NYS DOT Standard Specifications (USC).pdf

STANDARD

SPECIFICATIONS

(US CUSTOMARY UNITS)

CONSTRUCTION

AND

MATERIALS

January 1, 2019

50 Wolf Road Albany, New York 12232 www.dot.ny.gov

INTRODUCTION

This publication has been prepared to provide a compilation of standard requirements, called Specifications, used by the New York State Department of Transportation for construction contracts. These specifications are written to the Contractor. They define the Contractor’s responsibility in meeting each specification, enumerate the Department’s expectations and how they are going to measure and pay, and explain what the Contractor is expected to provide.

When this publication, entitled Standard Specifications (USC) and dated as shown on the Title Page, is incorporated by reference into the Department’s construction contracts, it is made a part of that contract. The requirements stated herein may be revised or amended from time to time by notes or special specifications or documents of any description that would be furnished as part of a construction contract.

STATE OF NEW YORK

DEPARTMENT OF TRANSPORTATION

ENGINEERING DIVISION

Contained herein are:

General Provisions of Contract;

Contract forms of Proposal, Agreement and Bonds;

General Construction Specifications;

Materials of Construction;

Payment Items

Adopted by

The Commissioner of Transportation and Short Titled

"STANDARD SPECIFICATIONS" (USC)

Note: While these specifications may be used for general construction work, they have been compiled in US customary units with particular emphasis placed upon their use for highways, parkways, bridges and similar work. Necessary modifications of the contents hereof will be incorporated in the "Contract Documents" covering dissimilar work.

TABLE OF CONTENTS

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

Section 100

GENERAL PROVISIONS

SECTION 101 - ABBREVIATIONS AND DEFINITIONS OF TERMS

101-01 ABBREVIATIONS OF TERMS

SECTION 102 - BIDDING REQUIREMENTS AND CONDITIONS

102-01 LOCATION OF REGIONAL OFFICES

102-02 EXAMINING THE CONTRACT DOCUMENTS AND THE WORK SITE

102-04 PROPOSAL CONTENT

102-05 PROPOSAL SUBMISSION

102-06 BID DEPOSIT

102-07 MODIFICATION OR WITHDRAWAL OF PROPOSAL

102-08 SAMPLE APPENDIX A - STANDARD CLAUSES FOR ALL NEW YORK STATE

CONTRACTS

102-09 VACANT

102-10 LABOR AND EMPLOYMENT

102-11 EQUAL EMPLOYMENT OPPORTUNITY REQUIREMENTS

102-12 D/M/WBE UTILIZATION

102-13 STATE AND LOCAL SALES TAX EXEMPTION

102-14 FORM OF CONTRACT AND BID BOND

102-15 SAMPLE FORM OF BID BOND

102-16 SAMPLE CONTRACT PAY ITEM FORMAT

102-17 SAMPLE FORM OF ITEMIZED PROPOSAL/JURAT

SECTION 103 CONTRACT AWARD AND EXECUTION

103-02 EXECUTION OF CONTRACT

103-03 CONTRACT BONDS

103-04 CANCELING AWARD

103-05 PARTNERING

103-06 SAMPLE FORM OF CONTRACT AGREEMENT

103-07 SAMPLE FORM OF FAITHFUL PERFORMANCE BOND

103-08 SAMPLE FORM OF LABOR AND MATERIAL BOND

SECTION 104 - SCOPE OF WORK

104-01 WORK REQUIRED

104-02 CHANGES, CONTINGENCIES, EXTRA WORK AND DEDUCTIONS

104-03 DIFFERING SITE CONDITIONS

104-04 SIGNIFICANT CHANGES IN THE CHARACTER OF WORK

104-05 SUSPENSIONS OF WORK DIRECTED BY THE ENGINEER

104-06 NOTICE AND RECORDKEEPING

104-07 SITE HOUSEKEEPING

104-08 MAINTAINING TRAFFIC

104-09 CONTRACTOR’S RETENTION OF RECORDS

104-10 VALUE ENGINEERING CHANGE PROPOSAL (VECP)

SECTION 105 - CONTROL OF WORK

105-01 ENGINEER'S AUTHORITY

105-02 CHARACTER OF WORKERS

105-03 METHODS AND EQUIPMENT

105-04 CONTRACT DOCUMENTS

105-05 VENDOR RESPONSIBILITY

105-07 TERMINATION

105-08 REMOVAL OF UNACCEPTABLE AND UNAUTHORIZED WORK

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

105-09 WORK AFFECTING RAILROADS

105-10 SURVEY AND STAKEOUT

105-11 INSPECTION

105-12 LOAD RESTRICTIONS

105-13 WORK ZONE TRAFFIC CONTROL FOR MOBILE OPERATIONS

105-14 DISPUTED WORK AND DISPUTE RESOLUTION

105-15 FURNISHING RIGHT OF WAY

105-16 SHOP DRAWING APPROVAL

105-17 CONTRACT RECORDS

105-18 MANUFACTURER WARRANTIES AND GUARANTEES

105-19 CONTRACTOR WARRANTIES

105-20 OPENING HIGHWAY TO TRAFFIC PRIOR TO CONTRACT FINAL

ACCEPTANCE

105-21 CIVIL RIGHTS MONITORING AND REPORTING

SECTION 106 - CONTROL OF MATERIAL

106-01 SOURCES OF SUPPLY

106-03 PLANT INSPECTED MATERIALS

106-04 MATERIAL CERTIFICATION AND APPROVED LIST

106-05 RECYCLED MATERIALS

106-06 STORAGE AND HANDLING OF MATERIALS

106-07 BASIS FOR MEASUREMENT

106-08 REJECTED MATERIALS

106-09 EQUIVALENTS

106-10 QUALITY ASSURANCE

106-11 BUY AMERICA

SECTION 107 - LEGAL RELATIONS AND RESPONSIBILITY TO PUBLIC

107-01 LAWS, RULES, REGULATIONS AND PERMITS

107-02 PATENTED DEVICES, MATERIALS AND PROCESSES

107-03 FEDERAL AID PARTICIPATION

107-04 PUBLIC NOTICES

107-05 SAFETY AND HEALTH REQUIREMENTS

107-06 INSURANCE

107-07 PROTECTION OF UNDERGROUND FACILITIES

107-08 PROTECTION AND RESTORATION OF PROPERTY AND LANDSCAPE

107-09 DAMAGE

107-10 MANAGING SURPLUS MATERIAL AND WASTE

107-11 AIR QUALITY PROTECTION

107-12 WATER QUALITY PROTECTION

107-13 USE OF UNITED STATES-FLAG VESSELS

SECTION 108 - PROSECUTION AND PROGRESS

108-01 PROGRESS SCHEDULE

108-02 COMPLETION DATE

108-03 FAILURE TO COMPLETE WORK ON TIME

108-04 DELAY PROVISIONS

108-05 SUBLETTING OR ASSIGNING THE CONTRACT

108-06 COMMENCEMENT OF ACTIONS ON STATE PUBLIC WORKS CONTRACTS.

