090600 Schedule for Finishes - Copy.docx

SECTION 09 06 00

SCHEDULE FOR FINISHES

SECTION 09 06 00-SCHEDULE FOR FINISHES

VAMC:

Location:

Project no. and Name:

Submission Date:

INSTRUCTIONS FOR PREPARATON OF

SECTION 09 06 00-SCHEDULE FOR FINISHES

GENERAL:

Use, SECTION 09 06 00, SCHEDULE FOR FINISHES as a master format for construction projects, to identify interior and exterior material finishes for type, texture, patterns, color and placement. Fully coordinate with other VA master construction specification sections for information, abbreviations and symbols contained in this Section to be consistent and fully coordinated with those in drawings, finish schedules and material boards.

Provide dimensions in metric followed by English equivalent in parenthesis, when applicable.

Slash symbol (//.. //) Edit information contained between these symbols for project or delete if not applicable. These are not always used.

Delete pages SECTION 09 06 00, SCHEDULE FOR FINISHES-i, ii, iii from final document. Submit complete master document that you received with edit marks during Design Development and Construction Document stage of project. Provide a re-typed version for final document.

Coordinate with VA handbook H-08-14, Room Finishes, Door and Hardware Schedule.

Explanation of Terms:

Material Abbreviations: Use in Room Finish Schedule to identify Finish Materials.

Example: GWB-W is Gypsum Wall Board- Vinyl coated fabric wallcovering finish surface.

Paint, Stain, or Coating Code and Finish Code: A number or abbreviation you assign for material color system texture and pattern in conjunction with a manufacturer’s identification when applicable.

Instructions for Part I – General Copy following paragraphs as stated: 1.1 DESCRIPTION, 1.2 MANUFACTURERS, 1.3 SUBMITTALS.

Paragraph 1.5 Digital Color Photos – Interior Views: Include a series of photographic slides, representing a sequential walk-through. Show typical public, patient, staff and all specialized areas. The photography is of architectural quality and are the property of the Department of Veterans Affairs, Office of Facility Management.

Instruction for Part II Products – Interior and Exterior Edit outline to suit the project. The outline is divided by technical specification section and list items requiring finish selections. Locations are designated either in room finish schedule in this section or shown on drawings.

Some products are listed for which a VA guide specifications is not available; no technical Section number shown, Section will have to be written.

Identify locations for products not shown in Room Finish Schedule. Some items require identification of room number and name to establish location.

Identify color, texture, patterns as applicable with manufacturer’s identification label with a product or abbreviations are identified throughout drawings and specification sections. Coordinate for uniformity and consistency. Do not duplicate abbreviations for different materials. Avoid conflicts with technical specification sections. Example; Vinyl Composition Tile (VCT).

Some Sections specify finish on product and are not included in Part II, i.e. 10350, FLAGPOLES.

Whenever possible minimize use of multiple manufacturer’s for colors and ones which constitute large quantities such as paint, plastic, laminate and carpet.

Loose items are not permitted in construction contracts unless an integral component of a fixed item i.e. keys for locks, adjustable shelves in cabinets.

Give preference to products containing recovered materials when price performance and availability meets project requirements.

Give sizes in metric followed by English in parenthesis, i.e. 100 mm (4 inches).

Instructions for Part III – Execution

Paragraph 3.1 a: Finish Schedules and Miscellaneous Abbreviations-provide a complete list of product abbreviations used on project. Edit list to suit project.

Paragraph 3.1 b: Finish Schedule Symbols: Edit symbol list to suit project.

Paragraph 3.2: Room Finish Schedule- Finish schedule format is contained in architectural package or at end of this Section. Surface for walls “C” is for free standing columns.

Finish Plans: these plans are a part of architectural drawing set as an adjunct to the finish schedule. Use for showing wall, ceiling and floor patterns and identifying stopping and starting points for finishes exterior elevations may be used to show locations of various finishes identified by finish code and materials.

01-01-21

09 06 00 - ii

SECTION 09 06 00

SCHEDULE FOR FINISHES

DESIGNER NOTE: Delete between //. // if not applicable to project. Also delete any other item or paragraph not applicable in the section and renumber the document.

