Attachment 0016 - PA171 Drawings 13006756 and 13006757.pdf

A

B

C

D

E

F

A

B

C

D

E

F

8 7 6 5 4 3 2 1DRAWING SIZE F

SIZE CAGE CODE

SCALE SHEET

FORMAT: F_TACOM_ENG_1_0

UNIT WT.

DESIGN ACTIVITYCONTRACT NUMBER

CONTRACTOR

DRAWN BY DATE (YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWNG APPROVAL

DESIGN APPROVAL

THIRD ANGLE PROJECTION

MATL ENGR MODELED BY

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

PMIC

12345678

DWG NO.

BAC2015-11-24NOR R15T2002 / 2015-11-06G

COMBINATION OF ADOPTED ITEMS FOR

CARTRIDGE, 120MM, TPMP-T, M1002

(W/ RPD-596 PROPELLANT) (WOOD PALLET)

1315-01-632-2680 CA31 (13054378)

COMBINATION OF ADOPTED ITEMS FOR

CARTRIDGE, 120MM, TPMP-T, M1002

(W/ RPD-596 PROPELLANT, METAL PALLET)

(U.S. ARMY USE ONLY)

1315-01-632-2676 CA31 (13054379)

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAWING REV

BAC2011-11-14

REDRAWN WITH CHANGE

NOR R11K3022 / 2011-11-02

F

1 OF 2N/A 1/2

1300675619200F

PACKING AND MARKING FOR CONTAINER,

AMMO, METAL, PA171 FOR

CRTG. 120MM, TPMP-T, M 1002

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

B NICEWANNER 2004-01-15

(REQUIRED) J.L. REIDER

WILLIAM INGOLD

DONALD GUZIEWICZ

DO NOT SCALE DRAWING

B NICEWANNER

13054379 M1002

13054378 M1002

13006739 M1002

NEXT ASSY USED ON

APPLICATION

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

PART NO. 13006756

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

REV STATUS

OF SHEETS

REV G G

SHEET 1 2

TABLE I (FOR REFERENCE PURPOSES ONLY)

LINE

NUMBER

DESCRIPTION NSN DODIC COAI

COMBINATION OF ADOPTED ITEMS FOR

CARTRIDGE, 120MM, TPMP-T, M1002

(W/ M14 PROPELLANT)

1315-01-509-3555 CA31 (13006739)

NOTES:

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100

B. ASME Y14.5-2009

2. DELETED

3 DELETED

4 DELETED

5 DELETED.

6. QAP13006740 APPLIES TO THIS ITEM.

7. ALTERNATE SCREW ASSEMBLY: SCREW-(9344039), RETAINER, WASHER-(9344041) AND WASHER-(9344038)

MAY BE USED.

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

PACKING INSTRUCTION

P1. ALL MATERIAL SHALL BE THOROUGHLY DRY AT THE TIME OF PACKING. MAXIMUM MOISTURE CONTENT

OF CUSHIONING MATERIAL AND PAPER PRODUCTS SHALL BE 9%.

P2 REMOVE COVER ASSEMBLY-(12934838), PULL THE FOAM TUBE AND PROJECTILE SUPPORT

ASSEMBLY, M1002-(13006759) OUT OF THE CONTAINER, AMMO, METAL, PA171-(12990755) UNTIL THE FOAM TUBE AND PROJECTILE SUPPORT ASSEMBLY, M1002-(13006759) STOPS. ALLOW THE STRAP LOOP

TO FALL CLEAR OF THE SLEEVE INSIDE DIAMETER.

P3 INSERT CARTRIDGE, 120MM, TPMP-T, M1002-(13006740) INTO THE FOAM TUBE AND PROJECTILE SUPPORT ASSEMBLY, M1002-(13006759) UNTIL THE CARTRIDGE, 120MM, TPMP-T, M1002-(13006740) IS SEATED INTO THE SUPPORT, PROJECTILE, MOLDED-(12527492). IF NECESSARY, HOLD THE FOAM TUBE AND PROJECTILE ASSEMBLY, M1002-(13006759) IN PLACE BY PULLING ON THE STRAP LOOP WHILE INSERTING THE CARTRIDGE-(13006740).