108-07 SEASONAL SHUT-DOWN

SECTION 109 - MEASUREMENT AND PAYMENT

109-01 MEASURING QUANTITIES

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

109-02 COMPENSATION FOR ALTERED QUANTITIES

109-03 SCOPE OF PAYMENT

109-05 EXTRA WORK AND TIME RELATED COMPENSATION

109-06 CONTRACT PAYMENTS

109-07 PROMPT PAYMENTS BY THE CONTRACTOR

109-08 ELIMINATED MATERIALS

109-09 FINAL ACCEPTANCE AND FINAL AGREEMENT

109-10 UNCOMPLETED WORK AGREEMENTS

Section 200

EARTHWORK

SECTION 201 - CLEARING AND GRUBBING

SECTION 202 - DEMOLITION OF BUILDINGS AND STRUCTURES

SECTION 203 - EXCAVATION AND EMBANKMENT

SECTION 204 - FLOWABLE FILL

SECTION 205 - CONTAMINATED SOIL

SECTION 206 - TRENCH, CULVERT AND STRUCTURE EXCAVATION

SECTION 207 - GEOSYNTHETICS

SECTION 208 - STORMWATER MANAGEMENT FACILITIES

SECTION 209 - SOIL EROSION AND SEDIMENT CONTROL

SECTION 210 - REMOVAL AND DISPOSAL OF ASBESTOS-CONTAINING

MATERIAL (BUILDINGS, BRIDGES AND HIGHWAYS)

SECTION 211 - INTERNALLY STABILIZED CUT STRUCTURES

SECTION 212 – ROCK SLOPE REINFORCEMENT AND CATCHMENT SYSTEMS

SECTIONS 213 THRU 299 (VACANT)

Section 300

BASES AND SUBBASES

SECTION 301 (VACANT)

SECTION 302 - BITUMINOUS STABILIZED COURSE

SECTION 303 (VACANT)

SECTION 304 - SUBBASE COURSE

SECTIONS 305 AND 306 (VACANT)

SECTION 307 - HYDRATED LIME STABILIZED SUBGRADE

SECTION 308 - SOIL CEMENT COURSE

SECTIONS 309 THRU 399 (VACANT)

Section 400

HOT MIX ASPHALT

SECTION 401 - PLANT PRODUCTION

SECTION 402 - HOT MIX ASPHALT (HMA) PAVEMENTS

SECTION 403 (VACANT)

SECTION 404 (VACANT)

SECTION 405 - COLD MIX BITUMINOUS PAVEMENT (OPEN GRADED)

SECTION 406 (VACANT)

SECTION 407 - TACK COAT

SECTIONS 408 AND 409 (VACANT)

SECTION 410 – CHIP SEAL

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

SECTION 411 - STABILIZED GRAVEL SURFACE COURSE

SECTION 412 - CRACK SEALING ASPHALT PAVEMENTS

SECTION 413 - MICRO-SURFACING

SECTION 414 - QUICK-SET SLURRY

SECTION 415 - PAVER PLACED SURFACE TREATMENT

SECTION 416 - COLD RECYCLING

SECTION 417 – HOT MIX ASPHALT USING RECYCLING TREATMENTS

SECTION 418 – ASPHALT PAVEMENT JOINT ADHESIVE

SECTION 419 - FOG SEAL

SECTION 420 - POROUS ASPHALT PAVEMENT

SECTIONS 421 THRU 489 - (VACANT)

SECTION 490 - COLD MILLING

SECTIONS 491 THRU 499 (VACANT)

Section 500

PORTLAND CEMENT CONCRETE

SECTION 501 - PORTLAND CEMENT CONCRETE - GENERAL

SECTION 502 - PORTLAND CEMENT CONCRETE PAVEMENT

SECTION 503 - PORTLAND CEMENT CONCRETE FOUNDATION FOR

PAVEMENT

SECTIONS 504 THRU 549 (VACANT)

Section 550

STRUCTURES

SECTION 551 - PILES AND PILE DRIVING EQUIPMENT

SECTION 552 - EXTERNALLY STABILIZED CUT STRUCTURES

SECTION 553 - COFFERDAMS AND WATERWAY DIVERSION STRUCTURES 418

SECTION 554 - FILL TYPE RETAINING WALLS

SECTION 555 - STRUCTURAL CONCRETE

SECTION 556 - REINFORCING STEEL FOR CONCRETE STRUCTURES

SECTION 557 - SUPERSTRUCTURE SLABS, SIDEWALKS ON BRIDGES, AND

STRUCTURAL APPROACH SLABS

SECTION 558 - LONGITUDINAL SAWCUT GROOVING OF STRUCTURAL SLAB

SURFACE

SECTION 559 - PROTECTIVE COATINGS AND GRAFFITI REMOVAL

SECTION 560 - MASONRY

SECTION 561 (VACANT)

SECTION 562 - REINFORCED CONCRETE THREE-SIDED STRUCTURES

SECTION 563 - PRESTRESSED CONCRETE UNITS (STRUCTURAL)

SECTION 564 - STRUCTURAL STEEL

SECTION 565 - BRIDGE BEARINGS

SECTION 566 - MODULAR EXPANSION JOINT SYSTEMS

SECTION 567 - BRIDGE JOINT SYSTEMS

SECTION 568 - BRIDGE RAILING

SECTION 569 - PERMANENT CONCRETE TRAFFIC BARRIER FOR

STRUCTURES

SECTION 570 - PAINT REMOVAL OPERATIONS

SECTION 571 - DISPOSAL OF PAINT REMOVAL WASTE

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

SECTION 572 - STRUCTURAL STEEL PAINTING: SHOP APPLIED

SECTION 573 - STRUCTURAL STEEL PAINTING: FIELD APPLIED - TOTAL

REMOVAL

SECTION 574 - STRUCTURAL STEEL PAINTING: OVERCOATING AND

LOCALIZED

SECTION 575 (VACANT)

SECTION 576 - BRIDGE DRAINAGE SYSTEM

SECTION 577 (VACANT)

SECTION 578 - BONDED CONCRETE OVERLAY FOR STRUCTURAL SLABS . 570

SECTION 579 - STRUCTURAL SLAB RECONSTRUCTION PREPARATION

SECTION 580 - REMOVAL OF STRUCTURAL CONCRETE

SECTION 581 - REMOVAL OF BRIDGE OVERLAYS

SECTION 582 - REMOVAL AND REPLACEMENT OF STRUCTURAL CONCRETE

SECTION 583 - SHOTCRETE

SECTION 584 - SPECIALIZED OVERLAYS FOR STRUCTURAL SLABS

SECTION 585 - STRUCTURAL LIFTING OPERATIONS

SECTION 586 - MISCELLANEOUS STRUCTURAL RECONSTRUCTION

SECTION 587 - BRIDGE RAILING RECONSTRUCTION

SECTION 588 - BRIDGE JOINT REHABILITATION

SECTION 589 - REMOVAL OF STRUCTURAL STEEL

SECTION 590 - ADJUSTMENT OF BRIDGE APPURTENANCES

SECTIONS 591 THRU 593 (VACANT)

SECTION 594 - TIMBER AND LUMBER

SECTION 595 - WATERPROOFING SYSTEMS FOR STRUCTURES

SECTION 596 - OPEN STEEL FLOOR

SECTION 597 - TIMBER BRIDGE RAILING AND TRANSITIONS

SECTIONS 598 AND 599 (VACANT)

Section 600

INCIDENTAL CONSTRUCTION

SECTION 601 - ARCHITECTURAL PAVEMENTS AND TREATMENTS

SECTION 602 - REHABILITATION OF CULVERT AND STORM DRAIN PIPE

SECTION 603 - CULVERTS AND STORM DRAINS

SECTION 604 - DRAINAGE STRUCTURES

SECTION 605 - UNDERDRAINS

SECTION 606 - GUIDE RAILING, MEDIAN BARRIER, AND CONCRETE BARRIER

SECTION 607 - FENCES

SECTION 608 - SIDEWALKS, DRIVEWAYS, BICYCLE PATHS, AND

VEGETATION CONTROL STRIPS

SECTION 609 - CURB AND CURB & GUTTER

SECTION 610 - GROUND VEGETATION - PREPARATION, ESTABLISHMENT

AND MANAGEMENT

SECTION 611 - PLANTING, TRANSPLANTING AND POST PLANTING CARE .. 688

SECTION 612 (VACANT)

SECTION 613 - WILDLIFE AND ECOLOGY

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

SECTION 614 - PRUNING, IMPROVING AND REMOVING EXISTING

VEGETATION

SECTION 615 - LANDSCAPE APPURTENANCES

SECTION 616 - SOIL BIOENGINEERING

SECTION 617 - INVASIVE SPECIES MANAGEMENT

SECTION 618 (VACANT)

SECTION 619 - WORK ZONE TRAFFIC CONTROL

SECTION 620 - BANK AND CHANNEL PROTECTION

SECTION 621 - CLEANING CULVERTS, DRAINAGE STRUCTURES AND

EXISTING ROADSIDE SECTIONS

SECTION 622 - BUILDINGS AND MISCELLANEOUS STRUCTURES

SECTION 623 - SCREENED GRAVEL, CRUSHED GRAVEL, CRUSHED STONE,

CRUSHED SLAG

SECTION 624 - PAVED GUTTERS

SECTION 625 - SURVEY OPERATIONS

SECTIONS 626 THRU 628 (VACANT)

SECTION 629 - PETROLEUM STORAGE TANK CLOSURE

SECTION 630 - BARRICADES

SECTION 631 (VACANT)

SECTION 632 (VACANT)

SECTION 633 - CONDITIONING EXISTING PAVEMENT PRIOR TO HOT MIX

ASPHALT (HMA) OVERLAY

SECTION 634 (VACANT)

SECTION 635 - CLEANING AND PREPARATION OF PAVEMENT SURFACES

FOR PAVEMENT MARKINGS

SECTION 636 (VACANT)

SECTION 637 - ENGINEER’S FIELD OFFICE, LABORATORY AND EQUIPMENT

SECTION 638 - WHITE SYNTHETIC RESIN BINDER CONCRETE

SECTION 639 - CONSTRUCTION CONTRACT MANAGEMENT SYSTEMS

SECTION 640 - REFLECTORIZED PAVEMENT MARKING PAINTS

SECTION 641 - BRIDGE WASHING

SECTION 642 - ROADSIDE MAINTENANCE

SECTION 643 - NOISE BARRIERS

SECTION 644 - OVERHEAD SIGN STRUCTURES

SECTION 645 - SIGNS

SECTION 646 - DELINEATORS, REFERENCE MARKERS AND SNOWPLOWING

MARKERS

SECTION 647 - REMOVING, STORING, AND RELOCATING SIGNS, SIGN PANEL

ASSEMBLIES, SIGN SUPPORTS, AND FOUNDATIONS

SECTION 648 - SUBSURFACE EXPLORATIONS

SECTION 649 - AUDIBLE ROADWAY DELINEATORS

SECTION 650 - TRENCHLESS INSTALLATION OF CASING

SECTION 651 - COMMUNICATION FACILITIES

SECTION 652 - FURNISHING AND APPLYING SALTS

SECTION 653 (VACANT)

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

SECTION 654 - IMPACT ATTENUATORS - PERMANENT

SECTION 655 - FRAMES, GRATES AND COVERS

SECTION 656 - MISCELLANEOUS METALS

SECTION 657 – PAINTING GALVANIZED AND ALUMINUM SURFACES

SECTION 658 - WATER WELLS

SECTION 659 - TELECOMMUNICATION UTILITIES

SECTION 660 - UTILITIES

SECTION 661 - ELECTRIC UTILITIES

SECTION 662 - GAS, OIL & STEAM UTILITIES

SECTION 663 - WATER SUPPLY UTILITIES

SECTION 664 - SANITARY SEWER UTILITIES

SECTION 665 - WATERWAYS

SECTION 666 (VACANT)

SECTION 667 - LOCAL ROAD GRAVEL SURFACE, BASE, AND SUBBASE

COURSES

SECTIONS 668 AND 669 (VACANT)

SECTION 670 - HIGHWAY LIGHTING SYSTEM

SECTIONS 671 THRU 674 (VACANT)

SECTION 675 - RAILROAD TRACK AND APPURTENANCES

SECTIONS 676 THRU 679 (VACANT)

SECTION 680 - TRAFFIC SIGNALS

SECTION 681 AND 682 (VACANT)

SECTION 683 - INTELLIGENT TRANSPORTATION SYSTEMS

SECTION 684 (VACANT)

SECTION 685 - EPOXY REFLECTORIZED PAVEMENT MARKINGS

SECTION 686 (VACANT)

SECTION 687 - THERMOPLASTIC REFLECTORIZED PAVEMENT MARKINGS 914

SECTION 688 - PREFORMED REFLECTORIZED PAVEMENT MARKINGS

SECTION 689 (VACANT)

SECTION 690 - SPECIALTY WORK

SECTIONS 691 THRU 695 - (VACANT)

SECTION 696 - CONTRACTOR CHARGES

SECTION 697 - FIELD CHANGE PAYMENT

SECTION 698 - PRICE ADJUSTMENTS

SECTION 699 - MOBILIZATION

Section 700 MATERIALS and MANUFACTURING

SECTION 701 - HYDRAULIC CEMENTS

701-01 PORTLAND CEMENT

701-02 MASONRY AND MORTAR CEMENT

701-03 BLENDED PORTLAND CEMENT

701-04 CONCRETE REPAIR MATERIAL

701-05 CONCRETE GROUTING AND ANCHORING MATERIAL

701-06 SHEAR KEY GROUT

701-07 ANCHORING MATERIALS - CHEMICALLY CURING

701-08 VERTICAL AND OVERHEAD REPAIR MATERIAL

701-09 CONCRETE REPAIR MATERIAL - RAPID HARDENING

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

701-10 DUCT GROUTING MATERIAL (STRUCTURES)

701-11 ELASTOMERIC CONCRETE

701-12 CONCRETE REPAIR MATERIAL - HIGH EARLY STRENGTH

701-13 RAPID HARDENING HYDRAULIC CEMENT

701-14 FOR SITE MANAGER USE

701-99 FOR SITE MANAGER USE

SECTION 702 - BITUMINOUS MATERIALS

702-05 FOR SITE MANAGER USE

702-07 FOR SITE MANAGER USE

702-09 FOR SITE MANAGER USE

702-11 THRU 702-16 FOR SITE MANAGER USE

702-20 THRU 702-25 FOR SITE MANAGER USE

702-30 THRU 702-38 FOR SITE MANAGER USE

702-40 THRU 702-48 FOR SITE MANAGER USE

702-50 FOR SITE MANAGER USE

702-52 FOR SITE MANAGER USE

702-58 FOR SITE MANAGER USE

702-64 FOR SITE MANAGER USE

702-70 FOR SITE MANAGER USE

702-71 FOR SITE MANAGER USE

702-76 FOR SITE MANAGER USE

702-82 FOR SITE MANAGER USE

702-90 FOR SITE MANAGER USE

702-99 FOR SITE MANAGER USE

SECTION 703 - AGGREGATES

703-01 FINE AGGREGATE

703-02 COARSE AGGREGATE

703-03 MORTAR SAND

703-04 GROUT SAND

703-05 FINE AGGREGATE FOR WHITE PORTLAND CEMENT CONCRETE

703-06 CUSHION SAND

703-07 CONCRETE SAND

703-08 MINERAL FILLER

703-09 (VACANT)

703-10 LIGHTWEIGHT AGGREGATES

703-90 FOR SITE MANAGER USE

703-91 FOR SITE MANAGER USE

703-99 FOR SITE MANAGER USE

SECTION 704 - MASONRY UNITS

704-01 COMMON BRICK

704-02 CONCRETE BRICK

704-03 PRECAST CONCRETE - GENERAL

704-04 CONCRETE BLOCK (SLOPE PAVING)

704-05 PRECAST CONCRETE BARRIER

704-06 PRECAST CONCRETE WALL UNITS AND PRECAST CONCRETE CRIBBING970

704-07 DRY CAST CONCRETE WALL UNITS

704-08 BRICK SIDEWALK AND DRIVEWAY PAVERS

704-09 STONE BLOCKS

704-10 SPLIT-FACED CONCRETE BRICK

704-11 PRECAST CONCRETE COPING

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

704-12 CONCRETE BLOCK

704-13 PRECAST CONCRETE DRIVEWAY AND SIDEWALK PAVERS

704-14 PRECAST CONCRETE PANEL UNITS (Mechanically Stabilized Earth System) 975

704-15 PRECAST CONCRETE PAVEMENT SLAB SYSTEMS

704-16 THRU 704-22 FOR SITE MANAGER USE

704-23 PRECAST CONCRETE STREET PAVERS

704-24 PRECAST CONCRETE PANELS

704-99 FOR SITE MANAGER USE

SECTION 705 - JOINT MATERIALS

705-01 PREFORMED CORK JOINT FILLER

705-02 HIGHWAY JOINT SEALANTS

705-03 PREFORMED RUBBER JOINT FILLER

705-04 ARMORLESS BRIDGE JOINTS

705-05 SILICONE JOINT SEALANTS FOR PAVEMENTS

705-06 CAULKING COMPOUND FOR STRUCTURES

705-07 PREMOLDED RESILIENT JOINT FILLER

705-08 PREFORMED, CLOSED-CELL FOAM MATERIAL

705-09 PREFORMED ELASTIC BRIDGE JOINT SEALER

705-10 PREFORMED ELASTIC LONGITUDINAL JOINT SEAL

705-11 POLYVINYL CHLORIDE EXTRUDED SHAPES AND SHEET MATERIAL

705-12 PREFORMED ELASTIC TRANSVERSE CONTRACTION AND EXPANSION

JOINT SEAL

705-13 LUBRICANT FOR PREFORMED ELASTIC JOINT SEALER

705-14 LONGITUDINAL JOINT TIES

705-15 TRANSVERSE JOINT SUPPORTS

705-16 CONCRETE PIPE JOINT SEALING COMPOUND

705-17 CONCRETE PIPE JOINT ELASTOMERIC GASKETS

705-18 ASPHALTIC PLUG JOINTS FOR BRIDGES

705-19 ASPHALT PAVEMENT JOINT ADHESIVE

705-20 FOR SITE MANAGER USE

705-21 MASONRY MORTAR

705-22 PORTLAND CEMENT MORTAR BONDING GROUT

705-99 FOR SITE MANAGER USE

SECTION 706 - CONCRETE, CLAY AND PLASTIC PIPE

706-01 NON-REINFORCED CONCRETE PIPE

706-02 REINFORCED CONCRETE PIPE CLASSES II, III, IV, V

706-03 REINFORCED CONCRETE ELLIPTICAL PIPE; CLASSES HE-II, HE-III, HE-IV,

VE-IV, VE-V AND VE-VI

706-04 PRECAST CONCRETE DRAINAGE UNITS

706-05 POROUS CONCRETE PIPE UNDERDRAIN

706-06 (VACANT)

706-07 REINFORCED CONCRETE PIPE END SECTIONS

706-08 POLYPROPYLENE PIPE

706-09 CURED IN PLACE PIPE (CIPP) LINER

706-10 POLYVINYL CHLORIDE PIPE (relining) 706-11 HIGH DENSITY POLYETHYLENE PIPE (relining)

706-12 SMOOTH INTERIOR CORRUGATED POLYETHYLENE PIPE

706-13 PERFORATED CORRUGATED POLYETHYLENE UNDERDRAIN TUBING

706-14 CORRUGATED INTERIOR POLYETHYLENE PIPE

706-15 PVC PLASTIC DRAIN PIPE SYSTEM

706-16 CELLULAR POLYSTYRENE PROTECTIVE COVER

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

706-17 PRECAST CONCRETE BOX CULVERTS

706-18 PERFORATED POLYVINYL CHLORIDE UNDERDRAIN PIPE

706-19 FOR SITE MANAGER USE

706-99 FOR SITE MANAGER USE

SECTION 707 - METAL PIPE

707-01 (VACANT)

707-02 CORRUGATED STEEL PIPE

707-03 DUCTILE IRON PIPE (NON-PRESSURE)

707-04 DUCTILE IRON PIPE (PRESSURE)

707-05 TUNNEL LINER PLATE (RELINING)

707-06 THRU 707-08 (VACANT)

707-09 CORRUGATED STRUCTURAL STEEL PLATE FOR PIPE, PIPE ARCHES AND

UNDERPASSES

707-10 GALVANIZED STEEL END SECTIONS

707-11 ALUMINUM END SECTIONS

707-12 (VACANT)

707-13 CORRUGATED ALUMINUM PIPE

707-14 CORRUGATED ALUMINUM STRUCTURAL PLATE FOR PIPE AND PIPE

ARCHES

707-15 THRU 707-19 (VACANT)

707-20 ANCHOR BOLTS FOR CORRUGATED CULVERTS

707-99 FOR SITE MANAGER USE

SECTION 708 - PAINTS

708-01 STRUCTURAL STEEL PAINTS CLASS 1

708-02 STRUCTURAL STEEL PAINTS CLASS 2

708-03 (VACANT)

