L. RELOC OnePass Splitter Splice - OSS Series (Basis of Design).pdf

PDF 690 KB Posted Sep 5, 2023

Attached to: C3 Interior LED Lighting
Solicitation number: 15F06723Q0000316
Issued by: Department of Justice Federal Bureau of Investigation Headquarters Division

About this file

Written by GovTribe AI · Dec 21, 2023

This document provides product specifications for the OnePass Splitter Splice (OSS), Switching Tee (OST), and Selector Unit (OSU) manufactured wiring system devices from Acuity Brands Reloc Wiring Solutions. The OSS connects to other OnePass system devices and splits branch circuit wiring into two directions. The OST introduces local switching and unswitched power for subsequent fixtures. The OSU provides wiring to fixtures and power devices. Key details include voltage ratings from 120V to 480V, conductor options from 12/2G to 12/4G, temperature ratings from -40C to 90C, integrated low voltage controls options, healthcare facility listings, and a five-year limited warranty.

The related federal contract opportunity is a solicitation from the Department of Justice Federal Bureau of Investigation Headquarters Division for interior LED lighting (Solicitation #15F06723Q0000316). The document provides product specifications that could meet requirements for the C3 interior lighting project.

View the file

Other files

File	Type	Posted
Questions - Answers.xlsx	XLSX spreadsheet	Sep 12, 2023
Amendment One SF30.pdf	PDF	Sep 12, 2023
K. RELOC OnePass Cables - Fixture Cable - OFC Series (Basic of Design).pdf	PDF	Sep 5, 2023
A. BLTR -1x4 Relight LED Light Fixture (Basis of Design).pdf	PDF	Sep 5, 2023
S. nLight System - Occupancy Sensor (Basis of Design).pdf	PDF	Sep 5, 2023
D. CJIS Existing Supporting Rooms Light Fixture – F3.pdf	PDF	Sep 5, 2023
23-0801_Brand Name or Equal for Solicitation.pdf	PDF	Sep 5, 2023
N. RELOC External Connector - RCAT5.pdf	PDF	Sep 5, 2023
J. RELOC OnePass Cables - Cable - OC1 Series (Basic of Design).pdf	PDF	Sep 5, 2023
T. nLight System - Wallpod On & Off Control (Basis of Design).pdf	PDF	Sep 5, 2023
C. Photometric Analysis with 2BLT2 Light Fixture (Basis of Design).pdf	PDF	Sep 5, 2023
U. nLight System - Wallpod Scene Control (Basis of Design).pdf	PDF	Sep 5, 2023
G. Support Rooms Light Fixture Drawing PDF - Please Request DWG File.pdf	PDF	Sep 5, 2023
23-0830 C3 LED LGT Control Materials List.xlsx	XLSX spreadsheet	Sep 5, 2023
M. RELOC OnePass System Drops - Drop Cable (Basis of Design).pdf	PDF	Sep 5, 2023
O. RELOC Distribution Box Primary (Basis of Design).pdf	PDF	Sep 5, 2023
E. New Support RM 48-inch LED Strip Light Fixture (Basis of Design).pdf	PDF	Sep 5, 2023
Q. nLight System - Eclypse Controller (Basis of Design).pdf	PDF	Sep 5, 2023
15F06723Q0000316 - RFQ.pdf	PDF	Sep 5, 2023
B. BLT -2x2 LED Light Fixture (Basis of Design).pdf	PDF	Sep 5, 2023
V. nLight System - Unitouch Touch Screen Wall Switch (Basis of Design).pdf	PDF	Sep 5, 2023
R. nLight System - 8-Port Bridge (Basis of Design).pdf	PDF	Sep 5, 2023
I. RELOC OnePass Convertor - OC Series (Basis of Design).pdf	PDF	Sep 5, 2023
F. Photometric Analysis of Support Rooms with Basis of Design Light Fixture.pdf	PDF	Sep 5, 2023
P. RELOC Rectangular Floor Module.pdf	PDF	Sep 5, 2023
H. RELOC RRL Universal Fixture Connector for Basis of Design.pdf	PDF	Sep 5, 2023

Show all 26

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

OSS_OSU_OST

Catalog Number

Notes Type

FEATURES & SPECIFICATIONS

INTENDED USE

The OnePass Splitter Splice (OSS), Switching Tee (OST), and the Selector Unit (OSU) are male/ female devices that can be used in multiple ways for power and lighting applications. The OSS connects to other One Pass system devices and splits the branch circuit wiring into two direc-tions. The OST is located above the primary switch locations and introduces local switching and unswitched power to be used as needed for subsequent fixtures. The OSU provides wiring to fixtures and power devices through a 1/2” trade size knockout.

ELECTRICAL

• Rated for use on 20-amp branch circuits.

• Color-coded labels for quick voltage identification.

• All conductors are 12 AWG copper with -20°C to +90°C thermoplastic insulation rated 600V.

• All components provide a fully rated No. 12 AWG grounding conductor.

• C12S option includes three 12 AWG conductors and 18 AWG shielded pair for controls wiring. (-20°C to +90°C)

• Safety-keying prevents accidental mating of components with different voltages.

SYSTEM FEATURES

• EXT option enables OSS’s to be installed in hot and cold applications (-40° to +90°C).

• Type of insulation for EXT option is based on NEC Table 310.104(A).

• Dust Cover available for unused ports: RDC3 METAL DUST COVER CSA/UL J50 (available job pack of 50 only)

• Plenum rated low voltage cable (LVC option).

CONTROLS-ENABLED WIRING OPTIONS

• 0-24V integrated single-circuit or 0-10V low voltage controls applications: select C12S option.

• 0-24V multi-circuit dimming or 0-10V low voltage controls applications: select LVC option.

LISTINGS

• C-UL-US listed for indoor, dry, and accessible locations.

• Meets or exceed all the requirements of UL183 and NEC (NFPA70) Article 604 for manufactured wiring systems

• C12S option meets NEC requirements for separation of Class 2 and Class 3 circuits from Class

1 circuits by a barrier as defined by Article 725.136(B).

• Meets NEC requirements for redundant ground paths for patient care areas in healthcare facilities. (HCF option).

BUY AMERICAN ACT

This product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations.

Please refer to www.acuitybrands.com/resources/buy-american for additional information.

WARRANTY

5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

OnePass® System Devices

OSS, OSU, OST

OSS

Splitter Splice

OSU

Circuit Selector Unit

OST

Switching Tee

Series Voltage 1 Conductors Controls Wiring Options

OSS 120 120V

208 208V 240 240V 277 277V 347 347V 480 480V

12/2G Three 12 AWG conductors, including one 12 AWG ground 2

12/3G Four 12 AWG conductors, including one 12 AWG ground

12/4G Five 12 AWG conductors, including one 12 AWG ground 3

(blank) Not required C12S Integrated CI,CII rated line voltage and signal wires 2

LVC 3 position connector system for low voltage wiring 4

2N Two circuit, two neutral 5

EXT Extreme temperature rating conductors 6

IGW Isolated ground wire 7

ORDERING INFORMATION For shortest lead times configure product using bolded options. Example: OSS 277 12/4G

Notes

1. 208, 240, 480 voltages not available with 2N option.

2. 12/2G available with C12S only.

3. 12/4G conductors are standard and should be used when options C12S and EXT are not required.

4. See spec sheet LVC for details.

5. 2N only available with 12/4G. Only available with 120, 277, 347 voltages.

6. EXT available with 12/3G only.

7. IGW available with 12/4G conductor and 120V only.

mailto:techsupportreloc%40acuitybrands.com?subject= https://reloc.acuitybrands.com/ https://www.acuitybrands.com/resources/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions http://www.acuitybrands.com/products/detail/281506/reloc/lvc/low-voltage-cable/-/media/products/reloc/281506/document/lvc_pdf.pdf

OnePass® System Devices

Series Voltage Conductors Controls Wiring Options Connector Type

OSU 120 120V

208 208V 240 240V 277 277V 347 347V 480 480V

12/4G Five 12 AWG conductors, including one 12 AWG ground

18/2G Three 18 AWG conductors, including 18 AWG ground 1

18/4G Five 18 AWG conductors, including 18 AWG ground

(blank) Not required C12S Integrated CI,CII rated line voltage and signal wires 1

(blank) Not required 2N Two circuit, two neutral 2

IGW Isolated ground wire 3

(blank) Not required RRL RELOC®-ready luminaires 4

Series Voltage Drop Type Length Controls Wiring Options

OST 120 120V

277 277V 347 347V

1LEVEL Two 12 AWG conductors, plus 12 AWG ground

2LEVEL Four 12 AWG conductors, plus 12 AWG ground

1 ft up to 50 ft (blank) Not required C12S Integrated CI,CII rated line voltage and signal wires 1

(blank) Not required N One neutral wire provided in drop HCF Meets healthcare facility requirements 2

ORDERING INFORMATION For shortest lead times configure product using bolded options.

Example: OSU 120 12/4G

Example: OST 277 1LEVEL 09

Notes

1. 18/2G available with C12S only.

2. 2N available with 12/4G & 18/4G only.

3. IGW available only with 12/4G conductor and 120V.

4. If RRL selected, fixture must have RRL and wiring instruction. See fixture spec sheet for details. See RRL spec sheet for connector details.

Notes

1. C12S available with 1LEVEL only.

2. HCF available with 2LEVEL drop type only. HCF not available with controls wiring options C12S.

mailto:techsupportreloc%40acuitybrands.com?subject= https://reloc.acuitybrands.com/ http://www.acuitybrands.com/products/detail/248102/Reloc/RRL/Reloc-Ready-Connector/-/media/products/Reloc/248102/document/RRL_pdf.pdf

OnePass® System Devices

A – 18-gauge galvanized steel cover, zinc alloyed casting B – Connector body C – Tin-plated brass contacts

DIMENSIONS

Dimensions are shown in inches (millimeters)

OSS – Splitter Splice

SYSTEM VIEW

System View designs are for illustrative purposes only.

COVER ALL UNUSED “OC2”

PORTS WITH A DUST COVER

“OD” FIXTURE WHIP

ATTACHED TO

LUMINAIRES OR

EMERGENCY UNITS

OC2 OC2 OSS

OCS

OC2 OC

2-1/4 (57.2)

4-9/16 (115.9)

5/8 (15.9)

2-1/4 (57.2)

3-3/8 (85.7)

mailto:techsupportreloc%40acuitybrands.com?subject=

OnePass® System Devices

OSU – Selector Unit

DIMENSIONS

Dimensions are shown in inches (millimeters)

A – 18-gauge, zinc-plated, CRS cover B – UL-recognized connector body C – Tin-plated, brass contacts D – .015” spring steel latches E – No. 12 AWG and 18 AWG copper wires with 600V, 90°C thermoplastic insulation

SYSTEM VIEW

System View designs are for illustrative purposes only.

4-5/8 (117.5)

2-3/16 (55.6)

1-7/16 (36.5)

9/16 (14.3)

1-1/16 (27.0)

D E

OC1

OSU

mailto:techsupportreloc%40acuitybrands.com?subject=

OnePass® System Devices

OST

OC1

OST

OC1

OFC

SYSTEM VIEW

System View designs are for illustrative purposes only.

DIMENSIONS

Dimensions are shown in inches (millimeters)

A – UL recognized connector body B – Tin-plated brass contacts C – No. 12 AWG wire rated at 600V, 90°C D – Die-cast zinc with zinc-plated CRS cover E – FMC standard. HCF MC and C12S MC optional

NOTES

• Rated for 20-amp capacity.

4-9/16 (115.9)

2-1/4 (57.2)

3-3/8 (85.7)

5/8 (15.9)

B C

OST – Switching Tee mailto:techsupportreloc%40acuitybrands.com?subject= https://reloc.acuitybrands.com/

Catalog Number 3:

Page 1:

Notes 3:

Page 1:

Type 3:

Page 1:

Text Field 10:

Text Field 11:

Text Field 12:

Text Field 13:

Text Field 14:

Text Field 15:

Text Field 16:

Text Field 17:

Text Field 18:

Text Field 19:

Text Field 20:

Text Field 21:

Text Field 22:

Text Field 23:

Text Field 24:

Text Field 25:

Text Field 26:

File details come from the government source that posted it. Updated Sep 5, 2023.