GENERAL

DESCRiPTION This section contains a coordinated system in which requirements for materials specified in other sections shown are identified by abbreviated material names and finish codes in the room finish schedule or shown for other locations.

MANUFACTURERS

Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equivalent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of technical specifications will be acceptable upon approval in writing by contracting officer for finish requirements.

SUBMITALS

Submit in accordance with SECTION 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES provide quadruplicate samples for color approval of materials and finishes specified in this section.

DESIGNER NOTE: See instructions.

DIGITAL COLOR PHOTOS-INTERIOR VIEWS:

DESIGNER NOTE: Update Applicable Publications to correct issue at time of project specification preparation.

applicable publications Publications listed below form a part of this specification to the extent referenced. Publications are referenced in text by basic designation only.

MASTER PAINTING INSTITUTE: (MPI)

6/1/2019 Architectural Painting Specification Manual

PRODUCTS

DIGITAL COLOR PHOTOS

Size 24 x 35 mm.

Labeled for:

Building name and Number.

Room Name and Number.

Division 31 - EARTHWORK

SECTION 32 31 13, CHAIN LINK FENCES AND GATES

Coated

Galvanized

Painted (P)

SECTION 32 14 16, BRICK UNIT PAVING.

SECTION 32 17 23, PAVEMENT MARKINGS.

Yellow

White

ASPHALTIC BLOCK PAVER

CONCRETE PAVERS

BOLLARDS (ORNAMENTAL)

Precast concrete

Stone

SITE AND STREET FURNISHINGS

DESIGNER NOTE: Specify site and street furnishings only when permanently anchored.

Loose items are not in contract.

Benches

Game Tables

Planters

Tree Grates

Trash Receptacles

Ash Receptacles

DESIGNER NOTE: Specify only 03300 or 03301 when coated with a cementitious paint or special form work patterns are required.

Division 03 – CONCRETE SECTION 03 30 00, CAST IN PLACE CONCRETE // SECTION 03 30 53, (SHORT FORM) CAST-IN-PLACE CONCRETE //

SECTION 03 45 00, PRECAST ARCHITECTURAL CONCRETE

DIVISON 04 – MASONRY

DESIGNER NOTE: Grout is not exposed.

Section 04 05 13, MASONRY MORTARING and Section 04 05 16, MASONRY GROUTING

Section 04 20 00, UNIT MASONRY

FACE BRICK (FB)

0. CERAMIC GLAZED FACING BRICK (CGFB)

CONCRETE MASONRY UNIT (CMU)

CMU Standard

Glazed Face

Sound Absorbing

Split Rib

Ground Face

CLAY TILE UNITS

Glazed Structural Facing Tile (SFTU)

Structural Clay Load Bearing Wall Tile (SFTU)

UNIT MASONRY (04 20 00)

GLASS MASONRY UNITS

STONE MASONRY

STONE FACING

Division 05 – METALS DESIGNER NOTE: Include structural steel items only when exposed to view.

SECTION 05 12 00, STRUCTURAL STEEL FRAMING

SECTION 05 21 00, STEEL JOIST FRAMING

SECTION 05 31 00, STEEL DECKING, SECTION 05 36 00, COMPOSITE METAL DECKING

SECTION 05 40 00, COLD-FORMED METAL FRAMING

DESIGNER NOTE: See Section 05 50 00, METAL FABRICATION for items specified and finishes for exposed surfaces.

SECTION 05 50 00, METAL FABRICATIONS

Modular Channel Units

Channel Door Frames

Frames for Lead Lined Doors

Structural Steel Angle Corner Guards

Guard Angles for Overhead Doors

Edge Guards Angles for Opening in Slabs

Wheel Guards

Steel Covers and Frames for pits and trenches

Cast Iron Covers and Frames for Pits and Trenches

Steel Grating and Frames

Aluminum Gratings and Frames

Steel Plank Gratings

Cast Iron Gratings

Loose Lintels

Steel Plate Door Sill

Aluminum Plate Door Sill

Cast Iron Safety Nosing

Aluminum Safety Nosing

Steel Ladders

Aluminum Ladders

Steel Ladder Rungs

Steel Pipe Railings and Gates (not on Steel Stairs)

Aluminum Railings

Stainless Steel Railings

Ornamental Railings

Catwalks

Floor Trap Door and Ceiling Hatch

Sidewalk Door

Screened Access Door and Frame

Steel Counter or Bench Top Frame and Legs.

