Exhibit_C_-_Labor_Category_Descriptions-Qualifications_20_DEC_2016.pdf

W31P4Q-16-R-0036 Exhibit C

20 DEC 2016

AMCOM FLEET MANAGEMENT CENTER (AFMC) – LOGISTICS OPERATIONS

LABOR CATEGORY DESCRIPTION AND QUALIFICATIONS

TASK MANAGER. Must have a Bachelor’s degree from an accredited university or college in engineering, one of the physical sciences, mathematics, or a business curriculum, and eight (8) to ten (10) years experience in successfully managing groups with a variety of expertise in performing tasks involving major Defense Acquisition Programs and a Programs Manager’s Office. A major Defense Acquisition Program is defined as one of the following:

a. ACAT 1D or 1C – a program that has met the requirements of $355 million dollars in Research, Engineering, Development and Testing (RDE&T) or $2.1 billion dollars in procurement.

b. ACAT 1 – Major System – a program that has met the requirement of $144 million dollars in RDE&T or $645 million dollars in procurement.

Experience must include management of the fieldings and sustainment and the materiel change process; reference Para 4 of this performance statement. Task Manager must have experience in weapon systems managed by the Army Materiel Command (AMC), or managed by other Major Commands within the Department of Defense (DoD).

Experience shall include hardware and software management and depot maintenance support planning, and wholesale supply operations for major weapon systems. All experience requirements are essential and approximately equal in importance to the success of the fully mission capable (FMC) mission. Inclusive in the 8 or more years experience, the Task Manager must have a minimum of 2 years experience in the elements described in this performance statement Para 4.2, planning and resource management. The contractor shall employee a minimum of one (1) Task Manager. This Labor Category Description is categorized as Key Personnel and the position requires a designated alternate.

SENIOR, LOGISTICS ANALYST. Must have a Bachelor’s Degree and eight (8) to ten

(10) years experience in any logistics discipline in support of FMC, or managed by other Major Commands within DoD, and the weapon systems they manage, both hardware and software. Offerors may substitute five (5) additional years of experience for bachelor’s degree. Logistic Analyst must possess hands-on experience in Logistics Modernization Program (LMP) operations as relates to Para 4.2 of this performance statement. The Labor Category Description is categorized as Key Personnel, and the position requires a designated alternate.

LOGISTICS ANALYST. Must have a Bachelor’s Degree and five (5) or more years experience in any logistics discipline in support of FMC, or managed by other Major Commands within DoD, and the weapon systems they manage, both hardware and software. Offerors may substitute five (5) additional years of experience for bachelor’s degree. Logistic Analyst must possess hands-on experience in LMP operations as relates to Para 4.2 of this performance statement.

VELOCITY MANAGEMENT ANALYST (SITE MANAGER). Must have a Bachelor’s degree and five (5) years experience in the logistic disciplines as described in Para 4.2 of this performance statement in support of FMC and other DoD managed weapon systems, both hardware and software. Offerors may substitute five (5) additional years of experience for a bachelor’s degree. The contractor shall employee a minimum of one

(1) per FMC Centralized Distribution Activity (CDA) location. This Labor Category Description is categorized as Key Personnel and this position requires a designated alternate. Velocity Management Analyst must possess hands-on experience in LMP operations as relates to Para 4.2 of this performance statement.

VELOCITY MANAGEMENT TECHNICIAN. Must have a High School diploma or equivalent and two (2) years experience in any logistics discipline as described in Para

4.2 of this performance statement in support of FMC or other DoD managed weapon systems, both hardware and software. The number of Velocity Management Technicians at each FMC CDA is dependent upon the workload for that FMC CDA location. Logistic Analyst must possess hands-on experience in LMP operations as relates to Para 4.2 of this performance statement.

SENIOR GRAPHICS ILLUSTRATOR. Must have a Bachelor’s degree and five (5) years experience in graphics art and illustrations. Offerors may substitute five (5) additional years of experience for bachelor’s degree.

ADMINISTRATIVE SUPPORT. Must have a High School diploma or General Equivalency Diploma certificate. Minimum of five (5) years experience in administrative procedures and practices necessary for doing business with and within DoD agencies.

Demonstrates capability to oversee a group of assistants performing administrative functions. Must be highly proficient with the use of automated systems, with particular expertise in Microsoft Office applications.

ELECTRONIC MAINTENANCE TECHNICIAN (EMT) III. The EMT III shall be able to perform direct and general level support maintenance on PATRIOT Information and Coordination Central, Engagement Control Station, Radar set, Antenna Mast Group, Launching Station, Communication Relay Group equipment and Multiple Launch Rocket System (MLRS) M270/M270A1, HIMARS, and self propelled load launcher pod/container trainer and test support group. The EMT III shall be able to perform tests and adjust components to specific tolerances and determine shortcomings and malfunctions in electronic assemblies, subassemblies, modules and circuit elements with common and system particular test equipment. The EMT III shall be able to isolate malfunctions using automatic and semi-automatic program diagnostic software, unit self test and built in test equipment. The EMT III shall be able to repair unserviceable items by removing and replacing defective components. The EMT III shall perform initial, in process and final type inspections of designated system items and their assemblies, subassemblies, modules and circuit elements. The EMT III shall perform maintenance technical inspector duties. The EMT III shall be certified in PATRIOT, MLRS and/or HIMARS Weapon System maintenance, Original Equipment Manufacturer (OEM) trained and/or government accepted training.

EQUIPMENT MECHANIC, SUPERVISOR: The Heavy Mechanic Supervisor is responsible for supervising the servicing, repairing and maintenance of a variety of heavy equipment. Supervises and assists in the repair, service and modification of heavy duty equipment of a specialized nature. Makes inspections of work performed, and road tests equipment to determine the further usability or repair needs of equipment.

Supervises a number of skilled and unskilled workers engaged in the repair of heavy equipment.

EQUIPMENT MECHANIC, HEAVY: The Heavy Equipment Mechanic analyzes malfunctions and repairs, rebuilds and maintains power equipment, such as cranes, power shovels, scrapers, paving machines, motor graders, trench-digging machines, conveyors, bulldozers, dredges, pumps, compressors and pneumatic tools. This worker operates and inspects machines or equipment to diagnose defects, dismantles and reassembles equipment, using hoists and hand tools, examines parts for damage or excessive wear, using micrometers and gauges, replaces defective engines and subassemblies, such as transmissions, and tests overhauled equipment to insure operating efficiency. The mechanic welds broken parts and structural members, may direct workers engaged in cleaning parts and assisting with assembly and disassembly of equipment, and may repair, adjust and maintain mining machinery, such as stripping and loading shovels, drilling and cutting machines, and continuous mining machines.

SUPPLY TECHNICIAN: Supply technicians must be capable of performing limited aspects of technical supply management work to include operations on Property Book Unit Supply Enhanced Standard Army Management Information System for hand receipt creation, documentation and inventory measures. Daily tracking of equipment for unserviceable turn in, new equipment addition and upgrade of hand receipt in accordance with requirements. Daily administrative functions to include the use of Microsoft Office, including XP and Vista operating systems.

PRODUCTION CONTROL CLERK (PCC): The PCC shall compile and record production data for industrial establishments to compare records and reports on volume of production, consumption of material, quality control, and other aspects of production.

The PCC shall perform any combination of the following duties: compile and record production data from customer orders, work tickets, product specifications, and individual worker production sheets following prescribed recording procedures and using different word processing techniques. The PCC shall calculate such factors as types and quantities of items produced, materials used, amount of scrap, frequency of defects, and worker and department production rates, using a computer, calculator, and/or spreadsheets. Additional tasks include: writing production reports based on data compiled, tabulated and computed, following prescribed formats, maintaining files of documents used and prepared, compiling detailed production sheets or work tickets for use by production workers as guides in assembly or manufacture of products. The PCC shall prepare written work schedules based on established guidelines and priorities, compile material inventory records and prepare requisitions for procurement of materials and supplies charts production using chart, graph, or pegboard based on statistics compiled for reference by production and management personnel.

MECHANIC/WELDER: The Mechanic Welder must meet applicable certification.

Welds metal components together to fabricate or repair products, such as machine parts, plant equipment, motors and generators, according to layouts, blueprints or work orders, using brazing and a variety of arc and gas welding equipment. Welds metal parts together, using both gas welding or brazing and any combination of arc welding processes. Performs related tasks such as thermal cutting and grinding.

Repairs broken or cracked parts, fills holes and increases size of metal parts.

Positions and clamps together components of fabricated metal products preparatory to welding. May locate and repair cracks in industrial engine cylinder heads, using inspection equipment and gas torch. May perform repairs only.