Attachment_0025_HMMR_Template_Rev001.xlsx

XLSX spreadsheet 31 KB Posted

Attached to
Optionally Manned Fighting Vehicle (OMFV) Request for Proposal (RFP) W56HZV-22-R-0026
Solicitation number
W56HZV-22-R-0026
Issued by

About this file

This document contains a hazardous materials management report template and information related to an Army solicitation for the Optionally Manned Fighting Vehicle program. The template requires offerors to provide details on hazardous materials used, stored, disposed of or created during production, operation, maintenance or sustainment of proposed vehicle systems. Materials include adhesives, sealants, cleaners, greases, paints, oils, batteries and others. For each item, offerors must specify the product and vendor, intended use phase, quantities, safety data sheets, special handling and training requirements, and disposal methods. The related solicitation seeks proposals for Phase 3 and 4 of the OMFV program, including detailed design, prototype build and testing. Instructions are provided for requesting controlled or classified information attachments. Offerors are required to have the appropriate facility clearances and agreements to receive different categories of controlled data.

View the file

Other files

File Type Posted
Distro A - OMFV RFP W56HZV-22-R-0026 QA 01-140.pdf PDF
Distro A - OMFV RFP W56HZV-22-R-0026 QA 01-139.pdf PDF
Distro A - OMFV RFP W56HZV-22-R-0026 QA 01-124.pdf PDF
Attachment_0091_Digital_System_Model_Rev004.docx DOCX document
W56HZV-22-R-0026_0004.pdf PDF
W56HZV-22-R-0026_Conformed_26SEP2022.pdf PDF
Attachment_0075_OMFV_Program_Schedule_Rev003 (Distro A) (30 Aug 2022).docx DOCX document
Attachment_0055_Vehicle_Vulnerability_Data_Instructions (Distro A) (29 Mar 2022).docx DOCX document
W56HZV-22-R-0026_Conformed_16SEP2022.pdf PDF
W56HZV-22-R-0026_0003.pdf PDF
Distro A - OMFV RFP W56HZV-22-R-0026 QA 01-109.pdf PDF
Distro A - OMFV RFP W56HZV-22-R-0026 QA 01-95.pdf PDF
W56HZV-22-R-0026_Conformed_24AUG2022.pdf PDF
Distro A - OMFV RFP W56HZV-22-R-0026 QA 01-68.pdf PDF
Attachment_0091_Digital_System_Model_Rev003.docx DOCX document
W56HZV-22-R-0026_0002.pdf PDF
Attachment_0034_Critical_Task_List_Rev001.pdf PDF
Distro A - OMFV RFP W56HZV-22-R-0026 QA 01-52.pdf PDF
Attachment_0091_Digital_System_Model_Rev002.docx DOCX document
OMFV RFP W56HZV-22-R-0026_0001.pdf PDF
W56HZV-22-R-0026_Conformed_5AUG2022.pdf PDF
OMFV RFP W56HZV-22-R-0026 Questions and Answers (7 July 22).pdf PDF
Attachment_0057_Active_Protection_Data Rev001.xlsx XLSX spreadsheet
Attachment_0064_Process_Simulate_Rev001.docx DOCX document
Attachment_0061_Tracked_Vehicle_Dynamics_Datasheet_Rev001.xlsx XLSX spreadsheet
Attachment_0088_OMFV_Bill_of_Materials_(BOM) Rev001.xlsx XLSX spreadsheet
Attachment_0091_Digital_System_Model_Rev001.docx DOCX document
Attachment_0042_ATPD_2232.pdf PDF
Attachment_0083 Logistics Schedule Rev001.xlsx XLSX spreadsheet
Attachment_0072 DD254 (Rev002).pdf PDF
Attachment_0011_Developmental_Level_TDP_Instructions_Rev001.docx.pdf PDF
Attachment_0045_PPMx_Characteristics_Rev001.xlsx XLSX spreadsheet
Attachment_0089_Attribute Selection Worksheet.pdf PDF
Attachment_0017_Request_for_Use_of_Prohibited_Material.docx DOCX document
Attachment_0019_Small_Business_Participation_Factor_Workbook_Instructions.docx DOCX document
Attachment_0024_RMF_Package_Deliverables_Rev002.docx DOCX document
W56HZV-22-R-0026.pdf PDF
Attachment_0099_Data_Architecture_Artifacts_OTD.docx DOCX document
Attachment_0012_Technical_Data_and_Assertions_Rev001.xlsx XLSX spreadsheet
Attachment_0060_Vehicle_Data_Package_for_Propulsion_System_Rev001.xlsx XLSX spreadsheet
Attachment_0033_PTM_Crosswalk_Template_Rev001.xlsx XLSX spreadsheet
Attachment_0100_ATTLA_Universal_Data_Sheet_Rev001.xlsx XLSX spreadsheet
Attachment_0043_After_Action_Report_Sample.docx DOCX document
Attachment_0016_Small_Business_Participation_Factor_Workbook_Rev001.xlsx XLSX spreadsheet
Attachment_0075_OMFV_Program_Schedule_Rev002.docx.docx DOCX document
Attachment_0048_IUID_Sample_Data_Plate.docx DOCX document
Attachment_0013_Special_License_Requirements.docx DOCX document
Attachment_0047_Advanced_Manufacturing_Candidate_Parts_List_Rev001.xlsx XLSX spreadsheet
Attachment_0090_CoSite_Data_Instructions.docx DOCX document
Attachment_0058_AFES_Analysis_Information_Request.docx DOCX document
Show 40 more