SECTION 05 51 00, METAL STAIRS

Newel Posts

Guard Rails

Handrails

Stringers

Risers

Underside

SECTION 07 95 13, EXPANSION JOINT COVER ASSEMBLIES

Floor Component Cover Plate Frame Casket or Sealant (interior only)

Wall Component Cover Plate Frame Casket or Sealant

Ceiling Component Cover Plate, Gasket or Sealant

Exterior Wall Cover Plate Frame Thermoplastic Joint

Garage Floor Steel

Division 06 WOOD, PLASTICS, AND COMPOSITES

DESIGNER NOTE: Include 06 10 00 items only when exposed to view.

SECTION 06 10 00, ROUGH CARPENTRY

DESIGNER NOTE: Coordinate with Section 06 20 00, FINISH CARPENTRY for items specified there as listed and additional items added for the project which are custom fabricate under this section.

Communication center counter is custom fabricated for specific locations. List locations of each counter. Rubber or vinyl base is specified in Section 09 65 13, RESILIENT BASE AND ACCESORIES. Specify other base material. Duplicate items 1,2,3,4 for individual room numbers

SECTION 06 20 00, FINISH CARPENTRY

RECEPTION COUNTER PUBLIC OR PATIENT SIDE

Countertop

Vertical Surface(s)

Trim

Reveal

Handrail

Bumper guard

Base

RECEPTION COUNTER STAFF SIDE

Task Surface

Vertical Surface

Tackable Wall Covering

Shelving

Trim

Drawers

Misc. Items

NURSES STATION STAFF SIDE

Vertical Surface(s)

Tackable Wall Covering

Shelving

Trim

Drawers

Misc. Items

Base

NURSES STATION - PATIENT SIDE

Transaction Countertop

Vertical Surface(s)

Trim

Reveal

Handrail

Bumper Guard

Base

INTERVIEW BOOTH – PATIENT SIDE

Countertop Surface

Trim

Base

Vertical Under Countertop Panel

INTERVIEW BOOTH – STAFF SIDE

Counter top surface

Trim

Base

Vertical Under Countertop Panel

Trim

Base

DESK IN CREDIT UNION

Task Surface

Panels

Exposed Steel Frame

Trim

PATIENT PARCIPATION MODULE AT PREVENTATIVE DENSTISTRY

Countertop

Dividers

Trim

Compartments

SEATS AND BENCHES (TYPE 20 A, 12 E, 13 B)

Seat

Support

MOUNTING STRIPS, SHELVES AND RODS

Strips

Shelf

Rod

PEGBOARD (PERFORATED HARDBOARD)

Spacing Strip

Pegboard

Trim

VANITIES (TYPES S4, S4 M)

Countertop

Trim

FOLDING SHELVES (TYPE B OR A)

Wood Strips

Shelf

THROUGH – WALL COUNTER OR PASS THROUGH COUNTER (TYPE B)

Wood Edge

Countertop

Brackets

RECEIVING SHELF IN AGENT CASHIER

Bracket

Shelf

WALL PANELING IN CORRECTIVE THERAPY

Panel

Trim

Base

DISPLAY CABINET (TYPE 25)

