Revised_Specs_Vol_2.pdf

Type B-3 Submittal

Specifications Vol 2 of 2, Rev 2

Security Forces and Communications Training Facility Francis S. Gabreski ANGB, Westhampton Beach, NY

WKVB109058

W9133L-15-D-0001-D211

Prepared For:

Prepared By:

3500 Parkway Lane, Suite 500

Peachtree Corners, Georgia 30092 678.336.7740 www.pondco.com

May 31, 2019 Pond Project No. 1170188

106th Rescue Wing

Francis S. Gabreski ANGB

Westhampton Beach, NY

This Page Intentionally Left Blank

Repl ace Secur i t y For ces and Communi cat i ons Tr ai ni ng Faci l i t y WKVB109058

PROJECT TABLE OF CONTENTS

DI VI SI ON 01 - GENERAL REQUI REMENTS

01 11 00 SUMMARY OF WORK

01 14 00 WORK RESTRI CTI ONS

01 20 00. 00 20 PRI CE AND PAYMENT PROCEDURES

01 30 00 ADMI NI STRATI VE REQUI REMENTS

01 32 01. 00 10 PROJECT SCHEDULE

01 33 00 SUBMI TTAL PROCEDURES

01 33 29 SUSTAI NABI LI TY REPORTI NG

01 35 26 GOVERNMENTAL SAFETY REQUI REMENTS

01 42 00 SOURCES FOR REFERENCE PUBLI CATI ONS

01 45 00. 00 10 QUALI TY CONTROL

01 45 35 SPECI AL I NSPECTI ONS

01 50 00 TEMPORARY CONSTRUCTI ON FACI LI TI ES AND CONTROLS

01 57 19 TEMPORARY ENVI RONMENTAL CONTROLS

01 74 19 CONSTRUCTI ON AND DEMOLI TI ON WASTE MANAGEMENT

01 78 00 CLOSEOUT SUBMI TTALS

01 78 23 OPERATI ON AND MAI NTENANCE DATA

DI VI SI ON 03 - CONCRETE

03 30 00 CAST- I N- PLACE CONCRETE

DI VI SI ON 04 - MASONRY

04 20 00 UNI T MASONRY

DI VI SI ON 05 - METALS

05 12 00 STRUCTURAL STEEL

05 21 00 STEEL JOI ST FRAMI NG

05 30 00 STEEL DECKS

05 40 00 COLD- FORMED METAL FRAMI NG

05 50 13 MI SCELLANEOUS METAL FABRI CATI ONS

05 51 00 METAL STAI RS

05 51 33 METAL LADDERS

05 52 00 METAL RAI LI NGS

DI VI SI ON 06 - WOOD, PLASTI CS, AND COMPOSI TES

06 10 00 ROUGH CARPENTRY

06 41 16. 00 10 PLASTI C- LAMI NATE- CLAD ARCHI TECTURAL CABI NETS

06 61 16 SOLI D SURFACI NG FABRI CATI ONS

DI VI SI ON 07 - THERMAL AND MOI STURE PROTECTI ON

07 05 23 PRESSURE TESTI NG AN AI R BARRI ER SYSTEM FOR AI R TI GHTNESS

07 13 53 ELASTOMERI C SHEET WATERPROOFI NG

07 21 13 BOARD AND BLOCK I NSULATI ON

07 21 16 MI NERAL FI BER BLANKET I NSULATI ON

07 22 00 ROOF AND DECK I NSULATI ON

07 27 10. 00 10 BUI LDI NG AI R BARRI ER SYSTEM

07 27 19. 01 SELF- ADHERI NG AI R BARRI ERS

07 27 26 FLUI D- APPLI ED MEMBRANE AI R BARRI ERS

07 27 36 SPRAY FOAM AI R BARRI ERS

07 42 15 ALUMI NUM SCREEN WALL, SOFFI TS AND ACCESSORI ES

07 42 63 COMPOSI TE ALUMI NUM PANEL ASSEMBLI ES

PROJECT TABLE OF CONTENTS Page 1

07 53 23 ETHYLENE- PROPYLENE- DI ENE- MONOMER ROOFI NG

07 60 00 FLASHI NG AND SHEET METAL

07 61 14. 00 20 STEEL STANDI NG SEAM ROOFI NG

07 84 00 FIRESTOPPING

07 92 00 JOI NT SEALANTS

DI VI SI ON 08 - OPENI NGS

08 11 13 STEEL DOORS AND FRAMES

08 11 16 ALUMI NUM DOORS AND FRAMES

08 14 00 WOOD DOORS

08 31 00 ACCESS DOORS AND PANELS

08 33 23 OVERHEAD COI LI NG DOORS

08 34 59 VAULT DOORS AND DAY GATES

08 34 73 SOUND CONTROL DOOR ASSEMBLI ES

08 41 13 ALUMI NUM- FRAMED ENTRANCES AND STOREFRONTS

08 44 00 CURTAI N WALL AND GLAZED ASSEMBLI ES

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

08 91 00 METAL WALL LOUVERS

DI VI SI ON 09 - FI NI SHES

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 29 00 GYPSUM BOARD

09 30 10 CERAMI C, QUARRY, AND GLASS TI LI NG

09 51 00 ACOUSTI CAL CEI LI NGS

09 65 00 RESI LI ENT FLOORI NG

09 65 66 RESI LI ENT ATHLETI C FLOORI NG

09 67 23. 13 STANDARD RESI NOUS FLOORI NG

09 68 00 CARPETING

09 69 13 RI GI D GRI D ACCESS FLOORI NG

09 90 00 PAI NTS AND COATI NGS

DI VI SI ON 10 - SPECI ALTI ES

10 11 00 VI SUAL DI SPLAY UNI TS

10 14 00. 20 I NTERI OR SI GNAGE

10 21 13 TOI LET COMPARTMENTS

10 22 13 WI RE MESH PARTI TI ONS

10 22 19 DEMOUNTABLE AND MOVABLE PARTI TI ONS

10 22 39 FOLDI NG PANEL PARTI TI ONS

10 26 00 WALL AND DOOR PROTECTI ON

10 28 13 TOI LET ACCESSORI ES

10 51 13 METAL LOCKERS

10 73 00 PRE- MANUFACTURED ALUMI NUM CANOPI ES

10 74 00 ALUMI NUM SUNSHADE DEVI CES

DI VI SI ON 11 - EQUI PMENT

11 81 29 FACI LI TY FALL PROTECTI ON

DI VI SI ON 12 - FURNI SHI NGS

12 24 13 ROLLER WI NDOW SHADES

12 93 00 SI TE FURNI SHI NGS

DI VI SI ON 14 - CONVEYI NG EQUI PMENT

PROJECT TABLE OF CONTENTS Page 2

14 24 23 HYDRAULI C PASSENGER ELEVATORS

DI VI SI ON 21 - FI RE SUPPRESSI ON

21 13 13. 00 10 WET PI PE SPRI NKLER SYSTEM, FI RE PROTECTI ON

DI VI SI ON 22 - PLUMBI NG

22 00 00 PLUMBI NG, GENERAL PURPOSE

DI VI SI ON 23 - HEATI NG, VENTI LATI NG, AND AI R CONDI TI ONI NG ( HVAC)

23 00 00 AI R SUPPLY, DI STRI BUTI ON, VENTI LATI ON, AND EXHAUST SYSTEMS

23 05 93 TESTI NG, ADJUSTI NG, AND BALANCI NG FOR HVAC

23 07 00 THERMAL I NSULATI ON FOR MECHANI CAL SYSTEMS

23 09 23. 13 20 BACnet DI RECT DI GI TAL CONTROL SYSTEMS FOR HVAC

23 11 25 FACI LI TY GAS PI PI NG

23 21 13. 00 20 LOW TEMPERATURE WATER ( LTW) HEATI NG SYSTEM

23 23 00 REFRI GERANT PI PI NG

23 52 00 HEATI NG BOI LERS

23 81 23. 00 20 COMPUTER ROOM AI R CONDI TI ONI NG UNI TS

23 82 00. 00 20 TERMI NAL HEATI NG UNI TS

23 82 02. 00 10 UNI TARY HEATI NG AND COOLI NG EQUI PMENT

DI VI SI ON 26 - ELECTRI CAL

26 00 00. 00 20 BASI C ELECTRI CAL MATERI ALS AND METHODS

26 20 00 I NTERI OR DI STRI BUTI ON SYSTEM

26 24 13 SWITCHBOARDS

26 28 01. 00 10 COORDI NATED POWER SYSTEM PROTECTI ON

26 29 23 VARI ABLE FREQUENCY DRI VE SYSTEMS UNDER 600 VOLTS

26 32 14. 00 10 DI ESEL- GENERATOR SET, STATI ONARY 15- 300 KW, STANDBY

APPLICATIONS

26 36 00. 00 10 AUTOMATI C TRANSFER SWI TCH AND BY- PASS/ I SOLATI ON SWI TCH

26 41 00 LI GHTNI NG PROTECTI ON SYSTEM

26 51 00 I NTERI OR LI GHTI NG

26 56 00 EXTERI OR LI GHTI NG

DI VI SI ON 27 - COMMUNI CATI ONS

27 05 14. 00 10 CABLE TELEVI SI ON PREMI SES DI STRI BUTI ON SYSTEM

27 10 00 BUI LDI NG TELECOMMUNI CATI ONS CABLI NG SYSTEM

27 54 00. 00 20 COMMUNI TY ANTENNA TELEVI SI ON ( CATV) SYSTEMS

DI VI SI ON 28 - ELECTRONI C SAFETY AND SECURI TY

28 31 76 I NTERI OR FI RE ALARM AND MASS NOTI FI CATI ON SYSTEM

DI VI SI ON 31 - EARTHWORK

31 00 00 EARTHWORK

31 31 16. 13 CHEMI CAL TERMI TE CONTROL

DI VI SI ON 32 - EXTERI OR I MPROVEMENTS

32 11 20 BASE COURSE FOR RI GI D PERVI OUS PAVI NG

32 11 23 AGGREGATE BASE COURSES

32 12 13 BI TUMI NOUS TACK AND PRI ME COATS

32 12 16 HOT- MI X ASPHALT ( HMA) FOR ROADS

PROJECT TABLE OF CONTENTS Page 3

32 13 43 PERVI OUS CONCRETE PAVI NG

32 16 13 CONCRETE SI DEWALKS AND CURBS

32 17 23 PAVEMENT MARKI NGS

32 31 13 CHAI N LI NK FENCES AND GATES

32 92 19 SEEDING

32 92 23 SODDING

DI VI SI ON 33 - UTI LI TI ES

33 11 00 WATER UTI LI TY DI STRI BUTI ON PI PI NG

33 30 00 SANI TARY SEWERS

33 40 00 STORM DRAI NAGE UTI LI TI ES

33 71 02 UNDERGROUND ELECTRI CAL DI STRI BUTI ON

33 82 00 TELECOMMUNI CATI ONS OUTSI DE PLANT ( OSP)

- - End of Pr oj ect Tabl e of Cont ent s - -

PROJECT TABLE OF CONTENTS Page 4

SECTI ON 10 11 00

VI SUAL DI SPLAY UNI TS

08/17

PART 1 GENERAL

1. 1 DEFI NI TI ONS OR ADMI NI STRATI VE REQUI REMENTS

The t er m vi sual di spl ay boar d when used her ei n i ncl udes pr esent at i on boar ds, mar ker boar ds, t ackboar ds, boar d cases, di spl ay t r ack syst em and hor i zont al s l i di ng uni t s; submi t manuf act ur er ' s descr i pt i ve dat a and cat al og cut s pl us manuf act ur er ' s i nst al l at i on i nst r uct i ons, and cl eani ng and mai nt enance i nst r uct i ons. Vi sual di spl ay boar ds must be f r om manuf act ur er ' s st andar d pr oduct l i ne. Submi t cer t i f i cat e of compl i ance si gned by Cont r act or at t est i ng t hat v i sual di spl ay boar ds conf or m t o t he r equi r ement s speci f i ed.

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance t o Section 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 03 Pr oduct Dat a

Vi sual Di spl ay Boar d; G

Pr oj ect i on Scr een; G

SD- 04 Sampl es

Aluminum ; G

Por cel ai n Enamel ; G

Materials ; G

SD- 07 Cer t i f i cat es

I ndoor ai r qual i t y f or mar ker boar ds; S

I ndoor ai r qual i t y f or t ackboar ds; S

I ndoor ai r qual i t y f or pr oj ect i on scr een; S

1. 3 CERTIFICATIONS

1. 3. 1 I ndoor Ai r Qual i t y

1. 4 DELI VERY, STORAGE, AND HANDLI NG

Del i ver mat er i al s t o t he bui l di ng s i t e i n t he manuf act ur er ' s or i gi nal

SECTI ON 10 11 00 Page 1 unopened cont ai ner s and st or e t hem i n a c l ean dr y ar ea wi t h t emper at ur e mai nt ai ned above 50 degr ees F. St ack mat er i al s accor di ng t o manuf act ur er ' s r ecommendat i ons. Vi sual di spl ay boar ds must be al l owed t o accl i mat e t o t he bui l di ng t emper at ur e f or 24 hour s pr i or t o i nst al l at i on.

1. 5 WARRANTY

Pr ovi de manuf act ur er ' s st andar d per f or mance guar ant ees or war r ant i es t hat ext end beyond a one year per i od.

PART 2 PRODUCTS

2. 1 PROJECTI ON SCREEN

Recessed mount mot or i zed pr oj ect i on scr een must have 120V mot or t hat i s l ubr i cat ed f or l i f e, qui ck r ever sal t ype, has over l oad pr ot ect or , i nt egr al gear s, and pr eset accessi bl e l i mi t swi t ches. Recessed mount pr oj ect i on scr eens must have an oper abl e c l osur e door and access panel . Scr een must be f l ame r et ar dant , mi l dew r esi st ant , and wi t h whi t e maski ng bor der s.

Bot t om of scr een f abr i c must be wei ght ed wi t h met al r od. Rol l er must be a r i gi d met al at l east 5 i nches i n di amet er mount ed on sound absor bi ng suppor t s. Mot or wi l l be end mount ed or mot or - i n- r ol l er desi gn. Scr een must have a 3 posi t i on cont r ol swi t ch t o st op or r ever se scr een at any poi nt . The swi t ch must be i nst al l ed i n a f l ush el ect r i cal box wi t h cover pl at e, l ocat i on( s) as shown on t he el ect r i cal dr awi ngs. Al l condui t and wi r i ng f r om t he cont r ol swi t ch t o t he pr oj ect i on scr een must be f ur ni shed and i nst al l ed by t he Cont r act or . Cei l i ng r ecessed case must be ext r uded al umi num. Scr een must be UL l i s t ed. The si ze must be a mi ni mum of 72" x 108" . Pr ovi de pr oj ect i on scr eens t hat meet t he emi ssi ons r equi r ement s of CDPH SECTI ON 01350 ( l i mi t r equi r ement s f or ei t her of f i ce or c l assr oom spaces r egar dl ess of space t ype) .

Pr ovi de cer t i f i cat i on or val i dat i on of i ndoor ai r qual i t y f or pr oj ect i on screen s.

2. 2 COLOR

Fi ni sh col or s f or r equi r ed i t ems must be as i ndi cat ed.

PART 3 EXECUTI ON

3. 1 PLACEMENT SCHEDULE

Locat i on and mount i ng hei ght of v i sual di spl ay boar ds must be as shown on t he dr awi ngs.

Mount i ng hei ght i s def i ned as di st ance f r om f i ni shed f l oor t o t op of t he di spl ay boar d f r ame.

3. 2 INSTALLATION

Do not i nst al l i t ems t hat show vi sual evi dence of bi ol ogi cal gr owt h.

Per f or m i nst al l at i on and assembl y i n accor dance wi t h manuf act ur er ' s pr i nt ed i nst r uct i ons. Use conceal ed f ast ener s. Vi sual di spl ay boar ds must be at t ached t o t he wal l s wi t h sui t abl e devi ces t o anchor each uni t . f ur ni sh and i nst al l t r i m i t ems, accessor i es and mi scel l aneous i t ems i n t ot al , i ncl udi ng but not l i mi t ed t o har dwar e, gr ounds, c l i ps, backi ng mat er i al s, adhesi ves, br acket s, and anchor ages i nci dent al t o or necessar y f or a sound, secur e, compl et e and f i ni shed i nst al l at i on. I nst al l at i on must not be i ni t i at ed unt i l compl et i on of r oom pai nt i ng and f i ni shi ng oper at i ons.

SECTI ON 10 11 00 Page 2

Vi sual di spl ay boar ds must be i nst al l ed i n l ocat i ons and at mount i ng hei ght s i ndi cat ed. Vi sual di spl ay boar ds must be i nst al l ed l evel and pl umb, and i f appl i cabl e door s must be al i gned and har dwar e must be adj ust ed. Damaged uni t s must be r epai r ed or r epl aced as di r ect ed by t he Cont r act i ng Of f i cer .

3. 3 CLEANING

Wr i t i ng sur f aces must be c l eaned i n accor dance wi t h manuf act ur er ' s instructions.

- - End of Sect i on - -

SECTI ON 10 11 00 Page 3

SECTI ON 10 14 00. 20

I NTERI OR SI GNAGE

08/17

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by basi c desi gnat i on onl y.

AMERI CAN NATI ONAL STANDARDS I NSTI TUTE ( ANSI )

ANSI Z97. 1 ( 2015) Saf et y Gl azi ng Mat er i al s Used i n Bui l di ngs - Saf et y Per f or mance Speci f i cat i ons and Met hods of Test

I NTERNATI ONAL CODE COUNCI L ( I CC)

I CC A117. 1 COMM ( 2009) St andar d And Comment ar y and Usabl e Bui l di ngs and Faci l i t i es

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 101 ( 2015; ERTA 2016) Li f e Saf et y Code

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

36 CFR 1191 Amer i cans wi t h Di sabi l i t i es Act ( ADA) Accessi bi l i t y Gui del i nes f or Bui l di ngs and Faci l i t i es; Ar chi t ect ur al Bar r i er s Act ( ABA) Accessi bi l i t y Gui del i nes

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t al s wi t h an " S" ar e f or i ncl us i on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG.

Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL

PROCEDURES:

SD- 02 Shop Dr awi ngs

Det ai l Dr awi ngs; G

SD- 03 Pr oduct Dat a

Installation ; G

Warranty ; G

SD- 04 Sampl es

SECTI ON 10 14 00. 20 Page 1

I nt er i or Si gnage; G

SD- 10 Oper at i on and Mai nt enance Dat a

Appr oved Manuf act ur er ' s I nst r uct i ons; G

Pr ot ect i on and Cl eani ng; G

1. 3 EXTRA MATERI ALS

Provide 5% ext r a f r ames and ext r a st ock of t he f ol l owi ng: bl ank pl at es of each col or and s i ze f or s i gn t ypes changeabl e message st r i ps f or s i gn t ype.

1. 4 QUALI TY ASSURANCE

1. 4. 1 Samples

Submit i nt er i or s i gnage sampl es of each of t he f ol l owi ng s i gn t ypes showi ng t ypi cal qual i t y , wor kmanshi p and col or : Di r ect i onal s i gn, St andar d Room si gn, Changeabl e message st r i p s i gn. The sampl es may be i nst al l ed i n t he wor k, pr ovi ded each sampl e i s i dent i f i ed and l ocat i on r ecor ded.

1. 4. 2 Det ai l Dr awi ngs

Submi t det ai l dr awi ngs showi ng el evat i ons of each t ype of s i gn, di mensi ons, det ai l s and met hods of mount i ng or anchor i ng, mount i ng hei ght , shape and t hi ckness of mat er i al s, and det ai l s of const r uct i on. I ncl ude a schedul e showi ng t he l ocat i on, each si gn t ype, and message.

1. 5 DELI VERY, STORAGE, AND HANDLI NG

Mat er i al s must be packaged t o pr event damage and det er i or at i on dur i ng shi pment , handl i ng, st or age and i nst al l at i on. Pr oduct must be del i ver ed t o t he j obsi t e i n manuf act ur er ' s or i gi nal packagi ng and st or ed i n a c l ean, dr y ar ea i n accor dance wi t h manuf act ur er ' s i nst r uct i ons.

1. 6 WARRANTY

War r ant t he i nt er i or s i gnage f or a per i od of 2 year s agai nst def ect i ve wor kmanshi p and mat er i al . War r ant i es must be s i gned by t he aut hor i zed r epr esent at i ve of t he manuf act ur er . Submi t war r ant y accompani ed by t he document aut hent i cat i ng t he s i gner as an aut hor i zed r epr esent at i ve of t he guar ant or . Guar ant ee t hat t he s i gnage pr oduct s and t he i nst al l at i on ar e f r ee f r om any def ect s i n mat er i al and wor kmanshi p f r om t he dat e of del i ver y.

PART 2 PRODUCTS

2. 1 STANDARD PRODUCTS

Si gns, pl aques, di r ect or i es, and di mensi onal l et t er s must be t he st andar d pr oduct of a manuf act ur er r egul ar l y engaged i n t he manuf act ur e of such pr oduct s t hat essent i al l y dupl i cat e s i gns t hat have been i n sat i sf act or y use at l east 2 year s pr i or t o bi d openi ng. Obt ai n s i gnage f r om a s i ngl e manuf act ur er wi t h edges and cor ner s of f i ni shed l et t er f or ms and gr aphi cs t r ue and cl ean.

SECTI ON 10 14 00. 20 Page 2

2. 2 ROOM I DENTI FI CATI ON/ DI RECTI ONAL SI GNAGE SYSTEM

2. 2. 1 St andar d Room Si gns

Si gns must consi st of acr y l i c pl ast i c 0. 080 i nch t hi ckness mi ni mum conf or mi ng t o ANSI Z97. 1 and must conf or m t o t he f ol l owi ng:

a. Uni t s must be f r amel ess. Cor ner s of s i gns must be squar ed.

2. 2. 2 Changeabl e Message St r i p Si gns

Changeabl e message st r i p s i gns must be of same const r uct i on as st andar d r oom si gns t o i ncl ude a c l ear s l eeve t hat wi l l accept a paper or pl ast i c i nser t i dent i f y i ng changeabl e t ext . The i nser t must be pr epar ed t ypeset message mount ed on paper car d st ock . Pr ovi de paper and sof t war e f or cr eat i ng t ext and symbol s f or comput er s i dent i f i ed by owner f or Owner pr oduct i on of paper i nser t s af t er pr oj ect compl et i on. Sl i di ng i nser t s or s l i de knobs t hat s l i de hor i zont al l y exposi ng di f f er ent gr aphi c i nf or mat i on must be pr ovi ded as i dent i f i ed i n t he s i gnage pl acement schedul e and drawings

2. 2. 3 Type of Mount i ng For Si gns

Pr ovi de ext r uded al umi num br acket s f or hangi ng, pr oj ect i ng, and doubl e- s i ded si gns. Mount i ng f or f r amed, hangi ng, and pr oj ect i ng s i gns must be by mechani cal f ast ener s. Sur f ace mount ed s i gns must be mount ed wi t h count er sunk mount i ng hol es i n pl aques and mount i ng scr ews. Adhesi ve must be t r anspar ent , l ong agi ng, hi gh t ech f or mul at i on on t wo si des of t he v i nyl f oam. Fabr i cat ed f r om mat er i al s t hat ar e not cor r osi ve t o s i gn mat er i al and mount i ng sur f ace.

