Final_Amendment__2.pdf

OMB APPROVAL #: 2700-0042

AMENDMENT OF SOLICITATION/ 1. CONTRACT ID CODE PAGE OF

PAGES MODIFICATION OF CONTRACT 1 4

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

Amendment Two (2) See Block 16C N/A

6. ISSUED BY CODE 210.S 7. ADMINISTERED BY (If other than Item 6) CODE 210.S National Aeronautics and Space Administration Goddard Space Flight Center Space Sciences Procurement Office Greenbelt, MD 20771

Julie Janus

(301) 286-4931

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State, and Zip Code)

TO ALL OFFERORS

CODE FACILITY CODE

(x) 9A. AMENDMENT OF SOLICITATION NO. 9B. DATED (SEE ITEM 11)

X NNG16549116R June 28, 2016

10A. MODIFICATION OF CONTRACT/ORDER NO. 10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, X Is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning Copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offor

Submitted; or © By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO

BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF

YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram

Or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

N/A

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.(x)

(x) A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

d. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor Is not, Is required to sign this document and return copies to the issuing office.

14. description of amendment/modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

This amendment provides for revisions to several provisions to the Request for Proposal (RFP)

NNG16549116R for the Omnibus Multidiscipline Engineering Services (OMES) II.

Accordingly, All other terms and conditions remain unchanged.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Julie Janus, Contracting Officer

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY /Original Signed By:/ July 19, 2016

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NNG16549116R

Amendment Number 2

A. Revise L.13, GSFC 52.215-210 MISSION SUITABILITY VOLUME INSTRUCTIONS

(COMPETITIVE) (FEB 2016), under Section (c) Mission Suitability Instructions by Subfactor, Subfactor B, Management Approach, 7th paragraph as follows:

FROM:

Offerors shall provide written position qualifications for the specific labor categories envisioned for this requirement. Per the directions in the Cost Volume Instruction provision, the offeror’s Position Qualifications are to be included in the contract Attachment entitled, “Direct Labor Rates, Indirect Rates, and Fee Matrices,” which shall be submitted in the Cost Volume per GSFC 52.215-201 table (b)(1). Offerors need to address the minimum requirements in the position qualifications, to include the necessary experience, summary of duties and responsibilities, specific requirements/licensing, minimum education and minimum experience required for the position. If proposing incumbent labor, the offeror shall use the position descriptions shown in Enclosure

CC for non-managerial labor categories. For non-incumbent non-managerial labor proposed, provide a matrix that cross-references the offeror-developed Position Qualifications with the Government provided labor Position descriptions. All position qualifications will be incorporated into the resultant contract as Attachment B.

TO:

Offerors shall provide written position qualifications for the specific labor categories envisioned for this requirement. Per the directions in the Cost Volume Instruction provision, the offeror’s Position Qualifications are to be included in the contract Attachment entitled, “Direct Labor Rates, Indirect Rates, and Fee Matrices,” which shall be submitted in the Cost Volume per GSFC 52.215-201 table (b)(1). Offerors need to address the minimum requirements in the position qualifications, to include the necessary experience, summary of duties and responsibilities, specific requirements/licensing, minimum education and minimum experience required for the position. All position qualifications will be incorporated into the resultant contract as Attachment B.

B. Revise L.10 GSFC 52.215-201 PROPOSAL PREPARATION—GENERAL INSTRUCTIONS (APR

2016), Section (b) PROPOSAL CONTENT AND PAGE LIMITATIONS, as follows:

(1) The following table contains the page limitations for each portion of the proposal submitted in response to this solicitation. Additional instructions for each component of the proposal are located in the solicitation provision noted under the Reference heading.

Proposal Component Volume Reference Page

Limitations

Offer Volume I L.11 None

Mission Suitability Volume II L.13 100 Pages*

Quality Assurance Plan (QAP) 75 Pages

Cover Page, Indices, RFP Compliance

Matrix, Total Compensation Plan, Phase-in

Plan, and Small Business Utilization Subfactor

Excluded

Cost Volume III L.14 Mixed

(a) Direct Labor Rates, Indirect Rates, and Fee

Matrices (Attachment B)

None

(b) Cost Exhibits accompanying Direct and

Indirect Rate Substantiation

None

(c) Basis of Estimates 35 Pages ***

Past Performance Volume IV L.15 Mixed

(a) Information from the Offeror 25 Pages**

(b) Cover Page, Indices, List of those sent Past

Performance Questionnaires, Small Business

Subcontracting Plan History, Customer

Evaluations, Termination/Descope information, and List of Acronyms

Excluded

*Excludes QAP

**Prime Offeror individually and each Significant Subcontractor individually.

***Prime Offeror and all Significant Subcontractors (page limitation is for the total component (Prime and Significant Subcontractors)).

C. Revise L.14, GSFC 52.215-223 COST VOLUME INSTRUCTIONS (MAR 2016), Section (b) Cost

Volume Proposal Format, paragraph 7, as follows:

FROM:

In Attachment B, the Prime Offeror shall propose, by Contract Year, unburdened direct labor rates for all labor categories in Section 1; all rates or factors for Cost Estimating Relationships in Section 2; and all individual bid indirect rates in Section 3, clearly delineating Onsite, Offsite, and Manufacturing Site rates. Onsite is defined as

NASA Goddard Space Flight Center. Offsite is defined as the Contractor’s facility. The Offeror’s fee percentage(s) included in Section 4 of the matrices shall be used to calculate the fixed fee for performing all task orders issued under the resultant contract. In Section 5, the Prime Offeror shall include a fully-loaded direct labor rate matrices for each Significant Subcontractor. In Section 6, provide Position Qualifications (PQs) for all Prime Offeror proposed direct labor categories specified in Section 1 and all significant subcontractors’ proposed direct labor categories specified in Section 5. Please note these are Prime and Significant

Subcontractor company-specific PQs – not the Government Non-Management DL Position Descriptions provided for the Government Pricing Model (GPM) purposes only.

TO:

In Attachment B, the Prime Offeror shall propose, by Contract Year, unburdened direct labor rates for all labor categories in Section 1; all rates or factors for Cost Estimating Relationships in Section 2; and all individual bid indirect rates in Section 3, clearly delineating Onsite, Offsite, and Manufacturing Site rates. Onsite is defined as

NASA Goddard Space Flight Center. Offsite is defined as the Contractor’s facility. The Offeror’s fee percentage(s) included in Section 4 of the matrices shall be used to calculate the fixed fee for performing all task orders issued under the resultant contract. In Section 5, the Prime Offeror shall include a fully-loaded direct labor rate matrices for each Significant Subcontractor. In Section 6, provide Position Qualifications (PQs) for all Prime Offeror proposed direct labor categories specified in Section 1 and all significant subcontractors’ proposed direct labor categories specified in Section 5. Please note the Prime and Significant Subcontractor(s) are to insert company-specific PQs in Section 6. These should not be the GPM-Specified Non-Management DL

Category Position Descriptions that are provided for GPM conversion and evaluation purposes only, if the

Offeror is proposing to utilize its existing company-specific labor category titles and PQs. However, the Prime and/or Significant Subcontractor(s) may propose direct labor category titles and PQs that match the GPM-

Specified direct labor category titles and position descriptions if the Offeror is establishing new, identical direct labor category titles and PQs within their company for this contract effort (versus utilizing its existing company-specific PQs and converting/mapping those positions to match the GPM-Specified Direct Labor Categories). In either case, a PQ must be provided in Section 6 for every direct labor category listed in Sections 1 and 5.

D. All other terms and conditions are unchanged.

-- END OF AMENDMENT TWO (2) --