Back

Sides

Shelves

Trim

Doors

Base

WOOD TOP FOR WORK BENCHES

WOOD HANDRAILS

GLASS FIBER REINFORCE PLASTIC PANELS

Division 07 - THERMAL AND MOISTURE PROTECTION

SECTION 07 31 13, ASPHALT SHINGLES

SECTION 07 31 29.13, WOOD SHINGLES

SECTION 07 31 26, SLATE SHINGLES

SECTION 07 32 13, CLAY ROOF TILES

SECTION 07 40 00, ROOFING AND SIDING PANELS

SECTION 07 24 00, EXTERIOR INSULATION AND FINISH SYSTEMS

SECTION 07 54 19, POLYVINYL-CHLORIDE ROOFING

SETION 07 53 23, ETHYLENE-PROPYLENE-DIENE-MONOMER (e) ROOFING

SECTION 07 57 13, SPRAYED POLYURETHANE FOAM ROOFING

Silicone Rubber Top Coat

Ceramic Granules

SECTION 07 56 00, FLUID-APPLIED ROOFING

BUILT-UP BITUMINOUS ROOFING (07 51 00) / COLD ADHESIVE STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING (07 52 16.11) / HOT-MOPPED STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING(07 52 16.13)/ POLYVINYL-CHLORIDE ROOFING (07 54 19) / ETHYLENE-PROPYLENE-DIENE-MONOMER (EPDM) ROOFING (7 53 23)

SECTION 07 14 21, LATEX MASTIC DECK COVERING

SECTION 07 18 13, PEDESTRIAN TRAFFIC COATINGS

SECTION 07 60 00, FLASHING AND SHEET METAL

Copings Copper

Stainless steel

Aluminum

Stainless steel

Aluminum

Aluminum

Copper

Stainless steel

Scuppers

SECTION 07 61 16, BATTEN SEAM SHEET METAL ROOFING

STANDING SEAM ROOFING (NO VA GUIDE SECTION)

SECTION 07 71 00, ROOF SPECIALITIES and 07 72 00, ROOF ACCESSORIES

SECTION 07 92 00, JOINT SEALANTS

Masonry Expansion Joints

CMU Control Joints

Precast Concrete Panels

New to Existing Walls

Building Expansion Joints

Masonry Sealed Joints

Stone Sealed Joints

Division 08 - OPENINGS

SECTION 08 11 13, HOLLOW METAL DOORS AND FRAMES

Paint both sides of door and frames same color including ferrous metal louvers, and hardware attached to door

Door

Frame

Window frame

SECTION 08 14 00, INTERIOR WOOD DOORS

Doors

Frames

SECTION 08 31 13, ACCESS DOORS AND FRAMES

Steel

Stainless steel

SECTION 08 11 73, SLIDING METAL FIRE DOORS

SECTION 08 33 00, COILING DOORS AND GRILLES

Door

Grille

SECTION 08 33 13, COILING COUNTER DOORS

DESIGNER NOTE: Use for opening of 2100 mm (7 feet) high or less and 1200 mm ( 4 feet) wide or less.

SECTION Doors 08 35 13.13, ACCORDIAN FOLDING DOORS

DESIGNER NOTE: Flexible door has a standard black cover. Select finish on frame Section 05 50 00, METAL FABRICATIONS.

SECTION 08 38 16, FLEXIBLE TRAFFIC DOORS

Steel

SECTION 08 36 13, SECTIONAL DOORS

SECTION 08 41 13, ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS

Aluminum

Glass

SECTION 08 42 33, REVOLVING DOOR ENTRANCES

Aluminum

Glass

Stainless Steel

SECTION 08 51 23, STEEL WINDOWS

Window

Trim

Screens

Sills

Stools

DESIGNER NOTE: Coordinate with 08 80 00 for glazing systems.

SECTION 08 51 13, ALUMINUM WINDOWS

Hung

Casement

Projected

Dual Horizontal Sliding

Single Horizontal Sliding

Fixed

SECTION 08 51 13.11, SIDE-HINGED ALUMINUM WINDOWS

SECTION 08 63 00, METAL-FRAMED SKYLIGHTS

Frame

SECTION 08 51 69.11, ALUMINUM STORM WINDOWS

SECTION 08 56 19, PASS WINDOWS

WINDOW SILLS

Aluminum (With Windows)

SECTION 04 72 00, CAST STONE MASONRY

WINDOW STOOLS

Marble (09 63 40)

Ceramic Tiling (09 30 13)

Plastic Laminate

Finish Carpentry (06 20 00)

DESIGNER NOTE: Coordinate with Section 08 71 00, DOOR HARDWARE for preferred finishes, specified par 2.28. List only items deviating form Section 08 71 00, par 2.28.

