AM-05_SPECS.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION

NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

FORT IRWIN REPLACEMENT HOSPITAL, FORT IRWIN,

SAN BERNARDINO COUNTY, CALIFORNIA

Revised Page: See attached SF30 Continuation page.

USACE, Los Angeles District Contracting Division, West Region Branch 915 Wilshire Blvd P. O. Box 532711, Los Angeles, CA 90053-2325

See Item 7.

N/A

N/A

W912PL-12-R-0008

N/A

1 1

02/02/2012

N/A

SF 30 (Continuation Page)

Fort Irwin Hospital Replacement Fort Irwin, California

NOTICE TO ALL BIDDERS

This Amendment forms a part of the Contract Documents and modifies the original Bidding Documents dated December 2, 2011 and as noted below. This Amendment shall become a part of the Contract Documents to the same extent as though it has been written into the body thereof and bound therein. This Amendment is applicable to the items affected and all bidders are held responsible for the contents herein. Acknowledgement of receipt of this Amendment shall be so noted in the space provided on the Bid Form. Failure to do so may subject the Bidder to disqualification.

Revised Drawing Sheets

The following revised drawings, all dated 2/2/12 and as listed below, are to replace the original sheets from the Bid Documents dated December 2, 2011.

Sequence No.

Sheet Ref. No. Sheet Name Revision Description

30 CD001 LEGEND & NOTES LEGEND CHANGE

84 CS001 LAYOUT CONTROL PLAN WHOLE SHEET CHANGE

85 CS002 SANITARY SEWER SCHEDULE SCHEDULE CHANGES

86 CS003 SANITARY SEWER SCHEDULE SCHEDULE CHANGES

88 CS102 LAYOUT AND UTILITIES PLAN REVISED LAYOUT POINT

92 CS106 LAYOUT AND UTILITIES PLAN REVISED LAYOUT POINT

93 CS107 LAYOUT AND UTILITIES PLAN WHOLE SHEET CHANGE

95 CS109 LAYOUT AND UTILITIES PLAN CHANGE LANE LINE

96 CS110 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

97 CS111 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

98 CS112 LAYOUT AND UTILITIES PLAN WHOLE SHEET CHANGE

99 CS113 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

100 CS114 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

101 CS115 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

102 CS116 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

103 CS117 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

104 CS118 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

107 CS121 LAYOUT AND UTILITIES PLAN MISCELLANEOUS CHANGES

113 CS127 LAYOUT AND UTILITIES PLAN CROSSWALK SIGNAL CHANGE

123 CG001 STORM SEWER SCHEDULE SCHEDULE CHANGES

124 CG002 STORM SEWER SCHEDULE SCHEDULE CHANGES

125 CG003 STORM SEWER SCHEDULE SCHEDULE CHANGES

185 CG403 JOINT LINE LAYOUT MISCELLANEOUS CHANGES

189 CG503 DETAILS MISCELLANEOUS CHANGES

191 CG505 DETAILS MISCELLANEOUS CHANGES

195 CG509 DETAILS MISCELLANEOUS CHANGES

196 CG510 DETAILS MISCELLANEOUS CHANGES

197 CG511 DETAILS MISCELLANEOUS CHANGES

198 LF001 FURNISHING SCHEDULE AND NOTES MISCELLANEOUS CHANGES

201 LF103 FURNISHING PLAN MISCELLANEOUS CHANGES

208 LF207 FURNISHING DETAILS MISCELLANEOUS CHANGES

219 LP001 LANDSCAPE LEGEND AND SCHEDULE MISCELLANEOUS CHANGES

220 LP101 LANDSCAPE PLAN MISCELLANEOUS CHANGES

221 LP102 LANDSCAPE PLAN MISCELLANEOUS CHANGES

223 LP104 LANDSCAPE PLAN MISCELLANEOUS CHANGES

224 LP105 LANDSCAPE PLAN MISCELLANEOUS CHANGES

226 LP107 LANDSCAPE PLAN MISCELLANEOUS CHANGES

227 LP108 LANDSCAPE PLAN MISCELLANEOUS CHANGES

228 LP109 LANDSCAPE PLAN MISCELLANEOUS CHANGES

229 LP110 LANDSCAPE PLAN MISCELLANEOUS CHANGES

237 LP301 IRRIGATION PLAN MISCELLANEOUS CHANGES

239 LP303 IRRIGATION PLAN MISCELLANEOUS CHANGES

240 LP304 IRRIGATION PLAN MISCELLANEOUS CHANGES

245 LP401 IRRIGATION DETAILS MISCELLANEOUS CHANGES

426 P-AE120 COMPOSITE ROOF PLAN, LEVEL 2 MISCELLANEOUS CHANGES

659 H-AE12B LEVEL 2, AREA B - FLOOR PLAN MISCELLANEOUS CHANGES

665 H-AE15B LEVEL 5, AREA B - ROOF PLAN MISCELLANEOUS CHANGES

674 H-AE124 LEVEL 2, ZONE 4 - FLOOR PLAN MISCELLANEOUS CHANGES

685 H-AE151 ENLARGED CANOPY PLANS MISCELLANEOUS CHANGES

686 H-AE152 ENLARGED CANOPY PLANS MISCELLANEOUS CHANGES

H-AE174

LEVEL 2, ZONE 4 - REFLECTED CEILING

PLAN ADDED CHASE

714 H-AE223 PARTIAL BUILDING ELEVATIONS MISCELLANEOUS CHANGES

718 H-AE227 PARTIAL BUILDING ELEVATIONS MISCELLANEOUS CHANGES

741 H-AE334 WALL SECTIONS MISCELLANEOUS CHANGES

H-AE404

ENLARGED ELEVATOR PLANS &

SECTIONS MISCELLANEOUS CHANGES

775 H-AE431 ENLARGED CEILING PLANS MISCELLANEOUS CHANGES

777 H-AE433 ENLARGED CEILING PLANS MISCELLANEOUS CHANGES

802 H-AE519 CANOPY DETAILS MISCELLANEOUS CHANGES

806 H-AE523 EXTERIOR DETAILS MISCELLANEOUS CHANGES

