FABRICATION OF STEEL CUSTOM LIFTING HOOKS
Added: Jun 11, 2018 1:44 pm
This is a SOURCES SOUGHT NOTICE/REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to:(1) determine if sources capable of satisfying the agency's requirements exists; (2) determine if commercial items suitable to meet the agency's needs are available, or could be modified to meet the agency's requirements; (3) determine the commercial practices of company's engaged in providing the needed service or supply; and (4) seek comments and questions from industry regarding the draft statement of work (SOW). Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action.REQUIREMENT: This Notice is issued by the United States Coast Guard (USCG), Surface Forces Logistics for the procurement of steel custom lifting hooks.ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 331513, Steel Foundries (except Investment) and the size standard is 500 employees.SUBMISSION OF RESPONSE TO SOURCES SOUGHT NOTICE: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information.Submission of Response to Sources Sought Notice:• Deadline for Receipt: NLT Thursday, June 26th, 2018 at 4:00PM EST• Forward information regarding your Company via email to:Adam.f.petty@uscg.mil• Email size not to exceed (NTE) 10MB• Include the following information:o Subject Line: Sources Sought Response for FSteel Custom Lifting Hooks Requiremento Company Name:o Address:o Point of Contacto Phone number:o Email address:o DUNS Numbero Business Size applicable to the NAICS Code• Please state which of the following applies to your company with documentation verifying your socio-economic business status:a. 8(a)- provide a copy of your 8(a) Certification from the Small Business Administration (SBA);b. HUBZone- provide a copy of your HUBZONE Certificate from the SBA;c. Service-Disabled Veteran Owned Small Business (SDVOSB)- provide documentation that shows the ServiceDisabled Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs;d. Veteran Owned Small Business (VOSB)- provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours;e. Economically Disadvantaged Woman Owned Small Business (EDWOSB)- provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours;f. Woman Owned Small Business (WOSB)- provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens;g. Small Business (SB);h. Large Business (LB).Note: The documentation should clearly state the socioeconomic status of the business as either 8(a), HUBZone, SDVOSB, VOSB, EDWOSB, WOSB, SB or LB under the NAICS code 331513 Steel Foundries (except Investment)STATEMENT OF QUOTE SUBMISSION: State how your company will provide the product and provide an affirmative statement that your company WILL submit a quote as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice.PAST PERFORMANCE INFORMATION:(1) Provide a list of your products/ experience with Steel custom lifting hooks similar in type and description to include contract numbers, project titles, dollar amounts, points of contact, and telephone numbers.(2) If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. (3) SAM (Formally known as CCR): Interested parties should register in the System for Award Management (SAM) as prescribed in FAR Clause 52.232-33.DISCLAIMER AND IMPORTANT NOTES: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by theGovernment to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitationContracting Office Address:2401 Hawkins Point Rd, Baltimore, MD 21226 United StatesPrimary Point of Contact:Adam PettyAdam.F.Petty@uscg.milPhone: (410) 762-6651Secondary Point of Contact: Travis SpiresTravis.A.Spires@uscg.milPhone: (410) 762-6058
70Z08518I40017B00 Department of Homeland Security US Coast Guard
6/11/18, 1:44 PM DK Cast Iron Floor Grates
This combined synopsis/solicitation is being issued as a request for quotation (RFQ) IAW FAR Part 13. The Air Force Sustainment Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma, intends to award one firm fixed price contract for the acquisition of three hundred fourteen(314) dock grates "type A" and one hundred sixty four (164) dock grate "type C". In addition for instructions outlines in 52.212-1 offerors are instructed to include, IAW 52.211-6: 1.) Brand name or equal information. IAW 52.212-4 Addendum: 2.) Offers of express warranties normally provided to the commercial market to include extended warranties.
Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.
FA812520Q0005 Department of the Air Force Materiel Command
10/16/19, 3:18 PM APE 1236 & 1400 Retorts
Army Contracting Command- Rock Island (ACC-RI) has a requirement for 2 sets of APE 1236 retorts in the base year of the contemplated five-year IDIQ with estimated quantities of 0 to 2 sets for each of the four remaining ordering periods. Quantities estimated for the APE 1400 retorts will be 0 sets for the base ordering period and 0 to 1 set for each of the remaining four ordering periods.
These retorts require design, build, and acceptance test of the item fabricated in accordance with the drawings/specifications indicated within the purchase description and Technical Data Package (TDP). All technical data packages will be released with the official solicitation to interested offerors according to Distribution Statement D per DoD Instruction 5230.24, August 23, 2012.
This notice neither constitutes a Request for Quote, nor does it restrict the Government to an ultimate acquisition approach. It should not be construed as a commitment by the Government for any purpose nor will the Government pay for information solicited.
W52P1J-22-R-RETORT Department of the Army Materiel Command Joint Munitions Command
3/2/22, 3:42 PM