M249 Squad Automatic Weapon (SAW), Ancillary Equipment, and Repair Parts in Support of Foreign Military Sales (FMS)

Open Pre-Solicitation Posted

Solicitation number
PANNWJ-25-P-0000_004618
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Place of performance
Picatinny Arsenal, New Jersey 07806, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The Department of the Army, through Army Contracting Command–Detroit Arsenal (ACC-DTA) in conjunction with Portfolio Acquisition Executive Maneuver Ground / Project Manager Soldier Lethality (PM SL), is conducting market research on sources for 5.56mm M249 Squad Automatic Weapon systems, major subassemblies, spare parts, and logistics support for Foreign Military Sales, with unclassified capability statements due December 21, 2026, at 4:00 PM EST. No set-aside is used. Respondents must demonstrate either independent, unencumbered manufacturing rights and valid export licenses, or an existing commercial licensing agreement with the Original Equipment Manufacturer, Fabrique Nationale Herstal (FN Herstal), to address the Government-held Technical Data Package governed by Contract No. DAAA09-82-C-5361. This sources sought notice under FAR Part 10 does not constitute a solicitation, and the Government will not award a contract based solely on responses.

Scope includes standard and short-barrel M249 variants configured to U.S. Army and NATO standards, along with spare barrel assemblies, 200-round ammunition feed containers, buttstock, bipod, rail interface, and sling assemblies, cleaning and maintenance kits, and spare and repair parts such as barrels, bolts, operating rods, receivers, trigger mechanisms, and springs. Additional requirements include military packaging and preservation under MIL-STD-2073 and MIL-STD-129, First Article Testing and Lot Acceptance Testing, ITAR compliance preparation, and operator and maintainer training.

Capability statements must not exceed ten pages and must be emailed to david.j.diroma.civ@army.mil or derek.j.ghilardi.civ@army.mil. Telephonic inquiries outside the designated point of contact email will not be honored. The notice is classified under PSC 1005 (Guns, Through 30mm) and NAICS 332994 (Small Arms, Ordnance, and Ordnance Accessories Manufacturing), with a small business size standard of 1,000 employees.

Notice text

1. Disclaimer and Important Notes

This Sources Sought Notice is published solely for market research, planning, and information purposes in accordance with Federal Acquisition Regulation (FAR) Part 10. This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), Invitation for Bids (IFB), or announcement of a forthcoming solicitation.

  • The Government will not award a contract based solely on responses received under this notice.
  • The Government will not pay for any information, materials, or documentation submitted in response to this notice, nor will it reimburse any costs incurred by respondents in the preparation of capability statements.
  • Proprietary information, if submitted, must be clearly marked on every page containing proprietary data. The Government will handle proprietary information in accordance with applicable federal statutes and regulations. All material submitted in response to this RFI must be unclassified and properly marked.
  • No manufacturer/distributor shall be given a copy of another manufacturer’s/distributor’s product information collected in this survey.
  • Respondents are advised that telephonic inquiries or questions outside the designated point of contact email will not be honored.

2. Requirement Description & Scope

The Department of the Army, Portfolio Acquisition Executive (PAE) Maneuver Ground / Project Manager Soldier Lethality (PM SL), in conjunction with Army Contracting Command, is conducting market research to identify potential sources capable of manufacturing and delivering 5.56mm M249 Squad Automatic Weapon (SAW) systems, major subassemblies, spare parts, and associated logistics support to fulfill Foreign Military Sales (FMS) requirements.

Scope of Supplies & Support:

  1. Weapon Systems:

    • M249 Squad Automatic Weapon (NATO), including standard and short barrel variants, configured to standard U.S. Army / NATO operational standards.
  2. Major Components & Ancillaries:
    • Spare barrel assemblies (standard and short barrel variants).
    • 200-round ammunition feed containers/adapters.
    • Collapsible and fixed buttstock assemblies, bipod assemblies, rail interface systems (MIL-STD-1913), and sling systems.
    • Individual cleaning, maintenance, and tool kits.
  3. Spare and Repair Parts:
    • Provisioning packages covering both depot-level and field-level repair parts, barrels, bolts, operating rods, receivers, trigger mechanisms, and springs.
  4. Logistics, Packaging, and Quality:
    • Military packaging, preservation, packing, and marking (MIL-STD-2073 and MIL-STD-129).
    • First Article Testing (FAT) / Lot Acceptance Testing (LAT) for proof, function, high-pressure resistance, and interchangeability.
    • Preparation and compliance with foreign customs and International Traffic in Arms Regulations (ITAR) requirements.
  5. Training:
    • Operator and Maintainer Training within and outside of the Continental United States.

