Attachment_0057_Active_Protection_Data Rev001.xlsx

Cover

Distribution Statement A: Approved for public release; distribution is unlimited.

Solicitation No.: W56HZV-22-R-0026 Attachment 0057

Attachment 0057

Responses

SECURITY NOTICE: Contractor responses to the data requirements are likely to be at the Controlled Unclassified Information (CUI) level, and may be at the SECRET level. For security related guidance and procedures on how to mark, handle, and transmit classified information, contractors should refer to the NISPOM Rule, supporting DD 254, and the OMFV Security Classification Guide (CUI) signed by PEO GCS on 18 February 2021.

All CUI responses should be marked with the following CUI Designation Indicator and Distribution Statement:

Controlled by: the name of the Offeror company (not required if identified in the letterhead) Controlled by: identification of the office creating the document CUI Category: CTI, EXPT Distribution Statement: D POC: name and phone number or email of POC

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and U.S. DoD contractors; Specific Authority: DoDM 5200.01 and DoDM 5200.45, date of determination is: 18 February 2021. Other requests for this document shall be referred to the attention of the PM Maneuver Combat Systems (MCS) Security Manager at: Program Executive Office Ground Combat Systems (PEO GCS), ATTN: SFAE-GCS-C, 6501 East Eleven Mile Road, Detroit Arsenal, MI 48397-5000.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

SECRET responses should use the following Instructions:

This content is classified at the SECRET level and may contain elements of controlled unclassified information (CUI), unclassified, or information classified at a lower level than the overall classification displayed. This content shall not be used as a source of derivative classification; refer instead to OMFV Security Classification Guide, dated 18 February 2021. It must be reviewed for both Classified National Security Information (CNSI) and CUI in accordance with DoDI5230.09 prior to public release, or PM Maneuver Combat Systems (MCS) Security Manager at: Program Executive Office Ground Combat Systems (PEO GCS), ATTN: SFAE-GCS-C, 6501 East Eleven Mile Road, Detroit Arsenal, MI 48397-5000.

Classified by: List name, position title of the Derivative classifier and office of origin Derived from: OMFV SCG, 20210218 Declassify on: YYYYMMDD (Refer to declassification column to determine the date)

Controlled by: the name of the Offeror company (not required if identified in the letterhead) Controlled by: identification of the office creating the document CUI Category: CTI, EXPT Distribution Statement: D POC: name and phone number or email of POC

Attachment 0057

Attachment 0057

Change Log

All data on this worksheet is subject to the contractor's disclosure statement(s) found on the "Contractor Coversheet"

b. Admin change to move the CUI response language on the "Cover Page" tab to its own "Responses" tab.

(add additional rows as necessary)

Solicitation No.: W56HZV-22-R-01026 Attachment 0057

Attachment 0057

Instructions For each Category in column B in the "APS Data" tab, provide the data requested in column C, Description. For each Category, column D, "Ideal Condition" describes the content of the preferred data set. Column E, "Minimum Requested", describes the minimum data required to satisfy the data requirement.

UNCLASSIFIED

UNCLASSIFIED

APS Data

* Identification/description of zones/areas of obstruction around the vehicle that impede the sensor fields-of-view and effector fields-of-regard

* POC for clarifications on CAD data 2 Passive Sensor Information Data that describes operation of any passive sensors in the included APS system (Passive sensors are defined as sensors that do not radiate in the electromagnetic spectrum for signature detection) Provide specifications per sensor face and for the system as a whole, as installed on the vehicle:

- Vertical and Horizontal FoV

- Maximum range of detection per threat

- Probability of detection at maximum range per threat

- Probability of declaration at maximum range per threat

- Probability of classification at maximum range per threat

- Time to detect at range extents [min,max] per threat (include computation/processing time)

- Time to declare at range extents [min, max] per threat (include computation/processing time)

- Time to classify at range extents [min, max] per threat (include computation/processing time)

- Operational wavelengths [min, max]. If multiple bands, provide wavelength extents for each band

- False alarm rate (if feasible, provide a separate false alarm rate for detect, declare, and classify actions)

- Angle of arrival accuracy

- Declaration of multiple threats (minimum spatial/angular separation, minimum temporal separation)

- Error ranges associated with all numerical values

- Steady state power consumption

- Peak power consumption Provide specifications per sensor face and for the system as a whole, as installed on the vehicle:

- Vertical and Horizontal FoV

- Maximum range of detection per threat

- Probability of detection at maximum range per threat

- Probability of declaration at maximum range per threat

- Probability of classification at maximum range per threat

- Time to detect at range extents [min,max] per threat (include computation/processing time)

- Time to declare at range extents [min, max] per threat (include computation/processing time)

- Time to classify at range extents [min, max] per threat (include computation/processing time)

- False alarm rate (if feasible, provide a separate false alarm rate for detect, declare, and classify actions)

- Angle of arrival accuracy

- Error ranges associated with all numerical values

- Declaration of multiple threats (minimum spatial/angular separation, minimum temporal separation)

3 Active Sensor Information Data that describes operation of any actively emitting sensors in the included APS system (Active sensors are defined as sensors that do radiate in the electromagnetic spectrum for signature detection) Provide specifications per sensor face and for the system as a whole, as installed on the vehicle:

- Vertical and Horizontal FoV

- Maximum range of detection per threat

- Probability of detection at maximum range per threat

- Probability of declaration at maximum range per threat

- Probability of classification at maximum range per threat

- Time to detect at range extents [min,max] per threat (include computation/processing time)

- Time to declare at range extents [min, max] per threat (include computation/processing time)

- Time to classify at range extents [min, max] per threat (include computation/processing time)

- Track update rate in Hz

- Operational wavelengths [min, max]. If multiple bands, provide wavelength extents for each band

- Error ranges associated with all numerical values

- False alarm rate (if feasible, provide a separate false alarm rate for detect, declare, and classify actions)

- Declaration of multiple threats (minimum spatial/angular separation, minimum temporal separation)

- Steady state power consumption

- Peak power consumption

- Peak power of emmission

- Duration of peak emmission Provide specifications per sensor face and for the system as a whole, as installed on the vehicle:

- Vertical and Horizontal FoV

- Maximum range of detection per threat

- Probability of detection at maximum range per threat

- Probability of declaration at maximum range per threat

- Probability of classification at maximum range per threat

- Time to detect at range extents [min,max] per threat (include computation/processing time)

- Time to declare at range extents [min, max] per threat (include computation/processing time)

- Time to classify at range extents [min, max] per threat (include computation/processing time)

- Track update rate in Hz

- False alarm rate (if feasible, provide a separate false alarm rate for detect, declare, and classify actions)

- Error ranges associated with all numerical values

- Declaration of multiple threats (minimum spatial/angular separation, minimum temporal separation)

4 Fire Control Processing Data that describes operation of fire control processing elements within the APS system Provide specifications for the fire control processing components:

- Time to compute initial fire control solution (FCS) (deltaT from initial sensor declaration to include computation/processing time)

- Time to converge FCS (deltaT from initial sensor declaration to include computation/processing time)

- Time to receive platform specific data (e.g. INS data, turret orientation data, meteorological data, etc...)

- Accuracy, resolution, rate, and precision of platform specific data (e.g. INS data, turret orientation data, meteorological data, etc...)

- Error ranges associated with all numerical values Provide specifications for the fire control processing components:

- Time to compute initial fire control solution (FCS) (deltaT from initial sensor declaration to include computation/processing time)

- Time to converge FCS (deltaT from initial sensor declaration to include computation/processing time)

- Time to receive platform specific data (e.g. INS data, turret orientation data, meteorological data, etc...)

- Accuracy, resolution, rate, and precision of platform specific data (e.g. INS data, turret orientation data, meteorological data, etc...)

- Error ranges associated with all numerical values 5 Hard-Kill (HK) Launcher Information Data that describes the operation of HK APS launchers/countermeasures Provide specifications for the launcher/countermeasure components as installed on the vehicle:

- Vertical and Horizontal Field of Regard

- For gimballed launchers: Time to slew to target from max angular offset

- For gimballed launchers: Number of max offset slews per engagement (without delays for recharging energy storage) For all HK launchers: Time to launch munition from launch signal receipt

- Number of munitions per launcher

- Steady state power consumption

- Peak power consumption

- Error ranges associated with all numerical values Provide specifications for the launcher/countermeasure components as installed on the vehicle:

- Vertical and Horizontal Field of Regard

- For gimballed launchers: Time to slew to target from max angular offset

- For gimballed launchers: Number of max offset slews per engagement (without delays for recharging energy storage) For all HK launchers: Time to launch munition from launch signal receipt

- Number of munitions per launcher

6 HK Munition Data that descibes operation and characteristics of the HK APS munition Provide specifications for the HK munition:

- Warhead type (fragmentation, blast, etc…)

- Warhead composition (explosive type, explosive ammount, etc...)

- Interceptor/munition type (guided flyout, unguided flyout, fixed, pop and pitch, etc…)

- Velodyne model of the interceptor for end-game modeling

- Fuze type (timed fuze, proximity fuze, impact fuze, etc…)

- Min/max intercept range

- For pop and pitch munitions: Time to kick

- For pop and pitch munitions: Time to pitch

- For pop and pitch munitions: Time to arrest

- For all munition types: Time of flight for min/max intercept ranges

- Probability of intecrept for each threat type

- Probability of defeat with no jet formation at min/max intercept ranges

- Probability of defeat with partial jet formation at min/max intercept ranges

- Error ranges associated with all numerical values Provide specifications for the HK munition:

- Warhead type (fragmentation, blast, etc…)

- Warhead composition (explosive type, explosive ammount, etc...)

- Interceptor/munition type (guided flyout, unguided flyout, fixed, pop and pitch, etc…)

- Detailed CAD model of HK munition in STEP, IGES, Pro-E or Velodyne format

- Fuze type (timed fuze, proximity fuze, impact fuze, etc…)

- Min/max intercept range

- For pop and pitch munitions: Time to kick

- For pop and pitch munitions: Time to pitch

- For pop and pitch munitions: Time to arrest

- For all munition types: Time of flight for min/max intercept ranges

- Probability of intecrept for each threat type

- Probability of defeat with no jet formation at min/max intercept ranges

- Probability of defeat with partial jet formation at min/max intercept ranges

- Error ranges associated with all numerical values 7 Soft-Kill (SK) Countermeasure Information Data that describes operation of SK APS countermeasures Provide specifications for the SK countermeasure components as installed on the vehicle:

- Vertical and Horizontal Field of Regard

- For gimballed launchers: Time to slew to target from max angular offset

- For gimballed launchers: Number of max offset slews per engagement (without delays for recharging energy storage)

- Time to emit from launch signal receipt

- Minimum time on target

- Pointing accuracy

- Beam divergence

- Beam power

- Cool down time between successive emmission events

- Minimum/Maximum effective distance

- Probability of defeat per threat (defeat is defined as the failure of the threat to hit, damage, or endanger its intended target as a result of the influence of the SK countermeasure on the threat guidance control system)

- Steady state power consumption

- Peak Power consumption

- Error ranges associated with all numerical values

Provide specifications for the SK countermeasure components as installed on the vehicle:

- Vertical and Horizontal Field of Regard

- For gimballed launchers: Time to slew to target from max angular offset

- For gimballed launchers: Number of max offset slews per engagement (without delays for recharging energy storage)

- Time to emit from launch signal receipt

- Minimum time on target

- Pointing accuracy

- Beam divergence

- Beam power

- Cool down time between successive emmission events

- Minimum/Maximum effective distance

- Probability of defeat per threat (defeat is defined as the failure of the threat to hit, damage, or endanger its intended target as a result of the influence of the SK countermeasure on the threat guidance control system)

- Error ranges associated with all numerical values

8 APS System Timeline Description Data that describes overall APS timeline from threat detection until threat defeat Provide a timeline analysis demonstrating the overall APS system engagement time for each threat to include:

- Time to detect threat

- Time to declare threat

- Time to classify threat

- Time to compute initial FCS

- Time to converge FCS

- Time to slew

- Time to launch HK interceptor/Time to emit SK EM energy

- For HK: Time of flight to intercept point from launch at min/max intercept ranges For SK: Time on target at min/max ranges

- Error ranges associated with all numerical values Provide a timeline analysis demonstrating the overall APS system engagement time for each threat to include:

- Time to detect threat

- Time to declare threat

- Time to classify threat

- Time to compute initial FCS

- Time to converge FCS

- Time to slew

- Time to launch HK interceptor/Time to emit SK EM energy

- For HK: Time of flight to intercept point from launch at min/max intercept ranges For SK: Time on target at min/max ranges

- Error ranges associated with all numerical values 9 APS System Probability of Effectiveness Data that describes the overall APS probability of effectiveness Provide an analysis demonstrating the overall APS system probability of effectiveness for each threat to include:

- Probability of threat detection

- Probability of threat declaration

- Probability of threat classification

- Probability of launch/emit

- Probability of intercept

- Probability of defeat (no jet formation)

- Probability of defeat (partial jet formation)

- Error ranges associated with all numerical values

- Justification for provided numerical data (source of data; e.g. test, analysis, etc...)

Provide an analysis demonstrating the overall APS system probability of effectiveness for each threat to include:

- Probability of threat detection

- Probability of threat declaration

- Probability of threat classification

- Probability of launch/emit

- Probability of intercept

- Probability of defeat (no jet formation)

- Probability of defeat (partial jet formation)

- Error ranges associated with all numerical values

- Justification for provided numerical data (source of data; e.g. test, analysis, etc...)

10 APS Safety Assessments Data that describes any US/foreign safety board engagements and outstanding findings Safety Board Confirmation Letters Safety Board Memo of Findings

- MAF Design Model

- Self-assessment of MAF requirements compliance

- Identification of any deficiencies or gaps in meeeting MAF requirements

&"-,Bold"UNCLASSIFIED Solicitation No.: W56HZV-22-R-0026 Attachment 0057

&"-,Bold"UNCLASSIFIED image1.png