DRAFT Solicitation W519TC-26-R-001 for Special Ammunition and Weapons Systems and Non-NATO Commercial Ammunition
Closed Solicitation Posted
Not the latest version. See the latest solicitation from .
- Solicitation number
- W519TC26R0001-DRAFT
- Agency
-
ACC Rock Island
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332993 Ammunition (except Small Arms) Manufacturing
- PSC
- 1395 Miscellaneous Ammunition
- Place of performance
- N/A Unknown
Notice details come from SAM.gov. Updated .
About this opportunity
The Army Contracting Command - Rock Island (ACC-RI) is soliciting proposals for the procurement of Special Ammunition and Weapon Systems (SAWS) and NATO non-standard ammunition under Draft Solicitation W519TC-26-R-0001. SAWS consist of ammunition and mortar weapons systems not safety-tested or type-classified for U.S. Army use, primarily for non-U.S. weapon systems often produced by Former Soviet Union or Eastern Bloc countries. The procurement will support the Department of War, other U.S. Government agencies, foreign governments, and international organizations. Offerors must be registered with the U.S. Department of State's Directorate of Defense Trade Controls (DDTC), hold a current Federal Firearms License (FFL) Type 11, maintain active System for Award Management (SAM) registration, and demonstrate prior performance as a prime or subcontractor on Arms, Ammunition & Explosives contracts within the last five years. Evaluation will follow a Highest Technically Rated Offeror (HTRO) source selection approach using a sequential process with a mandatory GO/NO-GO gate (Factor 1), an HTRO self-scoring technical matrix with eight evaluation categories (Factor 2) requiring a minimum threshold of 22,220 points out of 27,775 available points, and price fairness assessment (Factor 3). The proposal submission deadline is April 8, 2026, and all documentation must be within five years of the solicitation date.
This is a non-set-aside procurement with no identified current incumbents. The Government anticipates making multiple-award, firm-fixed-price indefinite delivery/indefinite quantity (IDIQ) contracts with a guaranteed minimum delivery order of $1,000 and a maximum quantity ceiling of 3,552,685,000 items across five one-year ordering periods. Key contractual requirements include submission of Technical Data Packages (TDP) within 30 days of delivery order award, completion of Explosive Site Safety Plans, conduction of Lot Acceptance Testing with 60-day advance notification, and provision of Government Source Inspection at the contractor's facility with 14-day advance notification. All ammunition must be new production or new surplus with specific age limitations: items up to 12.7mm bore diameter must be produced within ten years of contract award, while items greater than 12.7mm and weapon systems must be produced within five years. The contractor must maintain comprehensive safety and security programs compliant with Department of Defense manuals, conduct semi-annual program reviews at Picatinny Arsenal, New Jersey or contractor facilities, and ensure all employees requiring installation access complete Anti-Terrorism Level I training within 30 days of award.
Notice text
NOTICE:
This is a Draft Request for Proposal (RFP). The purpose of this document is to provide industry with a general understanding of the requirements of this acquisition and to obtain industry feedback on its content prior to release of the formal RFP. The United States Government (USG) is not utilizing this document to negotiate or solicit proposals, and the issuance of this Draft RFP does not bind the Government in any way. Portions of this Draft RFP are subject to change. Please note the terms RFP and solicitation will be used interchangeably throughout this document. Unless specified, the number of days for all submissions required by the resulting contract shall be calendar days.
GENERAL INFORMATION:
The Army Contracting Command – Rock Island (ACC-RI) and the U.S. Army, Product Lead Special Ammunition and Weapon Systems (PdL SAWS) herein issues draft Solicitation W519TC-26-R-0001. This is for the procurement of Special Ammunition and Weapon Systems (SAWS) and NATO non-standard ammunition (NSA). This is in support of the Department of War (DoW), other USG Agencies, foreign Governments, and international organizations.
SAWS: Ammunition and mortar weapons systems not safety tested or type classified for U.S. Army use. These are mainly for non-U.S. weapon systems and are often produced by Former Soviet Union (FSU) or Eastern Bloc countries.
CONTRACT AND AWARD DETAILS:
Contract Type: The USG anticipates making multiple-award, Firm-Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contracts.
Source Selection: A Highest Technically Rated Offeror (HTRO) source selection approach will be utilized. This is referenced in the DOD Source Selection Guide (para 1.3.1.5) and will be conducted in accordance with FAR Part 15.101-1, DoD Source Selection Procedures, and the Army Source Selection Supplement.
Technical Experience Evaluation: Offeror(s) are required to evaluate their own technical experience using a predetermined questionnaire and self-scoring matrix. Offeror(s) must also submit documentation detailing relevant past technical experience as either a prime contractor or a sub-contractor, along with examples of this experience.
DRAFT HTRO SCORING MATRIX:
The USG is implementing a streamlined and objective process called the Highest Technically Rated Offeror (HTRO). This method prioritizes technical capability to ensure the USG partners with the most capable Prime Contractors. The HTRO process is the source selection methodology the USG will use to establish multiple Indefinite Delivery/Indefinite Quantity (IDIQ) contracts. The HTRO process will identify the most qualified Prime Contractors for base contract awards, who will then compete on individual delivery orders in accordance with fair opportunity procedures in FAR 16.505.
Posted is a draft Attachment 0008 - Highest Technically Rated Offeror (HTRO) Self-Scoring Matrix, in support of the requirement for Special Ammunition and Weapons Systems (SAWS), W519TC-25-R-0001.
Reference the attached video Attachment 0009 - SAWS HTRO Overview, explaining the HTRO method and how it will allow the USG to get proven capabilities quickly, and for Offerors to get a clear, fair, and efficient path to a contract.
The purpose of providing the draft HTRO Matrix is to obtain any industry comments, feedback or questions prior to releasing the Final SAWS RFP W519TC-25-R-0001. The USG is not utilizing any of the materials being released to negotiate or solicit proposals, and the issuance of these documents does not serve to bind the USG in any way. The information provided is subject to change.
The USG is seeking industry feedback on the attached draft to ensure its effectiveness. Please identify which elements are too difficult to achieve, might be too simple, and/or ways to improve the matrix. The USG welcomes any questions.
This is the draft, and the USG intends to have additional drafts of this RFP prior to release of the final solicitation.
All questions and feedback regarding this Draft RFP shall be submitted no later than 1500 CST April 8, 2026 using the following link:
https://forms.osi.apps.mil/r/pyTLHnsisF
The following draft attachments are being released with this post:
DRAFT SAWS RFP W519TC-26-R-0001
0001 SAWS Federal Supply Classification (FSC) Item List
0002 SAWS IDIQ SOW - DRAFT
0003 General Spec for PdL-SAWS General Ammunition
0004 General Spec for PdL-SAWS Small Caliber Ammunition
0005 General Spec for PdL-SAWS Mortar Ammunition
0006 General Spec for PdL-SAWS Rocket Spin Stabilized Grenades
0007 General Spec for PdL-SAWS Mortar Weapons
0008 HTRO Self-Scoring Matrix - DRAFT
0009 SAWS HTRO Overview Video
0015 Security Statement of Work (SOW) - Security Risk Categories I – IV AA&E and SRC I – III Missiles and Rockets
0017 SAWS Safety Statement of Work (SOW)
0018 Ammunition and Explosives (AA&E) Suppliers
Exhibit A Contract Data Requirements List (CDRL)
Files
Show all 14
Notice history
Similar open opportunities
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity