T. nLight System - Wallpod On & Off Control (Basis of Design).pdf
PDF 894 KB Posted
- Attached to
- C3 Interior LED Lighting
- Solicitation number
- 15F06723Q0000316
About this file
This technical bulletin describes the nPODM Series WallPods from Acuity Brands, which are nLight-enabled toggle and/or raise/lower switches for lighting zone control. The WallPods communicate via CAT-5e cable and RJ-45 connectors to provide on/off switching or dimming control of nLight networked lighting fixtures and power packs. Models include single channel, two channel, or four channel options for on/off or raise/lower functionality. Custom button engraving is available in certain colors. WallPods can be used in basic or three-way configurations and integrate into the nLight network. Technical specifications and installation instructions are provided.
The related federal contract opportunity is a solicitation from the Department of Justice Federal Bureau of Investigation Headquarters Division for C3 Interior LED Lighting. No further details are given regarding the products, services, response date, or award date for this lighting project requirement.
View the file
Other files
Show all 26
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight © 2014-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/30/23 nPODM nPODM Example: nPODM 2P WH
Series Preset Type Dimming Control Dynamic Color Temp/ Humidity nPODM [blank] Single channel 2P Two channels 4P Four channels
[blank] On/off control DX On/off + raise/lower control
[blank] Standard CCT1 Correlated color temperature GRSC1 Grayscale COLOR1 Color control
WH White IV Ivory GY Gray AL Almond BK Black RD Red
[blank] Normal LT Low temp
OVERVIEW
The nPODM Series WallPods are nLight-enabled toggle and/or raise/lower switches that provide a user with local control of a lighting zone. These single gang decorator style devices have soft-click buttons and have a green LED indicator for each button. WallPods communicate with other nLight devices via a CAT-5e cable that connects to one of its two RJ-45 connectors. A basic low voltage WallPod can work with an nLight power pack or nLight enabled fixture to provide toggle switch operation. WallPods with the DX option have the added ability to adjust the level of any nLight controlled dimmable lighting.
FEATURES
• Communicates with nLight network
• Remotely configurable/upgradeable
• Soft-click push-button control
• Custom button engraving (WH, IV, AL GY units only)
• 1, 2, or 4 channel on/off
• 1, 2, or 4 channel raise/lower
• “Dynamic” options for custom button names when pairing with Acuity Brands nTUNE fixtures nPODM Wallpod: On/Off & On/ Off+Raise/Lower
ORDERING INFORMATION
Catalog Number: Date: Project:
• Standard button labeling is shown on back.
• Custom lettering for WH, IV, AL, and GY units can be specified and ordered at:
https://img.acuitybrands.com/public-assets/catalog/147253/ngrave-form.pdf?abl_ version=08%2f13%2f2022+09%3a37%3a16&DOC_Type=Technical_Bulletins
• To ensure color uniformity, ordering templates facilitate specifiying all buttons on a unit as custom lettered. Replacing single buttons not recommended.
• Buttons may ship separately and require field installation.
CUSTOM BUTTON ENGRAVING
Warranty Five-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
Notes
1. Only available on 2P DX configurations
Capable This item is an A+ capable component, which has been designed and tested to provide out-of-the-box luminaire compatibility with simple commissioning, when included as part of an A+ Certified™ Solution.
To learn more about A+, visit www.acuitybrands.com/aplus.
https://img.acuitybrands.com/public-assets/catalog/147253/ngrave-form.pdf?abl_version=08%2f13%2f2022+09%3a37%3a16&DOC_Type=Technical_Bulletins https://img.acuitybrands.com/public-assets/catalog/147253/ngrave-form.pdf?abl_version=08%2f13%2f2022+09%3a37%3a16&DOC_Type=Technical_Bulletins http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx http://www.acuitybrands.com/aplus
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight nPODM
WIRING
TYPICAL WIRING
WallPods and/or nLight wall switch sensors can be configured together to create zones with multiple switching locations.
nPP16
CAT-5
LOAD
CAT-5
120 V 277 V
BLK
ORN
Power to WallPod device is provided via the CAT-5e connection to an nLight enabled fixture, nLight power pack (e.g. nPP16), power supply (nPS80), or Bridge (nBRG 8).
nPP16
CAT-5
LOAD
CAT-5CAT-5
120 V 277 V
BLK
ORN
ON/OFF ON/OFF + DIMMMING (nPODM DX)
3-WAY CONFIGURATION WIRING
[D] Dimming Control nPP16 D
CAT-5
LOAD
CAT-5
120 V 277 V
BLK
ORN
VIO
G
RY
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight nPODM
• Mount WallPod using holes that align with standard single gang switch box or low voltage ring
• Access RJ-45 ports by sliding plastic guard up
• Insert CAT-5e cable(s), T568B wiring convention recommended
• Slide guard back onto metal strap
• Interconnect unit with other nLight devices in lighting zone using CAT-5e cables
• Once power is received via CAT-5e connection, all devices in zone will automatically begin functioning together according to respective device’s defaults
SLID
E
TO RJ-45 PORT
TO RJ-45 PORT
CAT-5
CAT-5
PROGRAMMING
Refer to instruction card IN-11.3 for directions on programming the sensor via the upper-most left push-button. All buttons are factory set to the matching switch channel (button 1 - channel 1, button 2 - channel 2, etc). For nPODM 4P DX, channels to be controlled are selected first, then the control button (on/off or raise/lower).
INSTALLATION
Attention! Only use non-booted CAT5e cables.
nPODM 4P nPODM 4P DX
ON
OFF
ON
OFF
OFF
OFF
OFF
ON
ON
ON 1 2
3 4 nPODM nPODM DX nPODM 2P nPODM 2P DX nPODM 4PnPODM 4P nPODM 4P DX
ON
OFF
ON
OFF
OFF
OFF
OFF
ON
ON
ON 1 2
3 4 nPODM 4P DX
Custom lettering for WH, IV, AL, and GY units can be specified and ordered at:
https://img.acuitybrands.com/public-assets/catalog/147253/ngrave-form.pdf?abl_version=08%2f13%2f2022+09%3a37%3a16&DOC_Type=Technical_Bulletins
DEFAULT LABELING
Dynamic wallpod options feature custom button names when pairing with Acuity Brands nTUNE(TM) fixtures. Reference fixture cut sheets for additional details.
nPODM 2P DX CCTnPODM 2P DX CCT
ON/OFF
CCT
nPODM 2P DX GRSCnPODM 2P DX COLOR
ON/OFF
COLOR
nPODM 2P DX GRSC
ON/OFF
GRAYSCALE
nPODM 2P DX COLORnPODM 2P DX COLOR
ON/OFF
COLOR
https://img.acuitybrands.com/public-assets/catalog/147253/ngrave-form.pdf?abl_version=08%2f13%2f2022+09%3a37%3a16&DOC_Type=Technical_Bulletins
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight nPODM
Electrical Input Ratings 15-24VDC, 5mA, Class 2 (nLight network power)
Mechanical Dimensions 2.74”H x 1.68”W x 1.63”D (70mm x 43mm x 41mm) - does not include ground strap
Mounting Single-Gang Box or Low Voltage Ring Connection Type RJ-45 nLight Network Ports (2)
Environmental Warrantied Operating Temperature Standard: 32°F to 140°F (0°C to 60°C) LT Option: -4°F to 140°F(-20°C to 60°C)
Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings Energy Management Equipment, UL916 (E167435)
RoHS
Security Complies with California Civil Code Title 1.81.26, Security of Connected Devices, approved under Senate Bill No. 327 (2018)
SPECIFICATIONS
| Text Field 5: |
| Text Field 6: |
| Text Field 7: |
| Text Field 8: |
| Text Field 9: |
| Text Field 10: |
| Text Field 2: |
| Text Field 3: |
| Text Field 4: |
File details come from the government source that posted it. Updated .