823 H-AE540 STAIR ENVELOPE DETAILS MISCELLANEOUS CHANGES

834 H-AE553 INTERIOR PLAN DETAILS MISCELLANEOUS CHANGES

835 H-AE554 INTERIOR PLAN DETAILS MISCELLANEOUS CHANGES

849 H-AE568 TYPICAL PARTITION TYPE DETAILS MISCELLANEOUS CHANGES

866 H-AE599 INTERIOR SECTIONS - CURVED CEILING MISCELLANEOUS CHANGES

867 H-AE601 DOOR SCHEDULE - LEVEL 1 REVISED HARDWARE SET

871 H-AE605 DOOR SCHEDULE - LEVEL 2 & 3 DELETED DOOR

908 H-AE652 MISCELLANEOUS WINDOW DETAILS MISCELLANEOUS CHANGES

927 H-AF601 FINISH SCHEDULE - LEVEL 1 MISCELLANEOUS CHANGES

931 H-AF605 FINISH SCHEDULE - LEVEL 2 MISCELLANEOUS CHANGES

932 H-AF606 FINISH SCHEDULE - LEVEL 2 MISCELLANEOUS CHANGES

933 H-AF607 FINISH SCHEDULE - LEVEL 2 FINISH REMARK DELETED

938 H-AF612 FINISH SCHEDULE - LEVEL 2 FLOOR BASE CHANGE

939 H-AF613 FINISH SCHEDULE - LEVEL 3 MISCELLANEOUS CHANGES

940 H-AF614 FINISH SCHEDULE - LEVEL 3 MISCELLANEOUS CHANGES

942 H-AF616 FINISH SCHEDULE - LEVEL 3 MISCELLANEOUS CHANGES

943 H-AF617 FINISH SCHEDULE - LEVEL 3 FLOOR BASE CHANGE

H-AG508

EXTERIOR SIGNAGE ELEVATIONS AND

DETAILS MISCELLANEOUS CHANGES

1026 H-IN503 FLOOR TRANSITION DETAILS MISCELLANEOUS CHANGES

1059 H-QE124A LEVEL 2, ZONE 4A - EQUIPMENT ADDED WALL PROTECTION

MH8009 MECHANICAL SCHEDULES

MECHANICAL SCHEDULE

CHANGES

ES406 ENLARGED PLANS

REVISED TO SHOW CANOPY

LIGHTS

1703 H-EP111 LEVEL 1, ZONE 1, FLOOR PLAN - POWER REVISED DOOR OPERATION

ET601

OUTSIDE PLANT CABLE ENTRANCE RISER

DIAGRAM - ADN MISCELLANEOUS REVISION

H-EY111

LEVEL 1, ZONE 1, FLOOR PLAN -

ELECTRONIC SECURITY SYSTEM MISCELLANEOUS REVISION

1953 EY801 ELECTRONIC SECURITY SCHEDULES REVISED DOOR OPERATION

Revised Pages

Continuation Page SF 30 Pricing Schedule 00 10 10 – 8 Section 00850 – General Wage Decision Section 01 50 02 - Temporary Construction Facilities Site Maps – Temporary Trailers

Added Specification Sections

• Add the following new specification Section:

Section 10 81 13.00 50 – BIRD CONTROL DEVICES; and Section 13 27 54.00 10 – ELECTROMAGNETIC (EM) SHIELDING.

Revised Specification Sections

The following revised specification sections, noted as Amendment 5 and as listed below, are to replace the original specification sections from the Bid Documents dated December 2, 2011.

Section No. Name of section

Section 05 50 13 MISCELLANEOUS METAL FABRICATIONS (includes previous AM-04 revisions);

Section 05 59 13.00 50 TRELLIS FRAMING SYSTEM (includes previous AM-04 revisions);

Section 08 71 13.00 50 AUTOMATIC DOOR OPERATORS;

Section 08 81 00 GLAZING (includes previous AM-04 revisions);

Section 09 06 90 COLOR SCHEDULE (includes previous AM-04 revisions; also includes revised Casework and Millwork Schedule attachment);

Section 09 29 00 GYPSUM BOARD (includes previous AM-04 revisions);

Section 10 14 02 INTERIOR SIGNAGE (pages 2, 3 and 4 only);

Section 11 71 00 WARMING CABINETS, STERILIZERS, AND ASSOCIATED EQUIPMENT (page 9 only);

Section 11 72 13 MEDICAL EQUIPMENT, MISCELLANEOUS.

FORT IRWIN REPLACEMENT HOSPITAL W912PL-12-R-0008

AM-05

PRICING SCHEDULE

CONTRACTOR SHALL FURNISH ALL PLANT, LABOR, MATERIALS, EQUIPMENT, ETC. NECESSARY TO

PERFORM ALL WORK IN STRICT ACCORDANCE WITH THE TERMS AND CONDITIONS SET FORTH IN

THE CONTRACT TO INCLUDE ALL ATTACHMENTS THERETO

BASE SCHEDULE

LINE

ITEM UNIT OF UNIT TOTAL

NO. DESCRIPTION QUANTITY MEASURE PRICE PRICE

0001 Construct the Hospital Replacement To the 5 Ft. Building Line, Complete 1 JOB LUMP SUM $_____________

0002 Site Work and Utilities Outside the 5 Ft. Building Line, Complete 1 JOB LUMP SUM $_____________

0003 LEED Certification, See Section 01 33 29 and Para. 5, below 1 JOB LUMP SUM $_____________

0004 Alterations to the Existing Mary Walker Clinic, Complete 1 JOB LUMP SUM $____________

BASE PRICE $_________________________

(TOTAL OF LINE

ITEMS 0001 THRU 0004)

OPTION ITEMS

0005 (OPTION #1)

Interactive TV System, see Section 27 41 16.00 50 and Paragraph 6 below 1 JOB LUMP SUM $____________

0006 (OPTION #2)

Intrusion Detection System, See Section 28 20 01.00 50 and Paragraph 7 below 1 JOB LUMP SUM $___________

0007 (OPTION #3)

Installation of the Intrusion Detection Devices, see Paragraph 8 below 1 JOB LUMP SUM $___________

SUBTOTAL OPTION $________________________

ITEMS (TOTAL OF

LINE ITEMS 0005 -0007)

TOTAL PRICE $________________________

(LINE ITEMS 0001-0007)

FORT IRWIN REPLACEMENT HOSPITAL W912PL-12-R-0008

AM-05

1. Prices must be submitted on all individual items of this Pricing Schedule. Failure to do so may cause the proposal to be determined "unacceptable".

