SEAM Sec L - L_32_1 Relevant Past Performance Matrix.xlsx
XLSX spreadsheet 42 KB Posted
- Solicitation number
- 80JSC020R0045
View the file
Other files
Show all 26
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Task Cat A
| Task Category A (SOW Section 4.0) | |||
| Critical Capabilities | Capability | Contractor Name | Past Performance Evidence |
(Max of 3 Tasks per critical capability, Max of 10 Contracts for Task Category A)
| CONTRACT NAME | TASK TITLE | NARRATIVE REFERENCE | |||
| Example Capability | Prime | XYZ Corporation | Contract A | XYZ | pg. 1 |
| Contract B | ABC | pg. 1 | |||
| Contract B | PQR | pg. 2 | |||
| Aircraft and Aircraft Systems flight Testing and Support, specifically: | |||||
| Loads determination |
Detailed stress analysis
Detailed dynamic analysis
Fatigue analysis
Random, sine, and shock analysis
Aeroelastic analysis
Damage tolerence assessment (DTA)
| Computational Fluid Dynamics, specifically: |
| Flow simulation, visualization and loads |
| Testing Services |
| Stress/Strain testing of mechanical of |
electrical systems/components
Vibration testing
Task Cat B
| Task Category B (SOW Section 5.0) | |||
| Critical Capabilities | Capability | Contractor Name | Past Performance Evidence |
(Max of 3 Tasks per critical capability, Max of 10 Contracts for Task Category B)
| CONTRACT NAME | TASK TITLE | NARRATIVE REFERENCE | |||
| Example Capability | Prime | XYZ Corporation | Contract A | XYZ | pg. 1 |
| Contract B | ABC | pg. 1 | |||
| Contract B | PQR | pg. 2 | |||
| System and component obsolescence | Prime |
| Sustainment, alteration and improvement of aircraft mechanical systems, specifically of: |
| Landing gear, tires, wheels, brakes, |
anti-skid
Fuel systems
Hydraulics
Air Conditioning and pressurization
Pneumatics
Flight controls
| Structural and Dynamic Analysis, specifically: |
| Loads Determination |
Detailed Stress Analysis
Damage tolerance assessment (DTA)
Instructions for continued airworthiness
Task Cat C
| Task Category C (SOW Section 6.0) | |||
| Critical Capabilities | Capability | Contractor Name | Past Performance Evidence |
(Max of 3 Tasks per critical capability, Max of 10 Contracts for Task Category C)
| CONTRACT NAME | TASK TITLE | NARRATIVE REFERENCE | |||
| Example Capability | Prime | XYZ Corporation | Contract A | XYZ | pg. 1 |
| Contract B | ABC | pg. 1 | |||
| Contract B | PQR | pg. 2 | |||
| Avionics integration |
Line Replaceable Unit (LRU) design and integration
Circuit design
Wire harness design
Payload electrical interface design
Software design and integration
System and component obsolescence
Instructions for continued airworthiness
Electrical Loads Analysis
Electromagnetic Interference (EMI) or Radio Frequency Interference (RFI) analysis
Troubleshooting using schematics and diagnostic equipment
Task Cat D
| Task Category D (SOW Section 7.0) | |||
| Critical Capabilities | Capability | Contractor Name | Past Performance Evidence |
(Max of 3 Tasks per critical capability, Max of 10 Contracts for Task Category D)
| CONTRACT NAME | TASK TITLE | NARRATIVE REFERENCE | |||
| Example Capability | Prime | XYZ Corporation | Contract A | XYZ | pg. 1 |
| Contract B | ABC | pg. 1 | |||
| Contract B | PQR | pg. 2 | |||
| Design modeling and drawing creation using CREO Parametric and AutoCAD software |
Engineering analysis and support for mockup Center of Gravity, Center of Buoyancy, Net Buoyancy loads determination and Tip Over Analysis
Stress analysis and report generation
Hydraulic and Electro-Hydraulic systems design and integration for motion control systems
Electrical systems design and integration
Structural design including welded structures
Mechanical system design
Software design and integration
Lighting Systems design, test and integration
Reverse engineering
Manufacturing and Fabrication
PullDown
| Capability Statement |
| Prime |
| Sub |
File details come from the government source that posted it. Updated .