Latest 50 of 59 listed here. See the rest on GovTribe.

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Cover Page

Attachment 0025
Hazardous Materials Management Report Template
Solicitation No.: W56HZV-22-R-0026
28-Jun-2022
Revision No.: 001

All data in this workbook is subject to the distribution statement found on "USG Attachment Coversheet"

Distribution Statement A: Approved for public release; distribution is unlimited.

Responses

SECURITY NOTICE: Contractor responses to the data requirements are likely to be at the Controlled Unclassified Information (CUI) level, and may be at the SECRET level. For security related guidance and procedures on how to mark, handle, and transmit classified information, contractors should refer to the NISPOM Rule, supporting DD 254, and the OMFV Security Classification Guide (CUI) signed by PEO GCS on 18 February 2021.

All CUI responses should be marked with the following CUI Designation Indicator and Distribution Statement:

Controlled by: the name of the Offeror company (not required if identified in the letterhead) Controlled by: identification of the office creating the document CUI Category(ies): CTI, EXPT Distribution Statement: D POC: name and phone number or email of POC

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and U.S. DoD contractors; Specific Authority: DoDM 5200.01 and DoDM 5200.45, date of determination is: 18 February 2021. Other requests for this document shall be referred to the attention of the PM Maneuver Combat Systems (MCS) Security Manager at: Program Executive Office Ground Combat Systems (PEO GCS), ATTN: SFAE-GCS-C, 6501 East Eleven Mile Road, Detroit Arsenal, MI 48397-5000.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed -- in whole or in part -- for any purpose other than to evaluate this proposal. If, however, a contract is awarded to this offeror as a result of -- or in connection with -- the submission of this data, the Government shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the Government's right to use information contained in this data if it is obtained from another source without restriction.

Source Selection Information -- See FAR 2.101 and 3.104.

SECRET responses should use the following Instructions:

This content is classified at the SECRET level and may contain elements of controlled unclassified information (CUI), unclassified, or information classified at a lower level than the overall classification displayed. This content shall not be used as a source of derivative classification; refer instead to OMFV Security Classification Guide, 20210218. It must be reviewed for both Classified National Security Information (CNSI) and CUI in accordance with DoDI5230.09 prior to public release, or PM Maneuver Combat Systems (MCS) Security Manager at: Program Executive Office Ground Combat Systems (PEO GCS), ATTN: SFAE-GCS-C, 6501 East Eleven Mile Road, Detroit Arsenal, MI 48397-5000.

