Appendix_GG_-_CID_24_July_14.pdf

Submi ed by:

JACOBS / AMMANN & WHITNEY

299 Madison Avenue, Suite 1

Morristown, NJ 07906

Submi ed to:

US Army Corps of Engineers New York District

CID

FY14 Renovate Dormitory, Building 97 Thule Air Base, Greenland

24 July 2014 Project No.: WWCX 10-3005

A M M A N N W H I T N E Y&

Thule Air Base, Greenland

Comprehensive Interior Design Package July 24, 2014

Proj. No. : WWCX-10-3005

Table of Contents

Chapter 1 – General Information

1.1 Statement of Design Objectives

1.2 Structural Interior Design (SID) Manufacturer Summary List

1.3 Furniture, Fixtures & Equipment (FF&E) Manufacturer Summary List

Chapter 2 – Structural Interior Design

2.1 Colorboards

2.1.1 Interior Finishes

2.2 Material Cut Sheets

2.3 Warranties

2.4 Room Finish and Finish Material Key Schedule

I-601 Interior Finish and Interior Finish Materials Key-Structural

Chapter 3 – Comprehensive Interior Design

3.1 Furniture Plans

I-101 First Floor Furniture Plan

I-102 Second Floor Furniture Plan

I-103 Third Floor Furniture Plan

3.2 Enlarged Furniture Plans

I-401 Enlarged Furniture Plans

3.3 Furniture Order Forms

Chapter 1 – General Information

1.1 Statement of Design Objectives

The Comprehensive Interior Design (CID) package for the Thule Dormitory in Greenland provides the specifications, selections and warranty information for the interior finishes and furniture of this facility. This package is being developed to meet the finish requirements for this project. Finishes and furniture have been selected with the chosen ‘Recycled Glass’ CID motif selected by Air Force Officials for this particular building.

A. Function: The relationship of all interior and exterior spaces has been developed to facilitate daily operations, enhance operational efficiencies, and provide customer satisfaction.

B. Cost Effectiveness: All finishes provided will reflect the best value in terms of aesthetic value and life-cycle costs. There will be consideration in appointing funds to appropriate locations. Areas that provide the most impact on the customer’s experience will be considered important locations.

C. Durability: Selection of quality materials will ensure that the facility will look fresh and clean for years to come.

D. Maintainability: Finishes will be selected to limit future maintenance requirements.

E. Design: The design objective of this facility is simple. People should feel comfortable and productive in their living and work environment.

F. Creativity: The project will rely on innovation and creativity in color and style. Providing the best value is the goal for the functions of this facility and the personnel who will use it.

G. Flexibility: Where finishes are more imbedded into the building design, such as porcelain tile, a more neutral color scheme is appropriate. Finishes that can be updated easily, such as paint, allow for more popular colors to be used. This allows for future renovations with little cost impact.

H. Timelessness: The interior image of this building should stand the test of time and minimize becoming outdated. Materials and finishes that relate to a more timeless standard or that may be easily updated with minimal cost will be incorporated.

I. Sustainability: Creating a healthy building for its users and for our planet will be at the forefront of the design.

Finishes and adhesives with low VOC’s will help maintain a healthy indoor environment. Natural or recycled/recyclable materials will be a part of the design where possible. Also, materials that do not need a lot of maintenance will aid in the sustainability effort.

1.2 SID Manufacturer Summary

List

Armstrong LSI Wallcovering JJ Haines & Company P.O. Box 32159 6950 Aviation Blvd. Louisville, KY 40232 Glen Burnie, MD 21061 Tel: 502-458-2614 Tel: 800-638-1406 X2022 Fax: 502-458-2639

Avonite Mats Inc.

Aristech Acrylica LLC P.O. Box 839 7350 Empire Dr. 37 Shuman Avenue Florence, KY 41042 Stoughton, MA 02072 Tel: 800-354-9858 Tel: 800-MATS-INC Fax: 859-283-7378 Fax: (781) 344-1537

Tandus Flooring Sherwin Williams Company 311 Smith Industrial Blvd. 101 Prospect Ave PO Box 1447 Cleveland, Ohio 44101 Dalton, GA 30722-1447 Tel: 216-566-2000 Tel: 800.248.2878

Daltile Springs Window Fashions 791 Paul Birch Drive 8467 Route 405 HW South Crownsville, MD 21032 Box 500 Tel: 410-923-5680 Montgomery, PA 17752 Fax 410-923-5681 Tel: 877-792-0002

Formica Corporation StarQuartz Industries, Inc.

10155 Reading Road 211 Boston Street Cincinnati, OH 45241 Middleton, MA 01949 Tel: 800-367-6422 Tel: 800-726-7845 Fax: 978-750-7306 Johnsonite 16910 Munn Road TOLI Corporation - Overseas Division Chagrin Falls, Ohio 44023 2-10-4 Higashi-Shinbashi Tel: 800-899-8916 Minato-ku Tokyo Fax: 440-543-8920 105-0021 Japan Tel: 813-5403-2078 Fax: 813-5472-6307

1.2 SID Manufacturer Summary

List (Continued)

Korogard 3875 Embassy Parkway Fairlawn, OH 44333

Tel: 800-628-0449 Fax: 330-668-7703

1.3 FF&E Manufacturer Summary List

Avanti Products The HON Company 10880 NW 30th Street 200 Oak Street Miami, FL 33172 Muscatine, Iowa 52761 Tel: 800-323-5029 Tel: 563-272-7100 Fax: 305-591-3629

Bosch Kitchen Aid 5551 McFadden Ave. 553 Benson Rd.

Huntington Beach, CA 92649 Benton Harbor, MI 49022 Tel: 800-944-2904 Tel: 800-422-1230 Fax: 714-901-5360

Broan Nu-Tone, LLC. Maharam P.O. Box 270140 146 Greene Street Hartford, WI 53027 New York, NY 10012 Tel: 800-558-1711 Tel: 212-334-7222

Casson Art Nessen Lighting Accessories for Contract Sales, Inc. P.O. Box 187 Customer Service 420 Railroad Way P.O. Box 4187 Mamaroneck, NY 10543 Martinsville, VA 24115 Tel: 914-698-7799 Tel: 800-550-4278 Fax: 914-698-5577

Follett Corporation Thomasville Contract Group 801 Church Lane Tel: 636-537-9548 Easton, PA 18040 Fax: 636-778-9278 Tel: 800-523-9361 Fax: 610-250-0696

GE Appliances Quiltcraft GE Answer Center 1230 East Ledbetter Drive Tel: 800-626-2005 Dallas, TX 75216-6988 IDEmobler Max Jessen A/S Industrivej 2 DK-9575 Terndrup Tel: +45 9833 5333 Fax: +45 9833 6111