P4. AFTER THE CARTRIDGE-(13006740) IS SEATED, PUSH THE CARTRIDGE-(13006740) AND THE FOAM TUBE AND PROJECTILE SUPPORT ASSEMBLY, M1002-(13006759) INTO THE CONTAINER, AMMO, METAL, PA171-(12990755) UNTIL THE CARTRIDGE-(13006740) TOUCHES THE BOTTOM. THE STRAP LOOPS SHOULD APPROXIMATE A HORIZONTAL POSITION

WHEN THE STACKING PLUGS-(9386837)ARE POSITIONED AT THE TOP OF THE CONTAINER.

P5 AS SHOWN IN VIEW C-C AND VIEW D-D, INSERT SPACER, CHIPBOARD, RECTANGULAR -13006770 AS REQUIRED FOR A TIGHT PACK . THE SPACERS-13006770 SHALL BE INSERTED BETWEEN SPACER, CUSHION, FOAM-(12990845) AND

CUSHION, BASE, FOAM-(12597644) BETWEEN THE RATCHET PINS-(12990847).

P6 REINSTALL COVER ASSEMBLY-(12934838) IN CONTAINER, AMMO, METAL, PA171-(12990755). ROTATE INTO POSITION AND LOCK. INSERT SPRING CLIP,HAIRPIN-(12934837) INTO UPPER HOLES IN SUPPORT, SHAFT-(12934841-1)

AND HANDLE, SQUARE-(12929273-1) TO SECURE COVER ASSEMBLY-(12934838).

P7 CONDUCT AIR LEAK TEST. THE CONTAINER SHALL BE SUBJECTED TO 3.0 +0.5 PSIG (INTERNAL) AIR PRESSURE.

AFTER STABILIZATION, THE AIR PRESSURE WITHIN THE CONTAINER SHALL BE MEASURED FOR 5 SECONDS MINIMUM. AIR LEAK RATE SHALL NOT EXCEED 35 cc/MIN. ASSEMBLE SCREW-(13020941, SEE NOTE 7) AND WASHER-(9344038, SEE NOTE 7) INTO PRESSURE HOLE AND TORQUE TO 30+5 IN-LBS. IF A PRESSURE TEST PROBE IS USED.

NO GREASE SHALL BE APPLIED TO THE PROBE BEFORE THE PROBE IS FITTED INTO AIR TEST HOLE.

P8 INSTALL SEAL, METALLIC-8794342 THROUGH LOWER HOLES IN SUPPORT, SHAFT-(12934841-1) AND HANDLE, SQUARE-(12929273-1) OF COVER ASSEMBLY-(12934838).

MARKING INSTRUCTIONS

M1. PRIOR TO MARKING, RETOUCH EXTERIOR SURFACES OF CONTAINER WHERE NECESSARY,

USING PAINT, ENAMEL PER MIL-E-52891, APPROXIMATE COLOR NUMBER 34079 (FOREST GREEN) PER

FED-STD-595.

M2 MARK CONTAINER, AMMO, METAL, PA171, WITH CHARACTERS APPROXIMATELY .50 INCHES

HIGH LOCATED LONGITUDINALLY BETWEEN THE TWO RINGS. THE MILLIMETER

MARKING "mm" MAY BE EITHER UPPER OR LOWER CASE LETTERS.

M3 MARK GROSS WEIGHT IN POUNDS AS SHOWN ON MARKING DIAGRAM.

