The file's text, extracted by GovTribe without its formatting.
DRAFT Request for Proposals 06 of 18 – DRFP Att J.1-C Applicable Documents List
NNC16ZMX004R
ATTACHMENT J.1-C
APPLICABLE DOCUMENTS LIST
1.
APPLICABLE DOCUMENTS
In addition to the regulations and procedures identified elsewhere in this contract, the Contractor shall comply with the following regulations and procedures to the extent that they are employed in the Statement of Work (SOW) or Data Requirements Documents (DRDs). Applicable document versions that are in effect at RFP release constitute the requirements for this contract. After contract award, the Contractor may request use of alternate applicable documents instead of the ones specified in this list, provided the change is in the best interests of the Government. NASA approval is required for a change in applicable documents after review of the contractor’s rationale. A request for a change in applicable documents will be documented in a contract letter. NASA approval or disapproval will also be documented in a contract letter. Since NASA cannot fully define all engineering and workmanship standards based on program and requirement maturity at this time, the contractor shall define recommended additional standards to apply to Level 4 specifications. The contractor shall identify these additional standards to NASA for approval via contract letter and make these standards available to NASA for review. NASA approval or disapproval will also be documented in a contract letter.
DRAFT Request for Proposals 06 of 19 – DRFP Att J.1-C Applicable Documents List
NNC16ZMX004R
DRAFT Request for Proposals 06 of 19 – DRFP Att J.1-C Applicable Documents List
Applicable Documents List
References
| ID |
| Title |
| DRD/Section |
| SOW |
| SBU/ITAR |
| SLS-RQMT-014 |
| SLS Program Safety and Mission Assurance (S&MA) Requirements |
| 018, 032, 037, 038, 040 |
| 3.0, 3.1, 3.2, 3.3, 3.4 |
| SLS-RQMT-016 |
| SLS Program FMEA/CIL Requirements Document |
| 037 |
| 3.3 |
| SLS-RQMT-040 |
| SLS Electromagnetic Environmental Effects (E3) Requirements (Control plan) |
| 042 |
| 3.4 |
| SLS-SPIO-PLAN-008 |
| SPIO Safety and Mission Assurance Plan |
| 007, 032, 040 |
| 3.1 |
| SLS-SPIE-PLAN-032 |
| SLS-SPIE Configuration Management Plan |
| 007 |
| 1.1.6 |
| SLS-SPIO-RPT-014 |
| SPIO ISPE Risk Assessment Report |
3.0
| SLS-SPIE-RQMT-027 |
| SLS-SPIE Universal Stage Adapter (USA) Requirements Document |
| SLS-SPIE-RQMT-028 |
| SPIE Block 1B Payload Attach Fitting (PAF) Technical Requirements Document |
| SLS-SPIE-SPEC-009 |
| SPIE Integrated Spacecraft & Payload Element (ISPE) Block 1B Design Environments Document |
| 4.0, 5.0, 6.0, 7.0 |
| SBU/ITAR |
| SLS-ICD-029-02 |
| SLSP Stages to Integrated Spacecraft and Payload Element (ISPE) Interface Control Document (ICD), Volume 2: Block 1B Functional Interface Definition and Detailed Design |
| CEV-T-029800 |
| Orion-MPCV Program-to-Space Launch System Program Hardware Interface Document Control (ICD) |
| SLS-ICD-029 |
| Space Launch System Program (SLSP) Stages to Integrated Spacecraft and Payload Element (ISPE) Interface Control Document |
| SLS-ICD-052-07 |
| Space Launch System (SLSP)-to-Ground Systems Development and Operations Program (GSDOP) Interface Control Document (ICD), Volume 7: Functional Interface Definition & SLSP Block 1B Integrated vehicle to-GSDOP Detailed Design |
| SLS-ICD-052-08 |
| Space Launch System (SLSP)-to-Ground Systems Development and Operations Program (GSDOP) Interface Control Document (ICD), Volume 8: SLS Block 1B Integrated Spacecraft & Payload Element (ISPE) to GSDOP Detailed Design |
