UTTR Missile Motor Receipt & Storage Facility

**Amendment 0004 - Incorporate Division 01 Specs, Package 1 MSM and Package 2 Rail/MTF

**Amendment 0003 - Extend proposal due date until 5 December 2019 at 9am and additional changes in section 00 22 16. Amendment 0004 will be posted by the end of this week.

**Amendment 0002 - Extend & Add Davis Bacon Wage Determinations

**Amendment 0003 - Extend proposal due date until 5 December 2019 at 9am and additional changes in section 00 22 16. Amendment 0004 will be posted by the end of this week.

**Amendment 0002 - Extend & Add Davis Bacon Wage Determinations

**Amendment 0002 - Extend & Add Davis Bacon Wage Determinations

**Amendment 0001 - Site Visit Instructions & DB Wag Determination**

**

Action Code: Pre-solicitation Notice

Class Code: Y1GA

NAICS Code: 236220

Subject: UTTR Missile Motor Receipt & Storage Facility

Solicitation Number: W9123819R0006

Set Aside Code: Unrestricted

Response Date: On or about 11/07/2019

Place of Performance:
Hill AFB, Utah

JOB DESCRIPTION:

Design-bid-build (DBB) construction of the Missile Motor Receipt / Storage Facility located at the Utah Test and Training Range (UTTR) in Utah. The scope of this project is to construct eighteen (18) earth-covered Modular Storage Magazines (MSM) configured for air bearing operations for the staging of D5 missile motors. Each magazine will include a mechanical room and an elevated concrete dock and floor with air-pallet- bearing floor finish. Magazines will be located within the existing munitions storage area (MSA) security perimeter. The size of each magazine is based on the Navy Modular Storage Magazine, with modifications to the standard design to be approved by the Department of Defense Explosive Safety Board (DDESB) during the current design phase. This project will provide Anti-Terrorism/Force Protection (AT/FP) features and comply with AT/FP regulations, and physical security mitigation in accordance with DoD Minimum Anti-Terrorism Standards for Buildings. Supporting facilities include site preparation, special foundations, paving, AT/FP features, electrical utilities (primary and secondary distribution, lighting, transformers, telecommunications infrastructure, lightning protection), and mechanical utilities (sanitary sewer, potable water supply, fire protection).

A 7,000 SF, single story, pre-engineered steel-framed, thermal-controlled Motor Transfer Facility (MTF) will be constructed with enclosed vehicle bays, an elevated concrete dock for air pallet operations and concrete pedestals for jacking boxcar. Built-in equipment at the MTF includes a bridge crane (60-tons) with dual trolleys. The site includes concrete paving, parking stalls and perimeter security fencing.

Approximately fifteen (15) miles of railroad track will be constructed to support the movement of specialized D5 boxcars carrying D5 First Stage/Second Stage (FS/SS) missile motors from the Union Pacific (UP) connection point at Lakeside, Utah, to the UTTR, and the movement of the empty boxcars back to the UP point. The track roadbed section includes the grading for the track, ditches, subballast, and ballast. A wye track will be constructed to allow turning of boxcars. The track also includes a boxcar holding area (BHA) track for loaded or unloaded D5 box car marshalling and maintenance with containment pans for servicing the boxcars.

Acquisition Information:

This acquisition is proceeding as an unrestricted competitive solicitation

Estimated Cost Range is between ($25,000,000 $100,000,000). DFARS 236.204(ii)

Period of Performance (POP) for Construction: 730 days

This Procurement will be conducted under PSC CODE: Y1GA, NAICS Code: 236220. The size standard for this code is $36,500,000. All questions should be directed to the Contract Specialist, Deanna C. Zemovich e-mail Deanna.C.Zemovich@usace.army.mil.

It is anticipated that the RFP will be issued on or about September 23, 2019, for downloading at the Government's website at http://www.fedbizopps.gov/. No paper copies will be issued.

The specific date and time will be identified in the solicitation.

OFFERORS ARE ADVISED THAT THIS PROJECT MAY BE DELAYED, CANCELED OR REVISED AT ANY TIME DURING THE SOLICITATION, SELECTION, EVALUATION, NEGOTIATION AND/OR FINAL AWARD PROCESS.

ORDERING SOLICITATION: Plans and specifications will NOT be provided in hard paper copy or CD-ROM format. The solicitation and all amendments for this acquisition will be posted on a secure Government website known as FedBizOpps (www.fbo.gov) once the RFP is issued. Viewing/downloading documents from FedBizOpps will require prior registration in System for Award Management (www.sam.gov). If you are a first-time FedBizOpps user, you will also be required to register in FedBizOpps (www.fbo.gov) before accessing the RFP documents. To register, click on the Register Now button in the Vendors Block and follow the instructions. The following information will be required: System for Award Management (SAM) Marketing Partner Identification Number (MPIN); DUNS Number or Cage Code; Telephone Number; and E-mail Address. Once registered with FedBizOpps, interested parties will then be able to log in and access the RFP documents.

Important Note: Solicitation documents can be accessed ONLY via FedBizOpps. Please note that ALL contractors who want to register with FedBizOpps must be registered in SAM, and have a MPIN, DUNS number or Cage code. For further information, please click on the FedBizOpps homepage link and the Vendor User Guide. The only PLAN-HOLDER'S/BIDDER'S LIST now available is via FedBizOpps. When viewing the Synopsis/Pre-solicitation Notice, you will click on the ‘ADD ME TO INTERESTED VENDORS' to enter your information. This function does not, however, allow you to identify yourself as a Prime or Sub. It is recommended that you identify your category in parentheses at either the beginning or end of your company name. For example: (Prime/Sub) XYZ Construction, or XYZ Construction (Prime/Sub). IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO CHECK FEDBIZOPPS FREQUENTLY FOR ANY AMENDMENTS OR CHANGES TO THE SOLICITATION.