SECTION 08 71 00, BUILDERS HARDWARE

Hinges

Door Closers

Floor Closers

Floor Pivot Sets

Closer/ Holder

Floor Stops

Door Holders

Lock/ Latches

Plastic

Plastic

Door Edging

Exit Device

Flush Bolts

Door Pulls

Push Plates

Combination Push Pull Plate

Coordinators

Light Proof Seals

Weather Strip

Threshold

Designer note: See Section 08 80 00, GLAZING for glazing types and terminology omit clear glazing, transparent mirror and glazing assemblies.

SECTION 08 80 00, GLAZING

G-6

G-7

G-8

G-9

G-10

G-11

G-12

G-13

G-14

G-15

G-16

G-17

SECTION 08 44 13, GLAZED ALUMINUM CURTAIN WALLS

Frame

Glazing

Standard Panel

DESIGNER NOTE: Use Section 09 24 00, PORTLAND CEMENT PLASTERING only if integral color finish occurs. Delete if painted.

Division 09 - FINISHES

SECTION 09 24 00, PORTLAND CEMENT PLASTERING

SECTION 09 30 13, CERAMIC/PORCELAIN TILING

CERAMIC MOSAIC TILE (FT)

SECTION 09 30 13, CERAMIC/PORCELAIN TILING

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] QUARRY TILE (QT)

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] QUARRY TILE GROUT

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] PAVER TILE (PVT)

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] PAVER TILE GROUT

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] PORCELAIN PAVER TILE (PPT)

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] PORCELAIN PAVER TILE GROUT

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] MARBLE THRESHOLDS

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] MARBLE WINDOW STOOLS

SECTION 09 30 13, [CERAMIC/PORCELAIN TILING] METAL DIVIDER STRIPS

DESIGNER NOTE: See National Terrazzo and Mosaic Association, Inc. “Terrazzo Design Data” or Marble Products Co. “Terrazzo Color Plates.” Use these color plates for selection of design where possible.

SECTION 09 66 13, PORTLAND CEMENT TERRAZZO FLOORING

THIN SET TERRAZZO (TST)

SECTION 09 66 13, [PORTLAND CEMENT TERRAZZO FLOORING] DIVIDER STRIPS

SECTION 09 66 16, TERRAZZO FLOOR TILE (TT)

SECTION 09 66 16, [TERRAZZO FLOOR TILE] TERRAZZO TILE GROUT

SECTION 09 51 00, ACOUSTICAL CEILINGS

Exposed Suspension System

Type III

Type III A

Type V

Type VI

Type VII

Type XX A

Type XX B

SECTION 09 54 23, LINEAR METAL CEILINGS (LMC)

SECTION 09 63 13, BRICK FLOORING / 09 63 40, STONE FLOORING

(BF)

(SF)

BF Grout

SF Grout

SECTION 09 65 19, RESILIENT TILE FLOORING

VCT

R

RT

SECTION 09 65 16, RESILIENT SHEET FLOORING (RSF)

SECTION 09 65 16, [ RESILIENT SHEET FLOORING], HEAT WELDED SEAMS (WSF)

SECTION 09 65 16, [RESILIENT SHEET FLOORING], WELDING RODS (WSF)

SECTION 09 65 16, [RESILIENT SHEET FLOORING], CAP STRIPS (WSF)

SECTION 09 65 13, RESILIENT BASE AND ACCESSORIES

Rubber Base (RB)

Vinyl Base (VB)

Resilient Stair Treads (RST)

Sheet Rubber Flooring (SRF)

SECTION 09 68 00, CARPETING (CP)

SECTION 09 68 00, [CARPETING], CARPET EDGE STRIP

Metal

Vinyl

SECTION 09 68 00, [CARPETING], CARPET BASE MOLDING

SECTION 09 68 00, [CARPETING], CARPET MODULES (CFT)

