R. nLight System - 8-Port Bridge (Basis of Design).pdf

Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight © 2014-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/12/23 nBRG - TN-701 nBRG 8

Series Voltage Temp/Humidity Power Supply Buy America(n)1 nBRG 8 Bridge [blank] 120/277VAC

347 347VAC

[blank] Standard LT Low temp

[blank] Unit Only KIT Kit w/ power supply

[blank] Standard BAA Buy America(n) Act Compliant

OVERVIEW

The nLight Bridge increases the number of lighting control zones in an nLight system. This ability stems from the fact that each Bridge has 8 RJ-45 ports into which zones of daisy-chained nLight devices can connect. The Bridge also is an integral component of the communication backbone in an nLight network. Fundamentally, Bridges act as hubs by aggregating traffic from the connected downstream zones and placing it onto the backbone. They also act as routers by forwarding information from the backbone out to the applicable downstream zones.

FEATURES

• Communicates with nLight Network

• Remotely configurable/upgradeable

• Push-button programmable

• Green LED indicators for each Port

• Redistributes bus power between ports

• Supports up to 128 devices per port nBRG 8 8-Port nLight Bridge

ORDERING INFORMATION

Catalog Number: Date: Project:

Notes:

1. Not available with 347, LT, or KIT options.

Design Select options indicated by this color background.

Buy American Act Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations.

Please refer to www.acuitybrands.com/buy-american for additional information.

Warranty Five-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

Items marked by a shaded background qualify for the Design Select program and ship in 15 days or less. To learn more about Design Select, visit www.acuitybrands.com/designselect.

*See ordering tree for details

Capable This item is an A+ capable component, which has been designed and tested to provide out-of-the-box luminaire compatibility with simple commissioning, when included as part of an A+ Certified™ Solution.

To learn more about A+, visit www.acuitybrands.com/aplus.

https://www.acuitybrands.com/buy-american https://www.acuitybrands.com/support/warranty/terms-and-conditions https://www.acuitybrands.com/designselect nBRG - TN-701

PROGRAMMING

Refer to included instructions on LED indications and push button functionality.

RED

BLK

H

PS 150

WHT

BLK/ORN

N 120 V 277 V

BLK

ORN

A 15-24 VDC or VAC power supply can deliver power to the Bridge via the terminal connections on the side of the unit.

The PS 150 version power supply (included in the KIT option) is recommended, as it conveniently mounts through a knock-out on the side of the junction box where the Bridge unit is mounted.

1. Mount power supply to a 4” x 4” square junction box (through a 1/2” knockout)

2. Connect the power supply’s class 1 line voltage wires. Cap any unused wires.

3. Mount Bridge unit to top of same junction box

4. Connect the power supply’s low voltage wires to the Bridge’s terminal connectors. Upon power up, unit’s LEDs will flash.

5. Attach CAT-5e cables from lighting zones to the appropriate Bridge RJ-45 ports according to system design. Individual port

LEDs will blink according to the following pattern:

• Rapid Flash - Port is in discovery

• 1 Blink - Healthy zone of devices

• 2 Blinks - Upstream bridge or gateway is detected

• 4 Blinks - Downstream bridge is detected

6. Fill out Bridge’s port identification sticker(s) and commissioning card

POWER TERMINAL

CONNECTION

RJ-45 PORTLEDBUTTON SCREW HOLES

Cap unused BLK/ORN wire

DETAILED DIAGRAM

INSTALLATION

WIRING (DO NOT WIRE HOT)

NETWORK CONFIGURATION

An nLight network backbone consists of one or more Bridges and a Gateway (nGWY2 CTRL & nGWY2 GFX) communicating over CAT-5e wired connections. The architecture can be topology-free, however wide branching backbone networks are recommended over linear runs. Any one or more RJ-45 ports on a Bridge may be used to connect to other Bridge or Gateway devices.

Note: A maximum of 9 bridges may be used in a row (ie: bridge jumps from the gateway to the last bridge should remain less than 9).

3 44 5 6 5 6 7

1 21 2 3

5 6 7

1 2 3 4 nGWY2 GFX

SENSORVIEW

nBRG 8 nBRG 8 nBRG 8

LAN

nGWY2 CTRL

Serial #

Commisioning Card nBRG - TN-701

Electrical Input Ratings 15-24VDC, 60mA, Class 2 (via included PS-150 or PS-150-347 power supply with KIT option) 15-24VDC, 40mA, Class 2 per port (e.g. from a connected nPP16)

Low Voltage Output Ratings 15VDC, 40mA per RJ-45 Port (90mA total with connected PS-150 or PS-150-347 power supply)

Standards/ Ratings Energy Management Equipment, UL916 (E167435)

Mechanical Dimensions 4.90H” x 4.90W”x 1.05D” (124mm x 124mm x 27mm)

Mounting Directly to 4” x 4” Square Box Surface Mount

Color White Connection Type RJ-45 nLight Network Ports (8)

Low-Voltage Terminals

Environmental Warrantied Operating Temperature Standard: 32°F to 140°F (0°C to 60°C) LT option: -4°F to 140°F (-20°C to 60°C)

Relative Humidity Up to 90%, Non-Condensing Standards/ Ratings RoHS, Plenum UL2043

General Standards/ Ratings System Component to aid in compliance with Title 24, ASHRAE 90.1, IECC

Security Complies with California Civil Code Title 1.81.26, Security of Connected Devices, approved under Senate Bill No.327 (2018)

SPECIFICATIONS