W15QKN22R0031-Amendment 0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0002 2022APR29

W15QKN

ARMY CONTRACTING COMMAND - NJ

PICATINNY ARSENAL, NJ 07806-5000

ARIAN SOMMERS

EMAIL: ARIAN.R.SOMMERS.CIV@ARMY.MIL

W15QKN-22-R-0031

2022FEB14

X

X 2022MAY30 03:00pm

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 22

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: ARIAN SOMMERS

Buyer Office Symbol/Telephone Number: CCNJ-CA/(973)724-7844

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

Amendment 0002 to RFP W15QKN-22-R-0031 is being issued to answer Question 24 - 28 and to make the following changes:

1. Question 24 - Considering that 120MM M931 & 120mm M931 (one piece shell body) are two different items, we request to add in the price matrix and the RFP, individuals clins for FAT requirements for the M931 (one piece shell body).

Response: Individual CLINs for FAT requirements for the M931 (one piece shell body) are added to the price matrix and the RFP.

2. Question 25 - The RFP states in section M 3.1.1.2 subfactor 2 that: The risk of the delivery schedule will be assessed against a required FAT due date of 8 months after contract award. As the USG is not ordering any 120mm FRPC in Ordering Period 1 and 2, what is the FAT due date for the 120mm FRPC?

Response: The FAT due date for the 120mm FRPC would be 8 months after ordering period 3 begins or 32 months after contract award (12 months for ordering period 1, 12 months for ordering period 2, and then 8 months after that).

3. Question 26 - For deliveries, and the corresponding Lot Acceptance Test (LAT), there is no specified time frame in the proposal that the USG has to approve the LAT and consider the supplies delivered. How many days is the USG allotting to accept deliveries?

Response: The Government has 60 days from shipment of ballistic samples to the proving ground to either accept or reject the lot.

4. Question 27 - When reviewing the proposal and building the IMS, we realize that the USG is providing no time for the bidders to present a successful FAT, install new equipment and meet CDRL submittal requirements. Please see the analysis below: In section B -

Supplies or Services and Prices/Costs, items 0001, 0003, and 2007 have the requirement: First Article is due no later than 6 months after delivery order award. This is a contract deliverable, meaning that the FAT is approved by the USG, the receiving report is completed, signed, and the items are considered delivered. In section I Contract Clauses, I-140 First Article Approval, paragraph b:

Within 60 calendar days after the Government receives the test report, the Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. Working backwards, this leaves 4 month to perform the FAT and submit the report. However, CDRL A008: Measurement System Evaluation (MSE) states in section 16: Submit at least 180 days prior to

FAT, or production if FAT is waived. CDRL A012: Critical Characteristics Control Plan (CCCP), also has a 180 prior to FAT requirement.

This means 180 days before performing the FAT. Taking the hypothesis that the FAT is performed, and the report is submitted to the USG all on the same day: 4 months after award to meet the deliverables in section B. Working backward, the MSE and CCCP would have to be submitted 180 days prior to performing the FAT (again the FAT needs to be performed 4 months after award). Thus, to meet the requirement of the 180 days prior to FAT performance, the MSE and CCCP submittal would need to occur 2 months prior to award. This does not allow for any contractor to develop and install equipment, which needs to be fully operational for the MSE and CCCP. Even with a qualified manufacturing line and existing equipment, submitting an MSE and CCCP 2 months prior to award is not feasible as the contractor doesnt know when the award will occur in an IDIQ. We are in the process of constructing an IMS that is realistic and achievable (which meets the CDRLS and the RFP requirements). However, the constraints listed above do not allow any contractor to present a successful IMS. - In light of these findings we would request an extension of 2 weeks and discussions to fully understand the requirements of the USG.

Response: First Article is due no later than 8 months after contract award. Additionally, CDRL A008 and CDRL A012 may be submitted 120 days prior to FAT instead of 180 days prior to FAT. The Government will extend the proposal submission date to May 30, 2022. Discussions are not held with offerors during the solicitation/proposal phase.

5. Question 28 Extension of 2 weeks is also requested considering that the question on EPA clause request is still pending.

Response: The Government will extend the proposal submission date to May 30, 2022.

6. To modify Section B by updating the narratives of the Initial First Article Test (FAT) CLINS 0001, 0003, 1001, 1004, 2001, 2004, 2007, 3001, 3004, 3007, 4001, 4004, and 4007 from FAT being due no later than 6 months to 8 months.

7. To modify Section B by adding CLINs 2011, 3011, 3012, 4011, and 4012 for FAT and AFAT requirements for the M931 (one piece shell body).

2 22

W15QKN-22-R-0031

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

8. To modify Section J by updating the Attachment 0001 60MM-81MM-120MM FRPC Price Matrix Attachment and updating Exhibit A DD1423 CDRL

Portfolio; CDRLs A008 and A012.

9. Extend the proposal submission due date from May 16, 2022 to May 30, 2022.

10. All other terms and conditions remain unchanged and in full effect.

*** END OF NARRATIVE A0003 ***

3 22

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

0001 60MM M769 FAT OP1 $ _________________ __________________

SERVICE REQUESTED: 60MM M769 FAT OP1

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M769 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 1 shall be from contract award to 12 months after contract award.

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M769 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. Transportation Account

Code (TAC) will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

0003 81MM M879A1 FAT OP1 $ ___________________ __________________

SERVICE REQUESTED: 81MM M879A1 FAT OP1

Contractor is responsible for conducting First

Article Testing on the M879A1 (FRPC) IAW Statement of

Work C.3.3.2.1.

4 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Ordering Period 1 shall be from contract award to 12 months after contract award.

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M879A1 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

5 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

1001 60MM M769 FAT OP2 $ _________________ __________________

SERVICE REQUESTED: 60MM M769 FAT OP2

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M769 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 2 shall be the period of 12 months from the end of Year 1 (Ordering Period 1).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M769 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

1004 81MM M879A1 FAT OP2 $ ___________________ __________________

SERVICE REQUESTED: 81MM M879A1 FAT OP2

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M879A1 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 2 shall be the period of 12 months from the end of Year 1 (Ordering Period 1).

6 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M879A1 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

2001 60MM M769 FAT OP3 $ _________________ __________________

SERVICE REQUESTED: 60MM M769 FAT OP3

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M769 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 3 shall be the period of 12 months from the end of Year 2 (Ordering Period 2).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M769 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

7 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

2004 81MM M879A1 FAT OP3 $ ___________________ __________________

SERVICE REQUESTED: 81MM M879A1 FAT OP3

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M879A1 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 3 shall be the period of 12 months from the end of Year 2 (Ordering Period 2).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M879A1 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

2007 120MM M931 FAT OP3 $ __________________ __________________

8 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SERVICE REQUESTED: 120MM M931 FAT OP3

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M931 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 3 shall be the period of 12 months from the end of Year 2 (Ordering Period 2).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M931 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

2011 120MM M931 FAT OP3 (ONE PIECE SHELL BODY) $ $ _________________________________________ ______________ __________________

COMMODITY NAME: 120MM M931 FAT OP3

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M931 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 3 shall be the period of 12 months from the end of Year 2 (Ordering Period 2).

First Article is due no later than 8 months after delivery order award.

9 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M931 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. Transportation Account

Code (TAC) will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

Deliveries or Performance _________________________

FOB POINT:

10 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

3001 60MM M769 FAT OP4 $ _________________ __________________

SERVICE REQUESTED: 60MM M769 FAT OP4

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M769 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 4 shall be the period of 12 months from the end of Year 3 (Ordering Period 3).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M769 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

3004 81MM M879A1 FAT OP4 $ ___________________ __________________

SERVICE REQUESTED: 81MM M879A1 FAT OP4

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M879A1 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 4 shall be the period of 12 months from the end of Year 3 (Ordering Period 3).

11 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M879A1 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award.

TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

3007 120MM M931 FAT OP4 $ __________________ __________________

SERVICE REQUESTED: 120MM M931 FAT OP4

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M931 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 4 shall be the period of 12 months from the end of Year 3 (Ordering Period 3).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M931 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

12 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

3011 120MM M931 FAT OP4 (ONE PIECE SHELL BODY) $ $ _________________________________________ ______________ __________________

COMMODITY NAME: 120MM M931 FAT OP4

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M931 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 4 shall be the period of 12 months from the end of Year 3 (Ordering Period 3).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M931 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. Transportation Account

Code (TAC) will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

13 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Deliveries or Performance _________________________

FOB POINT:

14 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

3012 120MM M931 AFAT OP4 (ONE PIECE SHELL BODY) $ $ __________________________________________ ______________ __________________

COMMODITY NAME: 120MM M931 AFAT OP4

CLIN CONTRACT TYPE:

Firm Fixed Price

Additional First Article Test (AFAT): An Additional

First Article Test is a FAT that takes place after an initial FAT has been conducted. An AFAT may be required for any change in process(es), or a break in production of more than 90 days. Because this is an

Additional FAT, existing processes and equipment are expected to be utilized to the maximum extent possible. Existing approved CDRL submissions from the initial FAT may be utilized provided they are unaffected by any changes.

First Article is due no later than 3 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination and DODAAC will be updated and is subject to change upon delivery order award.

TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

Deliveries or Performance _________________________

FOB POINT:

15 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

4001 60MM M769 FAT OP5 $ _________________ __________________

SERVICE REQUESTED: 60MM M769 FAT OP5

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M769 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 5 shall be the period of 12 months from the end of Year 4 (Ordering Period 4).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M769 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

4004 81MM M879A1 FAT OP5 $ ___________________ __________________

SERVICE REQUESTED: 81MM M879A1 FAT OP5

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M879A1 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 5 shall be the period of 12 months from the end of Year 4 (Ordering Period 4).

16 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M879A1 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

4007 120MM M931 FAT OP5 $ __________________ __________________

SERVICE REQUESTED: 120MM M931 FAT OP5

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M931 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 5 shall be the period of 12 months from the end of Year 4 (Ordering Period 4).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M931 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Delivery destination DoDAACs will be updated upon delivery order award. TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

17 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

4011 120MM M931 FAT OP5 (ONE PIECE SHELL BODY) $ $ _________________________________________ ______________ __________________

COMMODITY NAME: 120MM M931 FAT OP5

CLIN CONTRACT TYPE:

Firm Fixed Price

Contractor is responsible for conducting First

Article Testing on the M931 (FRPC) IAW Statement of

Work C.3.3.2.1.

Ordering Period 5 shall be the period of 12 months from the end of Year 4 (Ordering Period 4).

First Article is due no later than 8 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 M931 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination DoDAACs will be updated upon delivery order award. Transportation Account

Code (TAC) will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

18 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Deliveries or Performance _________________________

FOB POINT:

19 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

4012 120MM M931 AFAT OP5 (ONE PIECE SHELL BODY) $ $ __________________________________________ ______________ __________________

COMMODITY NAME: 120MM M931 AFAT OP5

CLIN CONTRACT TYPE:

Firm Fixed Price

Additional First Article Test (AFAT): An Additional

First Article Test is a FAT that takes place after an initial FAT has been conducted. An AFAT may be required for any change in process(es), or a break in production of more than 90 days. Because this is an

Additional FAT, existing processes and equipment are expected to be utilized to the maximum extent possible. Existing approved CDRL submissions from the initial FAT may be utilized provided they are unaffected by any changes.

First Article is due no later than 3 months after delivery order award.

Offeror(s) shall propose one (1) price for the entire lot. One Lot consisting of a quantity of 120 units shall be delivered for testing. Potential delivery locations for FAT are detailed in Section D.

Note: Delivery destination and DODAAC will be updated and is subject to change upon delivery order award.

TAC will be provided at time of delivery order award.

For Packaging and Marking specifics, see Section D of this Solicitation.

For Inspection and Acceptance specifics, see Section

E of this Solicitation.

For Deliveries and Performance specifics, see Section

F of this solicitation.

(End of narrative B001)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Destination

Deliveries or Performance _________________________

FOB POINT:

20 22

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

21 22

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION J - LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Exhibit A DD1423 - CONTRACT DATA REQUIREMENTS LIST (CDRLS) (A001- 26-APR-2022 022 EMAIL

A022)

Attachment 0001 PRICING MATRIX EXCEL SPREADSHEET 60/81/120MM FRPC LAP 25-APR-2022 001 EMAIL

22 22