J-0200000-16ELINs_0017.xlsx

Recurring Base Period

and Functional Annexes' Spec Items 1 and 2 On-Site Labor Hours Spec Items 1 and 2 On-Site

Page &P of &N

Page &P of &N

Non-Recurring Base Period

On-Site Labor Hours Spec Items 1 and 2 On-Site

Refer to: Section C, Annex 0200000 Managmenent and Administration, Specification Item 2.15.2 Unit Priced Labor (UPL)Work (Negotiated) for description of UPL Work.

Refer to: Section J, Annex 0200000 Managmenent and Administration, Attachment J-0200000-01 Definitions and Acronyms for description of Unit Priced Labor (UPL) Hour.

Refer to: Section C, Annex 0200000 Managmenent and Administration, Specification Item 2.15.2 Unit Priced Labor (UPL)Work (Negotiated) for description of UPL Work.

Refer to: Section J, Annex 0200000 Managmenent and Administration, Attachment J-0200000-01 Definitions and Acronyms for description of Unit Priced Labor (UPL) Hour.

Category I Emergency Calls shall be responded to within one hour of receipt of order.

Work shall continue without interruption until work is complete.

As part of the Category I Emergency Call, the Contractor has full responsibility for any work identified up to the Category I Emergency Call Limit of Liability of $2,500 in direct labor and direct material, per Category I Emergency Call.

Category I Urgent Calls shall be completed within five calendar days of receipt of call.

As part of the Category I Urgent Call, the Contractor has full responsibility for any work identified up to the Category I Urgent Call Limit of Liability of $2,500 in direct labor and direct material, per Category I Urgent Call.

Category I Routine Calls shall be completed within 30 calendar days of receipt of call.

As part of the Category I Routine Call, the Contractor has full responsibility for any work identified up to the Category I Routine Call Limit of Liability of $2,500 in direct labor and direct material, per Category I Routine Call.

Category I Routine Calls shall be completed as scheduled.

As part of the Category I Scheduled Call, the Contractor has full responsibility for any work identified up to the Category I Scheduled Call Limit of Liability of $2,500 in direct labor and direct material, per Category I Scheduled Call.

Category II Emergency Calls shall be responded to within one hour of receipt of order.

Work shall continue without interruption until work is complete.

As part of the Category II Emergency Call, the Contractor has full responsibility for any work identified up to the Category II Emergency Call Limit of Liability of $5,000 in direct labor and direct material, per Category II Emergency Call.

Category II Urgent Calls shall be completed within five calendar days of receipt of call.

As part of the Category II Urgent Call, the Contractor has full responsibility for any work identified up to the Category II Urgent Call Limit of Liability of $5,000 in direct labor and direct material, per Category II Urgent Call.

Category II Routine Calls shall be completed within 30 calendar days of receipt of call.

As part of the Category II Routine Call, the Contractor has full responsibility for any work identified up to the Category II Routine Call Limit of Liability of $5,000 in direct labor and direct material, per Category II Routine Call.

Category II Routine Calls shall be completed as scheduled.

As part of the Category II Scheduled Call, the Contractor has full responsibility for any work identified up to the Category II Scheduled Call Limit of Liability of $5,000 in direct labor and direct material, per Category II Scheduled Call.

Category III Emergency Calls shall be responded to within one hour of receipt of order.

Work shall continue without interruption until work is complete.

As part of the Category III Emergency Call, the Contractor has full responsibility for any work identified up to the Category III Emergency Call Limit of Liability of $7,500 in direct labor and direct material, per Category III Emergency Call.

Category III Urgent Calls shall be completed within five calendar days of receipt of call.

As part of the Category III Urgent Call, the Contractor has full responsibility for any work identified up to the Category III Urgent Call Limit of Liability of $7,500 in direct labor and direct material, per Category III Urgent Call.

Category III Routine Calls shall be completed within 30 calendar days of receipt of call.