SECTION 09 68 21, ATHELETIC FLOORING, CARPET (CAF)

LATEX MASTIC FLOORING (LM) (NO VA GUIDE SECTION)

Vinyl Resin

Neoprene Resin

SECTION 09 67 23.20, RESINOUS (EPOXY BASE) WITH VINYL CHIP BROADCAST(RES-2) / SECTION 09 67 23.30, RESINOUS (EPOXY BASE) HIGH PERFORMANCE DECORATIVE MORTAR FLOORING(RES-3) / SECTION 09 67 23.40, RESINOUS POURED IN PLACE RESILIENT FLOORING(RES-4) / SECTION 09 67 23.50, RESINOUS TERRAZO FLOORING(RES-5) / SECTION 09 67 23.50, RESINOUS URETHANE AND EPOXY MORTAR FLOORING(RES-6A & RES-6B)

SECTION 09 96 59, RESINOUS SPECIALTY GLAZED COATING SYSTEMS FOR WALLS, CEILINGS WALLBOARD AND BLOCK CMU(RES-W1 & RES-W2)

SECTION 09 94 19, MULTI-COLOR INTERIOR FINISHING (MIF)

DESIGNER NOTE: Pavement marking see Section 32 14 16, BRICK UNIT PAVING. Paints and Coating now specified by Master Painters Institute Standards, including gloss and sheen designations. Use paint, stain or coating code to identify these finishes in room finish schedule or for products specified under Section Finishes, use gloss level 1 or 4 for clear coating.

SECTION 09 91 00, PAINTING

MPI Gloss and Sheen Standards

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

Semi

S

S

S

S

S

S

S

S

CC

CC

SECTION 09 72 16, VINYL COATED FABRIC WALLCOVERINGS (W)

SECTION 09 72 16, [VINYL COATED FABRIC WALLCOVERINGS], EDGE GUARD OR TRIM (W)

0. SECTION 09 72 31, [POLYPROPYLENE FABRIC WALLCOVERING], EDGE GUARDS (PFW)

SECTION 09 72 31, [POLYPROPYLENE FABRIC WALLCOVERING], WAINSCOT CAP (PEW)

SECTION 09 84 33, SOUND ABSORBING WALL UNITS (SAWU)

Division 10 - SPECIALTIES

SECTION 10 11 13, CHALKBOARDS AND MARKERBOARDS / SECTION 10 11 23, TACKBOARDS

SECTION 10 21 23, CUBICLE CURTAIN TRACKS

SECTION 10 22 26.13, ACCORDION FOLDING PARTITIONS (AFP)

1. Panels

Plasters

Doors

Urinal Screens

2. Panels

Plasters

Doors

3. Panels

Plasters

Doors

4. Panels

Doors

Plasters

5. Panels

Plasters

Doors

SECTION 10 21 16, PREFABRICATED SHOWER AND DRESSING COMPARTMENTS

SECTION 08 90 00, LOUVERS AND VENTS

SECTION 10 26 00, WALL AND DOOR PROTECTION

Corner Guards

Wall Guards and Handrail

Wall Guard

Door Frame Protection

SECTION 09 69 00, ACCESS FLOORING (AF)

SECTION 10 28 00, TOILET, BATH AND LAUNDRY ACCESSORIES / SECTION 10 14 00, SIGNAGE / SECTION 11 17 36, PACKAGE TRANSFER UNITS

Mop racks

Package Transfer Box

Lobby Clock

SECTION 10 13 00, EXTERIOR DIRECTORIES / SECTION 10 14 00, EXTERIOR SIGNAGE

SECTION 10 13 00, INTERIOR DIRECTORIES / 10 14 00, INTERIOR SIGNAGE

SECTION 10 44 13, FIRE EXTNGUISHER CABINETS

SECTION 10 22 13, WIRE MESH PARTITIONS

SECTION 10 22 19, DEMOUNTABLE PARTITIONS

SECTION 10 22 26.13, ACCORDION FOLDING PARTITIONS (AFP)

Panel Face

Panel Edge

SECTION 10 28 00, TOILET, BATH AND LAUNDRY ACCESSORIES

DESIGNER NOTE: Use Section 10 28 00, TOILET, BATH, AND LAUNDRY ACCESSORIES for colored accessories. Not required for aluminum or stainless steel items.

SECTION 10 28 00, [TOILET, BATH AND LAUNDRY ACCESSORIES] CUSTOM TOILET ACCESSORIES

Vinyl Fabric

DIVISION 11 – EQUIPMENT

SECTION 11 12 00, PARKING CONTROL EQUIPMENT

Ticket Dispenser

Gate and Arm

Booth Exterior

Booth Interior

Booth Shelf

SECTION 08 56 66, DETENTION WINDOW SCREENS

Type A

Type B

Type C

Door Screen

SECTION 11 41 00, FOOD STORAGE EQUIPMENT

Refrigerators, Mechanical, Food, Self Contained, Reach-in, Roll-in, Pass Through

Outer Shell

Doors

Loading Cart

Transfer Carriage

SECTION 11 40 21, FOOD SERVICE EQUIPMENT-UTILITY DISTRIBUTION SYSTEMS

SECTION 11 26 00, UNIT KITCHEN

Cabinet

Wall Splash

SECTION 11 27 00, PHOTOGRAPHIC PROCESSING EQUIPMENT

Steel Cabinets

Plastic Laminate

SECTION 11 53 53, BIOLOGICAL SAFETY CABINETS AND LAMINAR AIRFLOW WORK STATIONS

H 12 A

H 12 B1

H 12 B 2

H 12 B 3

H 20

SECTION 11 53 13, LABORATORY FUME HOODS

Molded Resin

Steel

Base Cabinet

SECTION 13 21 29, CONSTANT TEMPERATURE ROOMS

VL 52-24 R

VL 52-24 F

VL 52 E-24R

VL 52 EF-24

CTR

Division 12- FURNISHINGS

SECTION 12 31 00, MANUFACTURED METAL CASEWORK

1. PHARMACY

PH 61

PH 71

PH 77

PH 77W

PH 77U

PH 77D

2. SHELVES

4 A

4 B

5 C

6 A

6 B

6 C

6 E

7 A

7 B

3. LOCKERS

A

B

C

S 3

4. CABINETS

1 A

1 B

1 G

8 A

8 B

8 C

14 A

5. COUNTERS

1 F

1 K

1 L

15 A

15 B

15 D

15 E

15 F

16 A

16 B

SECTION 12 32 00, MANUFACTURED WOOD CASEWORK

Cabinet Dental Service

Countertop

Radiology Countertop

DESIGNER NOTE: Construction of counter tops including materials is specifies in 12303. Use 12303 for defining countertop types and construction for tops specified furnished in other sections.

SECTION 12 36 00, COUNTERTOPS

Plastic Laminate

Chemical Resistant Plastic Laminate

Molded Resin

Maple Tops

Methyl Methacrylate

SECTION 12 34 00, MANUFACTURED PLASTIC CASEWORK

Component

Support Rails

Free Standing Support

Shelf Unit

Hardware

Countertops

Panels

SECTION 12 22 16, DRAPERY HARDWARE AND ACCESSORIES

Aluminum

Steel

SECTION 12 24 00, WINDOW SHADES

Shade Cloth

Vertical Blinds

Venetian Blinds

Support Hardware

SECTION 12 24 21, LIGHTPROOF SHADES

Shade Cloth

Framing

SECTION 12 56 70.11, SUSPENDED TABLE

Table Top

Suspension System

Ceiling Assembly

Division 13 - SPECIAL CONSTRUCTION SECTION 11 41 21, WALK-IN COOLERS AND FREEZERS / SECTION 11 53 23, LABORATORY REFRIGERATORS / SECTION 11 78 13, MORTUARY REFRIGERATORS

Quarry Tile Floor

Galvanized Steel Floor

DESIGNER NOTE: See 13 05 41 for items exposed to view requiring finishes.

SECTION 13 05 41, SEISMIC RESTRAINT REQUIREMENTS FOR NON-STRUCTURAL COMPONENETS

SECTION 13 34 19, METAL BUILDINGS SYSTEMS

Exterior Wall Panels

Exterior Roof Panels

Interior Wall Panels

Interior Structural Framing

Doors

Windows

Louvers

DESIGNER NOTE: Coordinate with 09900 for color of exterior surfaces.

SECTION 22 12 16, FACILITY ELEVATED, POTABLE-WATER STORAGE TANKS

SECTION 13 17 23.11, THERAPEUTIC POOL ACCESSORIES

DESIGNER NOTE: Repeat components for elevators having different materials and finishes. Number passenger and freight elevators consecutively for both traction and hydraulic. Do not use the same number for traction and hydraulic elevators. List elevators having same finish in elevator number space.

2.14 DIVISION 14 – CONVEYING EQUIPMENT

0. SECTION 14 21 00, NEW TRACTION ELEVATORS

Hoistway Doors

Corridor Position Indicator and Call Buttons

Car Floor

Car Operating Panel

Freight Elevator No. F

0. SECTION 14 24 00, NEW HYDRAULIC ELEVATORS

1. Passenger Elevator No. P

Hoistway Entrances

Hoistway Doors

Corridor Position Indicator

Car Canopy

Car Wainscot

Panels Above Wainscot

Car Floor

Corridor Call Buttons

Car Doors

Car Door Frame

Corridor Position Indicator

Car Operating Panel

2. Service Elevator No. S

Hoistway Entrances

Hoistway Doors

Car Canopy Car Doors

Car Wainscot

Panels Above Wainscot

Car Floor

Car Operating Panel

Corridor Position Indicator

Corridor Call Button

3. Freight Elevator No. F

Hoistway Entrance

Hoistway Doors

Car Canopy

Car Sides

Car Gate

Rubbing Strips

Car Floor

Station Directories

0. Division 22 - PLUMBING

SECTION 22 40 00, PLUMBING FIXTURES

Water Closet

Urinal

Bathtubs

Lavatories

Service Sink Corner

Service Sink

Clinic Service Sink

Plaster Sink

Laundry Tub

DIVISON 26 - ELECTRICAL

DESIGNER NOTE: Edit to suit project. If outdoor switchgear, transformers, or other electrical equipment are to have finishes other than the manufacturer’s standard finish, specify the finishes herein and edit the appropriate Division 26 specifications to reference these schedules.

SECTION 26 51 00, INTERIOR LIGHTING

SECTION 26 56 00, EXTERIOR LIGHTING

SECTION 10 25 13, PATIENT BED SERVICE WALLS

Cabinet Frame

Face Panel

Doors

EXECUTION

FINISH SCHEDULES & MISCELLANEOUS ABBREVIATIONS

DESIGNER NOTE: Edit to suit project. Check abbreviations with technical section to avoid conflict or duplicate abbreviations for different materials.

PART 1 -

FINISH SCHEDULE & MISCELLANEOUS ABBREVIATIONS

Suspension Decorative Grids Grids

SDG

Terrazzo, Thin Set

3.2 FINSIH SCHEDULE SYMBOLS

DESIGNER NOTE: Do not substitute these symbols. Add new symbols as required.

Symbol Definition

3.3 ROOM FINISH SCHEDULE

DESIGNER NOTE: Copy as stated for projects requiring alterations.

Match adjoining or existing similar surfaces colors, textures or patterns where disturbed or damaged by alterations or new work when not scheduled.

DESIGNER NOTE: Use the schedule below to edit for rooms on project include existing rooms demolished and delete new section not part of new work. Use new section to show revision to existing work. Delete exist Sections for new construction.

ROOM FINISH SCHEDULE

Room No.

and Name

FLOOR

BASE

WALL

WAINSCOT

CEILING

REMARKS

E X I S T

N

E

S

W

C

N

W

N

E

S

W

C

E X I S T

N

E

S

W

C

N

E

S

W

C

EXIST

N

E

S

W

C

N

E

S

W

C

--- E N D---