708-04 ZINC CHROMATE PRIMER

708-05 STANDARD PAINT COLORS

708-06 PAINT FOR GALVANIZED SURFACES

708-07 PAINT FOR ALUMINUM SURFACES

708-08 THRU 708-29 (VACANT)

708-30 WOOD PRESERVATIVE – CREOSOTE OIL

708-31 WOOD PRESERVATIVE – WATERBORNE

708-32 WOOD PRESERVATIVE – OIL-BORNE

SECTION 709 - REINFORCING STEEL

709-01 BAR REINFORCEMENT, GRADE 60

709-02 WIRE FABRIC FOR CONCRETE REINFORCEMENT

709-03 FOR SITE MANAGER USE

709-04 EPOXY-COATED BAR REINFORCEMENT

709-05 STUD SHEAR CONNECTORS

709-06 LOW-RELAXATION PRESTRESSING STEEL, GRADE 270

709-07 STONE CURB ANCHOR BARS

709-08 EPOXY COATED WIRE FABRIC REINFORCEMENT

709-09 COLD-DRAWN WIRE FOR CONCRETE REINFORCEMENT

709-10 MECHANICAL CONNECTORS FOR REINFORCING BAR SPLICES

709-11 GALVANIZED BAR REINFORCEMENT

709-12 FOR SITE MANAGER USE

709-13 STAINLESS STEEL BAR REINFORCEMENT

709-14 BAR REINFORCEMENT, GRADE 75

709-15 GROUTED REINFORCING BAR SPLICE SLEEVES

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

709-16 FOR SITE MANAGER USE

709-99 FOR SITE MANAGER USE

SECTION 710 - FENCE AND GUIDE RAIL

710-01 ALUMINUM FENCE FABRIC

710-02 GALVANIZED STEEL FENCE FABRIC

710-03 VINYL COATED STEEL FENCE FABRIC

710-04 ALUMINUM COATED STEEL FENCE FABRIC

710-05 COATED STEEL FENCE FABRIC, (95% ZINC 5% ALUMINUM - MISCHMETAL

ALLOY)

710-06 ROCK SLOPE NET AND WIRE MESH ASSEMBLIES

710-07 THRU 710-09 (VACANT)

710-10 STEEL AND IRON POSTS, RAILS, BRACES, AND FITTINGS FOR CHAIN LINK

FENCE

710-11 ALUMINUM POSTS, RAILS, BRACES AND FITTINGS FOR CHAIN LINK FENCE

710-12 PLASTIC COATED POSTS, RAILS, BRACES AND FITTINGS FOR CHAIN LINK

FENCE

710-13 WOOD AND TIMBER POSTS AND TIMBER BLOCKOUTS

710-14 GALVANIZED STEEL BARRIER POSTS

710-15 AND 710-16 (VACANT)

710-17 CORRUGATED BEAM GUIDE RAILING END TERMINAL (ENERGY-

ABSORBING)

710-18 HPBO (Mod.) CORRUGATED BEAM GUIDE RAILING END TERMINAL (ENERGY

ABSORBING)

710-19 HPBO (Mod.) CORRUGATED BEAM MEDIAN BARRIER END TERMINAL

(ENERGY ABSORBING)

710-20 CORRUGATED BEAM GUIDE RAILING AND MEDIAN BARRIER

710-21 BOX BEAM GUIDE RAILING AND MEDIAN BARRIER

710-22 CABLE GUIDE RAILING

710-23 STEEL BRIDGE RAILING

710-24 BOX BEAM GUIDE RAIL END ASSEMBLY, TYPE III; AND BOX BEAM MEDIAN

BARRIER END ASSEMBLY, TYPE C

710-25 (VACANT)

710-26 PLASTIC AND SYNTHETIC BLOCK-OUTS FOR HEAVY POST GUIDERAIL

SYSTEMS

710-27 ROCK SLOPE WIRE ROPES

710-28 ANCHOR BOLTS FOR GUIDE RAILING AND MEDIAN BARRIER

710-29 (VACANT)

710-30 RIGHT-OF-WAY FENCING

710-99 FOR SITE MANAGER USE

SECTION 711 - CONCRETE CURING MATERIALS AND ADMIXTURES

711-01 FIBERS FOR CONCRETE REINFORCEMENT

711-02 QUILTED COVERS (FOR CURING)

711-03 PLASTIC COATED FIBER BLANKETS (FOR CURING)

711-04 POLYETHYLENE CURING COVER (WHITE OPAQUE)

711-05 MEMBRANE CURING COMPOUND

711-06 BURLAP

711-07 FORM INSULATING MATERIALS FOR COLD WEATHER CONCRETING

711-08 ADMIXTURES

711-09 EMULSIFIED CARBON BLACK

711-10 FLY ASH

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

711-11 MICROSILICA

711-12 GROUND GRANULATED BLAST- FURNACE SLAG

711-13 CALCIUM NITRITE BASED CORROSION INHIBITORS

711-14 HIGH REACTIVITY POZZOLAN

711-15 MISCELLANEOUS SUPPLEMENTARY CEMENTITIOUS MATERIALS

711-99 FOR SITE MANAGER USE

SECTION 712 - MISCELLANEOUS

712-01 WATER

712-02 CALCIUM CHLORIDE

712-03 SODIUM CHLORIDE

712-04 HYDRATED LIME

712-05 PRECAST CONCRETE RIGHT-OF-WAY MARKERS

712-06 EXPENDABLE IMPACT ATTENUATOR

712-07 INERTIAL BARRIER MODULES

712-08 REUSEABLE IMPACT ATTENUATOR

712-09 FOR SITE MANAGER USE

712-10 FOR SITE MANAGER USE

712-11 FOR SITE MANAGER USE

712-12 ASPHALT ROOFING FELT

712-13 TIMBER AND LUMBER

712-14 STRESS GRADED TIMBER AND LUMBER

712-15 GABIONS

712-16 PIGMENT FOR COLORED SYNTHETIC RESIN BINDER CONCRETE

712-17 WOOD CROSS TIES

712-18 THRU 712-23 FOR SITE MANAGER USE

712-24 PRECAST CONCRETE PERMANENT SURVEY MARKERS

712-99 FOR SITE MANAGER USE

SECTION 713 - LANDSCAPE DEVELOPMENT MATERIALS

713-01 TOPSOIL

713-02 LIMESTONE

713-03 FERTILIZER

713-04 SEEDS

713-05 MULCH FOR PLANTING

713-06 TREES, SHRUBS AND VINES

713-07 ROLLED EROSION CONTROL PRODUCTS AND SOIL STABILIZERS

713-08 MATERIALS FOR PROTECTION OF PLANTS

713-09 MYCORRHIZAL FUNGI

713-10 MOISTURE RETENTION ADDITIVE

713-11 MULCH FOR TURF ESTABLISMENT AND EROSION CONTROL

713-12 MULCH ANCHORAGE

713-13 PESTICIDES

713-14 SOD

713-15 COMPOST

713-16 (VACANT)