1.3 FF&E Manufacturer Summary

List (Continued)

HTH Headquarter HTH Kitchen Industrivej 6

DK-6870 Ølgod Tel: +75 24 4777

Chapter 2 – Structural Interior Design

2.1 Colorboards

2.1.1 Interior Finishes

P-5 P-3, P-4 P-1, P-2

CPT-1

SU-1

SU-4

BS-1

RB-1

SU-2

SU-3

WC-1

PT-1/PTB-1 PT-2

ACT-1

FINISH SAMPLE IS SENT

SEPERATELY DUE TO SIZE

STYLE

COLOR

RST-1 SS-1 PLAM-1

LN-1 LN-2

LN-3

2.2 Material Cut Sheets

FY-’13 DORMITORY

THULE AIR BASE, GREENLAND

ACT-1

Dune Tegular with Suprafine® 9/16" Exposed Tee grid

Dune Tegular with Interlude XL® 9/16"

Dimensional Tee grid

Dune Tegular with Silhouette® 9/16"

Bolt-Slot grid 1/4" Reveal

Dune with Prelude® XL® 15/16" Exposed Tee grid (Pg. 215);

Axiom® Classic Trim (Pg. 236)

Detail (Other Suspension Systems compatible. Refer to listing on page 156.)

• Non-directional visual reduces installation time and scrap

• 30-Year Limited System Warranty against visible sag (excludes items 1796 and 1798), mold/mildew, and bacterial growth

Color

K e y S e l e c t i o n A t t r i b u t e s

• Upgrade look at a modest price

• Ceiling-2-Ceiling™ Post-consumer Recycled

Content options: Items 1774HRC, 1775HRC, 1776HRC, 1777HRC. 35% Pre-consumer;

18% Post-consumer

• Durable Scratch-resistant

T y p i c a l A p p l i c a t i o n s

• Offices

• Corridors

• Retail

• Hospitality

• Classrooms

TechLineSM 877 ARMSTRONG armstrong.com/ceilings (search: dune)155

Items 1772, 1773, 1774, 1775 & 177610-YEAR Availability

Square Lay-in & Tegular fine texture

DUNE™

White (WH)

Dune Dune Square Lay-in with Prelude 15/16"

Exposed Tee grid

Dune with Interlude® 9/16" Dimensional Tee grid (Pg. 211);

Axiom® Classic Trim (Pg. 236) bowmanar Cross-Out

ACT-1 (CONT.)

CG-1

CPT-1

HAPHAZARD #03366

Product Specification Sheet

Face Construction Imperial Metric Construction Stratatec® Patterned Loop Face Weight 14 oz/sq yd 474.6 g/sq m Gauge 5/64 50.4 rows/10 cm Stitches per Inch 9.8 38.6 pu/10 cm Tuft Density 125.4 tufts/sq in 19.4 tufts/sq cm Pile Height Average 0.187 inch 4.7 mm Pile Thickness 0.098 inch 2.5 mm Density Factor 5,143 oz/cu yd 190.3 kg/cu m Fiber System TDX Nylon Dye Method Solution Dyed Soil/Stain Protection Ensure 7.8 Kilotex Primary Tufting Substrate Synthetic Non-Woven Pattern Repeat N/A

Third Party Environmental Certifications Product Recycled Content NSF 140-2007

Overall Post-Consumer Certified ER3® Modular 44-65% 10% Platinum Certified Powerbond® ethos™ Cushion 36-61% 18% Platinum Certified Powerbond® ER3® Cushion 39-59% 10% Platinum Certified ethos™ Modular 26-50% 10% Platinum Certified Flex-Aire™ Cushion Modular 15-33% **Recycled content certified by SCS and varies by product style.

Product Testing/Information Antimicrobial Chemicals No antimicrobials (EPA Registered pesticides) added to product (ASTM E2471-05) Electrostatic Propensity 1.9 kV (AATCC 134); Permanent Conductive Fiber Surface Flammability Passes CPSC FF 1-70 (ASTM D-2859) Flooring Radiant Panel Class 1 (mean average CRF: 0.45 w/sq cm or higher) (ASTM E-648) Smoke Generation Less than 450 (ASTM E-662) Colorfastness to Light > 4 after 100 hours (AATCC 16E) Fluorine Minimum 500 ppm (CRI TM-102)

After two cleanings per AATCC 171: Minimum 400 ppm (CRI TM-102)

Installation Methods Peel and Stick RS Adhesive System - Full Coverage Peel & Stick Wet Spread Backing specific Tandus Adhesives Installation Method Quarter Turn, Random

Product Notes

1. Specifications are subject to nominal manufacturing variances. Material supply and/or manufacturing processes may necessitate changes without notice. Colors may vary slighlty from dye lot to dye lot.

2. U.S. Patent numbers: 4,849,297; 4,49,267; 5,728,741; 5,855,981; 5,914,353; 6,406,574

3. The use of chair pads under roller caster chairs may be required in order to maintain full limited warranty coverage.

Please refer to the applicable limited warranty verbiage for specific requirements. In all cases, chair pads are recommended for optimum textural performance. Absent the use of chair pads, more intensive direct maintenance will be required for areas in contact with chair caster traffic, and some degree of appearance change is to be expected.

800.848.2878 tandus.com

CPT-1 (CONT.)

CPT-1 (CONT.)

GT-1

Architectural Advantage

S T A R Q U A R T Z I N D U S T R I E S , I N C . • 1 3 0 0 R U S S E L L S T R E E T • B A L T I M O R E , M D • 2 1 2 3 0 P H O N E : 8 6 6 - 2 2 0 - 4 5 0 0 • F A X : 8 6 6 - 2 2 0 - 4 7 0 0 • W W W . S T A R Q U R T Z . C O M

Revolutionary Urethane Grout Technology

Grout has always been the Achilles’ heel of the tile industry. The architectural community has long been looking for a product that solves the three leading problems associated with grout: staining, cracking and discoloration. QuartzLock™ 2 Grout solves these problems by providing unmatched stain, chemical and crack resistance, while being guaranteed not to fade or discolor.

For years, architects have specified epoxy grout because it offers improved stain / chemical resistance and durability as compared to cement grouts. QuartzLock 2 Grout is a Urethane Grout and, by its nature, is more chemical / stain resistant than epoxy grout, with the added benefit of dramatically improved crack resistance (due to its inherent flexibility!), making it a perfect product for the high‐ performance applications that architects favor. Additionally, it is most green grout product available today. The following is a summary of the QuartzLock 2 Grout features and benefits that architects consider when specifying grout:

Features Benefits

Commercially Rated Approved for most commercial applications.

Self‐sealing Exceptional stain / chemical resistance.

No sealing required – EVER!

Semi‐flexible Urethane flexibility and extremely low shrinkage provides the highest level of crack resistance.

No pigments (colored quartz provides color)

Guaranteed not to fade or discolor.

40 colors (solid and speckled)

Tremendous design possibilities; by not having pigments, two or more grout colors can be used adjacently on same installation.

UV‐Stable Perfect for outdoor applications – won’t yellow or fade in the sun.

Comes ready‐to‐use / Easy clean‐up

Cost‐effective vs. epoxy and sealed cement grouts.

Non‐sagging Great for vertical applications.

Environmentally Friendly Low VOC, BPA‐free, no waste

Limited Warranty

StarQuartz warrants that QuartzLock 2 Grout will be free from manufacturing defects and will not break down or deteriorate under normal usage for a period of two (2) years when installed in accordance with StarQuartz’s written specifications and industry standard guidelines in commercial applications. See full warranty for further detail.

QuartzLock 2 meets or exceeds ANSI 118.3 Standard

Test Results Provided by the Tile Council of North America Laboratory

Description Typical Results

Water Cleanability Pass Initial Set <2 hrs.

Service Strength Pass Vertical joint sag Pass Linear Shrinkage1 0.06% Stain Resistance2 Pass Compressive strength3 >3,500 psi Chemical Resistance Pass Water absorption <1%

1 Heat‐cured sample to compensate for air‐dry vs. catalytic product.

2 TCNA results compared to Laticrete’s published data show that QuartzLock 2 exceeds SpectraLock PRO™ for stain resistance.

3 Test results were performed in an actual grout joint.

Other Important Facts:

Dry Time: 24 hours light foot traffic, 72 hours heavy foot traffic, 7 days for wet areas, like showers

Joint Width: 1/16” or greater

Cost: Similar to epoxy grout

Availability: QuartzLock 2 Grout is available at better distributors throughout the U.S. and Canada

Why are we greener?

1. Most specified grouts require mixing, which causes the release of airborne particulate that many states are beginning to regulate because of the potential health risk. QuartzLock 2 Grout is pre‐mixed and ready to use, eliminating this health risk.

2. Epoxy grouts contains bisphenol‐A (BPA) that can produce severe allergies. Jobs can be slowed or not taken by good tile installers because epoxy is specified. QuartzLock2 Grout contains no BPA.

3. Most epoxy grouts produce VOC’s that many states regulate. QuartzLock 2 Grout utilizes a water‐based Urethane that produces nearly zero VOC’s.

4. QuartzLock 2 Grout wash water is more environmentally friendly because it does not contain epoxy, cement, or pigments.

5. Urethane Technology’s crack resistance and durability can lead to longer installation life cycles.

6. Because QuartzLock 2 Grout is re‐usable it produces no waste.

7. QuartzLock 2 Grout buckets are made of recyclable Class 2 HPDE.

P-1, P-3

101.76

HARMONY

Interior Latex Eg-Shel B09-500 Series

SPECIFICATIONS

Block 1 ct. Loxon Block Surfacer* 2 cts. Harmony Interior Latex Eg-Shel

Drywall 1 ct. Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Eg-Shel

Masonry 1 ct. Loxon Concrete & Masonry

Primer* or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Eg-Shel

Plaster 1 ct. Premium Wall & Wood Primer* or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Eg-Shel

Wood, Composition Board 1 ct. Premium Wall & Wood Primer* or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Eg-Shel

* These primers contain relatively low amounts of VOCs, but could result in mi-nor, noticeable odors.

Other primers may be appropriate.

To optimize hide and color development, always use the recommended P-shade primer

SURFACE PREPARATION

WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other ad-verse health effects, especially in chil-dren or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health au-thority.

Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Exist-ing peeled or checked paint should be scraped and sanded to a sound surface.

Glossy surfaces should be sanded dull.

Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer.

Drywall Fill cracks and holes with patching paste/spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust.

Masonry, Concrete, Cement, Block All new surfaces must be cured accord-ing to the supplier’s recommendations— usually about 30 days. Remove all form release and curing agents. Rough sur-faces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer.

CHARACTERISTICS

Harmony Interior Latex Eg-Shel provides a durable, low-odor, anti-microbial*, inte-rior paint formulated without silica.

You can use this product, without typical odor complaints, in occupied areas be-cause of the very low odor during appli-cation and drying.

In addition, this product is specially for-mulated with odor-reducing properties to help reduce common household odors.

Color: Most Colors Coverage: 350-400 sq ft/gal @ 4 mils wet; 1.8 mils dry Drying Time, @ 77°F, 50% RH:

Touch: 1 hour Recoat: 4 hours

Drying and recoat times are temperature, humidity, and film thickness dependent Flash Point: N/A Finish: 10 - 20 units @ 85° Tinting with ColorCast Ecotoners:

Base oz/gal Strength Extra White 0-5 125% Deep Base 4-12 125% Vehicle Type: EVA

B09W00551 VOC (EPA Method 24):

0 g/L; 0.0 lb/gal Volume Solids: 42 ± 2% Weight Solids: 57 ± 2% Weight per Gallon: 11.1 lb

* Anti-microbial - This product contains agents which inhibit the growth of mi-crobes on the surface of this paint film.

8/2012 www.sherwin-williams.com continued on back

As of 08/06/2012, Complies with:

OTC Yes LEED® 09 CI Yes SCAQMD Yes LEED® 09 NC Yes CARB Yes LEED® 09 SC Yes MPI # 144 LEED® H Yes NGBS Yes

*Our Green Sure® designation means this high performance product was designed and manufactured taking steps to reduce environmental impact and to meet or ex-ceed the most stringent regulatory re-quirements.

To learn more, visit swgreensure.com.

P-2, P-4, P-5

101.77

HARMONY

Interior Latex Semi-Gloss B10-500 Series

SPECIFICATIONS

Block 1 ct. Loxon Block Surfacer* 2 cts. Harmony Interior Latex Semi-

Gloss

Drywall 1 ct. Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Semi-

Gloss

Masonry 1 ct. Loxon Concrete & Masonry

Primer* or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Semi-

Gloss

Plaster 1 ct. Premium Wall & Wood Primer* or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Semi-

Gloss

Wood, Composition Board 1 ct. Premium Wall & Wood Primer* or Harmony Interior Latex Primer 2 cts. Harmony Interior Latex Semi-

Gloss

* These primers contain relatively low amounts of VOCs, but could result in mi-nor, noticeable odors.

Other primers may be appropriate.

To optimize hide and color development, always use the recommended P-shade primer

SURFACE PREPARATION

WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other ad-verse health effects, especially in chil-dren or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health au-thority.

Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Exist-ing peeled or checked paint should be scraped and sanded to a sound surface.

Glossy surfaces should be sanded dull.

Stains from water, smoke, ink, pencil, grease, etc. should be sealed with the appropriate primer/sealer.

Drywall Fill cracks and holes with patching paste/spackle and sand smooth. Joint compounds must be cured and sanded smooth. Remove all sanding dust.

Masonry, Concrete, Cement, Block All new surfaces must be cured accord-ing to the supplier’s recommendations— usually about 30 days. Remove all form release and curing agents. Rough sur-faces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Concrete & Masonry Primer.

CHARACTERISTICS

Harmony Interior Latex Semi-Gloss provides a durable, low-odor, anti-microbial*, interior paint formulated with-out silica.

You can use this product, without typical odor complaints, in occupied areas be-cause of the very low odor during appli-cation and drying.

In addition, this product is specially for-mulated with odor-reducing properties to help reduce common household odors.

Color: Most Colors Coverage: 350-400 sq ft/gal @ 4 mils wet; 1.6 mils dry Drying Time, @ 77°F, 50% RH:

Touch: 1 hour Recoat: 4 hours

Drying and recoat times are temperature, humidity, and film thickness dependent Flash Point: N/A Finish: 35 - 45 units @ 60° Tinting with ColorCast Ecotoners:

Base oz/gal Strength Extra White 0-5 125% Deep Base 4-12 125% Vehicle Type: Styrenated Acrylic/EVA

B10W00551 VOC (EPA Method 24):

0 g/L; 0.0 lb/gal Volume Solids: 45 ± 2% Weight Solids: 56 ± 2% Weight per Gallon: 10.5 lb

* Anti-microbial - This product contains agents which inhibit the growth of mi-crobes on the surface of this paint film.

8/2012 www.sherwin-williams.com continued on back

As of 08/06/2012, Complies with:

OTC Yes LEED® 09 CI Yes SCAQMD Yes LEED® 09 NC Yes CARB Yes LEED® 09 SC Yes MPI # No LEED® H Yes NGBS Yes

*Our Green Sure® designation means this high performance product was designed and manufactured taking steps to reduce environmental impact and to meet or ex-ceed the most stringent regulatory re-quirements.

To learn more, visit swgreensure.com.

PLAM-1

Formica® Laminate by Formica Group 1

PRODUCT DESCRIPTION

Melamine-impregnated decorative surface papers are combined with phenolic-treated kraft paper and consolidated in a press at high pressures. The sheet back is sanded to maintain a uniform thickness and facilitate bonding.

COLORS AND FINISH

Formica® Brand Laminate sheets (horizontal general purpose grade 10/HGS) are available in a broad selection of designs and colors. Standard finishes for each pattern are detailed in the

Formica Corporation - National Product Guide (Form No. 02-034W).

Not all finishes are available in all Solid Colors / Patterns / Wood-grains. Polished finish (-90) is not recommended for heavy-duty horizontal surfaces.

Formica Brand Laminate sheets (horizontal post-forming grade

12/HGP and vertical post-forming grade 20/VGP) are available in a broad selection of designs and colors. Standard finishes for each pattern are detailed in the Formica Corporation - National

Product Guide (Form No. 02-034W). Not all finishes are available in all Solid Colors / Patterns / Woodgrains. Polished finish (-90) is not recommended for heavy-duty horizontal surfaces.

RECOMMENDED APPLICATION

Grade 10/HGS

Formica Brand Laminate – general purpose grade 10/HGS is intended for application to interior horizontal or vertical surfaces where design, appearance, quality, durability, resistance to stain, and resistance to heat from ordinary sources are important considerations.

Grade 12/HGP

Formica Brand Laminate – post-forming laminate grade 12/HGP is intended for application to interior horizontal or vertical surfaces requiring 1/2" (12.7mm) or greater outside radiused edges, and/or

3/16" (4.8mm) cove radii, where design, appearance, quality, durability, resistance to stain, and resistance to heat from ordi-nary sources are important considerations.

Grade 20/VGP

Formica Brand Laminate – post-forming grade 20/VGP is intended for application to interior vertical surfaces requiring

3/8" (9.5mm) or greater outside radiused edges, where design, appearance, quality, durability, resistance to stain, and resistance to heat from ordinary sources are important considerations.

FABRICATION AND ASSEMBLY

LIMITATIONS

MACHINING LOW SHEEN LAMINATE SHEETS

Formica Brand Laminate with low sheen surfaces are subject to marring. Fabricating with peel coat on surface (if applicable) is recommended. Router base should be clean and free of burrs and debris. Table saws should be clean, flat, and free of burrs.

STORAGE

Formica Brand Laminate should be stored horizontally, with a caul board or other protective sheet placed on top to protect the material from possible damage. The material should be protected from moisture, and should never be stored in contact with the floor or an outside wall. Optimum conditions for storage are approximately 75°F (24°C), and 45% to 55% relative humidity.

PRECONDITIONING

Prior to fabrication, allow laminate sheet and substrate to acclimate for at least 48 hours at the same ambient conditions.

Optimum conditions are approximately 75°F (24°C), and relative humidity of 45% to 55%. Provisions should be made for the circulation of air around the materials.

SUBSTRATES

Formica Brand Laminate sheet should be bonded to an appropriate substrate, such as #45 density particleboard (ANSI

A208.1 - 1999), or Medium Density Fiberboard (MDF). Due to the potential for stress cracking, shrink-back, and surface telegraphing problems, the use of plywood is strongly discouraged and not recommended. The substrate should be sanded smooth, and should be clean, free of oil or grease, and uniform in thickness.

Formica Brand Laminate sheet (grade 10/HGS) can be bonded to metal substrates using contact adhesive (see recommendations below, under Adhesives).

FORMICA® LAMINATE BY FORMICA GROUP

TECHNICAL DATA (GENERAL PUPOSE GRADE 10 AND POST-FORMING GRADES 12 & 20)

Formica Brand Laminate is designed for interior use only. Do not adhere directly to plaster, drywall (gypsum board), or concrete.

Do not use in areas exposed to temperatures exceeding 275°F

(135°C) or for exterior applications. When using Grade 20, finished panel widths should not exceed 24" (610mm) maximum, unless the adhesive system is a rigid set adhesive like PVA

(wood glue). We do not recommend contact adhesive for Grade 20 panels wider than 24" (610mm).

