webbglide_roller_shade_specification_ipc2112rev2.pdf

WebbGlide Roller Shade

Specifications

Durable and cordless

Fingertip cordless operation

Exclusive privacy track that reduces light gap and adds stability for ease of operation

Easy to clean and maintain without removing

Innovative sleek design

Single or dual shade

Durable plastic or fabric valance

IPC.2112/REV.2

WebbGlide Roller Shade

Specifications

(with track)

(without track)

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Sunscreen roller shades.

B. Room darkening roller shades.

C. Room darkening and sunscreen double roller shades.

1.2 REFERENCES

A. ASTM G 21 - Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi.

B. NFPA 70 - National Electrical Code.

C. NFPA 701 - Fire Tests for Flame-Resistant Textiles and Films.

D. GREENGUARD - Indoor Air Quality Certi ed E. GREENGUARD Children & Schools - Indoor Air Quality Certi ed

1.3 SUSTAINABILITY REQUIREMENTS

A. Recycled Content:

1. Pre Consumer: Aluminum and cardboard

2. Post Consumer:

a. Solar Screen Fabric 100% recyclable

b. Aluminum roller tubes and mullions

c. Steel roller spring, center spring, fasteners and bracket plates

d. Plastic end tips, valance, end caps and track

e. Cardboard crates and boxes B. Low Emitting Materials

1. GREENGUARD - Indoor Air Quality Certi ed

2. GREENGUARD Children & Schools - Indoor Air Quality Certi ed C. Optimized Energy Performance

1. Solar screen fabric blocks more than 80% of solar heat and 98% of harmful UV rays, lowering indoor temperatures and reducing glare.

1.4 SUBMITTALS

A. Submit under provisions of Section 01300.

B. Manufacturer’s data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Styles, material descriptions, dimensions of individual components, pro les, features, nishes and operating instructions.

3. Storage and handling requirements and recommendations.

4. Mounting details and installation methods.

C. Shop Drawings: Plans, elevations, sections, product details, installation details, operational clearances, and relationship to adjacent work.

D. Window Treatment Schedule: For all roller shades. Use same room designations as indicated on the Drawings and include opening sizes and key to typical mounting details.

E. Selection Samples: For each nish product speci ed, one set of shade cloth options and nish color samples representing manufacturer’s full range of available colors and patterns.

F. Veri cation Samples: Shadecloth sample and track nish sample as selected. Mark face of material to indicate interior faces.

G. Maintenance Data: Methods for maintaining roller shades, precautions regarding cleaning materials and methods, instructions for operating hardware and controls.

1.5 QUALITY ASSURANCE

A. Manufacturer Quali cations: Obtain roller shades through one source from a single manufacturer with a minimum of twenty years experience in manufacturing products comparable to those speci ed in this section.

B. Installer Quali cations: Installer trained and certi ed by the manufacturer experienced in installing products comparable to those speci ed in this section.

C. Fire-Test-Response Characteristics:

Passes NFPA 701 small and large-scale vertical burn. Materials tested shall be identical to products proposed for use.

D. Anti-Microbial Characteristics: ‘No Growth’ per ASTM G 21 results for fungi

ATCC9642, ATCC 9644, ATCC9645.

E. Indoor Air Quality Components:

1. The GREENGUARD Indoor Air Quality Certi cation Program gives assurance that products designed for use in offi ce environments and other indoor spaces meet strict chemical emissions limits, which contribute to the creation of healthier interiors.

2. The GREENGUARD Children & Schools

- Indoor Air Quality Certi ed Products certi ed to this standard are also suitable for use in environments where children and others work, play or reside.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Deliver shades in factory-labeled packages, marked with manufacturer and product name, re- test-response characteristics, and location of installation using same room designations indicated on Drawings and in the Window Treatment Schedule.

B. PROJECT CONDITIONS

C. Environmental Limitations: Install roller shades after nish work including painting is complete and ambient temperature and humidity conditions are maintained at the levels indicated for Project when occupied for its intended use.

1.7 WARRANTY

A. Roller Shade Hardware: Manufacturer’s standard non-depreciating ten year limited warranty.

B. Standard Shadecloth: Manufacturer’s standard three year warranty.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Inpro P.O.

Box 406, Muskego, WI 53150; Tel: 800-222- 5556; Website: inpro.com B. Substitutions: Not permitted.

2.2 ROLLER SHADE TYPES

A. Manually Operated Cordless Shades:

1. Mounting: Surface mounted.

2. Mounting: Surface mounted with fascia.

3. Con guration: Single solar shadecloth.

4. Con guration: Single blackout shadecloth.

5. Con guration: Double solar and blackout shadecloth.

6. Solar Shadecloths:

a. Fabric: Select from manufacturer’s standard or special order options.

b. Fabric: Custom Printed Screen.

c. Color: Select from manufacturer’s standard colors.

7. Blackout Shadecloths:

a. Fabric: Select from manufacturer’s standard or special order options.

b. Fabric: Custom Printed Vinyl Scrim.

c. Color: Select from manufacturer’s standard colors.

2.3 SHADE BAND

A. Shade Bands: Construction of shade band includes the fabric, the hem weight, hem-pocket, shade roller tube, and the attachment of the shade band to the roller tube. Sewn hems are not acceptable.

1. Hem Pockets and Hem Weights: Fabric hem pocket with RF-welded seams and concealed hem weights. Hem weights shall be of appropriate size and weight for shade band. Hem weight shall be continuous inside the hem pocket. Hem pocket construction and hem weights shall be similar, for all shades within one room.

2. Shade Band and Shade Roller Attachment:

a. Use extruded aluminum shade roller tube of a diameter and wall thickness required to support shade fabric without excessive de ection. Roller tubes less than 1.55” (39.37 mm) in diameter for manual shades are not acceptable.

b. Provide for neutral mechanical engagement with drive/brake mechanism.

c. Provide for positive mechanical attachment of shade band to roller tube;

shade band shall be made removable / replaceable with 0.625” x 0.3125” extruded ABS guide slats.

2.4 SHADE FABRlCATlON

A. Fabricate units to completely ll existing openings from head to sill and jamb-to-jamb, unless speci cally indicated otherwise.

B. Fabricate shadecloth to hang at without buckling or distortion. Fabricate with trimmed edges to hang straight without curling or raveling.

C. Fabricate units for manual operation without the use of cords or chains using an internal lift spring completely contained within the shade roller tube.

D. For railroaded shadebands, provide seams in railroaded multi-width shadebands as required to meet size requirements and in accordance with seam alignment as acceptable to Architect. Seams shall be properly located.

2.5 COMPONENTS

A. Access and Material Requirements:

1. Provide shade hardware allowing for the removal of shade roller tube from brackets without removing hardware from opening and without requiring end or center supports to be removed.

2. Use only PVC/ABS with UV inhibitors or Styrene based plastics for all plastic components of shade hardware.

B. Manually Operated, Cordless WebbGlide Hardware and Shade Brackets

1. Shade Roller:

a. Tube: Provide extruded aluminum alloy 6061 or 6063, 1.75” diameter with exterior 0.15” x 0.84” slot for attaching shade fabric using 0625” x .3125” extruded ABS guide slats to provide horizontal adjustment of shade fabric while preventing removal of fabric after installation.

b. Lift Mechanism: Inner lift spring shall be constructed of blue spring steel. Drive pins shall be heat-treated 1” x .024” steel.

2. Bottom Rail:

a. Provide Bottom rail of proper size and weight to properly balance lifting mechanism. Bottom rail shall be 0.625”

od. steel tube, lightweight and corrosion resistant. It shall be applied to shade inside a bar-welded (radio-wave molecular bond) self-fabric pocket sized so the bottom rail shall slide smoothly and snugly inside. 0.375” od. steel rod shall be inserted into the tube acting as weight.

When side tracks are used, injection-molded thermoplastic guide tips shall be attached at each end with stainless steel compression springs and aluminum rivets, and shall t easily in side tracks to provide braking system for shade.

3. Bracket Plates:

a. Provide mounting bracket plates constructed of 18 gauge galvanized steel with embossed drive pin slots, and 0.25” x 0.562” nylon bushing inserts pressed into each idler pin aperture. Shall be corrosion resistant and will not buckle, bend or break under the shear forces created by the roller tension, shade material, or normal operation.

i. When fabric valance is used, each bracket shall have a lip for attachment.

4. Privacy Track (when used):

a. Provide vertical guide tracks extruded from PVC with UV inhibiting colorant, 1”x1” with anges on both sides to maintain privacy and reduce light leaks.

Tracks shall be attached using double-coated foam adhesive PSA tape.

C. Manually Operated Cordless Dual WebbGlide Shades

1. Shade Roller:

a. Tube: Provide extruded aluminum alloy 6061 or 6063, 1.75” diameter with exterior 0.15” x 0.84” slot for attaching shade fabric using 0625” x .3125” extruded ABS guide slats to provide horizontal adjustment of shade fabric while preventing removal of fabric after installation.

b. Lift Mechanism: Inner lift spring shall be constructed of .058” blue spring steel.

Drive pins shall be heat-treated 1” x .024” steel.

2. Bottom Rail:

a. Provide Bottom rail of proper size and weight to properly balance lifting mechanism. Bottom rail shall be 0.625”

od. steel tube, lightweight and corrosion resistant. It shall be applied to shade inside a bar-welded (radio-wave molecular bond) self-fabric pocket sized so the bottom rail shall slide smoothly and snugly inside.

0.375” od. steel rod shall be inserted into the tube acting as weight. When tracks are used, injection-molded thermoplastic guide tips shall be attached at each end with stainless steel compression springs and aluminum rivets, and shall t easily in side tracks to provide braking system for shade.

3. Bracket Plates:

a. Provide mounting bracket plates constructed of 18 gauge galvanized steel with two embossed drive pin slots, and two 0.25” x 0.562” nylon bushing inserts pressed into each idler pin aperture.

Drive pin slots and idle pin apertures shall be placed on bracket with proper spacing to allow continuous, independent operation of front and back shades.

Shall be corrosion resistant and will not buckle, bend or break under the shear forces created by the roller tension, shade material, or normal operation.

4. Shade Material:

a. Front shade (room side) fabric shall be blackout or privacy fabric of type, quality, weight, and color as speci ed by Architect.

Rear shade (window side) fabric shall be a light ltering fabric of color and openness as speci ed by Architect.

5. Provide hardware capable for installation of a removable fascia, for both regular and/or reverse roll, which shall be installed without exposed fastening devices of any kind.

2.6 ACCESSORIES

A. Valance:

1. Shall be continuous removable fabricated PVC, with UV inhibiting colorant, that attaches to 4” x 4.155”x0.5” molded PVC end caps without the use of adhesives, magnetic strips, or exposed fasteners for single shades only. The end caps are placed over 18 gauge galvanized steel mounting plates

OR

2. Shall be self-fabric made from the privacy or blackout fabric, attached to standard 0.75” x 1.5” wood headrail, 8” in length with bar-welded (not sewn) hem.

Returns, if required, shall have reinforced corners and can be attached to headboard with staples. Headboard shall be attached to lip on bracket plate using #8 x 0.5” stainless steel pan head screws for both single and dual shades.

PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

A. Install roller shades level, plumb, square, and true according to manufacturer’s written instructions. Allow proper clearances for window operation hardware.

B. Adjust and balance roller shades to operate smoothly, easily, safely, and free from binding or malfunction throughout entire operational range.

C. Clean roller shade surfaces after installation, according to manufacturer’s written instructions.

D. Engage Installer to train Owner’s maintenance personnel to adjust, operate and maintain roller shade systems.

3.4 PROTECTION

A. Protect installed products until completion of project.

B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION