FABRICATION OF STEEL CUSTOM LIFTING HOOKS
Added: Jun 11, 2018 1:44 pm
This is a SOURCES SOUGHT NOTICE/REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to:(1) determine if sources capable of satisfying the agency's requirements exists; (2) determine if commercial items suitable to meet the agency's needs are available, or could be modified to meet the agency's requirements; (3) determine the commercial practices of company's engaged in providing the needed service or supply; and (4) seek comments and questions from industry regarding the draft statement of work (SOW). Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action.REQUIREMENT: This Notice is issued by the United States Coast Guard (USCG), Surface Forces Logistics for the procurement of steel custom lifting hooks.ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 331513, Steel Foundries (except Investment) and the size standard is 500 employees.SUBMISSION OF RESPONSE TO SOURCES SOUGHT NOTICE: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information.Submission of Response to Sources Sought Notice:• Deadline for Receipt: NLT Thursday, June 26th, 2018 at 4:00PM EST• Forward information regarding your Company via email to:Adam.f.petty@uscg.mil• Email size not to exceed (NTE) 10MB• Include the following information:o Subject Line: Sources Sought Response for FSteel Custom Lifting Hooks Requiremento Company Name:o Address:o Point of Contacto Phone number:o Email address:o DUNS Numbero Business Size applicable to the NAICS Code• Please state which of the following applies to your company with documentation verifying your socio-economic business status:a. 8(a)- provide a copy of your 8(a) Certification from the Small Business Administration (SBA);b. HUBZone- provide a copy of your HUBZONE Certificate from the SBA;c. Service-Disabled Veteran Owned Small Business (SDVOSB)- provide documentation that shows the ServiceDisabled Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs;d. Veteran Owned Small Business (VOSB)- provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours;e. Economically Disadvantaged Woman Owned Small Business (EDWOSB)- provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours;f. Woman Owned Small Business (WOSB)- provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens;g. Small Business (SB);h. Large Business (LB).Note: The documentation should clearly state the socioeconomic status of the business as either 8(a), HUBZone, SDVOSB, VOSB, EDWOSB, WOSB, SB or LB under the NAICS code 331513 Steel Foundries (except Investment)STATEMENT OF QUOTE SUBMISSION: State how your company will provide the product and provide an affirmative statement that your company WILL submit a quote as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice.PAST PERFORMANCE INFORMATION:(1) Provide a list of your products/ experience with Steel custom lifting hooks similar in type and description to include contract numbers, project titles, dollar amounts, points of contact, and telephone numbers.(2) If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. (3) SAM (Formally known as CCR): Interested parties should register in the System for Award Management (SAM) as prescribed in FAR Clause 52.232-33.DISCLAIMER AND IMPORTANT NOTES: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by theGovernment to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitationContracting Office Address:2401 Hawkins Point Rd, Baltimore, MD 21226 United StatesPrimary Point of Contact:Adam PettyAdam.F.Petty@uscg.milPhone: (410) 762-6651Secondary Point of Contact: Travis SpiresTravis.A.Spires@uscg.milPhone: (410) 762-6058
70Z08518I40017B00 Department of Homeland Security US Coast Guard
6/11/18, 1:44 PM APE 1236 & 1400 Retorts
Army Contracting Command- Rock Island (ACC-RI) has a requirement for 2 sets of APE 1236 retorts in the base year of the contemplated five-year IDIQ with estimated quantities of 0 to 2 sets for each of the four remaining ordering periods. Quantities estimated for the APE 1400 retorts will be 0 sets for the base ordering period and 0 to 1 set for each of the remaining four ordering periods.
These retorts require design, build, and acceptance test of the item fabricated in accordance with the drawings/specifications indicated within the purchase description and Technical Data Package (TDP). All technical data packages will be released with the official solicitation to interested offerors according to Distribution Statement D per DoD Instruction 5230.24, August 23, 2012.
This notice neither constitutes a Request for Quote, nor does it restrict the Government to an ultimate acquisition approach. It should not be construed as a commitment by the Government for any purpose nor will the Government pay for information solicited.
W52P1J-22-R-RETORT Department of the Army Materiel Command Joint Munitions Command
3/2/22, 3:42 PM Timesavers Model Lynx 37MWT-DB-60
Synopsis: NASA/NSSC has a requirement for Timesavers Model Lynx 37MWT-DB-60. This is a Brand Name requirement. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Kennedy Space Center (KSC). This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-99. The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. This is a Request for Quotations (RFQ), 80NSSC18Q1268. Additional details are included in the attached RFQ file. The attached RFQ file is hereby incorporated into this solicitation. Delivery is FOB Destination. This Procurement is Set Aside for Small Business The NAICS Code for this procurement is 333513 All responsible sources may submit a quote which shall be considered by the agency. However, any award from this RFQ shall require the potential vendor to be certified within the System for Award Management System (SAM) and completion of Reps and Certs in the SAM system prior to award at www.sam.gov. Quotes for the item(s) described in the RFQ are due by 9/5/2018 by 11:00 a.m. ET to Enter Name at Enter email address in order to be considered for award. If it is in the best interest of the Government, quotes submitted after the due date may be accepted. If the end product offered is other than a domestic end product as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. All contractual and technical questions must be in writing (e-mail) to Donna Martin at donna.s.martin@nasa.gov no later than 8/31/2018 by 11:00 a.m. ET. Telephone questions shall not be accepted. The following clauses and provisions are applicable to this combined synopsis/solicitation: 52.212-1, Instructions to Offerors; 52.212-3 Offeror Representations and Certifications-Commercial Items; 52.212-4 Contract Terms and Conditions-Commercial Items; 52-212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html . The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.html Offerors must include completed copies of the provision at 52.212.3 Offeror Representations and Certifications-Commercial Items with their offer. These representations and certifications will be incorporated by reference in any resultant contract. Contracting Office Address: NASA Shared Services Center, Jerry Hlass Rd. Stennis Space Center, MS 39529 .
80NSSC18Q1268 National Aeronautics and Space Administration Shared Services Center
8/29/18, 9:14 AM SUCTION WYE SECTION
Added: Dec 01, 2008 1:48 pm
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. A written proposal will be issued. The solicitation number is W912EQ-09-T-0010. This acquisition is issued as a request for quote. This acquisition is 100% Set-aside for Small Business solicitation. The associated NAICS code is 331513 with a size of 500 personnel. The following is a list of contract line item number(s): CLIN 0001: WYE Section, Chrome nickel steel, pattern #3637 drawing # SK 1064 (see attached drawing); CLIN 0002 Freight USACE will transport patterns to vendor once order is awarded. Vendor will be responsible for returning the pattern in good condition to the USACE. Contractors shall submit a lump sum quotation to include all chargers. Quotes may be submitted in hard copy or electronically, either through regular mail, email, or by facsimile. Regardless of the method of delivery, it is the offerors responsibility to ensure receipt of quotes by the time and date stated herein.Contractor shall submit completed clause 52.212-3, Offeror Representation and Certifications, Commercial Items. The following clauses and provisions are incorporated and will remain in full force in any resultant award. The full text of these clauses and provisions can be accessed electronically at website, http://www.farsite.hill.af.mil. FAR 52.212-1 Instructions to OfferorsCommercial Items. FAR 52.212-2 Evaluation-Commercial Items. FAR 52.212-3 Offeror Representation and CertificationsCommercial Items. FAR 52.212-4 Contract Terms and ConditionsCommercial Items. FAR 52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive OrdersCommercial Items (Dev); FAR 52.222-3 Convict Labor; FAR 52.222-19 Child Labor; FAR 52.222-21 Prohibition of Segregated Facilities; FAR 52.222-26 Equal Opportunity; Affirmative Action For Workers With Disabilities; FAR 52.225-13 Restrictions on Certain Foreign Purchases; FAR 52.232-33 Payment by Electronic Funds Transfer Central Contractor Registration (CCR); FAR 52.252-2 Clauses to Incorporate by Reference; FAR 252.225-7002 Qualifying Country Sources of Subcontracting; FAR 52.247-34 FOB Destination; DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders applicable to Defense Acquisitions of Commercial ItemsFAR 252.232-7003, Electronic Submission of Payment Requests; FAR 252.247-7023 Transportation of Supplies by Sea, Alternate III.The solicitation will be issued on/about December 1, 2008. A copy of the solicitation may be downloaded from the Army Single Face to Industry (ASFI) Acquisition Business Web Site at http://acquisition.army.mil/asfi/. Responses to this solicitation must be received no later than December 11, 2008@ 01:00 PM CST. Quotes should be addressed to Jackie Primer, Contract Specialist, 167 N. Main Street, Memphis, TN 38103, Phone (901) 544-3340, Fax (901) 544-3710, Email Jackie.primer@usace.army.mil . Vendors must be registered in Central Contractor Registration (CCR) prior to award to be eligible for award. Vendors may register in CCR by calling 1-888-227-2423 or online at www.ccr.gov.
W912EQ09T0010 Department of the Army Corps of Engineers Engineering District Memphis
12/1/08, 1:48 PM Muzzle Brake Alternative Casting
Added: Jun 06, 2014 11:18 am
**Important Notice to All Interested Parties: This is a presolicitation notice. Further information and technical data will not be made available until the solicitation is released to public, on or around the estimated date listed below. An active DD Form 2345, Militarily Critical Technical Data Agreement, must be in place to viw all technical data.** Muzzle Brake Alternative Casting, per Drawing # 11578888, Revision U, for 155mm M776 Cannon. First Article Testing is Required. Quantity: 17 each Delivery Point: FOB Destination Delivery: January 1, 2015 Estimated Date of Solicitation: June 21, 2014 SAM Notice: In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications. Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on the Army Single Face to Industry (ASFI) at https://acquisition.army.mil and will be listed under Watervliet Arsenal. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidders mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same. Technical Data Package: Instructions will be available in the solicitation on how to access the associated technical data package. Critical Military Technical Data: The solicitation document contains information that has been designated as quote mark Militarily Critical Technical Data. quote mark Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, have an active DD2345 and have a valid requirement may have a copy of the solicitation document and technical data. To obtain certification, contact the Defense Logistics Information Service (DLIS) at 800.352.3572 or http://www.dlis.dla.mil/ccal. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.
W911PT14R0015 Department of the Army Materiel Command TACOM Life Cycle Management Command
6/6/14, 11:18 AM