Formica® Laminate by Formica Group 2

ADHESIVES

Contact, semi-rigid (PVAc), or rigid (urea, resorcinol) adhesives may be used. Follow the adhesive manufacturer’s recommenda-tions. Certain combinations of finish, substrate, and adhesive can cause telegraphing.

When bonding Formica Brand Laminate sheet (grade 10/ HGS) to metal substrates using contact adhesive, use Formica brand flammable solvent-based #155 or non-flammable solvent-based

#120M contact adhesives. Do not use water-based or SBR types of contact adhesive when bonding laminate sheets to metal substrates.

ASSEMBLY

Material, equipment, and workmanship should conform to the

Formica Corporation recommended standard practices, condi-tions, procedures, and recommendations as specified by ANSI/

NEMA LD3-2005, Architectural Woodwork Quality Standards and ANSI 161.2-1998 Standards.

Formica Brand Laminate sheets (grade 10, 12, and 20) can be sawed, drilled, routed, and fabricated using standard carbidetipped cutting tools.

Holes for screws or bolts should be drilled oversized.

Panel assemblies should be laminated with the appropriate backing sheet to minimize warpage. Formica backing sheets

(grade 91/BKV or 99/BKH) are recommended for less critical applications. Optimum balancing is obtained by bonding the same surface laminate on both sides of the assembly with the same adhesive. Always align sanding marks in the same direction.

All inside corners of cutouts must be radiused as large as possible, 1/8" (3.18mm) minimum, to avoid stress cracking. The edges and corners should be routed, sanded, or filed smooth and free of chips or nicks. Panels fabricated using metal substrates, which are more dimensionally stable than wood-based materials, should be installed in a framing system, which captures the perimeter of the panel yet allows for the normal dimensional movement of the laminate. This is to protect the panel edge and prevent edge lifting or separation from the substrate, which can occur under dry conditions.

TECHNICAL DATA

Performance compliance of Formica Brand Laminate General purpose grade 10 and Post-forming grades 12 and 20

FORMICA® LAMINATE BY FORMICA GROUP

TECHNICAL DATA (GENERAL PUPOSE GRADE 10 AND POST-FORMING GRADES 12 & 20) CONTINUED

ANSI / NEMA STANDARDS PUBLICATION — LD3-2005

PHYSICAL PROPERTIES LD3 TEST 10/HGS

Appearance 3.1 No ABC Defects

Light Resistance 3.3 Slight

Cleanabil ity 3.4 20 (max.)

Stain Resistance

Reagents 1 - 10

Reagents 11 - 15

3.4

No Effect

Moderate

Boiling Water Resistance 3.5 No Effect

High Temperature Resistance 3.6 Slight

Ball Impact Resistance - in

- mm

3.8 50 (min.)

1270 (min.)

Radiant Heat Resistance - sec 3.10 125 (min.)

Dimensional Change

Machine Direction - %

Cross Direction - %

3.11

0.50 (max.)

0.90 (max.)

Wear Resistance - cycles 3.13 400 (min.)

PHYSICAL PROPERTIES LD3 TEST 12/HGP 20/VGP

Appearance 3.1 No ABC

Defects

No ABC

Defects

Light Resistance 3.3 Slight Slight

Cleanabil ity 3.4 20 (max.) 20 (max.)

Stain Resistance

Reagents 1 - 10

Reagents 11 - 15

3.4

No Effect

Moderate

No Effect

Moderate

Boiling Water Resistance 3.5 Slight Slight

High Temperature Resistance 3.6 Slight Slight

Ball Impact Resistance - in

- mm

3.8 30 (min.)

762 (min.)

20 (min.)

508 (min.)

Radiant Heat Resistance - sec 3.10 100 (min.) 80 (min.)

Dimensional Change

Machine Direction - %

Cross Direction - %

3.11

1.1 (max.)

1.4 (max.)

1.1 (max.)

1.4 (max.)

Wear Resistance - cycles 3.13 400 (min.) 400 (min.)

Formability - in

- mm

3.14 5/8

1/2

Blister Resistance - sec 3.15 55 40

PLAM-1 (CONT.)

Formica® Laminate by Formica Group 3

FIRE TEST DATA – ASTM E-84

Formica Corporation conducts and maintains an active fire testing program to provide code regulators, architects, and designers with current information on a variety of panel assemblies. Fire test data using Formica® Brand Laminate sheets (grades 10/HGS, 12HGP, and 20/VGP) is available upon request. Contact Formica®

Technical Services at 1-800-FORMICA™ (option 2) or 513-786-

3578 for assistance.

CODES AND SPECIFICATIONS

FORMICA BRAND LAMINATE

(GENERAL PURPOSE — GRADE 10/HGS / HORIZONTAL APPLICATION)

U.S. Federal Specification, LP-508-H, Style D, Type I, Class 1

U.S. Military Specification, MIL-P-17171E(SH), Type I

FMVSS 302

NSF Standard 35

City of New York, Board of Standards and Appeals, MEA No. 326-86M

GREENGUARD CERTIFICATION

FORMICA BRAND LAMINATE

(POST-FORMING — GRADE 12/HGP / HORIZONTAL APPLICATION)

U.S. Federal Specification, LP-508-H, Style D, Type II, Class 1

FMVSS 302

NSF Standard 35

City of New York, Board of Standards and Appeals, MEA No. 327-86M

GREENGUARD CERTIFICATION

FORMICA BRAND LAMINATE

(POST-FORMING — GRADE 20/VGP / VERTICAL APPLICATION)

U.S. Federal Specification, LP-508-H, Style D, Type II, Class 2

CFR Part 3280 Manufacturing Home Construction and

Safety Standards

FMVSS 302

NSF Standard 35

GREENGUARD CERTIFICATION

SIZES

Sheet widths: 36" (914mm), 48" (1219mm), 60" (1524mm)

Sheet lengths: 96" (2438mm, 120" (3048mm), 144" (3658mm)

THICKNESS

WEIGHT PER SQUARE FOOT

Grade 10/HGS: 0.324 pounds

Grade 12/HGP: 0.252 pounds

Grade 20/VGP: 0.180 pounds

TO ORDER FORMICA BRAND LAMINATE SAMPLES,

PLEASE CALL

U.S.: 1-800-FORMICA™ (select option 1)

Canada: 1-800-363-1405 for ZIP-CHIP service

HOW TO SPECIFY

Surface (and appropriate backing sheet) shall be Formica Brand

Laminate by Formica Group, Cincinnati, Ohio.

