC EMPLOYEE DINING TABLE BY OWNER

179 LOT NIKEC NIKEC EMPLOYEE DINING CHAIR BY OWNER

180 SPARE NUMBER

181 SPARE NUMBER

182 1 KEC KEC DROP IN COLD PAN DELFIELD N-8056

183 1 EXISTING EXISTING MICROWAVE OVEN EXISTING RELOCATE

184 1 KEC KEC EMPLOYEE DINING SERVICE COUNTER CUSTOM S/S

185 1 KEC KEC REFRIGERATOR/FREEZER TRUE RELOCATE

186 SPARE NUMBER

187 1 NIKEC NIKEC FLAT SCREEN T.V. BY OWNER

188 1 NIKEC NIKEC SOFA BY OWNER

189 SPARE NUMBER

190 SPARE NUMBER

191 LOT EXISTING EXISTING ROOM SERVICE CART EXISTING RELOCATE

192 1 NIKEC NIKEC ROOM SERVICE TELEPHONE BY OTHERS

193 1 KEC KEC WALL MOUNT SHELF CUSTOM S/S

194 1 KEC KEC ROOM SERVICE COUNTER CUSTOM S/S

195 SPARE NUMBER

196 SPARE NUMBER

197 SPARE NUMBER

198 SPARE NUMBER

199 SPARE NUMBER

200 SPARE NUMBER

SPARE NUMBER

SPARE NUMBER

4743 E. FOOTHILL DR.

PARADISE VALLEY, AZ. 85253

602-377-7290

Project No

Date:

Sheet:

A

B

C

D

E

F

G

H

J

K

L

A

2 13456789101112131415

2 13456789101112131415

FS-2

SCHEDULE

0515-0180.02

YOSEMITE NATIONAL PARK

JANUARY 5, 2018

DESIGN DEVELOPMENT

Number Revision Description Date

Concessioner:

Aramark, Leisure

DBA: Yosemite Hospitality in partnership with

The National Park Service

THE MAJESTIC HOTEL

KITCHEN FLOOR REPLACEMENT

EQUIPMENT

MECH. & ELEC. NOTE:

ELECTRICAL NOTES:

1. RUN HORIZONTAL WIRING ON

EXTERIOR OF BOX

2. HEAT TAPE ON FREEZER

DRAINS SUPPLIED & INSTALLED

BY ELECTRICAL CONTRACTOR

SUPPLIED

S

BY E.C.

3 WAY SWITCH FOR LIGHTING

SUPPLIED

S

BY E.C.

3 WAY SWITCH FOR LIGHTING

3. VAPOR PROOF LED LIGHTS FOR

WALK INS SHIPPED LOOSE BY KEC

INSTALLED AND WIRED BY E. C.

4. ITEM 16, PENDANT RECEPTACLES

SPECIFIED BY ELEC. ENGR., SUPPLIED,

INSTALLED AND WIRED BY E. C.

4. DUPLEX CONVENIENCE OUTLETS (DCO)

SPECIFIED BY ELEC. ENGR., SUPPLIED,

INSTALLED AND WIRED BY E. C.

SUPPLIED S

BY E.C.

SWITCH FOR ITEM 105

SUPPLIED

S

BY E.C.

SWITCH FOR ITEM 105

4743 E. FOOTHILL DR.

PARADISE VALLEY, AZ. 85253

602-377-7290

Project No

Date:

Sheet:

A

B

C

D

E

F

G

H

J

K

L

A

2 13456789101112131415

2 13456789101112131415

FS-3

PLAN

0515-0180.02

YOSEMITE NATIONAL PARK

JANUARY 5, 2018

DESIGN DEVELOPMENT

Number Revision Description Date

Concessioner:

Aramark, Leisure

DBA: Yosemite Hospitality in partnership with

The National Park Service

THE MAJESTIC HOTEL

KITCHEN FLOOR REPLACEMENT

SCALE:

" = 1'-0"

CONNECTIONELECTRICAL

AutoCAD SHX Text D

AutoCAD SHX Text D

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text D

AutoCAD SHX Text

LINES IN THIS AREA

AutoCAD SHX Text

RUN SYRUP & CARB.

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text SEE SHEETS FS-5.1 THRU FS-5.3 FOR EXHAUST AND MUA VOLUMES, ELECTRICAL CONNECTIONS ETC.

AutoCAD SHX Text E1

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

AIR OUT

AutoCAD SHX Text C

AutoCAD SHX Text E1

AutoCAD SHX Text S

AutoCAD SHX Text

CR

AutoCAD SHX Text E1

AutoCAD SHX Text E1

AutoCAD SHX Text E1

AutoCAD SHX Text C

AutoCAD SHX Text G

AutoCAD SHX Text G

AutoCAD SHX Text C

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text D

AutoCAD SHX Text H

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text

DCO

AutoCAD SHX Text +40"

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text

DCO

AutoCAD SHX Text

DN+78"

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .