E. New Support RM 48-inch LED Strip Light Fixture (Basis of Design).pdf

Catalog Number

Notes

Type

LED Striplight

ZL1D

24", 48" and 96" Lengths

FEATURES & SPECIFICATIONS

INTENDED USE — Built on the compact, low-profile Z strip channel, this LED strip offers long mainte-nance-free life, several color temperatures, lumen outputs and lengths. Ideal for new construction and retrofit applications in T8 lengths. Ideal for use in commercial, retail, manufacturing, warehouse, and display applications. Certain airborne contaminants can diminish the integrity of acrylic and/ or polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.

CONSTRUCTION — Compact-design channel and cover are formed from code-gauge cold-rolled steel.

Easy to install six-point row aligner included for continuous row mounting.

Finish: Paint options include high-gloss, baked white enamel (WH), or matte black (MB). After fabrication, five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance.

OPTICS — Standard diffuse snap on/snap off lens eliminates pixels, improves uniformity and minimizes glare.

ELECTRICAL — Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring cool-running operation. Optional internal pluggable wiring harness for reduced labor cost in row mounting applications (see PLR_ ordering information on page 5). Electronic LED driver is rated for 75 input watts maximum (see Operational Data on page 4 for actual wattage consumption), multi-volt input and 0-10V dimming standard. This fixture is designed to withstand a maximum line surge of 2.5kV at 0.75kA combination wave for indoor locations, for applications requiring higher level of protection additional surge protection must be provided.

LEDs provide 80CRI or 90 CRI at 3000 K, 3500 K,4000 K or 5000 K.

Lumen output up to 1,500 lumens per foot. Luminaire should be installed in applications where ambient temperatures do not exceed 86°F (30°C).

INSTALLATION — Fixture may be surface mounted (with or without ZSPRG hanger), pendant or stem mounted with appropriate mounting options. Six-point aligner locks in place for easy continuous row mounting.

LISTINGS — CSA certified to US and Canadian safety standards. For use in damp locations between -40°F (-40°C) and 86°F (30°C).

DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.

Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

BUY AMERICAN ACT — Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations.

Please refer to www.acuitybrands.com/buy-american for additional information.

WARRANTY — 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at:

www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

COMMERCIAL INDOOR ZL1D

Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency

• This luminaire is part of an A+ Certified solution for nLight® or control networks marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus.

*See ordering tree for details http://www.acuitybrandslighting.com/Library/LL/documents/otherdocuments/Acrylic-Polycarbonate-Compatibility.pdf https://www.designlights.org/QPL https://www.acuitybrands.com/resources/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions http://www.acuitybrands.com/aplus

ZL1D

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com techsupport-commercialindoor@acuitybrands.com © 2013-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/21/23

ZL1D LED Striplight

Accessories: Order as separate catalog number.

HC36 M12 Hanger chain, 36" (1 pair) ZACVH M100 Adjustable 10' aircraft cable with Y hanger (1 pair) ZLANGBKT Luma-tilt™ angle bracket for shelf or ledge mounting only SQ_ Swivel stem hanger (specify length in 2" increments up to 48") NPP16D nLight® wired power/relay pack, 0-10VDC dimming output (LINK) RPP20D nLight® air Generation 2 enabled, power/relay pack, 0-10V dimming output (LINK) LSXR Sensor Switch® LSXR occupancy sensor (LINK) ZSPRG J2 Tong and T-grid hanger, for 15/16" T-grid (Order quantity required in multiples of 2) WGZ24 24" wireguard, white ‡ WGZ48 48" wireguard, white ‡

ZLR L24 SYM UPL WH 24" symmetric reflector with uplight, white finish ZLR L24 SYM WH 24" symmetric reflector, white finish ZLR L46 SYM UPL WH 46" symmetric reflector with uplight, white finish ZLR L46 SYM WH 46" symmetric reflector, white finish ZLR L48 ASY WH 48" asymmetric reflector, white finish ZLR L48 SYM UPL WH 48" symmetric reflector with uplight, white finish ZLR L48 SYM WH 48" symmetric reflector, white finish ZLR L92 SYM UPL WH 92" symmetric reflector with uplight, white finish ZLR L92 SYM WH 92" symmetric reflector, white finish ZLR L96 SYM UPL WH 96" symmetric reflector with uplight, white finish ZLR L96 SYM WH 96" symmetric reflector, white finish UNIVERSAL REFL ALIGNER Universal reflector aligners, quantity 1

Series Length Reflectors‡ Nominal lumens‡ Diffuser Voltage Color temperature Color rendering index

ZL1D LED striplight

TZL1D LED striplight ‡

L24 24" ‡

L48 48"

L96 96"

(blank) Less reflector SMR Symmetric

(blank) Less reflector ASR Asymmetric SMR Symmetric (blank) Less reflector SMR Symmetric

1500LM 1,500 lumens 2500LM 2,500 lumens 3500LM 3,500 lumens 3000LM 3,000 lumens 5000LM 5,000 lumens 7000LM 7,000 lumens 6000LM 6,000 lumens 10000LM 10,000 lumens 14000LM 14,000 lumens

FST Drop lens MVOLT 120-277V 120 120V 208 208V 240 240V 277 277V 347 347V ‡ 480 480V ‡

27K 2700 K 30K 3000 K 35K 3500 K 40K 4000 K 50K 5000 K

80CRI 80 CRI

90CRI 90 CRI

Options Paint finish

PLR__ Plug-in wiring‡ PLR1LVG Plug-in wiring-low voltage‡ E7W Emergency battery pack, 7W

CA Title 20 Noncompliant‡ 2E7W Two Emergency battery packs, 7W

CA Title 20 Noncompliant‡ E10WLCP Emergency battery pack, 10W Linear Constant Power, Certified in CA Title 20 MAEDBS‡ 2E10WLCP Two Emergency battery packs, 10W Linear Constant

Power, Certified in CA Title 20 MAEDBS‡ E15WLCP Emergency battery pack, 15W Linear Constant Power, Certified in CA Title 20 MAEDBS‡ OUTEND Cord set to exit endplate of fixture BAA Buy America(n) Act Compliant nLight® Wireless NLTAIR2 RLSXR10 nLight® Air Generation 2 enabled, 360° low mount sensor, (7 to 15’ heights) (LINK) NLTAIR2 RLSXR10EM nLight® Air Generation 2 enabled, 360° low mount sensor, (7 to 15’ heights),UL 924 Emergency Opera-tion, via power interrupt detection (not available with battery pack) (LINK) ‡

Individual Controls ‡ LBOZU 360° low mount LSXR PIR sensor, (7-15' mounting heights), ON/OFF occupancy, pre-wired (LINK) ‡ LBH0SZU 360° low mount LSXR PIR sensor, (7-15' mounting heights), high/low occupancy dimming, pre-wired (LINK) ‡ LBPZU 360° low mount LSXR PIR sensor, (7-15' mounting heights), ON/OFF photocell, pre-wired (LINK) ‡ LBM0SZU 360° low mount LSXR PIR sensor, (7-15' mounting heights), dimming and switching photocell, pre-wired (LINK) ‡ Cord sets: ‡ CS1W Cord with NEMA 5-15P, 120V straight blade plug, 18 gauge, 3 conductors, white, 6ft CS3W Cord with NEMA L5-15P, 120V twist lock plug, 18 gauge, 3 conductors, white, 6ft CS7W Cord with NEMA 7-15P, 277V straight blade plug, 18 gauge, 3 conductors, white, 6ft CS11W Cord with NEMA L7-15P, 277V twist lock plug, 18 gauge, 3 conductors, white, 6ft CS25W Cord with NEMA L24-20P, 347V twist lock plug, 18 gauge, 3 conductors, white, 6ft CS97W Cord with NEMA L8-20P, 480V twist lock plug, 18 gauge, 3 conductors, white, 6ft CS93W Cord only (no plug), 18 gauge, 3 conductors, white, 6ft

WH White MB Matte black GALVB Galvanized fixture with black plastic lens endcaps GALVW Galvanized fixture with white plastic lens endcaps

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: ZL1D L48 3000LM FST MVOLT 40K 80CRI WH

A+ Capable options indicated by this color background.

https://lithonia.acuitybrands.com/ mailto:techsupport-commercialindoor%40acuitybrands.com?subject= https://img.acuitybrands.com/public-assets/catalog/147279/npp16-efp.pdf?abl_version=06%2f30%2f2021+15:22:38&DOC_Type=SPEC_SHEET https://img.acuitybrands.com/public-assets/catalog/771135/rpp20.pdf?abl_version=06%2f30%2f2021+15:26:02&DOC_Type=SPEC_SHEET https://img.acuitybrands.com/public-assets/catalog/575660/lsxr-family.pdf?abl_version=06%2f30%2f2021+15:20:14&DOC_Type=SPEC_SHEET https://www.acuitybrands.com/products/detail/399070/Power-Sentry/PS730L-PS750L/-/media/products/Power_Sentry/399070/document/PS750L-Specification-Sheet_pdf.pdf https://www.acuitybrands.com/products/detail/399070/Power-Sentry/PS730L-PS750L/-/media/products/Power_Sentry/399070/document/PS750L-Specification-Sheet_pdf.pdf https://www.acuitybrands.com/products/detail/755258/Power-Sentry/PS1055LCP-Battery-Pack/-/media/products/Power_Sentry/755258/document/PS1055LCP_PS1555LCP_PS1555MCP_pdf.pdf https://www.acuitybrands.com/products/detail/755258/Power-Sentry/PS1055LCP-Battery-Pack/-/media/products/Power_Sentry/755258/document/PS1055LCP_PS1555LCP_PS1555MCP_pdf.pdf https://www.acuitybrands.com/products/detail/755258/Power-Sentry/PS1055LCP-Battery-Pack/-/media/products/Power_Sentry/755258/document/PS1055LCP_PS1555LCP_PS1555MCP_pdf.pdf https://img.acuitybrands.com/public-assets/catalog/850288/rlsxr.pdf?abl_version=06%2f30%2f2021+15:24:03&DOC_Type=SPEC_SHEET https://img.acuitybrands.com/public-assets/catalog/850288/rlsxr.pdf?abl_version=06%2f30%2f2021+15:24:03&DOC_Type=SPEC_SHEET https://img.acuitybrands.com/public-assets/catalog/575660/lsxr-family.pdf?abl_version=06%2f30%2f2021+15:20:14&DOC_Type=SPEC_SHEET https://img.acuitybrands.com/public-assets/catalog/575660/lsxr-family.pdf?abl_version=06%2f30%2f2021+15:20:14&DOC_Type=SPEC_SHEET https://img.acuitybrands.com/public-assets/catalog/575660/lsxr-family.pdf?abl_version=06%2f30%2f2021+15:20:14&DOC_Type=SPEC_SHEET https://img.acuitybrands.com/public-assets/catalog/575660/lsxr-family.pdf?abl_version=06%2f30%2f2021+15:20:14&DOC_Type=SPEC_SHEET

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com techsupport-commercialindoor@acuitybrands.com © 2013-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/21/23

ZL1D LED Striplight

‡ Option Value Ordering Restrictions Option value Restriction 2E7W Utilizes (2) Power Sentry PS750L emergency drivers. MVOLT required. Available with L96 only. Not available with L24, L48, L96 6000LM or any cordset that includes a plug.

2E10WLCP Utilizes (2) Power Sentry PS1055LCP emergency drivers. MVOLT required. Available with L96 10,000LM or 14000LM only. Not available with L24, L48, L96 6000LM or any cordset that includes a plug.

347, 480 Utilizes step down transformer.

Cordsets Must specify voltage when plug is included. CS93W available with MVOLT. Cordsets exit back of fixture unless OUTEND option is specified.

E7W Utilizes Power Sentry PS750L emergency driver. MVOLT required. Not available with L24 or any cordset that includes a plug.

E10WLCP Utilizes Power Sentry PS1055LCP emergency driver. MVOLT required. Available with L48 or L96 only. Not available with L24 or any cordset that includes a plug.

E15WLCP Utilizes Power Sentry PS1555LCP emergency driver. MVOLT required. Available with L96 only. Not available with L24, L48 or any cordset that includes a plug.

Individual Controls Available with MVOLT, 347 or 480 only. See ordering information on page 6 for more configurations. This sensor configuration is suitable for minimum ambient temperature of 14°F (-10°C). See page 6 for low temperature option providing -4°F (-20°C) minimum ambient. When choosing Sensor and PLR for same fixture, consult the factory. Sensors come prewired, they must be snapped into place at time of installation.

L24 Not available with 347V, 480V or Batteries nLight® Wireless See (LINK) in sensor description to RLSXR specification sheet for more configurations. When choosing a sensor and PLR for same fixture, consult the factory. Sensors come prewired, they must be snapped into place at time of installation.

NLTAIR2 RLSXR10EM MVOLT only.

Nominal Lumens See Operational Data on page 4 for actual lumens.

PLR _ _ Not available with cordset options. See ordering information on page 5. When choosing a sensor and PLR for the same fixture, consult the factory.

PLR1LVG Not available with cordset options.

Reflectors Optional. Reflectors ship separately.

TZL1D Tandem fixture comes as two L48 fixtures WGZ24 Not available with ASR or SMR reflector options.