COLOR NUMBER

COLOR NAME

GRADE

FINISH

SIZE

USE AND CARE

Refer to Formica Brand Laminate Use and Care Guide – Form No.

YLT 02358w for specific details.

Formica Brand Laminate sheet may be cleaned with a damp cloth and mild detergent.

If in doubt about the suitability of a particular cleaner or detergent, check with its manufacturer. Use of abrasive cleaners, powders, scouring pads, steel wool, sandpaper, etc., can damage the finish of the decorative surface and are not recommended.

Acid or alkaline-based cleaners, compounds, etc., will mar, etch, corrode, and permanently discolor the decorative surface of laminate. Never use these materials on laminate, nor allow bottles, rags, etc., contaminated with them to contact the surface.

Accidental spills or splatters from these harsh materials should be wiped off immediately, and the area cleaned thoroughly with a damp cloth.

FORMICA® LAMINATE BY FORMICA GROUP

TECHNICAL DATA (GENERAL PUPOSE GRADE 10 AND POST-FORMING GRADES 12 & 20) CONTINUED

TYPICAL NEMA

THICKNESS THICKNESS RANGE

Grade 10 (HGS) .045" (1.1mm) .043" - .053" (1.08mm - 1.32mm)

Grade 12 (HGP) .035" (0.9mm) .034" - .044" (0.88mm - 1.12mm)

Grade 20 (VGP) .026" (0.7mm) .024" - .032" (0.6mm - 0.8mm)

PLAM-1 (CONT.)

Formica® Laminate by Formica Group 4

LIMITED WARRANTY

Formica Corporation expressly warrants that, for a period of one

(1) year from the date of first sale, these products will be reason-ably free of defects in materials and workmanship, and that when properly handled and fabricated, will conform, within accepted tolerance, to applicable manufacturing specifications. Colors subject to dye lot variations. This limited warranty only applies to Formica Brand Laminate which is stored, handled, fabricated and installed in the manner recommended by Formica Corpora-tion. Due to the variety of uses and applications to which Formica

Brand Laminate may be put, FORMICA CORPORATION CAN MAKE NO

WARRANTY THAT THIS PRODUCT IS SUITABLE FOR ANY PARTICULAR

PURPOSE AND CAN MAKE NO OTHER WARRANTIES, EXPRESS

OR IMPLIED, OTHER THAN THOSE SET FORTH ABOVE.

DISCLAIMER OF WARRANTIES

THE WARRANTIES SET FORTH HEREIN OR IN FORMICA CORPORA-

TION’S WARRANTY DOCUMENTS WITH RESPECT TO A PRODUCT

ARE THE ONLY WARRANTIES MADE BY FORMICA CORPORATION IN

CONNECTION WITH THESE PRODUCTS, AND ARE EXPRESSLY IN LIEU

OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY

FORMICA CORPORATION ARE SOLD ONLY TO THE SPECIFICATIONS

SPECIFICALLY SET FORTH BY FORMICA CORPORATION IN WRITING.

FORMICA CORPORATION’S SOLE OBLIGATION FOR A REMEDY TO

BUYER SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING

PRODUCTS, OR AT THE OPTION OF FORMICA CORPORATION, RETURN

OF THE PRODUCT AND REFUND OF THE PURCHASE PRICE. BUYER

ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF

THE PRODUCTS PURCHASED, WHETHER USED SINGLY OR IN

COMBINATION WITH OTHER SUBSTANCES.

LIMITATION OF LIABILITY

No claim by buyer of any kind, including claims for indemnifica-tion, whether as to quality or amount of products delivered or for non-delivery of products, shall be greater in amount than the purchase price of the products in respect of which damages are claimed. IN NO EVENT SHALL FORMICA CORPORATION BE LIABLE

TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, RELIANCE,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES OR COVER, OR LOSS

OF PROFIT, REVENUE OR USE, IN CONNECTION WITH, ARISING OUT

OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR

LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY

LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

BUYER SHALL INSPECT FOR NONCONFORMITY PROMPTLY UPON

RECEIPT. Failure by buyer to give Formica Corporation written notice of claim within 30 days from date of delivery or, in the case of non-delivery from the date fixed for delivery, shall constitute a waiver by buyer of all claims in respect of such products.

This limited warranty gives purchaser of Formica Brand Laminate specific legal rights. Other rights may be available and vary from state to state.

Any information or suggestion concerning application, specifica-tions or compliances with codes and standards is provided solely for your convenient reference and without any representation as to accuracy or suitability. Formica Corporation disclaims any legal responsibility. The user must verify and test the suitability of any information or products for their own particular purpose of specific application.

MANUFACTURER

Formica Brand Laminate sheets are manufactured by Formica Corporation.

Formica Corporation

10155 Reading Road

Cincinnati, Ohio 45241-5279

TECHNICAL SERVICES

Technical assistance may be obtained through your local Formica®

Brand Products Distributor or from Formica Corporation trained representatives in sales offices throughout the country. To assist these representatives, Formica Corporation maintains a sales and technical services staff in Cincinnati, Ohio. For technical assistance, contact your distributor or sales representative; write the company directly at Formica Corporation Technical Services Department, 10155 Reading Road, Cincinnati, OH, 45241; call (513) 786-3578 or 1-800-FORMICA™; or fax (513) 786-3195. In Canada, call

1-800-363-1405. In Mexico, call (525) 530-3135.

Formica is a sublicensed trademark to Formica Corporation. Formica and the Formica Anvi l logo are registered trademarks of The Dil ler Corporation. 1-800-FORMICA is a trademark of The Dil ler Corporation. The products and manufacturing processes of Formica Corporation are protected under U.S. and foreign patents.

Al l ® brands are registered trademarks of the respective owners.

Al l ™ brands are trademarks of the respective owners.

For warranty information, please visit www.formica.com or cal l 1-800-FORMICA™.

GreenGuard Environmental Institute Formica® high-pressure laminate (HPL) is GreenGuard Indoor Air Qual ity Cer ti f ied under the GreenGuard Standard for Low-Emitting Products.

©2010 Formica Corporation Cincinnati, Ohio 45241 (04/10)

FORMICA® LAMINATE BY FORMICA GROUP

TECHNICAL DATA (GENERAL PUPOSE GRADE 10 AND POST-FORMING GRADES 12 & 20) CONTINUEDPLAM-1 (CONT.)

PT-1, PT-2, PTB-1

Products Tile Catalog Florenza™

Field Tile

Sabbia

FZ01

Pre-Consumer*: 5.0% Post-Consumer: 0.0% Manuf.: Imported, > 500 mi.

Oliva

FZ02

Pre-Consumer*: 5.0% Post-Consumer: 0.0% Manuf.: Imported, > 500 mi.

Brun

FZ03

Pre-Consumer*: 5.0% Post-Consumer: 0.0% Manuf.: Imported, > 500 mi.

Azzurro

FZ04

Pre-Consumer*: 5.0% Post-Consumer: 0.0% Manuf.: Imported, > 500 mi.

Decorative Accents

Sabbia/Brun Accent 3" x 12"

FZ10

Pre-Consumer*: 0.0% Post-Consumer: 0.0% Manuf.: Imported, > 500 mi.

Oliva/Azzurro Accent 3" x 12"

FZ11

Pre-Consumer*: 0.0% Post-Consumer: 0.0% Manuf.: Imported, > 500 mi.

Florenza™

Page 1 of 3Daltile Florenza™ ColorBody Porcelain Tile

9/13/2011http://www.daltile.com/seriesprinter.cfm?series=223

Relative Price: Medium/High

Shade Variation: Random (V4)

Tile Thickness: 5/16"

Recommended Grout Width: 1/8” (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)

Test Results:

C.O.F.

Wet Dry

Moisture Absorption

Breaking Strength MOH's

> 0.6 > 0.7 < 0.5% > 450 lbs 8

Notes:

Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim, and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Strong random shading enhances the natural beauty of this product. To achieve optimal results, tile should be selected from multiple cartons and shading arrangements planned prior to installations.

Use of a latex modified thin-set is recommended when installing porcelain tile.• Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powered pigments from lodging in the pores of the tile surface.

Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20 x 20, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.

Tile Sizes:

3 x 12 Decorative Accent (2 3/4" x 11 3/4") (6.9 cm x 29.8 cm) Pieces: 10

12 x 12 Field Tile (11 3/4" x 11 3/4") (29.8 cm x 29.8 cm) Pieces: 12

SQFT: 11.62

12 x 24 Field Tile (11 3/4" x 23 1/2") (29.8 cm x 29.8 cm) Pieces: 6

SQFT: 11.62

18 x 18 Field Tile (17 5/8" x 17 5/8") (44.8 cm x 44.8 cm) Pieces: 6

SQFT: 13.08

24 x 24 Field Tile (23 1/2" X 23 1/2") (29.8 cm x 29.8 cm) Pieces: 4

SQFT: 15.50

* Special consideration needs to be given when installing tiles 20" and larger. Please refer to www.daltileproducts.com/LargeTiles for additional information.

Page 2 of 3Daltile Florenza™ ColorBody Porcelain Tile

9/13/2011http://www.daltile.com/seriesprinter.cfm?series=223

PT-1, PT-2, PTB-1 (CONT’D)

Relative Price: Medium/High

Shade Variation: Random (V4)

Tile Thickness: 5/16"

Recommended Grout Width: 1/8” (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)

Test Results:

C.O.F.

Wet Dry

Moisture Absorption

Breaking Strength MOH's

> 0.6 > 0.7 < 0.5% > 450 lbs 8

Notes:

Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim, and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Strong random shading enhances the natural beauty of this product. To achieve optimal results, tile should be selected from multiple cartons and shading arrangements planned prior to installations.

Use of a latex modified thin-set is recommended when installing porcelain tile.• Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powered pigments from lodging in the pores of the tile surface.

Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20 x 20, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.

Tile Sizes:

3 x 12 Decorative Accent (2 3/4" x 11 3/4") (6.9 cm x 29.8 cm) Pieces: 10

12 x 12 Field Tile (11 3/4" x 11 3/4") (29.8 cm x 29.8 cm) Pieces: 12

SQFT: 11.62

12 x 24 Field Tile (11 3/4" x 23 1/2") (29.8 cm x 29.8 cm) Pieces: 6

SQFT: 11.62

18 x 18 Field Tile (17 5/8" x 17 5/8") (44.8 cm x 44.8 cm) Pieces: 6

SQFT: 13.08

24 x 24 Field Tile (23 1/2" X 23 1/2") (29.8 cm x 29.8 cm) Pieces: 4

SQFT: 15.50

* Special consideration needs to be given when installing tiles 20" and larger. Please refer to www.daltileproducts.com/LargeTiles for additional information.

Page 2 of 3Daltile Florenza™ ColorBody Porcelain Tile

9/13/2011http://www.daltile.com/seriesprinter.cfm?series=223

Copyright 2011 Daltile. All Rights Reserved. | Legal Notice | Ethical Code of Conduct Homeowners | Dealers & Builders

Available Trim

Bullnose S-44C9 4" x 12"

Cove Base S-36C9T 6" x 12"

Outcorner

SC-36C9T

1" x 6"

Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

For additional application information, refer to our "Factors to Consider" by clicking HERE.

Our Products | Product Search | Tile Effects & Design Services | Order Samples | MSDS | Arch Rep Search Project Photo Gallery | Locate Us | Design Tools | Contact Us | Warranty

Page 3 of 3Daltile Florenza™ ColorBody Porcelain Tile

9/13/2011http://www.daltile.com/seriesprinter.cfm?series=223

RB-1

P r o d u c t S p e c i f i c a t i o n

VENT BASE PS 060406 © 2006 Johnsonite, Inc. A Tarkett Company.

Vent Cove© Wall Base

1. PROPRIETARY PRODUCT/MANUFACTURER

1.1 Proprietary Product: Resilient Vent Cove Wall Base

1.2 Manufacturer:

Johnsonite, Inc., 16910 Munn Road Chagrin Falls, Ohio 44023

Phone: (800) 899-8916

(440) 543-8916

Fax: (440) 543-8920 Tech: Ext 297 Samples: Ext 299 Web: www.johnsonite.com E-mail: info@johnsonite.com

1.3 Proprietary Product Description:

1.3.1 Construction: Johnsonite Vent Cove Wall Base is

manufactured from a homogeneous composition of 100% synthetic rubber, high quality additives, and colorants designed specifically to meet the performance requirements of ASTM F- 1861, Type TS, Group 1 (solid) Standard Specification for Resilient Wall Base. Vent Cove Wall Base is designed for hardwood floating floor constructions and is equipped with vertical, semi-circular vents along the back side of the wall base to ensure proper air circulation under the floor and permits free expansion of the floor. Outside corners with 3-1/16" (9.37 cm) returns are available.