M4 MARK UN PERFORMANCE-ORIENTED PACKAGING STENCIL LOCATED ON THE OPPOSITE

SIDE OF THE CONTAINER (APPROXIMATELY 180�$�) FROM THE MARKING STENCIL AS

SHOWN. ALL CHARACTERS MUST BE APPROXIMATELY .50 INCHES HIGH AND IN THE SAME COLOR

AND MATERIAL AS THE IDENTIFICATION MARKING.

M5 ADD THE LAST TWO DIGITS OF THE YEAR OF CONTAINER MANUFACTURE OR YEAR

PACKED.

M6 MARK PROPER SHIPPING NAME AND IDENTIFICATION NUMBER AS SHOWN ON MARKING

STENCIL.

M7 MARKINGS SHALL BE MADE USING APPROXIMATE COLOR WHITE NO. 37875 PER FED-STD-595, STENCIL INK, TYPE I, III, OR IV PER SPEC A-A-208.

M8 MARK THE DEPARTMENT OF DEFENSE IDENTIFICATION CODE (DODIC) AND LOT NUMBER AS SHOWN

ON THE INSIDE INDICATED SURFACE OF THE RIM. CHARACTERS SHALL BE APPROXIMATELY

.25 INCH HIGH.

DODIC: XXXX

LOT:

M9 MARK THE AMMUNITION LOT NUMBER ON THE CONTAINER BOTTOM IN APPROXIMATE LOCATION SHOWN.

CHARACTERS SHALL BE APPROXIMATELY .50 INCHES HIGH AND SHALL BE UNDERLINED WITH A LINE

APPROXIMATELY .125 INCHES THICK.

M10 MARK DODIC NUMBER. CHARACTERS SHALL BE APPROXIMATELY .50 INCHES HIGH.

M11 MARK NATIONAL STOCK NUMBER (NSN) AS SHOWN IN THIS DRAWING USING THE NSN LISTED ON THE COMBINATION OF ADOPTED ITEMS (COAI) DRAWING ASSOCIATED WITH THIS PACKING AND MARKING

DRAWING (REFERENCE TABLE I).

M12 MARK DEPARTMENT OF DEFENSE IDENTIFICATION CODE (DODIC) AS SHOWN IN THIS DRAWING USING THE DODIC LISTED ON THE COMBINATION OF ADOPTED ITEMS (COAI) DRAWING ASSOCIATED WITH THIS

PACKING AND MARKING DRAWING (REFERENCE TABLE I).

REFERENCE DATA:

FOR CARTRIDGE, 120MM, TPMP-T, M1002-(13006740)

USE - THE CONTAINER IS REUSABLE AND CAN BE RECYCLED WHENEVER POSSIBLE.

C

D

E

F

A

B

C

D

E

F

8 7 6 5 4 3 2 1DRAWING SIZE F

SIZE CAGE CODE

SCALE SHEET

FORMAT: F_TACOM_ENG_1_0

UNIT WT.

DESIGN ACTIVITY

12345678

DWG NO.

.54 .03

3X APPROXIMATELY .88

APPROXIMATELY .25

.25�#�.03

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAWING REV

BAC2011-11-14

REDRAWN WITH CHANGE

NOR R11K3022 / 2011-11-02

F

BAC2015-11-24NOR R15T2002 / 2015-11-06G

M8

P3

M7

M12 M7 M8

M9

M10

M7

M7 M12

P2

P5

P7

P6

P8

M3 M7

M11M7M2

M12 M7 M2

M2

M6 M2 M7

M2M7

M5 M4M7

P5

CONTAINER AND CUSHION ASSEMBLY, CARTRIDGE, 120MM, TPMP-T, M1002

13006757

SPACER, CHIPBOARD, RECTANGULAR

13006770

SEAL, METALLIC

8794342

2 OF 2N/A1/2

1300675619200F

PACKING AND MARKING FOR CONTAINER,

AMMO, METAL, PA171 FOR

CRTG. 120MM, TPMP-T, M 1002

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

PART NO. 13006756

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

SEAL, METALLIC87943421920011

CONTAINER AND CUSHION ASSEMBLY, CARTRIDGE, 120MM, TPMP-T, M1002130067571920012

SPACER, CHIPBOARD, RECTANGULAR1300677019200AR3

VIEW A-A

SEE VIEW D-D

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

SECTION C-C

SEE MARKING STENCIL AND

MARKING INSTRUCTION

CARTRIDGE, 120MM, TPMP-T, M1002

(13006740)

COVER ASSEMBLY-

(12934838)

SEE UN PERFORMANCE ORIENTED

PACKAGING STENCIL

ISO VIEW

SCALE 1/1

MARKING STENCIL

SCALE 1/1

UN PERFORMANCE ORIENTED PACKAGING STENCIL

2.00 .03

CUSHION, BASE, FOAM -(12597644)

SPACER, CHIPBOARD, RECTANGULAR

(13006770)

SPACER, CUSHION, FOAM -(12990845)

BASE OF 120MM M1002 TPMP-T CARTRIDGE

(13006740)

VIEW D-D

SCALE NONE

CONTAINER OMITTED FOR CLARITY

C

D

E

F

A

B

C

D

E

F

8 7 6 5 4 3 2 1DRAWING SIZE F

SIZE CAGE CODE

SCALE SHEET

FORMAT: F_TACOM_ENG_1_0

UNIT WT.

DESIGN ACTIVITYCONTRACT NUMBER

CONTRACTOR

DRAWN BY DATE (YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWNG APPROVAL

DESIGN APPROVAL

THIRD ANGLE PROJECTION

MATL ENGR MODELED BY

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON ANGLES �# �$

2 PLACE DECIMALS �#

3 PLACE DECIMALS �#

PMIC

12345678

DWG NO.

A

A

B

B

F

F

C

C

E

E

NO ADHESIVE IN

THIS SECTION

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAWING REVMODEL REV

BAC2011-11-14

REDRAWN WITH CHANGE

NOR R11K3022 / 2011-11-02

DD

1 OF 1N/A 1/2

1300675719200F

CONTAINER AND CUSHION

ASSEMBLY, CARTRIDGE,

120MM, TPMP-T, M1002

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

W HIERLMAIRER 2004-01-15

K CORNELL J.L. REIDER

WILLIAM INGOLD

DONALD GUZIEWICZ

DO NOT SCALE DRAWING

B NICEWANNER

13006756 M1002

NEXT ASSY USED ON

APPLICATION

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

PART NO. 13006757

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

REMARKS

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

CUSHION, BASE, FOAM125976441920011

YOKE ASSEMBLY129123371920012

SCREW, SEAL129123711920013

CONTAINER, AMMO, METAL, PA171129907551920014

SPACER, CUSHION, FOAM129908451920015

RATCHET PIN129908471920026

FOAM TUBE AND PROJECTILE SUPPORT ASSEMBLY, M1002130067591920017

PACKING, PREFORMEDMS28775-0149690618

SECTION B-B

SLEEVE AND STRAP ASSEMBLY-13006760, SPACER, CUSHION, FOAM-12990845

AND RATCHET PIN-12990847 NOT SHOWN FOR CLARITY

NOTES:

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100

B. ASME Y14.5-2009

2. QAP 13006740 APPLIES TO THIS ITEM.

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

ASSEMBLY INSTRUCTIONS

A1. ALL MATERIAL SHALL BE THOROUGHLY DRY AT TIME OF ASSEMBLY. MAXIMUM MOISTURE CONTENT OF

CUSHIONING MATERIAL AND PAPER PRODUCTS SHALL BE 9%.

A2. REMOVE COVER ASSEMBLY-(12934838) TO OPEN CONTAINER, AMMO, METAL, PA171-12990755.

A3 ASSEMBLE YOKE ASSEMBLY-12912337 TO THE FOAM TUBE AND PROJECTILE SUPPORT ASSEMBLY, M1002-13006759 BY ENGAGING THE YOKE STOPS INTO THE NOTCHES ON THE SUPPORT, PROJECTILE , MOLDED-(12527492) AS SHOWN.

A4 SLIDE THE YOKE ASSEMBLY-12912337 AND THE FOAM TUBE AND PROJECTILE SUPPORT ASSEMBLY, M1002-13006759

INTO THE CONTAINER, AMMO, METAL, PA171-12990755.

A5 APPLY COMPOUND, SILICON-MIL-C-21567 OR GREASE, FLUOROSILICONE-12525047 TO PACKING, PREFORMED-MS28775-014.

ASSEMBLE SCREW, SEAL-12912371 AND PACKING, PREFORMED-MS28775-014 THROUGH HOLE IN THE BOTTOM OF THE CONTAINER, AMMO, METAL, PA171-12990755 TO THE YOKE ASSEMBLY-12912337 WITH A TORQUE OF 55 �#5 INCH-POUNDS WITH THE STACKING PLUG-(9386837), LOCATED ON THE RIM-(9386827-1) OF THE CONTAINER, FACING UP. THE STRAP OF THE FOAM TUBE AND PROJECTILE SUPPORT ASSEMBLY, M1002-13006759 SHOULD APPROXIMATE A HORIZONTAL POSITION

AFTER INSTALLING THE SCREW, SEAL-12912371.

A6 BOND THE CUSHION, BASE, FOAM-12597644 TO THE COVER ASSEMBLY-(12934838) WITH ADHESIVE-9275690 AS SHOWN IN SECTION B-B. ADHESIVE-9275690 SHALL BE APPLIED TO WITHIN .295 �#.060 OF EDGE OF COVER ASSEMBLY-(12934838) EXCEPT WHERE PRESSURE LEAK CHECK TAP IS LOCATED. CENTER THE CUSHION, BASE, FOAM-12597644 ON THE COVER ASSEMBLY-(12934838).

THE CUT OUT AREA ON THE CUSHION, BASE, FOAM-12597644 SHALL BE CENTERED ON THE PRESSURE LEAK CHECK TAP. ADHESIVE-9275690 MUST BE DRY BEFORE THE COVER ASSEMBLY-(12934838) IS ASSEMBLED TO THE CONTAINER, AMMO, METAL, PA171-12990755.

A7. INSTALL COVER ASSEMBLY-(12934838) WITH BONDED CUSHION, BASE, FOAM-12597644 ON CONTAINER, AMMO, METAL, PA171-12990755.

ROTATE INTO POSITION AND LOCK. INSERT SPRING CLIP,HAIRPIN-(12934837) INTO UPPER HOLES IN SUPPORT, SHAFT-(12934841-1)

AND HANDLE, SQUARE-(12929273-1) TO SECURE COVER ASSEMBLY-(12934838).

A8 SECURE SPACER, CUSHION, FOAM-12990845 TO CUSHION, BASE, FOAM-12597644 USING TWO (2) RATCHET PINS-12990847 AS SHOWN IN SECTION B-B AND SECTION F-F. RATCHET PINS-12990847 SHALL BE LOCATED IN POSITIONS APPROXIMATELY180 �$ FROM EACH OTHER

WITH A MINIMUM SPACE OF 3.15" BETWEEN THEM.

PRESSURE LEAK

CHECK TAP

SLEEVE AND STRAP ASSEMBLY-13006760

NOT SHOWN FOR CLARITY

CUSHION, BASE, FOAM

(12597644)

COVER ASSEMBLY

(12934838)

SECTION A-A

SEE DETAIL D

SUPPORT, PROJECTILE, MOLDED

(12527492)

COVER ASSEMBLY

(12934838)

SECTION B-BSECTION F-F

SCALE 2/1

SECTION C-C

SECTION E-E

YOKE ASSEMBLY

(12912337)

DETAIL D

SCALE 4/1

CONTAINER, AMMO, METAL, PA171

(12990755)