2. 2. 4 Char act er Pr opor t i ons and Hei ght s

Let t er s and number s on s i gns conf or m t o 36 CFR 1191.

2. 2. 5 Tact i l e Let t er s, Symbol s and Br ai l l e

Rai sed l et t er s and number s on s i gns must conf or m t o 36 CFR 1191.

2. 3 STAI R SI GNAGE

Pr ovi de s i gns on st ai r s ser vi ng t hr ee or mor e st or i es wi t h speci al s i gnage wi t hi n t he encl osur e at each f l oor l andi ng conf or mi ng t o NFPA 101.

I ndi cat e t he f l oor l evel , t he t er mi nus of t he t op and bot t om of t he st ai r encl osur e, and t he i dent i f i cat i on of t he st ai r encl osur e. Al so, st at e t he f l oor l evel of , and t he di r ect i on t o, exi t di schar ge. Locat e t he s i gnage i nsi de t he encl osur e i n a posi t i on t hat i s v i s i bl e when t he door i s i n t he open or c l osed posi t i on and i nst al l i n conf or mance wi t h 36 CFR 1191. The f l oor l evel desi gnat i on must al so be t act i l e i n accor dance wi t h

I CC A117. 1 COMM.

2. 4 BUI LDI NG DI RECTORI ES

Bui l di ng di r ect or i es must be l obby di r ect or i es or f l oor di r ect or i es, and must be pr ovi ded wi t h a changeabl e di r ect or y l i s t i ng consi st i ng of t he ar eas, of f i ces and per sonnel l ocat ed wi t hi n t he f aci l i t y . Di mensi ons, det ai l s , and mat er i al s of s i gn and message cont ent must be as shown on t he s i gnage pl acement schedul e.

SECTI ON 10 14 00. 20 Page 3

2. 5 COLOR, FI NI SH, AND CONTRAST

Col or must be i n accor dance wi t h Ar chi t ect ur al Dr awi ngs, Si gnage Pl an, Det ai l s and Schedul e. Fi ni sh of al l s i gns must be eggshel l , mat t e, or ot her non- gl ar e f i ni sh as r equi r ed i n handi capped- accessi bl e bui l di ngs.

2. 6 TYPEFACE

ADA- ABA compl i ant f ont f or Room Si gns.

PART 3 EXECUTI ON

3. 1 INSTALLATION

Si gns must be i nst al l ed pl umb and t r ue and i n accor dance wi t h approved manuf act ur er ' s i nst r uct i ons at l ocat i ons shown on t he det ai l dr awi ngs.

Submi t s i x copi es of oper at i ng i nst r uct i ons out l i ni ng t he st ep- by- st ep pr ocedur es r equi r ed f or syst em oper at i on. The i nst r uct i ons must i ncl ude si mpl i f i ed di agr ams f or t he syst em as i nst al l ed, t he manuf act ur er ' s name, model number , ser vi ce manual , par t s l i s t , and br i ef descr i pt i on of al l equi pment and t hei r basi c oper at i ng f eat ur es. Each set must be per manent l y bound and must have a har d cover . The f ol l owi ng i dent i f i cat i on must be i nscr i bed on t he cover s: t he wor ds " OPERATI NG AND MAI NTENANCE I NSTRUCTI ONS" , name and l ocat i on of t he f aci l i t y , name of t he Cont r act or , and cont r act number . Mount i ng hei ght and mount i ng l ocat i on must conf or m t o 36 CFR 1191. Requi r ed bl ocki ng must be i nst al l ed. Si gns on door s or ot her sur f aces must not be i nst al l ed unt i l f i ni shes on such sur f aces have been i nst al l ed. Si gns i nst al l ed on gl ass sur f aces must be i nst al l ed wi t h mat chi ng bl ank back- up pl at es i n accor dance wi t h manuf act ur er ' s i nst r uct i ons.

Do not i nst al l i t ems t hat show vi sual evi dence of bi ol ogi cal gr owt h.

3. 1. 1 Anchorage

Anchor age must be i n accor dance wi t h appr oved manuf act ur er ' s i nst r uct i ons.

Anchor age not ot her wi se speci f i ed or shown must i ncl ude sl ot t ed i nser t s, expansi on shi el ds, and powder - dr i ven f ast ener s when appr oved f or concr et e;

t oggl e bol t s and t hr ough bol t s f or masonr y; machi ne car r i age bol t s f or st eel ; l ag bol t s and scr ews f or wood. Exposed anchor and f ast ener mat er i al s must be compat i bl e wi t h met al t o whi ch appl i ed and must have mat chi ng col or and f i ni sh.

a. Si gns mount ed t o pai nt ed gypsum boar d sur f aces must be r emovabl e f or pai nt i ng mai nt enance.

b. Mount s i gns mount ed t o l ay- i n cei l i ng gr i ds wi t h c l i p connect i ons t o cei l i ng t ees.

c. I nst al l s i gns mount ed on met al sur f aces wi t h magnet i c t ape.

d. I nst al l s i gns mount ed on f abr i c sur f aces wi t h hook and l oop t ape or pi n mount.

3. 1. 2 Pr ot ect i on and Cl eani ng

Pr ot ect t he wor k agai nst damage dur i ng const r uct i on. Har dwar e and el ect r i cal equi pment must be adj ust ed f or pr oper oper at i on. Gl ass, f r ames, SECTI ON 10 14 00. 20 Page 4 and ot her s i gn sur f aces must be c l eaned at compl et i on of s i gn i nst al l at i on i n accor dance wi t h t he manuf act ur er ' s appr oved i nst r uct i ons and t he r equi r ement s of Sect i on 01 78 23 OPERATI ON AND MAI NTENANCE DATA, Package

1. Submi t s i x copi es of mai nt enance i nst r uct i ons l i s t i ng r out i ne pr ocedur es, r epai r s, and gui des.

SECTI ON 10 14 00. 20 Page 5

SECTI ON 10 21 13

TOI LET COMPARTMENTS

08/17

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ALUMI NUM ASSOCI ATI ON ( AA)

AA DAF45 ( 2003; Reaf f i r med 2009) Desi gnat i on Syst em f or Al umi num Fi ni shes

ASTM I NTERNATI ONAL ( ASTM)

ASTM A123/ A123M ( 2015) St andar d Speci f i cat i on f or Zi nc ( Hot - Di p Gal vani zed) Coat i ngs on I r on and St eel Pr oduct s

ASTM A167 ( 2011) St andar d Speci f i cat i on f or St ai nl ess and Heat - Resi st i ng Chr omi um- Ni ckel St eel Pl at e, Sheet , and Strip

ASTM A336/ A336M ( 2015) St andar d Speci f i cat i on f or Al l oy St eel For gi ngs f or Pr essur e and Hi gh- Temper at ur e Par t s

ASTM A385/ A385M ( 2011) St andar d Pr act i ce f or Pr ovi di ng Hi gh- Qual i t y Zi nc Coat i ngs ( Hot - Di p)

ASTM A653/ A653M ( 2015; E 2016) St andar d Speci f i cat i on f or St eel Sheet , Zi nc- Coat ed ( Gal vani zed) or Zi nc- I r on Al l oy- Coat ed ( Gal vanneal ed) by t he Hot - Di p Pr ocess

ASTM B221 ( 2014) St andar d Speci f i cat i on f or Al umi num and Al umi num- Al l oy Ext r uded Bar s, Rods, Wi r e, Pr of i l es, and Tubes

ASTM B36/ B36M ( 2013) St andar d Speci f i cat i on f or Br ass Pl at e, Sheet , St r i p, and Rol l ed Bar

ASTM B456 ( 2011; E 2011) St andar d Speci f i cat i on f or El ect r odeposi t ed Coat i ngs of Copper Pl us Ni ckel Pl us Chr omi um and Ni ckel Pl us Chromium

ASTM B86 ( 2013) St andar d Speci f i cat i on f or Zi nc and Zi nc- Al umi num ( ZA) Al l oy Foundr y and Di e Castings

SECTI ON 10 21 13 Page 1

ASTM D6386 ( 2016) St andar d Pr act i ce f or Pr epar at i on of Zi nc ( Hot - Di p Gal vani zed) Coat ed I r on and St eel Pr oduct and Har dwar e Sur f aces f or Pai nt i ng

CALI FORNI A DEPARTMENT OF PUBLI C HEALTH ( CDPH)

CDPH SECTI ON 01350 St andar d Met hod f or t he Test i ng and Eval uat i on of Vol at i l e Or gani c Chemi cal Emi ssi ons f r om I ndoor Sour ces usi ng Envi r onment al Chamber s

I NTERNATI ONAL CODE COUNCI L ( I CC)

I CC A117. 1 COMM ( 2009) St andar d And Comment ar y and Usabl e Bui l di ngs and Faci l i t i es

SCI ENTI FI C CERTI FI CATI ON SYSTEMS ( SCS)

SCS SCS Gl obal Ser vi ces ( SCS) I ndoor Advant age

SOCI ETY OF AUTOMOTI VE ENGI NEERS I NTERNATI ONAL ( SAE)

SAE AMS2460 ( 2013; Rev A) Pl at i ng, Chr omi um

U. S. GENERAL SERVI CES ADMI NI STRATI ON ( GSA)

CI D A- A- 60003 ( Basi c) Par t i t i ons, Toi l et , Compl et e

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

36 CFR 1191 Amer i cans wi t h Di sabi l i t i es Act ( ADA) Accessi bi l i t y Gui del i nes f or Bui l di ngs and Faci l i t i es; Ar chi t ect ur al Bar r i er s Act ( ABA) Accessi bi l i t y Gui del i nes

UNDERWRI TERS LABORATORI ES ( UL)

UL 2818 ( 2013) GREENGUARD Cer t i f i cat i on Pr ogr am For Chemi cal Emi ssi ons For Bui l di ng Mat er i al s, Fi ni shes And Fur ni shi ngs

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t al s wi t h an " S" ar e f or i ncl us i on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG.

Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL

PROCEDURES:

SD- 02 Shop Dr awi ngs

Fabr i cat i on Dr awi ngs

I nst al l at i on Dr awi ngs; G

SECTI ON 10 21 13 Page 2

SD- 03 Pr oduct Dat a

Cl eani ng and Mai nt enance I nst r uct i ons

Col or s And Fi ni shes

Gal vani zed St eel Sheet

Sound- Deadeni ng Cor es

Anchor i ng Devi ces and Fast ener s

Har dwar e and Fi t t i ngs

Brackets

Door Har dwar e

Pi l ast er Shoes

Finishes ; G

Toi l et Encl osur es

Ur i nal Scr eens

SD- 04 Sampl es

Col or s and Fi ni shes; G

Har dwar e and Fi t t i ngs

Anchor i ng Devi ces and Fast ener s

SD- 07 Cer t i f i cat es

Warranty

I ndoor Ai r Qual i t y

SD- 11 Cl oseout Submi t t al s

I ndoor ai r qual i t y f or sol i d phenol i c, bl ack cor e par t i t i ons and screens ; S

1. 3 CERTIFICATIONS

1. 3. 1 I ndoor Ai r Qual i t y

1. 3. 1. 1 Lami nat ed Pl ast i c and Sol i d Phenol i c Pr oduct s

Pr ovi de pr oduct s cer t i f i ed t o meet i ndoor ai r qual i t y r equi r ement s by UL 2818 ( Gr eenguar d) Gol d, SCS Gl obal Ser vi ces I ndoor Advant age Gol d or pr ovi de cer t i f i cat i on or val i dat i on by ot her t hi r d- par t y pr ogr am t hat pr oduct s meet t he r equi r ement s of t hi s Sect i on. Pr ovi de cur r ent pr oduct cer t i f i cat i on document at i on f r om cer t i f i cat i on body.

SECTI ON 10 21 13 Page 3

1. 4 REGULATORY REQUI REMENTS

Conf or m t o I CC A117. 1 COMM code f or access f or t he handi capped oper at i on of t oi l et compar t ment door and har dwar e.

1. 5 DELI VERY, STORAGE, AND HANDLI NG

Del i ver mat er i al s i n t he manuf act ur er ' s or i gi nal unopened packages wi t h t he br and, i t em i dent i f i cat i on, and pr oj ect r ef er ence cl ear l y mar ked. St or e component s i n a dr y l ocat i on t hat i s adequat el y vent i l at ed; f r ee f r om dust , wat er , ot her cont ami nant s, and damage dur i ng del i ver y, st or age, and construction.

1. 6 WARRANTY

Pr ovi de cer t i f i cat i on or war r ant i es t hat t oi l et par t i t i ons wi l l be f r ee of def ect s i n mat er i al s, f abr i cat i on, f i ni sh, and i nst al l at i on and wi l l r emai n so f or a per i od of not l ess t han 2 year s af t er compl et i on.

PART 2 PRODUCTS

2. 1 SYSTEM REQUI REMENTS

Pr ovi de a compl et e and usabl e t oi l et par t i t i on syst em, i ncl udi ng t oi l et encl osur es, r oom ent r ance scr eens, ur i nal scr eens, syst em of panel s, har dwar e, and suppor t component s. Fur ni sh t he par t i t i on syst em f r om a s i ngl e manuf act ur er , wi t h a st andar d pr oduct as shown i n t he most r ecent cat al og dat a. Submi t Fabr i cat i on Dr awi ngs f or met al t oi l et par t i t i ons and ur i nal scr eens consi st i ng of f abr i cat i on and assembl y det ai l s t o be per f or med i n t he f act or y. Submi t manuf act ur er ' s Cl eani ng and Mai nt enance Instructions wi t h Fabr i cat i on Dr awi ngs f or r evi ew.

2. 2 MATERIALS

2. 2. 1 Gal vani zed St eel Sheet

Pr ovi de gal vani zed st eel sheet col d- r ol l ed, st r et cher - l evel , commer ci al qual i t y mat er i al , conf or mi ng t o ASTM A653/ A653M. Conf or m sur f ace pr epar at i on of mat er i al f or pai nt i ng t o ASTM D6386, Met hod A.

2. 2. 2 Sound- Deadeni ng Cor es

Pr ovi de sound deadeni ng consi st i ng of t r eat ed kr af t paper honeycomb cor es wi t h a cel l s i ze of not mor e t han 1 i nch. Resi n- mat er i al cont ent must wei gh not l ess t han 11 per cent of t he f i ni shed cor e wei ght . Expanded cor es must be f aced on bot h s i des wi t h kr af t paper .

2. 2. 3 Anchor i ng Devi ces and Fast ener s

Pr ovi de st eel anchor i ng devi ces and f ast ener s hot - di pped gal vani zed af t er f abr i cat i on, i n conf or mance wi t h ASTM A385/ A385M and ASTM A123/ A123M.

Conceal al l gal vani zed anchor i ng devi ces.

2. 2. 4 Brackets

Wal l br acket s must be cont i nuous S. S. br acket s, T- st y l e, 1- i nch st ock.

Pr ovi de st i r r up st y l e panel - t o- pi l ast er br acket s.

SECTI ON 10 21 13 Page 4

2. 2. 5 Har dwar e and Fi t t i ngs

2. 2. 5. 1 Gener al Requi r ement s

Conf or m har dwar e f or t he t oi l et par t i t i on syst em t o CI D A- A- 60003 f or t he speci f i ed t ype and st y l e of par t i t i ons. Pr ovi de har dwar e f i ni sh hi ghl y r esi st ant t o al kal i s , ur i ne, and ot her common t oi l et r oom aci ds. Compl y l at chi ng devi ces and hi nges f or handi cap compar t ment s wi t h 36 CFR 1191;

pr ovi de st ai nl ess st eel devi ces and hi nges wi t h door l at ches t hat oper at e wi t hout ei t her t i ght gr aspi ng or t wi st i ng of t he wr i st of t he oper at or .

Submi t t hr ee sampl es of each i t em, i ncl udi ng anchor i ng devi ces and f ast ener s. Appr oved har dwar e sampl es may be i nst al l ed i n t he wor k i f pr oper l y i dent i f i ed.

Material Conf or mance St andar d

Col d- r ol l ed sheet st eel ASTM A336/ A336M, commer ci al qual i t y

Zi nc- base al l oy ASTM B86, Al l oy AC41- A

Brass ASTM B36/ B36M, Al l oy C26800

Aluminum ASTM B221

Cor r osi on- r esi st ant st eel ASTM A167, Type 302 304

2. 2. 5. 2 Finishes

a. Chr ome pl at i ng must conf or m t o ASTM B456.

b. Fi ni sh must conf or m t o SAE AMS2460, Cl ass I , Type I I .

c. Al umi num must have a c l ear anodi c coat i ng conf or mi ng t o AA DAF45.

d. Cor r osi on- r esi st ant st eel must have a No. 4 f i ni sh.

e. Exposed f ast ener s must mat ch t he har dwar e and f i t t i ngs.

2. 2. 6 Door Har dwar e

2. 2. 6. 1 Hinges

Hi nges must be adj ust abl e t o hol d i n- swi ngi ng door s open at any angl e up t o 90 degr ees and out swi ngi ng door s t o 10 degr ees. Pr ovi de sel f - l ubr i cat i ng hi nges wi t h t he i ndi cat ed swi ng. Hi nges must be t he sur f ace- mount ed t ype.

have t he f ol l owi ng t ype of r et ur n movement :

a. Spr i ng- act i on cam r et ur n movement

2. 2. 6. 2 Lat ch and Pul l

Lat ch and pul l must be a combi nat i on r ubber - f aced door st r i ke and keeper equi pped wi t h emer gency access.

2. 2. 6. 3 Coat Hooks

Coat hooks must be combi nat i on uni t s wi t h hooks and r ubber t i pped pi ns.

SECTI ON 10 21 13 Page 5

2. 3 PARTI TI ON PANELS AND DOORS

Fabr i cat e par t i t i on panel s and door s not l ess t han 1 i nch t hi ck wi t h f ace sheet s not l ess t han 0. 0396 i nch t hi ck.

Pr ovi de l ami nat ed pl ast i c and sol i d phenol i c t oi l et par t i t i ons and ur i nal scr eens t o meet t he emi ssi ons r equi r ement s of CDPH SECTI ON 01350 ( l i mi t r equi r ement s f or ei t her of f i ce or c l assr oom spaces r egar dl ess of space t ype) . Pr ovi de cer t i f i cat i on of i ndoor ai r qual i t y f or sol i d phenol i c, bl ack cor e par t i t i ons and scr eens.

2. 3. 1 Toi l et Encl osur es

Pr ovi de and conf or m t oi l et encl osur es t o CI D A- A- 60003, Type I , St y l e A, and f l oor suppor t ed C, over head br aced. Fur ni sh wi dt h, l engt h, and hei ght of t oi l et encl osur es as shown. Pr ovi de a wi dt h of 1 i nch. Fi ni sh sur f ace of panel s must be 1/ 4 i nch r adi us bevel ed edges. Rei nf or ce panel s i ndi cat ed t o r ecei ve t oi l et paper hol der s or gr ab bar s f or mount i ng of t he i t ems r equi r ed. Pr ovi de gr ab bar s t o wi t hst and a bendi ng st r ess, shear st r ess, shear f or ce, and a t ensi l e f or ce i nduced by 250 l bf . Gr ab bar s must not r ot at e wi t hi n t hei r f i t t i ngs.

2. 3. 2 Ur i nal Scr eens

Pr ovi de and conf or m ur i nal scr eens t o CI D A- A- 60003, Type I I I , St y l e A, f l oor suppor t ed. Pr ovi de f i ni sh f or sur f ace of scr eens as 1/ 4 i nch r adi us bevel ed edges. Fur ni sh wi dt h and hei ght of ur i nal scr eens as shown.

Pr ovi de t hi ckness of 1 i nch. Secur e wal l hung ur i nal scr eens wi t h 42 i nch l ong, cont i nuous f l anges. Fabr i cat e scr eens f r om t he same t ypes of panel s and pi l ast er s as t he t oi l et par t i t i ons. Use cor r osi on- r esi st ant st eel f i t t i ngs and f ast ener s.

2. 4 FLOOR- ANCHORED PARTI TI ONS

Pi l ast er s must be not l ess t han 1- 1/ 4 i nch t hi ck wi t h f ace sheet s not l ess than 0. 0635 i nch t hi ck. Pr ovi de anchor i ng devi ce at t he bot t om of t he pi l ast er consi st i ng of a st eel bar not l ess t han 1/ 2 by 7/ 8 i nch wel ded t o t he r ei nf or ced f ace sheet s and havi ng not l ess t han t wo 3/ 8 i nch r ound anchor age devi ces f or secur i ng t o t he f l oor s l ab. Pr ovi de anchor age devi ces compl et e wi t h t hr eaded r ods, expansi on shi el ds, l ock washer s, and l evel i ng- adj ust ment nut s. Tr i m pi ece at t he f l oor must be 3 i nch hi gh and f abr i cat ed f r om not l ess t han 0. 030 i nch t hi ck cor r osi on- r esi st ant st eel .

2. 5 OVERHEAD- BRACED PARTI TI ONS

Pi l ast er s must be not l ess t han 1- 1/ 4 i nch t hi ck wi t h f ace sheet s not l ess than 0. 0393 i nch t hi ck. Pr ovi de anchor i ng devi ce at t he bot t om of t he pi l ast er consi st i ng of a channel - shaped f l oor st i r r up f abr i cat ed f r om not l ess t han 0. 0635 i nch t hi ck mat er i al and a l evel i ng bol t . Secur e t he st i r r up t o t he pi l ast er wi t h not l ess t han a 3/ 16 i nch bol t and nut af t er t he pi l ast er i s l evel ed. Secur e t he st i r r up t o t he f l oor wi t h not l ess t han t wo l ead expansi on shi el ds and sheet met al scr ews. Fabr i cat e over head br ace f r om a cont i nuous ext r uded al umi num t ube not l ess t han 1 i nch wi de by 1- 1/ 2 i nch hi gh, 0. 125- i nch wal l t hi ckness. Fi ni sh must be AA- C22A31 i n accor dance wi t h AA DAF45. Set and secur e br ace i nt o t he t op of each pi l ast er . Fabr i cat e 3 i nch hi gh t r i m pi ece at t he f l oor f r om not l ess t han

0. 030 i nch t hi ck cor r osi on- r esi st ant st eel .

SECTI ON 10 21 13 Page 6

2. 6 PI LASTER SHOES

Pr ovi de shoes at pi l ast er s t o conceal f l oor - mount ed anchor age. Pi l ast er shoes must be st ai nl ess st eel . Hei ght must be 3 i nches.

2. 7 HARDWARE

Pr ovi de har dwar e f or t he t oi l et par t i t i on syst em t hat conf or ms t o CI D A- A- 60003 f or t he speci f i ed t ype and st y l e of par t i t i ons. Pr ovi de har dwar e pr e- dr i l l ed by manuf act ur er . Use a har dwar e f i ni sh t hat i s hi ghl y r esi st ant t o al kal i s , ur i ne, and ot her common t oi l et r oom aci ds. Har dwar e i ncl udes: chr ome pl at ed non f er r ous cast pi vot hi nges, gr avi t y t ype, adj ust abl e f or door c l ose posi t i oni ng; nyl on bear i ngs; chr ome pl at ed al umi num door l at ch; door st r i ke and keeper wi t h r ubber bumper ; and cast al l oy chr ome pl at ed coat hook and bumper . Pr ovi de l at chi ng devi ces and hi nges f or handi cap compar t ment s compl yi ng wi t h 36 CFR 1191 and st ai nl ess st eel door l at ches t hat oper at e wi t hout ei t her t i ght gr aspi ng or t wi st i ng of t he wr i st of t he oper at or . Use st ai nl ess st eel , t amper pr oof t ype scr ews and bol t s . Wal l mount i ng br acket s must be cont i nuous, f ul l hei ght , st ai nl ess st eel , i n accor dance wi t h t oi l et compar t ment manuf act ur er ' s i nst r uct i ons. Pr ovi de f l oor - mount ed anchor age consi st i ng of cor r osi on- r esi st ant anchor i ng assembl i es wi t h t hr eaded r ods, l ock washer s, and l evel i ng adj ust ment nut s at pi l ast er s f or st r uct ur al connect i on t o floor.