3. Technical Data Package (TDP) & Licensing Considerations

Interested parties must carefully note the following technical and licensing parameters:

  • TDP Availability: The Government-held Technical Data Package (TDP) for the M249 platform is subject to restrictive rights and licensing provisions originating under Government Contract No. DAAA09-82-C-5361 with the Original Equipment Manufacturer (OEM), Fabrique Nationale Herstal (FN Herstal).
  • Licensing and Export Rights: The governing license provisions contain specific terms governing foreign distribution, including an express Right of First Refusal reserved by the contractor for foreign military customer sales.
  • Consequently, respondents must demonstrate that they either:
    1. Hold independent, unencumbered rights, proprietary tooling, and valid licenses to manufacture and export M249 weapon systems and parts for international third parties; or
    2. Maintain an existing valid commercial/licensing agreement with the OEM authorizing such production and distribution or are seeking to obtain a commercial/license agreement with the OEM.

4. Capability Statement Instructions

Interested firms that possess the requisite manufacturing capabilities, facility clearances, and legal/licensing qualifications are invited to submit a Capabilities Statement Package. Submissions must not exceed ten (10) pages (excluding title page and executive summary) and should address the following areas:

Part A. Corporate Background & Business Identification

  1. Company Information:

    • Company Name, Address, and Website.
    • CAGE Code and Unique Entity Identifier (UEI) registered in SAM.gov.
    • Point of Contact (Name, Title, Email Address, and Telephone Number).
  2. Business Socioeconomic Classification:
    • Identify business size and status under NAICS 332994 (e.g., Large Business, Small Business, Small Disadvantaged Business, 8(a), HUBZone, Woman-Owned Small Business, Service-Disabled Veteran-Owned Small Business).
  3. Facilities & Security:
    • Manufacturing facility location(s) (must be compliant with applicable domestic sourcing and DFARS requirements).
    • Current facility security clearance level (if applicable).
    • Current Federal Firearms License (FFL) and Special Occupational Tax (SOT) status.

Part B. Technical & Manufacturing Competence

  1. Manufacturing Experience:

    • Summary of prior and current production experience with small-arms machine guns (specifically 5.56mm open-bolt, gas-operated systems) within the last five (5) years.
    • Description of internal manufacturing capabilities (e.g., cold hammer forging, precision CNC machining, heat treating, phosphating/finishing, and automated assembly).
  2. Production Capacity & Throughput:
    • Estimated monthly and annual production capacity for complete weapons and major spare components.
    • Realistic lead times required from receipt of order to initial delivery.
  3. Quality Assurance & Testing:
    • Overview of Quality Management System (QMS) certifications (e.g., ISO 9001:2015, AS9100).
    • Description of on-site testing facilities capable of proof-firing, function verification, high-pressure endurance, and NATO interchangeability verification.

Part C. Technical Data & Licensing Compliance

  1. Data Rights and Intellectual Property:

    • Describe your access to, or ownership of, complete manufacturing drawings, material specifications, and tolerances required to build M249 weapons and parts without reliance on proprietary data belonging to third parties.
    • Provide documentation or a detailed narrative explaining how your firm addresses third-party patent and licensing restrictions for foreign customer sales.

5. Submission Instructions

  • Format: Only electronic responses are requested. Submissions must be in electronic format (Adobe Portable Document Format (.pdf) or Microsoft Word (.docx)), formatted for standard inch pages with 1-inch margins and a font size no smaller than 11-point (Times New Roman or Calibri). All material submitted in response to this RFI must be unclassified and properly marked.
  • Delivery: Send submissions via email to the following points of contact:
    • Contracting Officer: David DiRoma, Contracting Officer, ACC-DTA, Email: david.j.diroma.civ@army.mil
    • Contract Specialist: Derek Ghilardi, Contract Specialist, ACC-DTA, Email: derek.j.ghilardi.civ@army.mil
  • Subject Line Format: Response to Sources Sought - M249 FMS Requirement - [Company Name]
  • Closing Date & Time: All responses must be received no later than 21 December 2026, 4:00 PM EST. Late submissions may not be considered in the Government’s market research synthesis.

6. Government Review and Follow-Up

The Government reserves the right to review responses, contact respondents for clarifying discussions, and hold technical interchange sessions if deemed beneficial to the market research process. Information provided in response to this notice will be treated as informational and will be used to shape future acquisition strategies.

Files

Similar open opportunities

Opportunity Agency Set-aside Responses due
Slide assembly, rear S and 1 more item Land and Maritime No set-aside
Cocking Handle Assembly LT WT United States · NAICS 332994 Department of the Army Total Small Business
M240-pintle assembl Land and Maritime No set-aside
Barrel assembly, SHO and 1 more item Land and Maritime No set-aside
W912CH-27-R-A027 for BUTTSTOCK ASSEMBLY; NSN: 1005-01-576-8901 NAICS 332994 Department of the Army Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors