ESSCA_RFP_Section_E.docx

NNM16568754R SECTION E

Part I – The Schedule

SECTION E

Inspection and Acceptance

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

1852.246-71 GOVERNMENT CONTRACT QUALITY ASSURANCE FUNCTIONS (OCT 1988)

1852.246-72 MATERIAL INSPECTION AND RECEIVING REPORT (APR 2015)

Section E - Inspection and Acceptance

52.252-2 Clauses Incorporated by Reference (FEB 1998)

(End of clause)

52.246-11 Higher-Level Contract Quality Requirement (DEC 2014)

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

Marshall Quality Management System Policy-Marshall Policy Directive (MPD) 1280.1

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require:

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

1852.246-71 Government Contract quality Assurance Functions (OCT 1988) In accordance with the inspection clause of this contract, the Government intends to perform the following functions at the locations indicated:

(End of clause)

1852.246-72 Material Inspection and Receiving Report (APR 2015)

(a) At the time of each delivery to the Government under this contract, the Contractor shall prepare and furnish a Material Inspection and Receiving Report (Department of Defense (DD) Form 250 series). The forms shall be prepared and distributed as follows: three (3) copies, to include an original and two (2) reproductions.

(b) The Contractor shall prepare the DD Form 250 in accordance with NASA FAR Supplement 1846.6. The Contractor shall enclose the copies of the DD Form 250 in the package or seal them in a waterproof envelope, which shall be securely attached to the exterior of the package in the most protected location.

(c) When more than one package is involved in a shipment, the Contractor shall list on the DD Form 250, as additional information, the quantity of packages and the package numbers. The Contractor shall forward the DD Form 250 with the lowest numbered package of the shipment and print the words "CONTAINS DD FORM 250" on the package.

(End of clause)

[END OF SECTION]

E-1