2. 8 COLORS AND FI NI SHES

2. 8. 1 Colors

Pr ovi de manuf act ur er ' s st andar d col or char t s f or col or of f i ni shes f or t oi l et par t i t i on syst em component s. Submi t t hr ee sampl es showi ng a f i ni shed edge on t wo adj acent s i des and cor e const r uct i on, each not l ess than 12- i nch squar e

2. 8. 2 Fi ni shes No. 4 and No. 5

Pr ovi de sol i d pl ast i c f abr i cat ed of sol i d phenol i c cor e wi t h mel ami ne f aci ng sheet s f or med under hi gh pr essur e r ender i ng a s i ngl e component sect i on not l ess t han one i nch t hi ck. Col or s must ext end t hr oughout t he panel t hi ckness. Pr ovi de exposed f i ni sh sur f aces: smoot h, wat er pr oof , non- absor bent , and r esi st ant t o st ai ni ng and mar ki ng wi t h pens, penci l s, or ot her wr i t i ng devi ces. Sol i d pl ast i c par t i t i ons must not show any s i gn of det er i or at i on when i mmer sed i n t he f ol l owi ng chemi cal s and mai nt ai ned at a t emper at ur e of 80 degr ees F f or a mi ni mum of 30 days:

Acet i c Aci d ( 80 per cent ) Hydr ochl or i c Aci d ( 40 per cent )

Acetone Hydr ogen Per oxi de ( 30 per cent )

Ammoni a ( l i qui d) I sopr opyl Al cohol

Ammoni a Phosphat e Lact i c Aci d ( 25 per cent )

Bl each ( 12 per cent ) Li me Sul f ur

SECTI ON 10 21 13 Page 7

Borax Nicotine

Brine Pot assi um Br omi de

Caust i c Soda Soaps

Chl or i ne Wat er Sodi um Bi car bonat e

Ci t r i c Aci d Tr i sodi um Phosphat e

Copper Chl or i de Ur ea; Ur i ne

Cor e Oi l s Vinegar

PART 3 EXECUTI ON

3. 1 PREPARATION

Take f i el d measur ement s pr i or t o t he pr epar at i on of dr awi ng and f abr i cat i on t o ensur e pr oper f i t s . Ver i f y t hat f i el d measur ement s, sur f aces, subst r at es and condi t i ons ar e as r equi r ed, and r eady t o r ecei ve wor k.

Ver i f y cor r ect spaci ng of pl umbi ng f i x t ur es. Ver i f y cor r ect l ocat i on of bui l t i n f r ami ng, anchor age, and br aci ng. Repor t i n wr i t i ng t o Cont r act i ng Of f i cer pr evai l i ng condi t i ons t hat wi l l adver sel y af f ect sat i sf act or y execut i on of t he wor k of t hi s sect i on. Do not pr oceed wi t h wor k unt i l unsat i sf act or y condi t i ons have been cor r ect ed.

3. 2 METAL PARTI TI ON FABRI CATI ON

a. Bef or e appl i cat i on of an enamel coat i ng syst em, sol vent - c l ean gal vani zed- st eel sur f aces t o r emove pr ocessi ng compounds, oi l s , and ot her cont ami nant s har mf ul t o coat i ng- syst em adhesi on. Af t er c l eani ng, coat t he sur f aces wi t h a met al - pr et r eat ment phosphat e coat i ng. Af t er pr et r eat ment , f i ni sh exposed gal vani zed- st eel sur f aces wi t h a baked- enamel coat i ng syst em as speci f i ed.

b. Pr ovi de an enamel coat i ng syst em consi st i ng of a f act or y- appl i ed baked acr yl i c enamel coat i ng syst em. Coat i ng syst em must be a dur abl e, washabl e, st ai n- r esi st ant , mar - r esi st ant f i ni sh.

3. 3 INSTALLATION

Do not i nst al l i t ems t hat show vi sual evi dence of bi ol ogi cal gr owt h.

I nst al l par t i t i ons r i gi d, st r ai ght , pl umb, and l evel , wi t h t he panel s cent er ed bet ween t he f i x t ur es. Pr ovi de a panel c l ear ance of not mor e t han 1/ 2 i nch and secur e t he panel s t o wal l s and pi l ast er s wi t h not l ess t han t wo wal l br acket s at t ached near t he t op and bot t om of t he panel . Locat e wal l br acket s so t hat hol es f or wal l bol t s occur i n masonr y or t i l e j oi nt s. Secur e Panel s t o pi l ast er s wi t h br acket s mat chi ng t he wal l br acket s. Pr ovi de f or adj ust ment due t o mi nor f l oor var i at i ons. Locat e head r ai l j oi nt s at pi l ast er cent er l i nes. I nst al l adj acent component s f or consi st ency of l i ne and pl ane. Equi p each door wi t h hi nges, one door l at ch, and one coat hook and bumper . Al i gn har dwar e t o uni f or m cl ear ance at ver t i cal edges of door s.

a. Secur e panel s t o hol l ow pl ast er ed wal l s wi t h t oggl e bol t s usi ng not l ess t han 1/ 4- 20 scr ews of t he l engt h r equi r ed f or t he wal l t hi ckness.

SECTI ON 10 21 13 Page 8

Toggl e bol t s must have a l oad- car r y i ng st r engt h of not l ess t han 600 pounds per anchor .

b. Secur e panel s t o cer ami c t i l e on hol l ow pl ast er ed wal l s or hol l ow concr et e- masonr y wal l s wi t h t oggl e bol t s usi ng not l ess t han 1/ 4- 20 scr ews of t he l engt h r equi r ed f or t he wal l t hi ckness. Toggl e bol t s must have a l oad- car r y i ng st r engt h of not l ess t han 600 pounds per anchor.

c. Secur e panel s t o sol i d masonr y or concr et e wi t h l ead or br ass expansi on shi el ds desi gned f or use wi t h not l ess t han 1/ 4- 20 scr ews, wi t h a shi el d l engt h of not l ess t han 1- 1/ 2 i nch. Expansi on shi el ds must have a l oad- car r y i ng st r engt h of not l ess t han 600 pounds per anchor .

d. Submi t I nst al l at i on Dr awi ngs f or met al t oi l et par t i t i ons and ur i nal scr eens showi ng pl ans, el evat i ons, det ai l s of const r uct i on, har dwar e, r ei nf or c i ng and bl ocki ng, f i t t i ngs, mount i ngs and escut cheons.

I ndi cat e on dr awi ngs t he t ype of par t i t i on, l ocat i on, mount i ng hei ght , cut out s, and r ei nf or cement r equi r ed f or t oi l et - r oom accessor i es.

3. 4 FLOOR- ANCHORED PARTI TI ONS

Secur e pi l ast er s t o t he f l oor wi t h t he anchor age devi ce speci f i ed. Make al l l evel i ng devi ces r eadi l y accessi bl e f or l evel i ng, pl umbi ng, and t i ght eni ng t he i nst al l at i on. Level t ops of door s wi t h t ops of pi l ast er s when door s ar e i n a c l osed posi t i on. Expansi on shi el ds must have a mi ni mum 2-inch penet r at i on i nt o t he concr et e s l ab.

