V. nLight System - Unitouch Touch Screen Wall Switch (Basis of Design).pdf

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/23/22 nPOD Touch

Example: nPOD TOUCH WH

Switch Power Supply Type Color nPOD TOUCH [blank] Includes PS150 PS347 Includes PS150-347 NPWS No Power Supply

WH White BK Black

OVERVIEW

The nLight® UNITOUCH is an elegant capacitive touch screen wall switch that leverages the perfect blend between aesthetic design and intuitive user experience to enable control of any nLight controlled space.

Developed with end-users first at mind, the nLight® UNITOUCH is an easy-to-install wall switch that enables control of nLight-enabled devices, scenes, shades and channels behind a multi-user access level architecture.

Equipped with Bluetooth(R) Low Energy (BLE), the nLight UNITOUCH enables users the ability to remotely control lights and shades through the MyPersonify mobile app.

FEATURES

• 3.5” full-color responsive capacitive touch screen

• Slim and compact form factor

• Simple and intuitive user interface

• Proximity screen sensor for auto “wake-up”

• Customizable Screen Saver Image

• Supported file formats: JPG, PNG

• Optimal resolution: 320x480

• Full alpha-numeric nomenclature for scenes and lighting channels

• Controls up to 16 On/Off/Dim lighting and shade channels

• Controls up to 16 scene controls

• Enables on-screen customization of all preset scenes, On/Off/Dim lighting and shade channels

• Optional password protected lockout screen

• Multi-level password/PIN protection

• Enables wireless control of scenes, lights and shades through the MyPersonify mobile app

• Mounts to a single gang switch box

• Complies with California Civil Code Title 1.81.26, Security of Connected Devices, approved under Senate

Bill No. 327 (2018) nLight UNITOUCH™ Touch Screen Wall Switch

ORDERING INFORMATION

Catalog Number: Date: Project:

Warranty Five-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

http://www.acuitybrands.com/nLight https://www.acuitybrands.com/support/warranty/terms-and-conditions nPOD Touch

The nLight UniTouch is equipped with two RJ-45 ports to facilitate CAT5e daisy-chain connection with other nLight-enabled devices, and a set of power terminals where low voltage power is connected (from the provided PS 150 power supply module).

Mounting Instructions

To mount, the faceplate must be detached from the backplate. This will require an appropriately sized tool (i.e., flat-head screwdriver) that can fit in the release tab.

Using the appropriately sized tool, press in the release tabs on each side of the device until the backplate is noticeably released.

S T E P

S T E P

Pull the backplate out from the bottom, away from the faceplate, as pictured.

Device should be separated into two pieces, backplate and faceplate. The backplate will be used to mount onto a wall gang box.

S T E P

S T E P

Pull all wires out of the wall and run them through the central hole of the backplate. Screw the backplate onto the wall.

Plug the wire(s) into the connector(s), then gently push the excess wiring back into the wall. Reattach the front plate and ensure that it clips tightly in place. Tighten the security screw, if applicable.

S T E P

S T E P http://www.acuitybrands.com/nLight nPOD Touch

Electrical Input Ratings 15-24VDC, <1.5W, Class 2 (via included PS-150 or PS-150-347 power supply)

Standards/Ratings Energy Management Equipment, FCC Rules Part 15, Subpart B Class B

Mechanical Dimensions 5.18”H x 3.37”W x 0.75”D (131.5mm x 85.5mm x 19mm)

Mounting Single-Gang Box or Low Voltage Ring Connection Type RJ-45 nLight Network Ports (2)

Low-Voltage Terminals

Color: White, Black

Environmental Warrantied Operating Temperature Standard: 32°F to 122°F (0°C to 50°C)

Relative Humidity Up to 90%, Non-Condensing Standards/ Rating RoHS

General Standards/ Rating System Component to aid in compliance with Title 24, ASHRAE 90.1, IECC

Regulatory cULus Listed (E228719)

SPECIFICATIONS

http://www.acuitybrands.com/nLight