713-17 SULFUR

713-18 WEED CONTROL BARRIERS

713-19 STRAW

713-20 SEDIMENT FILTER LOGS

713-99 FOR SITE MANAGER USE

SECTION 714 - CURBING AND GUTTER

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

714-01 STONE CURB

714-02 AND 714-03 (VACANT)

714-04 PRECAST CONCRETE CURB

714-05 (VACANT)

714-06 HOT MIX ASPHALT CURB

714-07 PRECAST CONCRETE GUTTER

714-99 FOR SITE MANAGER USE

SECTION 715 - CASTINGS, FORGINGS AND METALS

715-01 STRUCTURAL STEEL

715-02 STEEL CASTINGS

715-03 ALUMINUM CASTINGS

715-04 WROUGHT ALUMINUM

715-05 IRON CASTINGS

715-06 STEEL FORGINGS

715-07 PROOF LOADED IRON CASTINGS

715-08 (VACANT)

715-09 MALLEABLE IRON CASTINGS

715-10 (VACANT)

715-11 METAL BIN TYPE RETAINING WALL

715-12 (VACANT)

715-13 PREFABRICATED ADJUSTMENT RINGS, FRAMES AND UTILITY VALVE

RISERS FOR DRAINAGE UNITS, MANHOLES AND UTILITIES

715-14 HIGH STRENGTH BOLTS, NUTS AND WASHERS

715-15 PINS AND ROLLERS

715-16 STAINLESS STEEL CONNECTING PRODUCTS

715-17 STEEL SHEETING

715-18 SOLDIER PILES

715-99 FOR SITE MANAGER USE

SECTION 716 - BEARINGS AND EXPANSION PLATES

716-01 THRU 716-02 (VACANT)

716-03 POLYETHER URETHANE STRUCTURAL ELEMENT

716-04 POLYTETRAFLUOROETHYLENE SHEET AND STRIP

716-05 SELF-LUBRICATING BRONZE PLATES

716-06 DISC-DESIGN STRUCTURAL BRIDGE BEARINGS

716-07 POT-DESIGN STRUCTURAL BRIDGE BEARINGS

716-08 (VACANT)

716-09 FOR SITE MANAGER USE

716-10 PLAIN ELASTOMERIC BRIDGE BEARINGS

716-11 STEEL LAMINATED ELASTOMERIC BRIDGE BEARINGS

716-12 ELASTOMERIC BRIDGE BEARINGS WITH EXTERNAL LOAD PLATES

716-99 FOR SITE MANAGER USE

SECTION 717 - CONCRETE PROTECTIVE COATINGS

717-01 FOR SITE MANAGER USE

717-02 WATERPROOFING MEMBRANES

717-03 PENETRATING TYPE PROTECTIVE SEALERS

717-04 COATING TYPE PROTECTIVE SEALERS

717-99 FOR SITE MANAGER USE

SECTION 718 - PRESTRESSED CONCRETE UNITS

718-01 PRESTRESSED CONCRETE UNITS (STRUCTURAL)

718-02 THRU 718-04 (VACANT)

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

718-05 PRESTRESSED CONCRETE FORM UNITS

718-06 HIGH PERFORMANCE CONCRETE FOR PRECAST AND PRESTRESSED

BRIDGE BEAMS

718-07 DIAPHRAGMS FOR PRESTRESSED CONCRETE BEAMS

718-08 THRU 718-29 (VACANT)

718-47 FOR SITE MANAGER USE

718-50 THRU 718-53 FOR SITE MANAGER USE

718-61 FOR SITE MANAGER USE

718-66 FOR SITE MANAGER USE

718-96 FOR SITE MANAGER USE

718-99 FOR SITE MANAGER USE

SECTION 719 - METAL COATINGS

719-01 GALVANIZED COATINGS AND REPAIR METHODS

719-02 ALUMINUM ANODIC COATINGS

719-03 ALUMINUM COATING (HOT DIP)

719-99 FOR SITE MANAGER USE

SECTION 720 - PILES

720-01 UNTREATED TIMBER PILES

720-02 TREATED TIMBER PILES

720-03 CASINGS FOR CAST-IN-PLACE CONCRETE PILES

720-04 STEEL H-PILES

720-05 PILE SHOES

720-06 MECHANICAL PILE SPLICES

720-99 FOR SITE MANAGER USE

SECTION 721 - CONCRETE ADHESIVES AND REPAIR MATERIALS

721-01 EPOXY RESIN SYSTEM

721-02 (VACANT)

721-03 EPOXY POLYSULFIDE GROUT

721-04 (VACANT)

721-05 EPOXY REPAIR PASTE

721-06 THRU 721-19 (VACANT)

721-20 RAPID HARDENING POLYMER CONCRETE

721-99 FOR SITE MANAGER USE

SECTION 722 - WATER SUPPLY

722-01 DUCTILE IRON WATER PIPE, FITTINGS AND ENCASEMENT

722-02 STEEL WATER PIPE AND FITTINGS

722-03 CONCRETE WATER PIPE

722-04 WATER VALVES AND HYDRANTS

722-05 PLASTIC WATER PIPE AND FITTINGS

722-06 WATER SERVICE PIPE, SERVICE VALVES AND FITTINGS

722-07 WEDGE TYPE MECHANICAL RESTRAINT GLANDS

722-08 INSULATION FOR WATER MAINS

722-99 FOR SITE MANAGER USE

SECTION 723 - LIGHTING

723-01 ALUMINUM LIGHT STANDARDS AND ARMS

723-02 HIGH MAST POLE, HEAD FRAME ASSEMBLY WITH LUMINAIRE RING AND

LOWERING DEVICE

723-03 PORTABLE POWER DRIVE FOR HIGH MAST LUMINAIRE LOWERING SYSTEM

723-04 THRU 723-09 (VACANT)

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

723-10 ANCHOR BASE (ALUMINUM)

723-11 THRU 723-14 (VACANT)

723-15 BREAKAWAY TRANSFORMER BASE (ALUMINUM)

723-16 THRU 723-18 (VACANT)

723-19 RIGID PLASTIC CONDUIT

723-20 METAL STEEL CONDUIT, ZINC COATED

723-21 AND 723-22 (VACANT)

723-23 P.V.C. COATED GALVANIZED STEEL CONDUIT

723-24 FLEXIBLE LIQUID-TIGHT STEEL CONDUIT

723-25 AND 723-26 (VACANT)

723-27 HIGH PRESSURE SODIUM VAPOR LUMINAIRES (STANDARD MOUNT)

723-28 LOW PRESSURE SODIUM VAPOR LUMINAIRES (UNDERDECK MOUNT) ... 1184

723-29 HIGH PRESSURE SODIUM VAPOR LUMINAIRES (UNDERBRIDGE MOUNT)

723-30 MERCURY VAPOR LUMINAIRES (STANDARD MOUNT)

723-31 MERCURY VAPOR LUMINAIRES (UNDERBRIDGE MOUNT)

723-32 THRU 723-39 (VACANT)

723-40 CAST-IRON JUNCTION BOX

723-41 THRU 723-44 (VACANT)