Classified by: List name, position title of the Derivative classifier and office of origin Derived from: OMFV SCG, 20210218 Declassify on: YYYYMMDD (Refer to declassification column to determine the date)

Controlled by: the name of the Offeror company (not required if identified in the letterhead) Controlled by: identification of the office creating the document CUI Category(ies): CTI, EXPT Distribution Statement: D POC: name and phone number or email of POC

Revision Log

CUI
All data on this worksheet is subject to the contractor's disclosure statement(s) found on the "Cover Page"
Revision #DateChange Description
0016/28/22Admin change to move the CUI response language on the "Cover Page" tab to its own "Responses" tab.
(add additional rows as necessary)
CUI

HazMat

Item #Product TypePart/Process DescriptionVendor / Vendor Product NameVendor Part NumberNational Stock Number (NSN)Corresponding Specifications and StandardsLifecycle PhaseWhere Used / ProcessesQuantities or VolumesEmbedded on System (Y or N)Created by System (Y or N)Anticipated Hazardous WasteSDSSpecial Hazardous Materials TrainingHandling, Storage and Disposal RequirementsAlternatives / Trade OffsRequests for Use of Prohibited Materials
NOTES:Adhesives, Sealants, Cleaners, Greases, Hydraulic Fluid, Paints, Coatings, Oils, Coolant, Fuel, Solvents, Refrigerants, Fire Suppressants, Batteries, etc.Military or commercial specification associated with the productProduction, Operation, Maintenance and/or SustainmentWhere used on system or what process in production (include part numbers for embedded hazmat)Provide number of parts impacted or volume of fluidEmbedded examples include cadmium plating on an electrical connector, lead solder on electronics, hex chrome in coating. Something that remains on the system in its hazardous form.Created by examples include engine emissions and concentrated brines created by water purification systems.Identify reasonably anticipated hazardous wastes generated during normal O&M and emergency situationsA SDS must be provided for each hazardous material. Embed file or provide numbering system that coordinates with separately-provided SDSs.Describe special training required. For example, refrigerant requires training and license.Materials triggering requirements include but are not limited to paint waste, used fluids, batteries, refrigerant, cadmium or hex chrome parts and compressed gases. Includes safety precautions or PPE required for safe handling.
If CARC is included, PPE would be required for any cutting, grinding, sanding, welding, etc. of any painted surfaces to prevent exposure to hex chrome.If OEM plans to request approval for prohibited materials, this column must include alternative materials investigatedEmbed or reference any Requests for Use of Prohibited Materials submitted for this hazardous material. Requests for Use of Prohibited Materials must include trade-off analyses for alternative materials considered.
EXAMPLEAdhesiveAdhesive, LOCTITE 242LOCTITE 242 Threadlocker---8030-XX-XXX-XXXX---ProductionUsed on hood assemblyAs requiredNNEmpty TubeSDS-01--1) Do not breathe vapors or spray mist. Avoid exceeding the given occupational exposure limits

2) Do not get in eyes, on skin, or on clothing.

3) Disposal should be in accordance with applicable regional, national and local laws and regulations.No--
EXAMPLELubricating OilLubricating Oil, SAE 15W-40Lubrizol 15W40 CC Engine Oil---9150-XX-XXX-XXXXMIL-PRF-2104Production, Operation and SustainmentUsed in engine10 LNNPotentially contaminated used oil.SDS-02--1) Wear safety glasses with side shields (or goggles).

2) Wear protective nitrile or Neoprene gloves.

3) Disposal should be in accordance with applicable regional, national and local laws and regulations.No--
EXAMPLEHardwareCadmium platingCadmium---------Production and SustainmentCadmium plating is used as a metallic coating on cable and wire harness connectors that mate to GFE. (Provide every part number that contains cadmium).50 connectorsYNUsed wiring and electrical connectorsSDS-03--1) Parts may be considered hazardous waste.

2) Disposal should be in accordance with applicable regional, national and local laws and regulations.

3) Do not cut, grind or torch cadmium connectors.Alternatives evaluated include zinc-nickel and nickel-Teflon.--
EXAMPLEBatteryLead acid batteryHawker 6T battery234871234-XX-XXX-XXXXMIL-PRF-XXXProduction, Operation, Maintenance and SustainmentMain vehicle battery2 batteriesYNUsed batteriesSDS-04--1) Disposal should be in accordance with applicable regional, national, and local laws and regulations.No--

****Remember to include hazardous materials embedded on the system, produced by the system, or used or created by the operation or maintenance of the system*** image1.png

File details come from the government source that posted it. Updated .