S-7 Fire and Safety Plan Checklist.pdf

Para. Description Provided (Y/N/Partial)

7.1 Contractors Tech Proposals included with Tech Eval

7.1.1 Written Fire and Safety Plan to include the following:

7.1.1.a Contractor's written policy that details S/Y responsibility as detailed in 29 CFR 1915.502(.:i) (b)

7.1.1.b Contractor's written policy that details S/Y responsibility as detailed in 1915.S0S(b)(2) which details the following:

7.1.1.b.i Types of fire incidents the S/Y will respond to

7.1.1.b.ii Detail liaison between S/Y and fire department

7.1.1.b.iii Fire Plan that includes the following: -------- 7.1.1.b.iii(a) How S/Y is going to acquire fire department

7.1.1.b.iii(b) S/Y to apprise fire department of S/Y operation(s)

7.1.1.b.iii(c) S/Y fire dept connection is compatible with fire department

7.1.1.b.iii(d) S/Y not permitted to use incompatible hose connections

7.1.1.c Contractors' facility for protection from fire and flooding

7.1.1.d Agreement with local municipal response organization

7.1.1.e FF Response Plan

7.1.1.f Flooding response plan

7.1.1.g Rescue response plan

7.1.1.h Medical emergency response plan

7.1.1.i Dewatering equipment available

7.1.1.j Alternate FF provisions provided in case of disable fixed systems

7.1.1.k Preventative measures against fire and flooding

7.1.1.l Measures to account for personnel in the event of an emergency; crew muster locations

7.1.1.m Name and numbers of contact personnel for emergency

7.1.1.n Mitigation actions for disable fixed FF system(s)

7.1.1.o POC for conducting daily joint safety inspection walkthrough (Linked to Para. 7.16)

7.1.1.p Incident Command location

7.1.1.q Hot Work procedures

7.1.1.r Available facility and pier FF riser sizes, pressure and flow rates

7.1.1.s Available plan to stop the spread of the fire and smoke; compartment closure plan and quick disconnect fittings plan

7.1.1.t Planned access cuts

7.1.2 Fire and Safety Plan must address the following: -------- 7.1.2.a Fire Control Plan that details ingress and egress routes and Firefighting{FF) appliances; also FCP is to be posted in Machinery Space ingress/egress and gangway

7.1.2.b Weather the Ships firemain can be pressurized or used due to work detailed in this work package {Linked to Para. 7.8)

7.1.2.c Stow Temp FF appliances where not to create blockage

7.2 Temporary portable fire extinguishers {PFEs) being

provided by the S/Y in the PFE Table.

7.3 Weather the Fixed Gaseous Fire Suppression System

was going to be disable or remain enabled was not detailed.

Also if disabled the S/Y providing an ABS External Specialist to disable system. {Linked to Para. 7.4.7)

7.4 The following actions that the S/Y must take prior to

disabling the disabling Fixed Fire Suppression Systems

7.4.1 Providing adequate temporary FF appliances before

work

7.4.2 Disabled system{s) will be locked out

7.4.3 Bilges cleaned and will remain free of oil

7.4.4 Minimize oil movement

7.4.5 Ensure doors and scuttles remain accessible for escape

7.4.6 When being worked on CO2 doors must remain open

7.4.7 ABS approved vendors will disable Fixed Fire

Suppression Systems{Linked to Para. 7.3)

7.4.7.a Post placards detailing Fixed Fire Suppression disabled as entrance doors leading to protected space and gangway

7.5 Safety or fi re training prevention training that was to

occur upon arrival was:

7.5.1 Shipyard Safety Awareness Training (SSAT)

7.5.2 Conducting FF and fi re prevention training

7.5.3 Quick disconnect fitting training

7.5.4 Training on what to do when discovering a fire

7.6 - 7.6.7 S/Y provided temporary FF manifolds or any specifics of said FF manifolds

7.7 - 7.7.5 S/Y tie into the ships Fire ma in

7.8 Contractor’s proposal detailing if any part of the Ships

firemain was going to be disabled; and if so what temporary FF manifolds are to be provided (Linked to Para. 7.1.2.b)

7.9 - 7.9.4 5/Y Fire Watch and Hot Work Policy was not provided. (Linked to Para. 7.1.1.q)

7.10 Hot Work Chit procedure

7.11 After a fi re notify OMT immediately, prelim report at

24 hours, final at 5 days

7.12 S/Y communication plan

7.13 S/Y use of flammable gas cylinders stowage and usage

onboard

7.15 - 7.15.3 Quick disconnect fitting plan and securing during an actual fire

7.16 - 7.16.2.i S/Y inspection plan with S/Y Rep and OMT/Ships Force