3. 5 OVERHEAD- BRACED PARTI TI ONS

Secur e pi l ast er s t o t he f l oor wi t h t he anchor age devi ce speci f i ed. Make al l l evel i ng devi ces r eadi l y accessi bl e f or l evel i ng, pl umbi ng, and t i ght eni ng t he i nst al l at i on. Secur e over head br ace t o t he pi l ast er f ace wi t h not l ess t han t wo f ast ener s per f ace. Expansi on shi el ds must have a minimum 2- i nch penet r at i on i nt o t he concr et e s l ab. Make t ops of door s par al l el wi t h t he over head br ace when door s ar e i n a c l osed posi t i on.

3. 6 FI NAL ADJUSTMENT

Af t er compl et i on of t he i nst al l at i on, make f i nal adj ust ment s t o t he pi l ast er - l evel i ng devi ces, door har dwar e, and ot her wor ki ng par t s of t he par t i t i on assembl y. Door s must have a uni f or m ver t i cal edge cl ear ance of approximately 3/ 16 i nch and must r est open at appr oxi mat el y 30 degr ees when unlatched.

3. 7 CLEANING

Baked enamel f i ni sh must be t ouched up wi t h t he same col or of pai nt t hat was used f or t he f i ni sh. Cl ean al l sur f aces of t he wor k, and adj acent sur f aces soi l ed as a r esul t of t he wor k, i n an appr oved manner compl i ant wi t h t he manuf act ur er ' s r ecommended cl eani ng and pr ot ect i on f r om damage pr ocedur es unt i l accept ed. Remove al l equi pment , t ool s, sur pl us mat er i al s, and wor k debr i s f r om t he s i t e.

SECTI ON 10 21 13 Page 9

SECTI ON 10 22 13

WI RE MESH PARTI TI ONS

08/16

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN I RON AND STEEL I NSTI TUTE ( AI SI )

AI SI SG03- 3 ( 2002; Suppl 2001- 2004; R 2008) Col d- For med St eel Desi gn Manual Set

ASTM I NTERNATI ONAL ( ASTM)

ASTM A36/ A36M ( 2014) St andar d Speci f i cat i on f or Car bon St r uct ur al St eel

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Wi r e Mesh Par t i t i ons

Show l ayout , det ai l s , mat er i al s , di mensi ons, f i ni shes, and al l i nf or mat i on necessar y f or f abr i cat i on and i nst al l at i on.

SD- 03 Pr oduct Dat a

Wi r e Mesh Par t i t i ons

Submi t f or each t ype of par t i t i on, door , and wi ndow.

SD- 11 Cl oseout Submi t t al s

Recycl ed Cont ent f or Met al Post and Fr ami ng Mat er i al s

Recycl ed Cont ent f or Wi r e Mat er i al s

1. 3 DELI VERY, STORAGE, AND HANDLI NG

Del i ver mat er i al s i n manuf act ur er ' s or i gi nal , unopened cont ai ner s or packagi ng wi t h l abel s i nt act and l egi bl e. Del i ver , st or e, and handl e mat er i al s so as t o pr event damage. Repl ace damaged or def ect i ve mat er i al s wi t h new.

SECTI ON 10 22 13 Page 1

1. 4 DESCRI PTI ON OF WORK

Wi r e mesh par t i t i ons must be heavy dut y f or ext r a heavy i ndust r i al use.

Pr ovi de par t i t i ons compl et e wi t h f ast ener s, cappi ng bar s, adj ust abl e f l oor socket s, br aci ng, door s, har dwar e, and ot her i t ems necessar y f or a compl et e, useabl e, and r i gi d i nst al l at i on.

PART 2 PRODUCTS

2. 1 PRODUCT SUSTAI NABI LI TY CRI TERI A

For pr oduct s i n t hi s sect i on, wher e appl i cabl e and t o ext ent al l owed by per f or mance cr i t er i a, pr ovi de and document t he f ol l owi ng:

2. 1. 1 Recycl ed Cont ent f or St eel Mat er i al s

Recycl ed cont ent i s i dent i f i ed f or some pr oduct s i n t hi s sect i on; pr ovi de document at i on i n accor dance wi t h Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG par agr aph RECYCLED CONTENT. Ot her pr oduct s l i s t ed i n t hi s sect i on may be avai l abl e wi t h r ecycl ed cont ent ; i dent i f y t hose pr oduct s t hat meet pr oj ect r equi r ement s f or r ecycl ed cont ent , and pr ovi de document at i on i n accor dance wi t h Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG par agr aph RECYCLED CONTENT.

2. 2 MATERIALS

Met al post and f r ami ng mat er i al s l i s t ed bel ow must cont ai n a mi ni mum of 15 per cent post - consumer r ecycl ed cont ent and wi r e mat er i al s must cont ai n a mi ni mum of 50 per cent post - i ndust r i al r ecycl ed cont ent . Pr ovi de dat a i dent i f y i ng per cent age of r ecycl ed cont ent f or met al post and f r ami ng materials . Al so pr ovi de dat a i dent i f y i ng per cent age of r ecycl ed cont ent f or wi r e mat er i al s.

2. 2. 1 St eel Shapes, Pl at es, and Bar s

ASTM A36/ A36M.

2. 2. 2 Col d- For med St eel

AI SI SG03- 3.

2. 2. 3 Wi r e Mesh

Car bon st eel wi r e, woven di amond mesh, i nt er medi at e cr i mped.

2. 2. 4 Fl oor Socket s

Cast or f or ged st eel or duct i l e i r on, adj ust abl e, appr oxi mat el y 2- 1/ 2 i nches hi gh.

2. 3 HEAVY DUTY PARTI TI ONS

2. 3. 1 Wi r e Mesh

6 gage wi r e, 2 i nch mesh.

2. 3. 2 Panel Fr ames

1- 1/ 2 by 3/ 4 by 1/ 8 i nch st eel channel s.

SECTI ON 10 22 13 Page 2

2. 3. 3 Cent er Rei nf or c i ng Bar

One 1- 1/ 2 by 3/ 4 by 1/ 8 i nch channel wi t h al l wi r es woven t hr ough, or t wo 1- 1/ 4 by 3/ 8 by 1/ 8 i nch channel s bol t ed t oget her wi t h mesh i n bet ween.

2. 3. 4 Cappi ng Bar

St r uct ur al st eel channel , 3 i nch by 4. 1 pounds.

2. 3. 5 Cor ner Post s

St r uct ur al st eel angl es, 1- 3/ 4 by 1- 3/ 4 by 1/ 8 i nch.

2. 3. 6 Li ne Post s

Unl ess ot her wi se i ndi cat ed, pr ovi de par t i t i ons wi t h f l at bar l i ne post s bol t ed bet ween ver t i cal f r ame channel s. Si zes of post s must be as f ol l ows:

Par t i t i on Hei ght Si ze of Post s

7 f eet t o 12 f eet 2- 1/ 2 by 5/ 16 i nch

12 f eet t o 16 f eet 3 by 5/ 16 i nch or 2- 1/ 2 by 3/ 8 i nch

16 f eet t o 20 f eet 3- 1/ 2 by 5/ 16 i nch

2. 3. 7 Hi nged Door s

Fr ames must be 1- 1/ 2 by 3/ 4 by 1/ 8 i nch channel s wi t h 1- 1/ 2 by 1/ 8 i nch f l at bar cover on t op and bot t om r ai l s and on hi nge st i l e and a 1- 5/ 8 by 7/ 8 by 1/ 8 i nch angl e r i vet ed t o t he l ock st i l e. Pr ovi de 1- 1/ 2 pai r s of heavywei ght , wr ought st eel , non- r emovabl e pi n, but t hi nges r i vet ed or wel ded t o t he door and t he door openi ng f r ame f or each door .

2. 4 DOOR OPENI NG FRAMES

Pr ovi de f r ames t he same si ze and shape as t he ver t i cal f r ames f or t he mesh…