723-45 PRECAST REINFORCED CONCRETE FOUNDATIONS AND PULLBOXES ... 1187

723-46 THRU 723-49 (VACANT)

723-50 PHOTOELECTRIC CONTROL

723-51 THRU 723-59 (VACANT)

723-60 ANCHOR BOLTS

723-61 THRU 723-69 (VACANT)

723-70 SINGLE CONDUCTOR CABLE

723-71 SINGLE CONDUCTOR DIRECT BURIAL CABLE

723-72 THRU 723-74 (VACANT)

723-75 GROUND WIRE

723-99 FOR SITE MANAGER USE

SECTION 724 - TRAFFIC SIGNALS

724-01 SIGNAL CABLE

724-02 SPAN WIRE

724-03 TRAFFIC SIGNAL POLES

724-04 TRAFFIC SIGNAL HEADS

724-05 THRU 724-07 (VACANT)

724-08 SHIELDED COMMUNICATION CABLE

724-09 SIGNAL CABLE WITH INTEGRAL MESSENGER

724-10 SHIELDED COMMUNICATION CABLE WITH INTEGRAL MESSENGER

724-11 THRU 724-14 (VACANT)

724-15 FIRE PRE-EMPTION TELL-TALE LIGHT

724-16 THRU 724-19 (VACANT)

724-20 INDUCTANCE LOOP WIRE

724-21 SHIELDED LEAD-IN CABLE

724-22 ROADWAY LOOP EMBEDDING SEALER

724-23 PEDESTRIAN PUSH BUTTON AND SIGN

724-99 FOR SITE MANAGER USE

SECTION 725 - MISCELLANEOUS METALS AND PLASTICS

725-01 COPPER FLASHING

725-02 STEPS FOR MANHOLES

725-99 FOR SITE MANAGER USE

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

SECTION 726 - DETECTABLE WARNING UNITS

726-01 SURFACE-APPLIED DETECTABLE WARNING UNITS

726-02 EMBEDDED DETECTABLE WARNING UNITS

SECTION 727 - PAVEMENT MARKING MATERIALS

727-01 EXTRUDED THERMOPLASTIC

727-02 REMOVABLE RAISED PAVEMENT MARKERS

727-03 EPOXY PAINT

727-04 PERMANENT PAVEMENT TAPE

727-05 GLASS BEADS FOR PAVEMENT MARKINGS

727-06 REMOVABLE PAVEMENT TAPE

727-07 REMOVABLE WET-NIGHT REFLECTIVE TAPE

727-08 PERMANENT WET-NIGHT REFLECTIVE TAPE

727-09 TRAFFIC PAINT

727-99 FOR SITE MANAGER USE

SECTION 728 - COMPRESSIVE LOAD TRANSMITTING DEVICES

728-01 RUBBER IMPREGNATED WOVEN COTTON-POLYESTER FABRIC

728-02 RUBBER IMPREGNATED RANDOM FIBER PAD

728-03 PLAIN RUBBER PAD

728-04 SHEET LEAD

728-05 (VACANT)

728-06 SHEET GASKET (TREATED BOTH SIDES)

728-99 FOR SITE MANAGER USE

SECTION 729 - TEMPORARY TRAFFIC CONTROL DEVICES

729-01 DRUMS

729-02 CONES

729-03 TEMPORARY TUBULAR MARKERS

729-04 VERTICAL PANELS

729-05 STOP/SLOW PADDLES

729-06 TYPE I CONSTRUCTION BARRICADES

729-07 TYPE II CONSTRUCTION BARRICADES

729-08 TYPE III CONSTRUCTION BARRICADES

729-09 TEMPORARY SIGN SUPPORTS

729-10 TEMPORARY IMPACT ATTENUATORS - REDIRECTIVE

729-11 TEMPORARY IMPACT ATTENUATORS - GATING

729-12 TRUCK-MOUNTED AND TRAILER MOUNTED IMPACT ATTENUATORS

729-13 TEMPORARY SAND BARRELS

729-14 VEHICLE-ARRESTING SYSTEMS

729-15 ARROW PANELS

729-17 TEMPORARY GLARE SCREENS

729-18 WARNING LIGHTS

729-19 AUTOMATED FLAGGER ASSISTANCE DEVICES

729-20 PORTABLE TRAFFIC SIGNALS

729-21 TEMPORARY OVERLAY MARKERS

729-22 TRUCK MOUNTED VARIABLE-MESSAGE SIGNS (TMVMS)

SECTION 730 - SIGNS AND DELINEATORS

730-01 ALUMINUM SIGN PANELS

730-02 TEMPORARY PLYWOOD SIGN PANELS

730-03 TEMPORARY RIGID LIGHTWEIGHT SIGN PANELS

730-04 (VACANT)

730-05 REFLECTIVE SHEETING

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

730-06 THRU 730-08 (VACANT)

730-09 FOR SITE MANAGER USE

730-10 ACRYLIC PLASTIC REFLEX REFLECTORS

730-11 FOR SITE MANAGER USE

730-12 REFLECTORIZED SHEETING SIGN CHARACTERS (TYPE IV)

730-13 REFLECTORIZED SHEETING SIGN CHARACTERS (TYPE V)

730-14 FOR SITE MANAGER USE

730-15 THRU 730-18 (VACANT)

