CSTA PWS TECHNICAL EXHIBIT A Perf Rqmnts Summary.pdf

TECHNICAL EXHIBIT A

Performance Requirements Summary (PRS)

PERFORMANCE

OBJECTIVE (PO)

STANDARD

(Evaluation standards based on results of training phases in PO)

PERFORMANCE

THRESHOLD

ACCEPTABLE

QUALITY

LEVELS (AQLs)

METHOD OF

SURVEILLANCE

PRS#1 - PWS para (5.2 & 5.2.1) The contractor shall assist military and government service personnel in the design, planning, coordination, synchronization, preparation, and execution of the

WMD CST

training/exercise event.

a) Standard:

Contractor shall train and evaluate CSTs IAW the T&EOs in Exhibit C.

b) Standard: Unit demonstrates proficiency IAW current T&EO.

c) Standard: Oral and written feedback daily after performance during Hot-wash, Informal AAR, during Out-briefs at the conclusion of training, and through input to formal training evaluation reports.

a) 100% Compliance Zero Deviation from standard.

b) 80% of units demonstrate task proficiency during evaluations with a (T).

c) 100% Compliance

Periodic Inspection

PRS#2 - PWS para (5.2 & 5.2.2)

The contractor shall assist military and government service personnel in the design, planning, coordination, synchronization, preparation, and

a) Standard:

Contractor shall train and evaluate HRFs & CERPs IAW the T&EOs in Exhibit C.

b) Standard: Unit demonstrates proficiency IAW current T&EO.

a) 100% Compliance

b) 60% of units proficiency during evaluations with a execution of the

HRF/CERFP

training/exercise event.

feedback daily assessing unit performance (Hot-wash, Informal AAR, Out- brief).

(T) minus) or better.

c) 90% accuracy with identifying unit strengths and weaknesses

PRS#3 - PWS para (5.2 & 5.2.3-5.2.5)

The contractor shall assist military and government service personnel in the design, planning, coordination, synchronization, preparation, and execution of the

DCRF & C2CRE TSF

MCD & RECON

training/exercise event.

a) Standard:

Contractor shall provide training and evaluation of DCRF

& C2CRE TSF

MCD/RECON

events IAW the

MCD & RECON

T&EOs in Exhibit C.

b) Standard: Unit demonstrates feedback daily assessing unit performance (Hot-wash, Informal AAR, Out- brief).

a) 100% Compliance

b) 60% of units proficiency during evaluations with a

(T) minus) or better.

c) 90% accuracy with identifying unit strengths and

PRS#4 - PWS para (5.2 & 5.2.6.)

The contractor shall assist military and government service personnel in the design, planning, coordination,

a) Standard:

Contractor shall provide training and evaluation of US&R events IAW the US&R T&EOs in Exhibit C.

a) 100% synchronization, preparation, and execution of the

US&R

training/exercise events.

b) Standard: Unit demonstrates feedback daily assessing unit performance (Hot-wash, Informal AAR, Out- brief).

d) The contractor shall have a minimum of one (1) search & rescue

SUBJECT MATTER

EXPERTISE for every six (6) Soldiers involved in the US&R training

IAW FEMA

standards.

b) 60% of units demonstrate task proficiency during evaluations with a

(T) minus) or better.

c) 90% accuracy with identifying unit strengths and

d) 100%

100% Inspection

PRS#5 - PWS para (5.2 & 5.2.9.1.)

Contractor shall perform roles and responsibilities as an Incident Management Team in support of MCD, R&S, US&R, and CST training and evaluations, when requested.

Role players range from one (1) to three

(3) depending on the level of the exercise.

a) Standard:

Develops an Incident Action Plan (IAP) and map of area of operation.

b) Standard: Issues guidance and direction for supporting units to accomplish assignments.

c) Standard:

Documentation is accurate and complete.

d) Standard: The contractor shall a-c) 98% accuracy with IAP products;

d) 90% accuracy with ICS command a-c) Periodic Inspection have operational knowledge and use of the ICS, knowledge of 29

CFR 1910.120

paragraph Q and other current OSHA standards for industry. The contractor role plays various positions that are key for the military to interface with as if they were supporting first responders on an actual incident. The foundation and doctrine for this is established under the FEMA ICS curriculum and the National Incident Management System (NIMS).

e) Standard:

Ensures props for collapsed structures, trench operations, vehicle extraction, machinery extraction, confined space and rope rescue are safe to operate in.

post setup

W/FEMA ICS

curriculum and

NIMS.

e) 100% accuracy with urban search and rescue operational props

PRS #6 - Service Contract Reporting

(SCR)

PWS 5.3 and CLIN

XXXX

The Contractor shall completely fill in all the information in the format using the following web address www.sam.gov The contractor shall provide the estimated total cost

Zero Deviation from Standard

100% Inspection http://www.sam.gov/

(if any) incurred to comply with this reporting requirement.

Reporting period shall be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by 31 October of each calendar year. If contract period of performance ends prior to September 30, the contractor has 30 days from end date of the contract to complete the SCR requirement.