1.3.2 Physical Characteristics:

Size: 4" (10.16 cm) high by 5/16" (7.94 mm) thick coved profile with a 3" (7.62 cm) long by 3/8" (9.53 mm) thick toe. Back surface grooved with vertical semi-circular (5/32" radius) vents (15 vents per 4 ft. length). Length: 4' (1.22 m) Packaging: 16 lengths per carton

2. PRODUCT PERFORMANCE AND TECHNICAL DATA

2.1 Hardness: ASTM D 2240 − Not less than 85 Shore A

2.2 Fire Resistance: Meets ASTM E 648 − Class I

2.3 Meets or exceeds the performance requirements for

resistance to heat/light aging, chemicals, and dimensional stability when tested to the methods as described in ASTM F- 1861.

3. INSTALLATION

The installation of Johnsonite Vent Cove Wall Base should not begin until the work of all other trades has been completed, especially overhead trades. Areas to receive wall base shall be clean, fully enclosed, weathertight, and maintained at a uniform temperature of at least 650 F for 24 hours before, during, and after the installation is completed. The wall base and adhesives shall be conditioned in the same manner. Floors and walls shall be clean, dry, free of dust, all paints, wallpaper, and all other foreign material, which may affect proper adhesive bonding. Vent Cove Wall Base may be installed on interior plaster, gypsum wallboard, concrete, masonry, mineral-reinforced cement board or similar porous surfaces with manufacturer's recommended adhesive. For porous and nonporous surfaces, the product can be installed utilizing #8, 1-1/2" oval head chrome screws with chrome finish washers on 12" centers (minimum 4 screws per 4

ft. length).

3.1 Adhesives:

Porous Surfaces

Johnsonite 960 Acrylic Cove Base Adhesive Application: 1/8" square notch trowel Coverage: approximately 250 linear feet of 4" Wall Base

Non-porous Surfaces

Johnsonite 945 Contact Bond Adhesive Application: Brush or roller Coverage: approximately 360 sq ft /gallon

3.2 Installation Manual: Refer to Johnsonite Vent Cove Wall

Base Installation Instructions for complete installation details.

4. AVAILABILITY AND COST

4.1 Available through authorized Johnsonite distributors

nationwide.

5. WARRANTY

5.1 Limited 1 year warranty. For complete details, contact

Johnsonite or an authorized Johnsonite distributor.

6. MAINTENANCE

6.1 Refer to Johnsonite Vent Cove Wall Base Installation &

Maintenance Instructions for complete maintenance details.

7. TECHNICAL SERVICES

7.1 Samples: Submittal samples for verification and approval

available upon request from Johnsonite. Samples shall be submitted in compliance with the requirements of the Contract Documents. Accepted and approved samples shall constitute the standard materials which represent materials installed on the project.

7.2 For current Installation and Maintenance Instructions, Product Specifications, and other technical data, visit us on the web at www.johnsonite.com or contact Johnsonite at 1-800-899-8916.

RST-1

P r o d u c t S p e c i f i c a t i o n

096519 RESILIENT TILE FLOORING

RUBBER STAIR TREADS

Revision 10 Released January 2011 Page 1 of 3 RUBBER TREAD PS 012811

1. PROPRIETARY PRODUCT/MANUFACTURER

1.1. Proprietary Product: Resilient Rubber Stair Treads A.D.A., Visually-Impaired, and California Title 24 Compliant

1.2. Manufacturer:

Johnsonite, Inc. Phone (800) 899-8916 16910 Munn Road (440) 543-8916 Chagrin Falls, Ohio 44023 Tech: Ext 9297 Web: www.johnsonite.com Samples: Ext 9299 Email:

info@johnsonite.com

Fax: (440) 543-8920

1.3. Proprietary Product Description:

1.3.1. Construction: Johnsonite Rubber Stair Treads are

manufactured from a homogeneous composition of 100% synthetic rubber, high quality additives, and colorants to meet the performance requirements of ASTM F-2169 Standard Specification for Resilient Stair Treads, Type TS, Class 1 and 2, Group 1 and 2. All Johnsonite Stair Treads are available with a 2" (5.08 cm) wide strip of contrasting color to comply with A.D.A., Visually-Impaired, and California Title 24 requirements. Standard formulation exceeds ASTM E 648 Class 1 Flammability requirements.

Johnsonite Rubber Stair Treads are designed for interior applications only and not recommended for environments where the product will be exposed to animal fats, vegetable oils, or petroleum based materials. (i.e.: commercial kitchens)

1.3.2. Styles:

RTR-RD & VIRTR-RD (Visually Impaired) - Roundel Round Raised Disk Pattern Rubber Stair Tread with Integrated Riser, 20" (51 cm) overall length, 2" (5.08 cm) hinged, square nose configuration, .210" (5.33 mm) to .153" (3.89

mm) tapered 13" (33 cm) tread depth with 7" (17.8 cm ) integral riser

VIRTR-RD with 2" (5.0 cm) wide contrasting color grit tape insert VIRTRS-RD with 2" (5.0 cm) wide contrasting solid rubber color insert strip VIRTRP-RD with 2" (5.0 cm) wide contrasting marbleized rubber color insert strip

RTR-SQ & VIRTR-SQ (Visually Impaired) - Roundel Square Raised Disk Pattern Rubber Stair Treads with Integrated Riser, 2" (5.08 cm) hinged, square nose configuration, .210" (5.33 mm) to .153" (3.89 mm) tapered 13" (33 cm) tread depth with 7" (17.8 cm ) integral riser

VIRTR-SQ with 2" (5.0 cm) wide contrasting color grit tape insert VIRTRS-SQ with 2" (5.0 cm) wide contrasting solid rubber color insert strip VIRTRP-SQ with 2" (5.0 cm) wide contrasting marbleized rubber color insert strip

HTR & VIHTR (Visually Impaired) - Hammered Surface Texture Rubber Stair Tread with Integrated Riser, 2" (5.08

cm) hinged, square nose configuration, .210" (5.33 mm) to .153" (3.89 mm) tapered 13" (33 cm) tread depth with 7" (17.8 cm) integral riser

VIHTR with 2" (5.0 cm) wide contrasting color grit tape insert.

VIHTRS with 2" (5.0 cm) wide contrasting solid rubber color insert strip VIHTRP with 2" (5.0 cm) wide contrasting marbleized rubber color insert strip

BMTR & VIBMTR (Visually Impaired) - Bamboo Surface Texture Rubber Stair Tread with Integrated Riser, 2" (5.08

cm) hinged, square nose configuration, .210" (5.33 mm) to .153" (3.89 mm) tapered 13" (33 cm) tread depth with 7" (17.8 cm) integral riser

VIBMTR with 2" (5.0 cm) wide contrasting color grit tape insert VIBMTRS with 2" (5.0 cm) wide contrasting…