730-19 TEMPORARY WOODEN SIGN POSTS

730-20 DELINEATOR, REFERENCE MARKER AND SNOWPLOWING MARKER POSTS

730-21 FLEXIBLE DELINEATOR POSTS

730-22 STIFFENERS, OVERHEAD BRACKETS AND MISCELLANEOUS HARDWARE

730-23 FIBERGLASS REINFORCED PLASTIC SIGN PANELS

730-24 TYPE A SIGN SUPPORTS

730-25 TYPE B SIGN POSTS

730-26 BREAKAWAY BASES AND HINGE ASSEMBLIES

730-27 PERMANENT VARIABLE MESSAGE SIGNS

730-99 FOR SITE MANAGER USE

SECTION 731 - SUBSURFACE TENSILE ELEMENTS

731-01 SOIL NAIL TENDON ASSEMBLY

731-02 GROUTED TIEBACK ASSEMBLY

731-03 ROCK BOLT ASSEMBLY

731-15 FOR SITE MANAGER USE

SECTION 732 - DRILLING

732-01 DRILL RIGS

732-02 DRIVE PIPE

732-03 CASING

732-04 SAMPLERS

732-05 THIN WALL SAMPLE TUBES

732-06 CORING BITS

732-07 SAMPLE STORAGE BAGS

732-08 SAMPLE JARS

732-09 JAR CARTONS

732-10 BOULDER AND ROCK CORE BOXES

732-11 OPEN WELL PIEZOMETER

732-12 GROUT

732-13 FOR SITE MANAGER USE

732-99 FOR SITE MANAGER USE

SECTION 733 - EARTHWORK MATERIALS

733-01 FLOWABLE FILL

733-02 MECHANICALLY STABILIZED EARTH SYSTEM BACKFILL MATERIAL

733-03 GEOSYNTHETICALLY REINFORCED SOIL SYSTEM SLOPE BACKFILL

MATERIAL

733-04 SUBBASE COURSE

733-05 GLASS BACKFILL

733-06 RECLAIMED ASPHALT PAVEMENT FOR EARTHWORK AND SUBBASE

733-07 RECYCLED PORTLAND CEMENT CONCRETE AGGREGATE

733-08 EMBANKMENT IN PLACE

NEW YORK STATE DEPARTMENT OF TRANSPORTATION

STANDARD SPECIFICATIONS (USC) January 1, 2019

733-09 SELECT BORROW

733-10 SELECT FILL

733-11 SELECT GRANULAR FILL

733-12 SELECT GRANULAR FILL SLOPE PROTECTION

733-13 SELECT GRANULAR SUBGRADE

733-14 SELECT STRUCTURE FILL

733-15 SAND BACKFILL

733-16 WINTER EARTHWORK

733-17 SURFACE SETTLEMENT GAUGE

733-18 SETTLEMENT ROD

733-19 RECYCLED MATERIALS APPROVED FOR USE AS EARTHWORK MATERIAL

733-20 UNDERDRAIN FILTER MATERIAL

733-21 STONE FILLING

733-22 RIP-RAP

733-23 BEDDING MATERIAL

SECTION 734 - CONCRETE SLAB OVERLAYS

734-01 THIN POLYMER (EPOXY) OVERLAY WEARING SURFACE FOR STRUCTURAL

SLABS

SECTION 735 - CONCRETE CYLINDER CURING BOX

735-01 CONCRETE CYLINDER CURING BOX

SECTION 736 - PERMANENT CORRUGATED METAL FORMS FOR BRIDGE

SLABS

736-01 PERMANENT CORRUGATED METAL FORMS FOR BRIDGE SLABS

SECTION 737 - GEOSYNTHETICS

737-01 GEOTEXTILES

737-02 GEOMEMBRANES

737-03 PREFABRICATED VERTICAL DRAINS

737-04 PREFABRICATED COMPOSITE STRUCTURAL DRAINS

737-05 PREFABRICATED COMPOSITE INTEGRAL ABUTMENT DRAINS

737-06 PREFABRICATED COMPOSITE EDGE DRAINS

737-07 GEOGRIDS

737-08 GEOCELLS

737-09 GEOSYNTHETIC FIBERS

SECTIONS 738 THRU 739 (VACANT)

SECTION 740 – FOR SITE MANAGER USE

740-01 THRU 740-04 FOR SITE MANAGER USE

SECTION 741 – FOR SITE MANAGER USE

741-01 THRU 740-04 FOR SITE MANAGER USE

SECTIONS 742 THRU 794 (VACANT)

SECTION 795 – FOR SITE MANAGER USE

SECTIONS 796 THRU 799 (VACANT)

Section 100

GENERAL PROVISIONS

SECTION 101 - ABBREVIATIONS AND DEFINITIONS OF TERMS

(Last Revised January, 2019)

Wherever in these specifications or in other contract documents the following terms or pronouns in place of them are used, the intent and meaning shall be interpreted as follows:

101-01 ABBREVIATIONS OF TERMS. Wherever the following abbreviations are used in these specifications or on the plans, they are to be construed the same as the respective expressions represented.

Some of these abbreviations may be acronyms and some may appear with periods.

AASHTO - American Association of State Highway and Transportation Officials AISI - American Iron and Steel Institute ANSI - American National Standards Institute, Inc AREA - American Railway Engineering and Maintenance-of-Way Association ASME - American Society of Mechanical Engineers ASTM - American Society for Testing and Materials AWPA - American Wood-Preservers Association AWWA - American Water Works Association CADD - Computer Aided Design and Drafting CPM - Critical Path Method CFR - Code of Federal Regulations CRU - Contract Review Unit DCEC - Deputy Chief Engineer for Construction DCED - Deputy Chief Engineer for Design DCES - Deputy Chief Engineer for Structures Design and Construction DCETS - Deputy Chief Engineer for Technical Services EPA - U.S. Environmental Protection Agency FHWA - Federal Highway Administration HMA - Hot Mix Asphalt MASH - Manual for Assessing Safety Hardware MM - Materials Method MP - Materials Procedure MURK - Manual for Uniform Record Keeping MUTCD - Manual of Uniform Traffic Control Devices NEC - National Electric Code NEMA - National Electrical Manufacturers Association NYCRR - Official Compilation of Codes, Rules and Regulations of the State of New York NYSDEC - New York State Department of Conservation NYSDOL - New York State Department of Labor NYSTA - New York State Thruway Authority OSHA - Occupational Safety and Health Administration, US Department of Labor PCC - Portland Cement Concrete PCCM - New York State Prestressed Concrete Construction Manual PCCP - Painting Contractor Certification Program RME - Regional Materials Engineer

STANDARD SPECIFICATIONS (USC) January 1, 2019

SCM - New York State Steel Construction Manual SDS - Safety Data Sheet SSPC - Steel Structures Painting Council USACE - U.S. Army Corps of Engineers USC - United States Code USCG - United States Coast Guard UL - Underwriters' Laboratories VECP - Value Engineering Change Proposal WMA - Warm Mix Asphalt

STANDARD SPECIFICATIONS (USC) January 1, 2019

101-02 DEFINITIONS OF TERMS.

Wherever the following terms are used in these specifications or on the plans, they are to be construed the same as the respective definitions represented.

A+B Bidding. A time-related form of bidding used by the Department for contracts that are time sensitive, either in overall contract duration, or the duration of a task or tasks. The total contract bid price consists of the amount bid that will be paid for the work (the “A portion”), plus the number of days for completion of the specified work multiplied by the user cost specified in the contract documents, (the “B portion”).

Addenda. Separate publication(s) containing supplemental additions, deletions, and modifications to the provisions of the Standard Specifications which are in effect on the date of advertisement for receipt of bids.

Advertisement. The public announcement, as required by law, inviting bids for work to be performed or materials to be furnished.

Amendment. A formal alteration by addition, deletion or modification of a proposed contract, issued prior to the opening of bids.

Approved List. List of materials, equipment, Manufacturers, Fabricators or Material Suppliers approved by the Materials Bureau under a particular specification. The Approved Lists are published periodically and are available from the Materials Bureau or on the Department web site.

Award. The decision of the Department to accept the proposal of the lowest responsible bidder for the work, subject to the execution and approval of a satisfactory contract therefore and bond to secure the performance thereof and to such other conditions as may be specified or otherwise required by law.

Base Line Data. The relevant contract specific information and engineering data used to develop the contract plans and proposal. The relevant information and data will be listed as available on Form CONR-9 Supplemental Information Available to Bidders included in the contract proposal.

Bid Deposit. The security furnished by the bidder with their proposal for a contract, as guarantee the bidder will enter into a contract for the work if their proposal is accepted.

Bidder. An individual, firm or corporation formally submitting a proposal for the work contemplated acting directly or through a duly authorized representative.

Bridge. The term “bridge” shall apply to any structure whether single or multiple span construction with a clear span in excess of 20 feet when measurement is made horizontally along the center line of roadway from face to face of abutments or sidewalls immediately below the copin