As part of the Category III Routine Call, the Contractor has full responsibility for any work identified up to the Category III Routine Call Limit of Liability of $7,500 in direct labor and direct material, per Category III Routine Call.

Category III Routine Calls shall be completed as scheduled.

As part of the Category III Scheduled Call, the Contractor has full responsibility for any work identified up to the Category III Scheduled Call Limit of Liability of $7,500 in direct labor and direct material, per Category III Scheduled Call.

Category IV Emergency Calls shall be responded to within one hour of receipt of order.

Work shall continue without interruption until work is complete.

As part of the Category IV Emergency Call, the Contractor has full responsibility for any work identified up to the Category IV Emergency Call Limit of Liability of $10,000 in direct labor and direct material, per Category IV Emergency Call.

Category IV Urgent Calls shall be completed within five calendar days of receipt of call.

As part of the Category IV Urgent Call, the Contractor has full responsibility for any work identified up to the Category IV Urgent Call Limit of Liability of $10,000 in direct labor and direct material, per Category IV Urgent Call.

Category IV Routine Calls shall be completed within 30 calendar days of receipt of call.

As part of the Category IV Routine Call, the Contractor has full responsibility for any work identified up to the Category IV Routine Call Limit of Liability of $10,000 in direct labor and direct material, per Category IV Routine Call.

Category IV Routine Calls shall be completed as scheduled.

As part of the Category IV Scheduled Call, the Contractor has full responsibility for any work identified up to the Category IV Scheduled Call Limit of Liability of $10,000 in direct labor and direct material, per Category IV Scheduled Call.

available on DoD FEDMALL The Contractor shall connect to ships or tanks to pump, transport, and dispose of OWWO in accordance with all federal, state, and local statutes, regulations, policies.

Hoses for ship connection will be provided by Ports Operations Department. The Contractor shall disconnect, flush, drain, and inspect hoses prior to returning to Port Operations.

Work shall be complete within 24 hours.

The Contractor shall provide waste disposal manifests that clearly indicate the number of gallons disposed.

available on DoD FEDMALL The Contractor shall coordinate with ships to provide requested hotel services, including electric, CHT, and potable water. The Contractor shall provide service at ship or vessels per Engineering Officer's direction. Utility services shall be connected/disconnected within one hour of ship's arrival/departure.

Crane operations in support of this UPT will be provided by Port Operations.

Cables and hoses will be laid out and interconnected prior to ships or vessels arrival. All hoses and cables will be stowed in designated locations on pier immediately after disconnection.

The Contractor shall provide electrical service per NETOPS (Naval Engineering Training and Operating Procedure and Standard), OPNAVINST 11310.3, Operation and Maintenance Policy For Shore-to-Ship Power, and NAVFACINST 11300.37, Energy and Utilities Policy Manual. Energize circuits at direction of ship or vessel's electrical officer.

The Contractor shall perform the NAVFAC responsibilities identified in steps 4-7 of connect procedures and all steps of disconnect procedures in NETOPS 29.

The Contractor shall hook-up and disconnect CHT hoses per NAVFAC MO-340, Ship-to-Shore Hose Handling Operations Manual and local SOP.

The Contractor shall hook-up and disconnect potable water hoses per NAVFACINST 11300.37 and local SOP.

All hotel services shall be metered and readings provided to the appropriate PWD commodity manager within 48 hours of disconnect.

Connect/Disconnect are not considered complete until all cables and hoses are disconnected, stowed at designated locations, and corresponding utility riser is capped and secured.

Section C, Annex 0600000, Spec Item 2 requirements apply to this Unit Priced Task.

available on DoD FEDMALL The Contractor shall provide labor and materials to paint the exterior surfaces. Work shall include surface preparation and protecting surfaces that are not to be coated. Provide finished surfaces free from runs, drops, ridges, brush marks and variations in colors.

