Supplement A1-TDP Option Selection Worksheet.pdf
PDF 176 KB Posted
- Attached to
- Navy Electronic Chart Display and Information System (ECDIS) Hardware and Software Production
- Solicitation number
- N00025-26-R-5246
About this file
This is a Technical Data Package (TDP) Option Selection Worksheet for the Navy Electronic Charting Display Information System (ECDIS) AN/SYN-1 Hardware Set under contract N00024-25-R-5246, dated 24 October 2025. The worksheet applies to Contract Line Item Numbers (CLINs) 0010, 1010, 2010, 3010, and 4010, with CDRL Data Item Number A025.
The contractor must deliver technical data at the production level, including 2D and 3D drawings in native CAD and ISO 32000 PDF formats, 3D digital models with associated 2D drawings organized per Appendix B, and 3D PDF files. Associated lists are required in native format and ISO 32000 PDF, including parts lists (separate format), data lists, index lists, and wiring lists at all assembly levels. The contractor will use government CAGE code 53711 with document numbers to be assigned by PEO IWS 6.0. Deliverables must include conceptual and developmental design drawings/models, product drawings/models, Special Inspection Equipment (SIE) drawings/models, Prime Item Development Specification (PIDS), firmware software documentation, and supplemental technical data. Supplemental requirements specify PTC PLM format compatibility with Model Based Product Support System and comprehensive firmware documentation including source code, design documents, build/make/loading files, compilers, installation instructions, test procedures, and hardware troubleshooting tools and procedures for both development and production. Engineering standards ASME Y14.100 (with Appendices B, C, D, E), ASME Y14.34, ASME Y14.5, and company standards are applicable. TDP data management products required include Source Control Drawing (SOCD) approval requests, Drawing Number Assignment Reports, and Proposed Critical Manufacturing Process Descriptions.
View the file
Other files
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TDP OPTION SELECTION WORKSHEET
SYSTEM: NAVY ELECTRONIC CHARTING DISPLAY
INFORMATION SYSTEM (ECDIS) AN/SYN-1 HARDWARE SET
DATE PREPARED: 24OCT2025
A. CONTRACT NO.
N00024-25-R-5246
B. EXHIBIT / ATTACHMENT
NO.
A
A. CLIN
0010,1010,2010,3010,4010
B. CDRL DATA ITEM
NO(S)
A025
1. TDP LIFECYCLE LEVEL (CHOOSE ONLY ONE PER WORKSHEET) Note: The level selected must coincide with the requirements of the elements selected in Block 5.
A. ☐CONCEPTUAL LEVEL
☐DEVELOPMENTAL LEVEL
☒PRODUCTION LEVEL
B. REMARKS:
2. DELIVERABLE DATA PRODUCTS (X ALL THAT APPLY AND COMPLETE AS APPLICABLE)
TYPE FORMAT
A. ☒2D DRAWINGS
☒ NATIVE CAD ☒ ISO 32000 PDF ☐ HARD COPY
☐ OTHER FORMAT (SPECIFY) ______________________________________
B. 3D DRAWINGS
☐3D Digital MODELS ONLY
☒3D Digital MODELS W/
ASSOCIATED 2D DRAWINGS
☒ NATIVE CAD (Specify level of annotation) ______________________________
☒ MODEL ORGANIZATION SCHEMA (Specify Appendix B or other) APPENDIX B
☐ NEUTRAL FORMAT (SPECIFY, e.g., ISO 10303 APxxx) __________________
☒ OTHER FORMAT (SPECIFY, e.g., 3D PDF, JT) 3D PDF
C. ☐METADATA
(Specify in Section 9)
☐ ASCII TEXT- PIPE DELIMITED ☐ ISO 10303 (SPECIFY, e.g., APxxx & DEX)
☐ JEDMICS (DLF) ☐ OTHER FORMAT (SPECIFY) ____________________
D. ☒ASSOCIATED
LISTS (See Sect 7)
☒ NATIVE FORMAT ☒ ISO 32000 PDF ☐ HARD COPY
☐ OTHER FORMAT (SPECIFY) ______________________________________
E. SUPPLIMENTAL
☒ TECHNICAL DATA
(Specify in Section 9)
NATIVE __________________________________________
NEUTRAL (SPECIFY, e.g., STEP AP 238, 240 DEX, Other) __________________
OTHER (SPECIFY, e.g., PDF) SEE BLK 9 _
3. CAGE CODE & DOCUMENT
NUMBERS A. ☐CONTRACTOR CAGE CODE & DOCUMENT NUMBERS
☒GOVERNMENT CAGE (COMPLETE 3B, 3C AND 3D)
B. USE CAGE CODE:
53711
C. USE DOCUMENT NUMBERS:
To Be Assigned
D. TO BE ASSIGNED
BY:
PEO IWS 6.0
4. DRAWING FORMATS (X ONE AND COMPLETE AS APPLICABLE)
☒ CONTRACTOR FORMAT ☐ GOVERNMENT FORMAT
REMARKS:_______________________________________________________________________________________
5. TDP ELEMENTS AND ASSOCIATED DATA REQUIRED (X ALL THAT APPLY)
☒ CONCEPTUAL DESIGN DRAWINGS / MODELS
☒ DEVELOPMENTAL DESIGN DRAWINGS / MODELS AND ASSOCIATED LISTS
☒ PRODUCT DRAWINGS / MODELS AND ASSOCIATED LISTS
☒ SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS, MODELS AND ASSOCIATED LISTS
☒ SPECIFICATIONS AND/OR STANDARDS (SPECIFY) PRIME ITEM DEVELOPMENT SPECIFICATION (PIDS) _
☒ SOFTWARE DOCUMENTATION (SPECIFY) FIRMWARE (IF EXCLUDED FROM PIDS) _
☐ QUALITY ASSURANCE PROVISIONS (QAP) (SPECIFY) _______________________________________________
☐ METADATA (SPECIFY) __________________________________________________________________________
☒ SUPPLEMENTAL TECHNICAL DATA (SPECIFY) SEE BLK 9 _
6. TDP DATA MANAGEMENT PRODUCTS
☒ SOURCE CONTROL DRAWING (SOCD) APPROVAL REQUEST
☒ DRAWING NUMBER ASSIGNMENT REPORT
☒ PROPOSED CRITICAL MANUFACTURING PROCESS DESCRIPTION
7. ASSOCIATED LISTS (X AND COMPLETE AS APPLICABLE)
A. PARTS LISTS (X ONE)
☐ (1) INTEGRAL ☒ (2)
SEPARATE
☐ (3) CONTRACTOR SELECT
B. DATA LISTS ☒ REQUIRED (Specify Levels of Assy) ALL LEVELS _
C. INDEX LISTS ☒ REQUIRED (Specify Levels of Assy) ALL LEVELS _
D. WIRING LISTS ☒ REQUIRED (Specify Levels of Assy) ALL LEVELS _
E. APPLICATION LISTS
☐ (1) INTEGRAL ☒ (2)
SEPARATE
☐ (3) CONTRACTOR SELECT
F. OTHER ☐ REQUIRED (Specify) ___________________________________________________
8. APPLICABILITY OF STANDARDS. THE FOLLOWING STANDARDS APPLY (X AS APPLICABLE)
☒ ASME Y14.100
ENGINEERING DRAWING
PRACTICES
WITH APPENDICES:
☒ B ☒ C ☒ D ☒ E
☐ ASME Y14.24 TYPES AND APPLICATIONS OF
ENGINEERING DRAWINGS
☒ ASME Y14.34 ASSOCIATED LIST
☐ ASME Y14.35M REVISION OF ENGINEERING DRAWINGS
AND ASSOCIATED LIST
☐ ASME Y14.41 DIGITAL PRODUCT DEFINITION DATA
PRACTICES
☒ ASME Y14.5 DIMENSIONING AND TOLERANCING
☐ OTHER STANDARDS
APPLY AS DESCRIBED:
COMPANY STANDARDS
PERMITTED
☒ YES ☐ NO
9. OTHER TAILORING (ATTACH ADDITIONAL SHEETS AS NECESSARY)
2E: PTC PLM FORMAT COMPATIBLE WITH MODEL BASED PRODUCT SUPPORT SYSTEM
2E/5: FIRMWARE SOFTWARE SOURCE/DESIGN DOCS/BUILD/MAKE/LOADING FILES/COMPILERS
NATIVE FILES/SOURCE/VHDL/TROUBLESHOOTING PROCEDURES, INSTALLATION INSTRUCTIONS/PROCEDURES, TEST PROCEDURES, LOADING PROCEDURES, AND HARDWARE TROUBLESHOOTING TOOLS AND PROCEDURES
FOR DEVELOPMENT AND PRODUCTION
3D: DOCUMENT NUMBERS TO BE ASSIGNED BY THE CONTRACTOR SEQUENTIALLY BASED ON THE APPROVED
DOCUMENT NUMBERS LISTED IN 3C
File details come from the government source that posted it. Updated .