2. If a modification to a price based on unit price is submitted which provides for a lump sum adjustment to the total estimated price, the applications of the lump sum adjustment to each unit price in the Pricing Schedule must be stated. If it is not stated, the offeror agrees that the lump sum adjustment shall be applied on a pro rata basis to every unit price in the Pricing Schedule.

3. The offeror shall distribute his indirect costs (overhead, profit, bond, etc.) over all the items in the Pricing Schedule. The Government will review all submitted Pricing Schedules for any unbalancing of the items. Any submitted Pricing Schedule determined to be unbalanced may cause the proposal to be determined "unacceptable".

4. The successful offeror grants the options listed in the Pricing Schedule to the Government. Option #1 may be exercised any time up to 720 calendar days after the contractor receives the Notice of Award. Option #2 may be exercised any time up to 720 calendar days after the contractor receives the Notice of Award. Option #3 may be exercised any time up to 720 calendar days after the contractor receives the Notice of Award. Exercise of an option occurs upon mailing of written notice to the Contractor. Exercise will be made by the Contracting Officer.

The price for exercise of the option includes all work and effort associated with the scope of that item. No additional time for contract completion will be allowed when an option is exercised. The given contract completion time was formulated to include time necessary to perform all option work.

5. The Offeror shall acknowledge that it understands the contract requirements for achieving a final minimum LEED Platinum certification rating and other Federal sustainability contract requirements. Line Item No. 0003 in the Pricing Schedule is intended to capture the cost of LEED Platinum Certification and construction phase documentation. The validation and final determination of LEED credits earned will be accomplished by the GBCI (USGBC). The contractor will be provided access to the already registered LEED project. Compiling of documentation at LEED Online and use of the LEED Letter Templates is required. LEED design phase documentation has been completed by the designer of record. All LEED construction documentation, submittals and final LEED certification fees will be by the contractor. LEED certification of the project by the Contractor is required. The Government may audit or validate the contractor's LEED documentation during project execution towards the requirement of LEED platinum certification and for consideration of performance requirements, progress payments and contract close out. This will not relieve the Contractor's responsibility to satisfy all LEED documentation requirements as defined by the GBCI (USGBC).

6. Option No. 1 is to provide and install all equipment/devices for the Interactive Television System as described in Section 27 41 16.00 50, paragraphs 2.1.9, 2.9, 2.10, 2.11, 2.12, 2.13, 2.14, 2.15, 2.16, and 2.17.

7. Option No. 2 is to purchase the equipment/devices associated with the video surveillance subsystem or Intrusion Detection Subsystem as described in Section 28 20 01.00 50, paragraphs 2.3, 2.4, 2.6, 2.9, 2.10, 2.11, 2.12, 2.13, 2.14, 2.15, 2.16, 2.16.1, 2.16.2, 2.16.3, 2.17, 2.17.1, 2.17.2, and 2.17.3.

8. Option No. 3 is to install the equipment/devices associated with the video surveillance subsystem or Intrusion Detection Subsystem as purchased in Line Item No. 0006 (Option No.2).

9. 52.217-5 EVALUATION OF OPTIONS (JUL 1990)

Except when it is determined in accordance with FAR 17.206(b) not to be in the Government's best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s).

1 AM‐05

General Decision Number: CA120037 01/06/2012 CA37

Superseded General Decision Number: CA20100037

State: California

Construction Types: Building, Heavy (Heavy and Dredging) and Highway

County: San Bernardino County in California.

BUILDING CONSTRUCTION PROJECTS; DREDGING PROJECTS (does not include hopper dredge work); HEAVY CONSTRUCTION PROJECTS (does not include water well drilling); HIGHWAY CONSTRUCTION PROJECTS

Modification Number Publication Date 0 01/06/2012

2 AM‐05

ASBE0005-002 06/28/2010

Rates Fringes

Asbestos Workers/Insulator (Includes the application of all insulating materials, protective coverings, coatings, and finishes to all types of mechanical systems).....$ 32.79 16.31 Fire Stop Technician (Application of Firestopping Materials for wall openings and penetrations in walls, floors, ceilings and curtain walls)...........................$ 24.21 13.76

ASBE0005-004 06/28/2010

Rates Fringes

Asbestos Removal worker/hazardous material handler (Includes preparation, wetting, stripping, removal, scrapping, vacuuming, bagging and disposing of all insulation materials from mechanical systems, whether they contain asbestos or not)....$ 18.70 8.65

BOIL0092-003 05/01/2011

Rates Fringes

BOILERMAKER......................$ 41.26 25.27

* BRCA0004-011 05/01/2011

Rates Fringes

BRICKLAYER; MARBLE SETTER........$ 35.66 10.87

*The wage scale for prevailing wage projects performed in Blythe, China lake, Death Valley, Fort Irwin, Twenty-Nine Palms, Needles and 1-15 corridor (Barstow to the Nevada State Line) will be Three Dollars ($3.00) above the standard San Bernardino/Riverside County hourly wage rate

* BRCA0018-004 06/01/2011

Rates Fringes

MARBLE FINISHER..................$ 28.02 12.22

TILE FINISHER....................$ 27.80 12.54

3 AM‐05

TILE LAYER.......................$ 38.61 13.83

BRCA0018-010 09/01/2009

Rates Fringes

TERRAZZO FINISHER................$ 26.59 9.62

TERRAZZO WORKER/SETTER...........$ 33.63 10.46

* CARP0409-001 07/01/2010

Rates Fringes

CARPENTER

(1) Carpenter, Cabinet Installer, Insulation Installer, Hardwood Floor Worker and acoustical installer, and solar panels.$ 37.35 11.08

(2) Millwright..............$ 37.85 11.08

(3) Piledriver/Derrick Bargeman, Bridge or Dock Carpenter, Heavy Framer, Rock Bargeman or Scowman, Rockslinger, Shingler (Commercial)................$ 37.48 10.58

(3) Piledrivermen/Derrick Bargeman, Bridge or Dock Carpenter, Heavy Framer, Rock Bargeman or Scowman, Rockslinger, Shingler (Commercial)................$ 37.48 11.08

(4) Pneumatic Nailer, Power Stapler...............$ 37.60 11.08

(5) Sawfiler...............$ 37.44 11.08

(6) Scaffold Builder.......$ 28.55 11.08

(7) Table Power Saw Operator....................$ 37.45 11.08

FOOTNOTE: Work of forming in the construction of open cut sewers or storm drains, on operations in which horizontal lagging is used in conjunction with steel H-Beams driven or placed in pre- drilled holes, for that portion of a lagged trench against which concrete is poured, namely, as a substitute for back forms (which work is performed by piledrivers): $0.13 per hour additional. Certified Welder

- $1.00 per hour premium.

CARP0409-002 07/01/2008

Rates Fringes

Diver

(1) Wet.....................$ 663.68 9.82

(2) Standby.................$ 331.84 9.82

(3) Tender..................$ 323.84 9.82

(4) Assistant Tender........$ 299.84 9.82

4 AM‐05

Amounts in "Rates' column are per day

CARP0409-005 07/01/2010

Rates Fringes

Drywall

DRYWALL INSTALLER/LATHER....$ 37.35 11.08

STOCKER/SCRAPPER............$ 10.00 6.67

CARP0409-008 08/01/2010

Rates Fringes

Modular Furniture Installer......$ 17.00 7.41

* ELEC0011-002 07/25/2011

COMMUNICATIONS AND SYSTEMS WORK

Rates Fringes

Communications System Installer...................$ 27.25 11.35 Technician..................$ 29.05 10.53+3%

SCOPE OF WORK:

Installation, testing, service and maintenance of systems utilizing the transmission and/or transference of voice, sound, vision and digital for commercial, educational, security and entertainment purposes for the following: TV monitoring and surveillance, background-foreground music, intercom and telephone interconnect, inventory control systems, microwave transmission, multi-media, multiplex, nurse call systems, radio page, school intercom and sound, burglar alarms, fire alarm (see last paragraph below) and low voltage master clock systems in commercial buildings.

Communication Systems that transmit or receive information and/or control systems that are intrinsic to the above listed systems; inclusion or exclusion of terminations and testings of conductors determined by their function;

excluding all other data systems or multiple systems which include control function or power supply; excluding installation of raceway systems, conduit systems, line voltage work, and energy management systems. Does not cover work performed at China Lake Naval Ordnance Test Station. Fire alarm work shall be performed at the current inside wireman total cost package.

* ELEC0477-002 09/05/2011

Rates Fringes

Electricians:....................$ 35.35 3%+16.65

CABLE SPLICER: $1.00 per hour above Electrician rate.

5 AM‐05

TUNNEL WORK: 10% above Electrician rate.

ZONE PAY:

Zone A - 80 road miles from Post Office, 455 Orange Show Lane, San Bernardino, will be a free zone for all contractors Zone B - Any work performed outside Zone A's 80 road miles, shall add $11.00 per hour to the current wage scale.

ELEC1245-001 06/01/2011

Rates Fringes

LINE CONSTRUCTION

(1) Lineman; Cable splicer..$ 47.87 13.87

(2) Equipment specialist (operates crawler tractors, commercial motor vehicles, backhoes, trenchers, cranes (50 tons and below), overhead & underground distribution line equipment)...........$ 38.23 12.80

(3) Groundman...............$ 29.25 12.53

(4) Powderman...............$ 42.75 12.97

HOLIDAYS: New Year's Day, M.L. King Day, Memorial Day, Independence Day, Labor Day, Veterans Day, Thanksgiving Day and day after Thanksgiving, Christmas Day

ELEV0018-001 01/01/2011

Rates Fringes

ELEVATOR MECHANIC................$ 46.58 21.785

FOOTNOTE:

PAID VACATION: Employer contributes 8% of regular hourly rate as vacation pay credit for employees with more than 5 years of service, and 6% for 6 months to 5 years of service.

PAID HOLIDAYS: New Years Day, Memorial Day, Independence Day, Labor Day, Veterans Day, Thanksgiving Day, Friday after Thanksgiving, and Christmas Day.

ENGI0012-003 07/01/2011

6 AM‐05

OPERATOR: Power Equipment (All Other Work)

GROUP 1....................$ 36.13 20.77

GROUP 2....................$ 36.91 20.77

GROUP 3....................$ 37.20 20.77

GROUP 4....................$ 38.69 20.77

GROUP 5....................$ 40.49 20.77

GROUP 6....................$ 38.91 20.77

GROUP 8....................$ 39.02 20.77

GROUP 9....................$ 40.82 20.77

GROUP 10....................$ 39.14 20.77

GROUP 11....................$ 40.94 20.77

GROUP 12....................$ 39.31 20.77

GROUP 13....................$ 39.41 20.77

GROUP 14....................$ 39.44 20.77

GROUP 15....................$ 39.52 20.77

GROUP 16....................$ 39.64 20.77

GROUP 17....................$ 39.81 20.77

GROUP 18....................$ 39.91 20.77

GROUP 19....................$ 40.02 20.77

GROUP 20....................$ 40.14 20.77

GROUP 21....................$ 40.31 20.77

GROUP 22....................$ 40.41 20.77

GROUP 23....................$ 40.52 20.77

GROUP 24....................$ 40.64 20.77

GROUP 25....................$ 40.81 20.77

OPERATOR: Power Equipment (Cranes, Piledriving & Hoisting)

GROUP 1....................$ 37.48 20.77

GROUP 2....................$ 38.26 20.77

GROUP 3....................$ 38.55 20.77

GROUP 4....................$ 38.69 20.77

GROUP 5....................$ 38.91 20.77

GROUP 6....................$ 39.02 20.77

GROUP 7....................$ 39.14 20.77

GROUP 8....................$ 39.31 20.77

GROUP 9....................$ 39.48 20.77

GROUP 10....................$ 40.48 20.77

GROUP 11....................$ 41.48 20.77

GROUP 12....................$ 42.48 20.77

GROUP 13....................$ 43.48 20.77

OPERATOR: Power Equipment (Tunnel Work)

GROUP 1....................$ 37.98 20.77

GROUP 2....................$ 38.76 20.77

GROUP 3....................$ 39.05 20.77

GROUP 4....................$ 39.19 20.77

GROUP 5....................$ 39.41 20.77

GROUP 6....................$ 39.52 20.77

GROUP 7....................$ 39.64 20.77

7 AM‐05

PREMIUM PAY:

$3.75 per hour shall be paid on all Power Equipment Operator work on the followng Military Bases: China Lake Naval Reserve, Vandenberg AFB, Point Arguello, Seely Naval Base, Fort Irwin, Nebo Annex Marine Base, Marine Corp Logistics Base Yermo, Edwards AFB, 29 Palms Marine Base and Camp Pendleton

Workers required to suit up and work in a hazardous material environment: $2.00 per hour additional. Combination mixer and compressor operator on gunite work shall be classified as a concrete mobile mixer operator.

SEE ZONE DEFINITIONS AFTER CLASSIFICATIONS

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Bargeman; Brakeman; Compressor operator; Ditch Witch, with seat or similar type equipment; Elevator operator-inside; Engineer Oiler; Forklift operator (includes loed, lull or similar types under 5 tons;

Generator operator; Generator, pump or compressor plant operator; Pump operator; Signalman; Switchman

GROUP 2: Asphalt-rubber plant operator (nurse tank operator);

Concrete mixer operator-skip type; Conveyor operator;

Fireman; Forklift operator (includes loed, lull or similar types over 5 tons; Hydrostatic pump operator; oiler crusher (asphalt or concrete plant); Petromat laydown machine; PJU side dum jack; Screening and conveyor machine operator (or similar types); Skiploader (wheel type up to 3/4 yd.

without attachment); Tar pot fireman; Temporary heating plant operator; Trenching machine oiler

GROUP 3: Asphalt-rubber blend operator; Bobcat or similar type (Skid steer); Equipment greaser (rack); Ford Ferguson (with dragtype attachments); Helicopter radioman (ground);

Stationary pipe wrapping and cleaning machine operator

GROUP 4: Asphalt plant fireman; Backhoe operator (mini-max or similar type); Boring machine operator; Boxman or mixerman (asphalt or concrete); Chip spreading machine operator;

Concrete cleaning decontamination machine operator;

Concrete Pump Operator (small portable); Drilling machine operator, small auger types (Texoma super economatic or similar types - Hughes 100 or 200 or similar types -drilling depth of 30' maximum); Equipment greaser (grease truck); Guard rail post driver operator; Highline cableway signalman; Horizontal Directional Drilling Machine;

Hydra-hammer-aero stomper; Micro Tunneling (above ground tunnel); Power concrete curing machine operator; Power concrete saw operator; Power-driven jumbo form setter operator; Power sweeper operator; Rock Wheel Saw/Trencher;

Roller operator (compacting); Screed operator (asphalt or concrete); Trenching machine operator (up to 6 ft.); Vacuum or much truck

8 AM‐05

GROUP 5: Equipment Greaser (Grease Truck/Multi Shift).

GROUP 6: Articulating material hauler; Asphalt plant engineer; Batch plant operator; Bit sharpener; Concrete joint machine operator (canal and similar type); Concrete planer operator; Dandy digger; Deck engine operator;

Derrickman (oilfield type); Drilling machine operator, bucket or auger types (Calweld 100 bucket or similar types

- Watson 1000 auger or similar types - Texoma 330, 500 or 600 auger or similar types - drilling depth of 45' maximum); Drilling machine operator; Hydrographic seeder machine operator (straw, pulp or seed), Jackson track maintainer, or similar type; Kalamazoo Switch tamper, or similar type; Machine tool operator; Maginnis internal full slab vibrator, Mechanical berm, curb or gutter(concrete or asphalt); Mechanical finisher operator (concrete, Clary-Johnson-Bidwell or similar); Micro tunnel system (below ground); Pavement breaker operator (truck mounted);

Road oil mixing machine operator; Roller operator (asphalt or finish), rubber-tired earth moving equipment (single engine, up to and including 25 yds. struck); Self-propelled tar pipelining machine operator; Skiploader operator (crawler and wheel type, over 3/4 yd. and up to and including 1-1/2 yds.); Slip form pump operator (power driven hydraulic lifting device for concrete forms);

Tractor operator-bulldozer, tamper-scraper (single engine, up to 100 h.p. flywheel and similar types, up to and including D-5 and similar types); Tugger hoist operator (1 drum); Ultra high pressure waterjet cutting tool system operator; Vacuum blasting machine operator

GROUP 8: Asphalt or concrete spreading operator (tamping or finishing); Asphalt paving machine operator (Barber Greene or similar type); Asphalt-rubber distribution operator;

Backhoe operator (up to and including 3/4 yd.), small ford, Case or similar; Cast-in-place pipe laying machine operator; Combination mixer and compressor operator (gunite work); Compactor operator (self-propelled); Concrete mixer operator (paving); Crushing plant operator; Drill Doctor;

Drilling machine operator, Bucket or auger types (Calweld 150 bucket or similar types - Watson 1500, 2000 2500 auger or similar types - Texoma 700, 800 auger or similar types -drilling depth of 60' maximum); Elevating grader operator;

Grade checker; Gradall operator; Grouting machine operator;

Heavy-duty repairman; Heavy equipment robotics operator;

Kalamazoo balliste regulator or similar type; Kolman belt loader and similar type; Le Tourneau blob compactor or similar type; Loader operator (Athey, Euclid, Sierra and similar types); Mobark Chipper or similar; Ozzie padder or similar types; P.C. slot saw; Pneumatic concrete placing machine operator (Hackley-Presswell or similar type);

Pumpcrete gun operator; Rock Drill or similar types; Rotary drill operator (excluding caisson type); Rubber-tired earth-moving equipment operator (single engine, caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. up to and including 50 cu.

9 AM‐05

yds. struck); Rubber-tired earth-moving equipment operator (multiple engine up to and including 25 yds. struck);

Rubber-tired scraper operator (self-loading paddle wheel type-John Deere, 1040 and similar single unit); Self-propelled curb and gutter machine operator; Shuttle buggy;

Skiploader operator (crawler and wheel type over 1-1/2 yds.

up to and including 6-1/2 yds.); Soil remediation plant operator; Surface heaters and planer operator; Tractor compressor drill combination operator; Tractor operator (any type larger than D-5 - 100 flywheel h.p. and over, or similar-bulldozer, tamper, scraper and push tractor single engine); Tractor operator (boom attachments), Traveling pipe wrapping, cleaning and bendng machine operator;

Trenching machine operator (over 6 ft. depth capacity, manufacturer's rating); trenching Machine with Road Miner attachment (over 6 ft depth capacity): Ultra high pressure waterjet cutting tool system mechanic; Water pull (compaction) operator

GROUP 9: Heavy Duty Repairman

GROUP 10: Drilling machine operator, Bucket or auger types (Calweld 200 B bucket or similar types-Watson 3000 or 5000 auger or similar types-Texoma 900 auger or similar types-drilling depth of 105' maximum); Dual drum mixer, dynamic compactor LDC350 (or similar types); Monorail locomotive operator (diesel, gas or electric); Motor patrol-blade operator (single engine); Multiple engine tractor operator (Euclid and similar type-except Quad 9 cat.); Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Pneumatic pipe ramming tool and similar types; Prestressed wrapping machine operator;

Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Rubber tired earth moving equipment operator (multiple engine, Euclid, caterpillar and similar over 25 yds. and up to 50 yds. struck), Tower crane repairman; Tractor loader operator (crawler and wheel type over 6-1/2 yds.); Woods mixer operator (and similar Pugmill equipment)

GROUP 11: Heavy Duty Repairman - Welder Combination, Welder - Certified.

GROUP 12: Auto grader operator; Automatic slip form operator;

Drilling machine operator, bucket or auger types (Calweld, auger 200 CA or similar types - Watson, auger 6000 or similar types - Hughes Super Duty, auger 200 or similar types - drilling depth of 175' maximum); Hoe ram or similar with compressor; Mass excavator operator less tha 750 cu.

yards; Mechanical finishing machine operator; Mobile form traveler operator; Motor patrol operator (multi-engine);

Pipe mobile machine operator; Rubber-tired earth- moving equipment operator (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck); Rubber-tired self- loading scraper operator (paddle-wheel-auger type self-loading - two (2) or more units)

10 AM‐05

GROUP 13: Rubber-tired earth-moving equipment operator operating equipment with push-pull system (single engine, up to and including 25 yds. struck)

GROUP 14: Canal liner operator; Canal trimmer operator;

Remote- control earth-moving equipment operator (operating a second piece of equipment: $1.00 per hour additional);

Wheel excavator operator (over 750 cu. yds.)

GROUP 15: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine-up to and including 25 yds. struck)

GROUP 16: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 17: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 50 cu. yds. struck);

Tandem tractor operator (operating crawler type tractors in tandem - Quad 9 and similar type)

GROUP 18: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -single engine, up to and including 25 yds. struck)

GROUP 19: Rotex concrete belt operator (or similar types);

Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds.and up to and including 50

cu. yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck)

GROUP 20: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 21: Rubber-tired earth-moving equipment operator, 11 AM‐05 operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck)

GROUP 22: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, up to and including 25 yds. struck)

GROUP 23: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating with the tandem push-pull system (multiple engine, up to and including 25 yds. struck)

GROUP 24: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds.

struck)

GROUP 25: Concrete pump operator-truck mounted; Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck)

CRANES, PILEDRIVING AND HOISTING EQUIPMENT CLASSIFICATIONS

GROUP 1: Engineer oiler; Fork lift operator (includes loed, lull or similar types)

GROUP 2: Truck crane oiler

GROUP 3: A-frame or winch truck operator; Ross carrier operator (jobsite)

GROUP 4: Bridge-type unloader and turntable operator;

Helicopter hoist operator

GROUP 5: Hydraulic boom truck; Stinger crane (Austin-Western or similar type); Tugger hoist operator (1 drum)

GROUP 6: Bridge crane operator; Cretor crane operator; Hoist operator (Chicago boom and similar type); Lift mobile operator; Lift slab machine operator (Vagtborg and similar types); Material hoist and/or manlift operator; Polar gantry crane operator; Self Climbing scaffold (or similar type); Shovel, backhoe, dragline, clamshell operator (over 3/4 yd. and up to 5 cu. yds. mrc); Tugger hoist operator

GROUP 7: Pedestal crane operator; Shovel, backhoe, dragline, clamshell operator (over 5 cu. yds. mrc); Tower crane

12 AM‐05

repair; Tugger hoist operator (3 drum)

GROUP 8: Crane operator (up to and including 25 ton capacity); Crawler transporter operator; Derrick barge operator (up to and including 25 ton capacity); Hoist operator, stiff legs, Guy derrick or similar type (up to and including 25 ton capacity); Shovel, backhoe, dragline, clamshell operator (over 7 cu. yds., M.R.C.)

GROUP 9: Crane operator (over 25 tons and up to and including 50 tons mrc); Derrick barge operator (over 25 tons up to and including 50 tons mrc); Highline cableway operator;

Hoist operator, stiff legs, Guy derrick or similar type (over 25 tons up to and including 50 tons mrc); K-crane operator; Polar crane operator; Self erecting tower crane operator maximum lifting capacity ten tons

GROUP 10: Crane operator (over 50 tons and up to and including 100 tons mrc); Derrick barge operator (over 50 tons up to and including 100 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 50 tons up to and including 100 tons mrc), Mobile tower crane operator (over 50 tons, up to and including 100 tons M.R.C.); Tower crane operator and tower gantry

GROUP 11: Crane operator (over 100 tons and up to and including 200 tons mrc); Derrick barge operator (over 100 tons up to and including 200 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 100 tons up to and including 200 tons mrc); Mobile tower crane operator (over 100 tons up to and including 200 tons mrc)

GROUP 12: Crane operator (over 200 tons up to and including 300 tons mrc); Derrick barge operator (over 200 tons up to and including 300 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 200 tons, up to and including 300 tons mrc); Mobile tower crane operator (over 200 tons, up to and including 300 tons mrc)

GROUP 13: Crane operator (over 300 tons); Derrick barge operator (over 300 tons); Helicopter pilot; Hoist operator, stiff legs, Guy derrick or similar type (over 300 tons);

Mobile tower crane operator (over 300 tons)

TUNNEL CLASSIFICATIONS

GROUP 1: Skiploader (wheel type up to 3/4 yd. without attachment)

GROUP 2: Power-driven jumbo form setter operator

GROUP 3: Dinkey locomotive or motorperson (up to and including 10 tons)

GROUP 4: Bit sharpener; Equipment greaser (grease truck);

Slip form pump operator (power-driven hydraulic lifting device for concrete forms); Tugger hoist operator (1 drum);

13 AM‐05

Tunnel locomotive operator (over 10 and up to and including 30 tons)

GROUP 5: Backhoe operator (up to and including 3/4 yd.);

Small Ford, Case or similar; Drill doctor; Grouting machine operator; Heading shield operator; Heavy-duty repairperson;

Loader operator (Athey, Euclid, Sierra and similar types);

Mucking machine operator (1/4 yd., rubber-tired, rail or track type); Pneumatic concrete placing machine operator (Hackley-Presswell or similar type); Pneumatic heading shield (tunnel); Pumpcrete gun operator; Tractor compressor drill combination operator; Tugger hoist operator (2 drum);

Tunnel locomotive operator (over 30 tons)

GROUP 6: Heavy Duty Repairman

GROUP 7: Tunnel mole boring machine operator

ENGINEERS ZONES

$1.00 additional per hour for all of IMPERIAL County and the portions of KERN, RIVERSIDE & SAN BERNARDINO Counties as defined below:

That area within the following Boundary: Begin in San Bernardino County, approximately 3 miles NE of the intersection of I-15 and the California State line at that point which is the NW corner of Section 1, T17N,m R14E, San Bernardino Meridian. Continue W in a straight line to that point which is the SW corner of the northwest quarter of Section 6, T27S, R42E, Mt. Diablo Meridian. Continue North to the intersection with the Inyo County Boundary at that point which is the NE corner of the western half of the northern quarter of Section 6, T25S, R42E, MDM. Continue W along the Inyo and San Bernardino County boundary until the intersection with Kern County, as that point which is the SE corner of Section 34, T24S, R40E, MDM. Continue W along the Inyo and Kern County boundary until the intersection with Tulare County, at that point which is the SW corner of the SE quarter of Section 32, T24S, R37E, MDM. Continue W along the Kern and Tulare County boundary, until that point which is the NW corner of T25S, R32E, MDM. Continue S following R32E lines to the NW corner of T31S, R32E, MDM. Continue W to the NW corner of T31S, R31E, MDM. Continue S to the SW corner of T32S, R31E, MDM. Continue W to SW corner of SE quarter of Section 34, T32S, R30E, MDM.

Continue S to SW corner of T11N, R17W, SBM. Continue E along south boundary of T11N, SBM to SW corner of T11N, R7W, SBM.

Continue S to SW corner of T9N, R7W, SBM. Continue E along south boundary of T9N, SBM to SW corner of T9N, R1E, SBM.

Continue S along west boundary of R1E, SMB to Riverside County line at the SW corner of T1S, R1E, SBM. Continue E along south boundary of T1s, SBM (Riverside County Line) to SW corner of T1S, R10E, SBM. Continue S along west boundary of R10E, SBM to Imperial County line at the SW corner of T8S, R10E, SBM.

Continue W along Imperial and Riverside county line to NW corner of T9S, R9E, SBM. Continue S along the boundary between Imperial and San Diego Counties, along the west edge of R9E, 14 AM‐05

SBM to the south boundary of Imperial County/California state line. Follow the California state line west to Arizona state line, then north to Nevada state line, then continuing NW back to start at the point which is the NW corner of Section 1, T17N, R14E, SBM

$1.00 additional per hour for portions of SAN LUIS OBISPO, KERN, SANTA BARBARA & VENTURA as defined below:

That area within the following Boundary: Begin approximately 5 miles north of the community of Cholame, on the Monterey County and San Luis Obispo County boundary at the NW corner of T25S, R16E, Mt. Diablo Meridian. Continue south along the west side of R16E to the SW corner of T30S, R16E, MDM. Continue E to SW corner of T30S, R17E, MDM. Continue S to SW corner of T31S, R17E, MDM. Continue E to SW corner of T31S, R18E, MDM.

Continue S along West side of R18E, MDM as it crosses into San Bernardino Meridian numbering area and becomes R30W. Follow the west side of R30W, SBM to the SW corner of T9N, R30W, SBM.

Continue E along the south edge of T9N, SBM to the Santa Barbara County and Ventura County boundary at that point whch is the SW corner of Section 34.T9N, R24W, SBM, continue S along the Ventura County line to that point which is the SW corner of the SE quarter of Section 32, T7N, R24W, SBM. Continue E along the south edge of T7N, SBM to the SE corner to T7N, R21W, SBM. Continue N along East side of R21W, SBM to Ventura County and Kern County boundary at the NE corner of T8N, R21W.

Continue W along the Ventura County and Kern County boundary to the SE corner of T9N, R21W. Continue North along the East edge of R21W, SBM to the NE corner of T12N, R21W, SBM. Continue West along the north edge of T12N, SBM to the SE corner of T32S, R21E, MDM. [T12N SBM is a think strip between T11N SBM and T32S MDM]. Continue North along the East side of R21E, MDM to the Kings County and Kern County border at the NE corner of T25S, R21E, MDM, continue West along the Kings County and Kern County Boundary until the intersection of San Luis Obispo County. Continue west along the Kings County and San Luis Obispo County boundary until the intersection with Monterey County. Continue West along the Monterey County and San Luis Obispo County boundary to the beginning point at the NW corner of T25S, R16E, MDM.

$2.00 additional per hour for INYO and MONO Counties and the Northern portion of SAN BERNARDINO County as defined below:

That area within the following Boundary: Begin at the intersection of the northern boundary of Mono County and the California state line at the point which is the center of Section 17, T10N, R22E, Mt. Diablo Meridian. Continue S then SE along the entire western boundary of Mono County, until it reaches Inyo County at the point which is the NE corner of the Western half of the NW quarter of Section 2, T8S, R29E, MDM.

Continue SSE along the entire western boundary of Inyo County, until the intersection with Kern County at the point which is the SW corner of the SE 1/4 of Section 32, T24S, R37E, MDM.

Continue E along the Inyo and Kern County boundary until the

15 AM‐05

intersection with San Bernardino County at that point which is the SE corner of section 34, T24S, R40E, MDM. Continue E along the Inyo and San Bernardino County boundary until the point which is the NE corner of the Western half of the NW quarter of Section 6, T25S, R42E, MDM. Continue S to that point which is the SW corner of the NW quarter of Section 6, T27S, R42E, MDM.

Continue E in a straight line to the California and Nevada state border at the point which is the NW corner of Section 1, T17N, R14E, San Bernardino Meridian. Then continue NW along the state line to the starting point, which is the center of Section 18, T10N, R22E, MDM.

REMAINING AREA NOT DEFINED ABOVE RECIEVES BASE RATE

ENGI0012-004 08/01/2009

Rates Fringes

OPERATOR: Power Equipment

(DREDGING)

(1) Leverman................$ 44.83 17.22

(2) Dredge dozer............$ 40.36 17.22

(3) Deckmate................$ 40.25 17.22

(4) Winch operator (stern winch on dredge)............$ 39.70 17.22

(5) Fireman-Oiler, Deckhand, Bargeman, Leveehand...................$ 39.16 17.22

(6) Barge Mate..............$ 39.77 17.22

IRON0002-004 07/01/2010

Rates Fringes

Ironworkers:

Fence Erector...............$ 26.58 15.26 Ornamental, Reinforcing and Structural..............$ 33.00 23.73

PREMIUM PAY:

$6.00 additional per hour at the following locations:

China Lake Naval Test Station, Chocolate Mountains Naval Reserve-Niland, Edwards AFB, Fort Irwin Military Station, Fort Irwin Training Center-Goldstone, San Clemente Island, San Nicholas Island, Susanville Federal Prison, 29 Palms - Marine Corps, U.S. Marine Base - Barstow, U.S. Naval Air Facility - Sealey, Vandenberg AFB

$4.00 additional per hour at the following locations:

Army Defense Language Institute - Monterey, Fallon Air Base, Naval Post Graduate School - Monterey, Yermo Marine Corps Logistics Center

16 AM‐05

$2.00 additional per hour at the following locations:

Port Hueneme, Port Mugu, U.S. Coast Guard Station - Two Rock

LABO0300-001 07/01/2011

Rates Fringes

Brick Tender.....................$ 27.17 16.71

LABO0300-003 07/01/2011

Rates Fringes

LABORER (GUNITE)

GROUP 1.....................$ 30.04 14.20

GROUP 2.....................$ 29.09 14.20

GROUP 3.....................$ 25.55 14.20

LABORER (TUNNEL)

GROUP 1.....................$ 32.20 15.98

GROUP 2.....................$ 32.52 15.98

GROUP 3.....................$ 32.98 15.98

GROUP 4.....................$ 33.67 15.98

LABORER

GROUP 1.....................$ 26.33 16.00

GROUP 2.....................$ 26.88 16.00

GROUP 3.....................$ 27.43 16.00

GROUP 4.....................$ 28.98 16.00

GROUP 5.....................$ 29.33 16.00

FOOTNOTE: GUNITE PREMIUM PAY: Workers working from a Bosn'n's Chair or suspended from a rope or cable shall receive 40 cents per hour above the foregoing applicable classification rates. Workers doing gunite and/or shotcrete work in a tunnel shall receive 35 cents per hour above the foregoing applicable classification rates, paid on a portal-to-portal basis. Any work performed on, in or above any smoke stack, silo, storage elevator or similar type of structure, when such structure is in excess of 75'-0" above base level and which work must be performed in whole or in part more than 75'-0" above base level, that work performed above the 75'-0" level shall be compensated for at 35 cents per hour above the applicable classification wage rate.

LABORER CLASSIFICATIONS

GROUP 1: Cleaning and handling of panel forms; Concrete screeding for rough strike-off; Concrete, water curing;

Demolition laborer, the cleaning of brick if performed by a worker performing any other phase of demolition work, and the cleaning of lumber; Fire watcher, limber, brush loader, piler and debris handler; Flag person; Gas, oil and/or water pipeline laborer; Laborer, asphalt-rubber material loader; Laborer, general or construction; Laborer, general clean-up; Laborer, landscaping; Laborer, jetting; Laborer, 17 AM‐05 temporary water and air lines; Material hose operator (walls, slabs, floors and decks); Plugging, filling of shee bolt holes; Dry packing of concrete; Railroad maintenance, repair track person and road beds; Streetcar and railroad construction track laborers; Rigging and signaling; Scaler;

Slip form raiser; Tar and mortar; Tool crib or tool house laborer; Traffic control by any method; Window cleaner;

Wire mesh pulling - all concrete pouring operations

GROUP 2: Asphalt shoveler; Cement dumper (on 1 yd. or larger mixer and handling bulk cement); Cesspool digger and installer; Chucktender; Chute handler, pouring concrete, the handling of the chute from readymix trucks, such as walls, slabs, decks, floors, foundation, footings, curbs, gutters and sidewalks; Concrete…