| MPCV-70026 |
| Multi-Purpose Crew Vehicle (MPCV) Program Orion-to-Space Launch System (SLS) Program Interface Requirements Document (IRD) |
| NASA-STD-6008 |
| NASA Fastener Procurement, Receiving Inspection, and Storage Practices for Spaceflight Hardware |
| 030 |
| 2.7 |
| NASA-STD-6016 |
| Standard Materials and Processes Requirements for Spacecraft |
| 027, 028, 029, 030, 047 |
| 2.7 |
| NPD 8720.1B |
| NASA Reliability and Maintainability (R&M) Program Policy |
3.3
| NPR 8715.3 |
| NASA General Safety Program Requirements |
| 035 |
| 3.2 |
| MSFC-STD-3394 |
| Standard for Contractor Configuration Management for MSFC Programs/Projects |
| 007 |
| 1.1.6 |
| SLS-PLAN-013 |
| Space Launch System (SLS) Program Safety and Mission Assurance Plan |
| 032 |
| SLS-PLAN-062 |
| Cross-Program Integrated Vehicle Loads Control Plan |
| 048 |
| SLS-SPEC-048 |
| Space Launch System (SLS) Integrated Vehicle Coordinate Systems |
| 049 |
SBU/ITAR
| SLS-STD-038 |
| SLSP Design Model Standard |
| 048, 049, 051, 052, 054, 055, 057 |
| SLS-RQMT-014 |
| Space Launch System (SLS) Program Safety and Mission Assurance (S&MA) Requirements |
| 018 |
| SLS-RQMT-015 |
| Space Launch System Program Hazard Analysis Requirements |
| 033 |
| SLS-SPIO-PLAN-001 |
| Space Launch System (SLS) Spacecraft/Payload Integration & Evolution Office (SPIE) Element Plan |
| 009 |
| SLS-SPIO-PLAN-007 |
| SPIO Materials and Processes Selection, Implementation, and Control Plan |
| 028, 029 |
| SLS-SPIO-PLAN-017 |
| SPIO ISPE Fracture Control Plan |
| 050 |
| SLS-SPIO-PLAN-018 |
| SLS SPIO Non-Destructive Evaluation Plan |
| 050 |
| SLS-SPIE-PLAN-044 |
| SPIE ISPE Block 1B Verification and Validation Plan |
| 017 |
| SLS-SPIE-RQMT-026 |
| ISPE Requirements Document (ISPERD) Block 1B |
| 013 |
SBU/ITAR
| GSDO-RQMT-1080 |
| Cross Program Contamination Requirements Document |
| 033 |
| MPR 8715.1 |
| Marshall Safety, Health, and Environmental (SHE) Program |
| 034, 036 |
| MWI 1280.5 |
| MSFC Alert Processing |
| 031 |
| MWI 8621.1 |
| Mishap and Close Call Reporting and Investigation Program |
| 034, 036 |
| MWI 8715.13 |
| Safety Concerns Reporting System (SCRS) |
| 034, 036 |
| NFS 1852.234-1 |
| Notice of Earned Value Management System |
| 003 |
| NFS 1852.234-2 |
| Earned Value Management System |
| 003 |
| NPR 6000.1H |
| Requirements for Packaging, Handling, and Transportation for Aeronautical and Space Systems, Equipment, and Associated Components |
| 059 |
| NPR 7120.5 |
| NASA Space Flight Program & Project Management Requirements |
| 002, 010, 022 |
| NPR 8621.1C |
| NASA Procedural Requirements for Mishap and Close Call Reporting, Investigating, and Recordkeeping |
| 034 |
| NPR 8735.1 |
| Procedures for Exchanging Parts, Materials, and Safety Problem Data Utilizing the Government-Industry Data Exchange Program and NASA Advisories |
| 031 |
| NPR 9501.2 |
| NASA Contractor Financial Management Reporting |
| 004 |
| NPD 7500.1D |
| Program and Project Life-Cycle Logistics Support Policy |
| 059 |
| NAS 410 |
| NAS Certification & Qualification of Nondestructive Test Personnel |
| 047 |
| NASA-STD-(I)-0007 |
| NASA Computer-Aided Design Interoperability |
| 049 |
| NASA-STD-5001B |
| Structural Design and Test Factors of Safety for Space Flight Hardware |
| 015 |
| NASA-STD-5002 |
| Load Analyses of Spacecraft and Payloads |
| 015, 046, 048, 051, 055, 056 |
| NASA-STD-5005B |