Time period to respond: Two working days after receipt of task order.

available on DoD FEDMALL The Contractor shall provide labor and materials to paint the interior surfaces. Work shall include surface preparation and protecting surfaces that are not to be coated. Provide finished surfaces free from runs, drops, ridges, brush marks and variations in colors.

Time period to respond: Two working days after receipt of task order.

available on DoD FEDMALL The Contractor shall recover refrigerant from refrigerators in accordance with Section C, Annex 0200000, Spec Item 2.10.2.2

available on DoD FEDMALL Ref 1501000 3.2.1 3.1.1

available on DoD FEDMALL Ref 1501000 3.2.2 3.1.2, Split will be approx 1/3 under $25K, approx 1/3 from $25k to $150K, and approx 1/3 above $150K.

available on DoD FEDMALL Ref 1501000 3.2.3 3.1.3, Split will be approx 1/3 under $25K, approx 1/3 from $25k to $150K, and approx 1/3 above $150K.

available on DoD FEDMALL Ref 1501000 3.2.4 3.1.4, Split will be approx 1/3 under $25K, approx 1/3 from $25k to $150K, and approx 1/3 above $150K.

available on DoD FEDMALL Ref 1501000 3.4.1 3.3.1

available on DoD FEDMALL Ref 1501000 3.4.2 3.3.2

available on DoD FEDMALL The Contractor shall provide sampling and testing for asbestos by sampling, repairing the sample location, testing by certified third party, and providing a report to the govt.

available on DoD FEDMALL The Contractor shall provide sampling and testing for lead by sampling, repairing the sample location, testing by certified third party, and providing a report to the govt.

available on DoD FEDMALL The Contractor shall sample unknown waste and deliver to designated lab in accordance with applicable federal, state, and local statutes, policies, and regulations.

available on DoD FEDMALL The Contractor shall provide and install a 500 KW generator, deisel, 208V or 480V as needed. . Upon restoration of utility power, the Contractor shall remove the generator and restore facility power connections. (Many facilities have manual transfer switches, but some do not.)

available on DoD FEDMALL The Contractor shall sweep a 40 foot wide paved surface.

Minimum quantity per order is one mile.

Work shall be complete within 5 calendar days of order.

available on DoD FEDMALL The Contractor shall respond to Category I Data Calls to ensure data or information is timely and accurate. See J-1501000-01 (Definitions and Acronyms)

Category I Data Calls requiring 10 hours of labor or less.

The Contractor has full responsibility for all work (Labor and Material) required to complete each Data Call.

available on DoD FEDMALL The Contractor shall respond to Category II Data Calls to ensure data or information is timely and accurate. See J-1501000-01 (Definitions and Acronyms)

Category II Data Calls requiring between 10 hours of labor and 20 hours of labor.

The Contractor has full responsibility for all work (Labor and Material) required to complete each Data Call.

available on DoD FEDMALL The Contractor shall respond to Category III Data Calls to ensure data or information is timely and accurate. See J-1501000-01 (Definitions and Acronyms)

Category III Data Calls requiring between 20 hours of labor and 40 hours of labor.

The Contractor has full responsibility for all work (Labor and Material) required to complete each Data Call.

Recurring Option Period 1

and Functional Annexes' Spec Items 1 and 2 On-Site Labor Hours Spec Items 1 and 2 On-Site

Page &P of &N

Page &P of &N

Non-Recurring Option Period 1

On-Site Labor Hours Spec Items 1 and 2 On-Site

Refer to: Section C, Annex 0200000 Managmenent and Administration, Specification Item 2.15.2 Unit Priced Labor (UPL)Work (Negotiated) for description of UPL Work.

Refer to: Section J, Annex 0200000 Managmenent and Administration, Attachment J-0200000-01 Definitions and Acronyms for description of Unit Priced Labor (UPL) Hour.

Refer to: Section C, Annex 0200000 Managmenent and Administration, Specification Item 2.15.2 Unit Priced Labor (UPL)Work (Negotiated)…