WGZ48 Not available with ASR or SMR reflector options. Order a Qty of 2 for L96 tandem fixtures.

https://lithonia.acuitybrands.com/ mailto:techsupport-commercialindoor%40acuitybrands.com?subject=

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com techsupport-commercialindoor@acuitybrands.com © 2013-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/21/23

2.234

48.028

24.028

2.234

ZL1D L48

ZL1D L24

2.9882

2.9882

ZL1D LED Striplight

OPERATIONAL DATA

Nominal lumen package

Length (inches)

Delivered Lumens 3000K

CCT @ 77°F (25°C)

ambient temperature

Delivered Lumens 3500K

CCT @ 77°F (25°C)

ambient temperature

Delivered Lumens 4000K

CCT @ 77°F (25°C)

ambient temperature

Delivered Lumens 5000K

CCT @ 77°F (25°C)

ambient temperature Wattage

120V/277V

Comparable Light Source

80 CRI 90 CRI 80 CRI 90 CRI 80 CRI 90 CRI 80 CRI 90 CRI

Le ns ed

1500LM 24 1985 1619 2030 1675 2061 1707 2137 1745 17 1-lamp 17W T8

2500LM 24 2682 2187 2742 2264 2785 2307 2887 2358 22 1-lamp 17W T8

3500LM 24 4099 3341 4190 3459 4255 3524 4412 3603 36 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID

3000LM 48 3880 3163 3966 3274 4028 3336 4176 3410 30 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID

5000LM 48 5337 4351 5456 4504 5541 4589 5745 4691 41 2-lamp 32W T8, 1-lamp 54W T5H0, 70W HID

7000LM 48 7317 5965 7480 6175 7596 6291 7876 6431 59 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

6000LM 96 8077 6585 8257 6816 8386 6945 8694 7099 60 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

10000LM 96 11021 8985 11267 9301 11442 9477 11864 9687 81 4-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

14000LM 96 15397 12553 15741 12995 15986 13240 16574 13534 121 4-lamp 32W T8, 3-lamp 54W T5H0, 150W HID

DIMENSIONS

All dimensions are shown in inches (centimeters) unless otherwise noted.

Specifications subject to change without notice.

PALLET DIMENSIONS

Length Approximate weight

Fixtures per pallet

Approximate pallet dimensions (L x W x H)

L24 7 lbs. 176 46" X 51" X 31 5/8"

L48 13 lbs. 176 46" X 51" X 31 5/8"

L96 26 lbs. 63 46" X 98 1/2" X 31 3/8"

2.234

48.028

24.028

2.234

ZL1D L48

ZL1D L24

2.9882

2.9882

Knockout hole is .86in in diameter.

1.50

Mounting Hole Location - All Lengths

Operating Hours 0 15,000 30,000 45,000 60,000 100,000

Lumen Maintenance Factor 1 0.94 0.89 0.83 0.79 0.67

PROJECTED LUMEN MAINTENANCE

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com techsupport-commercialindoor@acuitybrands.com © 2013-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/21/23

ZL1D LED Striplight

PHOTOMETRICS

Please see www.lithonia.com

REFLECTORS (Optional)

L48 Reflector

L24 Reflector

L96 Reflector

48.00

24.00

96.00

10.70

3.67

10.70

3.67

10.70

3.67

PLUG-IN WIRING INFORMATION

Advanced plug-in system with two-circuit capability. Available on industrial and strip products and a variety of architectural products mounted in continuous rows. PLR22 (2-circuit) and crossover harness switches hot circuit serving next fixture in row. Reduces fixture types on job for alternating circuit applications (see example below.)

Easy one-step installation, saves up to 35% on labor costs. Expanded switching flexibility helps save energy.

Rows can be 50% longer with two-circuit systems. Polarized, lock-together nylon connectors prevent miswiring in the field. #12 THHN conductor, rated 600V, 90°C. White neutral wire included. Grounding accomplished by fixture in-row connectors.

CSA certified systems available with up to 2 circuits. G ground required.

Not for use with dedicated emergency circuits.

Note: Specifications subject to change without notice.

Wiring

PLR

Advanced 1 or 2-Circuit Plug-In

Typical Applications

• Multiple-circuit and single-circuit for longer continuous rows

• Multiple-circuit with alternating fixtures on separate circuits and 2-circuit PLR22

• Multiple circuit with night-lights located along row as desired

Series Number of hot wires Branch circuits Dimming Ground

PLR

PLR22

(blank) Not required for PLR22 1 Black 2 Black and red

Circuits to which driver is connected (blank) Not required for PLR22 or PLR1 A Black wire B Red wire

Battery charging circuit (must be unswitched) (blank) No battery charging circuit ELA Battery pack circuit wired to black wire ELB Battery pack circuit wired to red wire

LV Low-voltage dimming

G Ground (required)

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.

https://lithonia.acuitybrands.com/

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com techsupport-commercialindoor@acuitybrands.com © 2013-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/21/23

ZL1D LED Striplight

SINGLE RELAY

SELECTIONS BELOW WILL EXTEND ORDER LEAD TIME. CONSULT YOUR SALES REPRESENTATIVE FOR DETAILS.

Series Lens option Dimming/Photocell Max. dim level Min. dim level Temp/Humidity Default occupancy time delay

L LSXR passive infrared indoor occupancy sensor

A High mount, 360°

B Low mount, 360°

C High mount aisleway

O None1

H High/low occupancy operation

P Switching photocell (on/off)1

M Dimming and switching photocell

G Dimming and switching photocell with high/low oc-cupancy operation

0 10 VDC

9 9 VDC

8 8 VDC

7 7 VDC

S Minimum dim level of ballast

1 1 VDC

2 2 VDC

3 3 VDC

4 4 VDC

5 5 VDC

6 6 VDC

Z None T Low temperature2

I 30 sec D 2.5 min X 5.0 min R 7.5 min U 10.0 min

(with minimum 15 minute on time)

V 15.0 min W 20.0 min Y 30.0 min

ORDERING INFORMATION Example: LAH0SZU

DUAL RELAY (Available with 120, 277, and 347V only)

Series Lens option Poles Operating mode Temp/Humidity Default occupancy time delay

L LSXR passive infrared indoor occupancy sensor

A High mount, 360° B Low mount, 360° C High mount aisleway

2 Dual relay J None K Alternating off relays (promotes even lamp wear) O Alternating off relays w/photocell P Switching photocell(on/off) E Photocell on/off (pole 1 only) F Photocell on/off - both poles (dual set-point)

Z None T Low tempera-ture1

I 30 sec D 2.5 min X 5.0 min R 7.5 min U 10.0 min (with minimum

15 minute on time) V 15.0 min W 20.0 min Y 30.0 min

ORDERING INFORMATION Example: LA2KZU

Replacement lenses: Order as separate catalog number.

Series

LENS

Lens type 6 High mount 360° 10 Low mount 360° 50 High mount aisleway

Package quantity [blank] Single Lens J10 10-pack J100 100-pack

Example: LENS 50 J100

Notes

1 Max and min dim levels not applicable with this option.

2 Ambient temperature rating of -4°F (-20°C) to 131°F (55°C).

Notes

1 Ambient temperature rating of -4°F (-20°C) to 131°F (55°C).

LSXR – Fixture Mount Occupancy Sensor (see www.AcuityControls.com for additional information)

• Three interchangeable lens options to satisfy multiple mount-ing heights and coverage pattern requirements.

• Integrated mounting bracket drops lens down 3” from chase nipple.

• Single or dual relay versions — designed with robust protection from the harsh switching requirements of T5 and LED loads.

• Photocell and 0-10VDC dimming options.

• No PIR field calibration or sensitivity adjustments required.

• Sensor ambient temperature rating of 14°F (-10°C) to 131°F (55°C).

LSXR

configuration

Comparable CMRB sensor

Old style sensor nomenclature

For shortest lead times use one of the following LSXR configurations

LCOZU CMRB 50 MSI

LCH0SZU CMRB 50 D MSID

LCPZU CMRB 50 P MSIPED

LAOZU CMRB 6 MSI360

LAH0SZU CMRB 6 D MSI360D

LAPZU CMRB 6 P MSI360PED

https://lithonia.acuitybrands.com/ http://www.AcuityControls.com

COMMERCIAL INDOOR: One Lithonia Way, Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com techsupport-commercialindoor@acuitybrands.com © 2013-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 06/21/23

ZL1D LED Striplight

OPTIONS AND ACCESSORIES

The Z Series fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories.

HANGER CHAIN

36" chain with Y hanger.

Order as:

HC36

Z SPRING HANGER

Snap ‘n’ lock design requires no fasteners and can be used on T-grid ceiling or universal mounting systems.

Order as:

ZSPRG

ANGLE MOUNTING BRACKET

Luma-tilt™ angle bracket ships as a pair

Order as:

ZLANGBKT

ZACVH HANGER

10' Aircraft cable with Y hanger.

Order as:

ZACVH

WIRE GUARD

Order as:

WGZ24

WGZ48

https://lithonia.acuitybrands.com/ mailto:techsupport-commercialindoor%40acuitybrands.com?subject=