| NASA Standard for Ground Support Equipment |
| 057 |
| NASA-STD-5009 |
| Nondestructive Evaluation Requirements for Fracture-Critical Metallic Components |
| 047, 050 |
| NASA-STD-5019A |
| Fracture Control Requirements for Spaceflight Hardware |
| 050 |
| NASA-STD-7001 |
| Payload Vibroacoustic Test Criteria |
| 015, 053 |
| NASA-STD-7002A |
| Payload Test Requirements |
| 015 |
| NASA-STD-8719.9 |
| NASA Standard for Lifting Devices and Equipment |
| 026, 046, 056, 057 |
| MSFC-STD-3029 |
| Guidelines for the Selection of Metallic Materials for Stress Corrosion Cracking Resistance in Sodium Chloride Environments |
| 028 |
| MSFC-SPEC-3635 |
| Pyrotechnic System Specification |
| 055 |
| MSFC-STD-3676 |
| Development of Vibroacoustic and Shock Design and Test Criteria |
| 049 |
| MSFC-HDBK-3644 |
| Design Product Packages for Launch Vehicle Integration Handbook |
| 049 |
| NASA-HDBK-7005 |
| Dynamic Environmental Criteria |
| 048, 053 |
| ANSI/EIA-748 |
| Earned Value Management Systems |
| 003 |
| ANSI Y14.41 |
| Product Definition Data Set Practices - Digital |
| 008, 049 |
| ASME Y14.5M |
| Dimensioning and Tolerancing |
| 008 |
| ASME Y14.100 |
| Engineering Drawing Practices |
| 008 |
| DI-MGMT-81861 |
| Data Item Description, Integrated Program Management Report |
| 005 |
| SO300-BT-PRO-010 |
| Government-Industry Data Exchange Program (GIDEP) Operations Manual |
| 031 |
| GLPR 7120.5.20 |
| GRC Project Deviation/Waiver Process |
| 022 |
| MIL-STD-130 |
| Department of Defense Standard Practices, Identification Marking of U.S. Military Property |
| 008 |
| MIL-STD-961 |
| Department of Defense Standard Practices, Defense Specifications |
| 008, 013 |
| GIDEP S0300-BU-GYD-010 |
| Government-Industry Data Exchange Program (GIDEP) Requirements Guide |
| C.2:6 |
| NPR 4100.1D |
| NASA Materials Inventory Management Manual |
| G.8 |
| NPR 4200.1 |
| NASA Equipment Management Procedural Requirements |
| G.8 |
| NPR 4300.1 |
| NASA Personal Property Disposal Procedural Requirements |
| G.8 |
| NPR 4310.1 |
| Artifact Identification and Disposition |
| G.8 |
| NASA-HDBK 6003 |
| Application of Data Matrix Identification Symbols to Aerospace Parts Using Direct Part Marking Methods / Techniques |
| G.10:20 |
| NASA-STD 6002 |
| Applying Data Matrix Identification Symbols on Aerospace Parts or through the use of commercial marking techniques |
| G.10:20 |
| NPR 8831.2 |
| Facility Maintenance Management |
| G.8:15 |
| GLM-QS-1700.1, Chapter 17 |
| Glenn Research Center Safety Manual |
| G8: H.1 |
| NPR 2810.1A |
| Security of Information Technology |
| G.8: H13 |
| NPR 2830.1 |
| NASA Enterprise Architecture Procedures |
| G.8, H13 |
| OMB Circular A-11 |
| Preparation, submission, and Execution of Budget |
| H13 |
| OMB A-130 |
| Management of Federal Information |
| H13 |
| Exhibit 53 |
| List of IT Costs and Budget Items |
| H13 |
| Exhibit 300 |
| Capital Asset Plan and Reports on Major IT Investments |
| G.8, H13 |
| MSFC WI 5116.1 |
| Evaluation of Contractor Performance Under Contracts |
| J.1-F 4.1, 4.5 |
*** Data may be requested using Attachment J.2-9 Request for Technical Data *** DRAFT Request for Proposals 06 of 19 – DRFP Att J.1-C Applicable Documents List
REFERENCE DOCUMENTS
These documents are included for information purposes. The Contractor is not bound by these documents. Documents not specifically cited in the contract are for reference purposes unless particular reference expressly includes the application of sub tier documents.
DRAFT Request for Proposals 06 of 18 – DRFP Att J.1-C Applicable Documents List
Reference Documents List
| SLS-SPIO-RPT-XXX |
| ISPE Composite Structures Fracture Control Plan Approach White Paper |
| 050 |
| SLS-PLAN-001 |
| Space Launch System (SLS) Program Plan |
2.0
| SLS-PLAN-117 |
| SPIO ISPE Mishap Preparedness and Contingency Plan |
| 036 |
| 3.2 |
| SLS-RQMT-014 |
| SLS Program Safety and Mission Assurance (S&MA) Requirements |
| 032 |
| 3 |
| SLS-SPIO-PLAN-003 |
| SLS SPIO Technical Management Plan |
2.2.3.4
| SLS-SPIO-PLAN-019 |
| SPIO ISPE Structural Assessment Plan |
4.0
| NASA/SP 2010-3406 |
| Integrated Baseline Review (IBR) Handbook |
1.1.3
| NPR 7120.5E |
| Space Flight Program and Project Management Requirements |
| 010 |
| 1.3.1.1 |
| NPR 7123.1 |
| NASA Systems Engineering Processes and Requirements |
| 010 |
| 1.3.1.1, 2.2.3.4 |
| NPR 8580.1 |
| Implementing the National Environmental Policy Act and Executive Order 12114 |
| 032 |
| 2 |
| NPR 8705.2A |
| Human-Rating Requirements for Space Systems |
| 032 |
| 3 |
| NFS 1852.225-70 |
| Export Licenses |
1.1.8
| SLS-PLAN-004 |
| SLS Program Data Management Plan. |
| 007 |
| SLS-PLAN-008 |
| Space Launch Systems (SLS) Configuration Management Plan |
| 007 |
| SLS-PLAN-047 |
| Space Launch System Program Technical Metrics Plan |
| 025, 038 |
| SLS-PLAN-040 |
| SPIE Block 1B Materials and Processes Selection, Control, and Implementation Plan |
| 027, 028, 029, 030 |
| SLS-PLAN-041 |
| SPIE ISPE Block 1B Crew Contamination Control Plan |
| 027, 028, 029, 030 |
| SLS-PLAN-047 |
| SLSP Technical Metrics Plan |
| 025 |
| SLS-PLAN-186 |
| SLSP Program Agreements Document (PAD) |
| 060 |
| SLS-RQMT-015 |
| SLS Program Hazard Analysis Requirements |
| 032 |
| SLS-RQMT-016 |
| Space Launch System Program Failure Modes and Effects Analysis/Critical Items List (FMEA.CIL) Requirements Document |
| 032, 037 |
| SLS-RQMT-019 |
| SLS Electrical, Electronic, and Electromechanical (EEE) Parts Management and Control Requirements |
| 032 |
| SLS-SPIO-PLAN-007 |
| SPIO ISPE Materials and Processes Selection, Control, and Implementation Plan |
| 028, 029, 030 |
| SLS-SPIO-PLAN-009 |
| SPIO Integrated Spacecraft & Payload Element Concept of Operations |
| SLS-SPIE-RQMT-026 |
| ISPE Requirements Document (ISPERD) Block 1B |
| 013 |
SBU/ITAR
| NASA-HDBK-7005 |
| Dynamic Environmental Criteria |
| 049 |
| NPD 4200.1 |
| Equipment Management |
| 059 |
| NPD 6000.1 |
| Transportation Management |
| 059 |
| NPD 7102.4 |
| Program/Project Management |
| 002 |
| NPD 7500.1 |
| Program and Project Logistics Policy |
| 060 |
| NPD 8700.1 |
| NASA Policy for Safety and Mission Success |
| 033 |
| NPD 8730.2 |
| NASA Parts Policy |
| 032, 041 |
| NPD 8800.14 |
| Policy for Real Property Management |
| 059 |
| NPR 6200.1 |
| NASA Transportation and General Traffic Management |
| 059 |
| NPR 8000.4A |
| Agency Risk Management Procedural Requirements |
| 009 |
| NPR 8730.2 |
| NASA Parts Policy |
| 032 |
| NPR 8730.5 |
| NASA Quality Assurance Program Policy |
| 032 |
| AIAA-S-120 |
| Mass Properties Control for Space Systems |
| 025 |
| GEIA-STD-0007 |
| Logistics Product Data |
| 060 |
| SAE AS9100 |
| Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing |
| 022, 032, 040 |
| FIPS 200 |
| Minimum Security Requirements For Federal Information And Information Systems |
| 011 |
| FMD-97 |
| Failure Modes and Mechanisms Distribution |
| 037 |
| MPD 8720.1 |
| MSFC Reliability and Maintainability Program to Space Systems |
| 031 |
| MSFC-HDBK-2221 |
| Verification Handbook |
| 015 |
| NSTS 22206 |
| Shuttle FMEA Document |
| 037 |
| NSTS 5300.4 (1D-2) |
| Safety, Reliability, Maintainability and Quality Provisions for The Space Shuttle Program |
| 037 |
| NIST SP 800-53 rev 4 |
| Federal Information Processing Standards (FIPS) 200 |
| 011 |
| AFSPCMAN 91-710 |
| Eastern and Western Range Safety User Requirements |
| 032 |
| NASA/SP 2007-6105 |
| NASA Systems Engineering Handbook |
| 010 |
| NASA/SP 2010-3403 |
| Schedule Management Handbook |
| 005 |
| NASA-STD-8719.9 |
| NASA Standard for Lifting Devices and Equipment |
| 032 |
| NASA-STD-8719.11 |
| Safety Standard for Fire Protection |
| 032 |
| NASA-STD-8719.12 |
| NASA Safety Standard for Explosives, Propellants, and Pyrotechnic |
| 032 |
| NASA-STD-8719.9 |
| NASA Standard for Lifting Devices and Equipment |
| 032 |
| NASA TM-86538 |
| Design and Verification Guidelines for Vibroacoustic and Transient Environments |
| 049 |
| NPRD 95 |
| Nonelectronic Parts Reliability Data Handbook |
| 032 |
| NSTS 5300.4 (1D-2) |
| Safety, Reliability, Maintainability and Quality Provisions for The Space Shuttle Program |
| 032 |
| MIL-HDBK-502 |
| Handbook of Acquisition Logistics |
| 059 |
| MIL-PRF-49506-1996 |
| Logistics Management Information |
| 059 |
| SAE AS9100 |
| Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing |
| 022, 040 |
| SSP 50276 |
| Depot/Manufacturing Facility Certification Plan |
| 059 |
| SSP 30312 |
| Electrical, Electronic and Electromechanical (EEE) Parts Management and Implementation Plan for Space Station Program |
| 041 |
*** Data may be requested using Attachment J.2-9 Request for Technical Data ***