Draft_Statement_of_Work.pdf

Solicitation No. N68936-12-R-0098 DRAFT STATEMENT OF WORK (SOW)

Section C - Descriptions and Specifications

Draft Statement of Work for

Engineering Support Services (ESS)

1.0 SCOPE

1.1 The purpose of this Statement of Work (SOW) is to provide the basic tasking requirements for contractor systems engineering services to the Naval Air Warfare Center Weapons Division (NAWCWD) and its customers.

The NAWCWD Research and Engineering Department (4.0) is the technical lead agent for this contract.

1.2 The objective of this procurement is to provide weapons systems effectiveness analysis, design adequacy studies and evaluations, test and evaluation support, general engineering, and related documentation for all fleet support, weapons, and weapons related projects supported at NAWCWD China Lake and Point Mugu, California, attached activities, and other locations set forth in individual task orders. Work will also be required outside of the continental United States, with known requirements in British Columbia, Canada and Edinburgh, Australia. This requirement provides services to functional organizations in supporting numerous Department of Defense weapons acquisition programs and related research, development, test and evaluation efforts associated with National security. Major projects supported by the Engineering Support Services (ESS) contract include but are not limited to: Sidewinder, Sparrow, High Speed Anti-Radiation Missile (HARM), Cruise Missile, Standard Missile, Rolling Airframe Missile (RAM), Gun Systems, Parachute Systems, Bomb Rack Systems, Full Scale Aerial Target Systems, and Propulsion Systems, Tomahawk, Anti-Radiation Missile (ARM), Sparrow, Advanced Medium-Range Air-to- Air Missile (AMRAAM), Sidewinder, and AIM9X missile systems; miniature munitions; and the Joint Standoff Weapon (JSOW).

1.3 The goal of this procurement is to provide an infrastructure that will foster a unified, collaborative approach that will integrate inputs from engineering and management specialists across the traditionally segregated phases of the acquisition life cycle – starting with concept refinement and encompassing technology development, development and demonstration, production and deployment through operations and support of weapons systems.

1.4 The contractor shall provide technical services in the following general areas:

1.4.1 System engineering for design studies and evaluations associated with research, development, production, and operations including effectiveness, design adequacy, performance, reliability, and maintainability, user interface design, and cost estimating.

1.4.2 Test engineering services for planning, preparing for, performing, analyzing and documenting results for systems and systems of systems undergoing tests.

1.4.3 Transition engineering services to include production, installation, interim operation, transition training to support prototypes and Low Rate Initial Production (LRIP) items for transfer of new technology from concept to Fleet support.

1.4.4 Management Analysis for project management of technical activities.

1.4.5 Training services on overviews of general engineering related topics and overview of Systems, Systems Engineering, Systems Engineering Process, and Project Management Practices.

1.5 Local Facilities.

1.5.1 The contractor shall establish a facility located within five (5) miles of the NAWCWD main gate at China Lake. These facilities shall meet the security requirements as outlined in the attached DD Form 254.

1.5.1.1 The contractor shall provide workspaces within its local facility for the contractor’s administrative staff.

NAWCWD work spaces will be provided for the contractor’s technical workforce. Government provided work spaces will include desk units, phones and the computing equipment necessary for performance.

1.5.2 The Government estimates that approximately 70% of the work performed will be conducted in an integrated work environment where Government team members and contractors work together within Government spaces (approximately 40% at China Lake, CA; 27% at Point Mugu, CA; and 3% at Patuxent River, MD).

2.0 APPLICABLE DOCUMENTS

The Government will provide all necessary reference documents not generally available to the contractor as required in this SOW and individual task order SOWs. Throughout the life of the contract, if any instruction or document is replaced or superseded, the replacement or superseding instruction or document shall be applicable to the requirement defined in this SOW and individual task order SOWs.

The following documents are applicable to this SOW:

2.1 References.

2.1.1 DoD 4500.36-R, Management, Acquisition, and Use of Motor Vehicles

2.1.2 DoD 5220.22-M, National Industrial Security Program Operating Manual

2.1.3 DoD 5400.7-R, Department of Defense Freedom of Information Act Program

2.1.4 DoDM 5200.01, Department of Defense Information Security Program

2.1.5 NAVFAC P-300, Management of Civil Engineering Support Equipment

2.1.6 SECNAV M-5510.36, Department of the Navy Information Security Program

2.2 Forms.

2.2.1 DD Form 254, Department of Defense Contract Security Classification Specification

2.2.2 DD Form 2875, System Authorization Access Request (SAAR)

2.2.3 OPNAV 5239/14, System Authorization Access Request Navy (SAAR-N)

2.3 National and international standards are fundamental to the acceptable performance of this requirement.

American National Standards Institute (ANSI) and International Standards Organization (ISO) standards may be invoked under individual task orders. All commercially available hardware and software to be acquired by the contractor in response to a Government requirement shall comply with the appropriate standards specified in the task order SOW. Additional standards and specifications with a variety of origins, and DoD standards will be utilized to the extent necessary to promote maximum utility, flexibility, and economy.

3.0 REQUIREMENTS

The following paragraphs describe technical task areas to be performed by the contractor. Work to be performed, required data deliverables, and applicable governing documents shall be specifically described in task orders to be issued by the Contracting Officer and shall be within the parameters of one or more of the tasks listed below. This work may be performed on assigned systems, subsystems, equipment and components. Technical tasking progress shall be summarized to include accomplishments, compliance to schedules, issues, problems, and risks to completion of the task order effort.

3.1 SYSTEM ENGINEERING. The contractor shall provide engineering design, design review, analysis, and services as defined by the following requirements.

3.1.1 Design Engineering and Review. The contractor shall provide engineering designs, fabricate production prototypes, modify original designs, identify and complete design validation testing, and prepare technical data packages of systems, subsystems, equipment, and components (CDRL A00B). The contractor shall review and evaluate designs provided as Government Furnished Information (GFI) to establish compliance with mission and other specified requirements. This includes analyses to identify potential impacts on performance, reliability, maintainability, user interface, logistics, schedule, and cost. The contractor shall perform integration, verification, and validation reviews of systems, equipment, assemblies, or modules to ensure that these items perform as specified by individual design specifications. (CDRL A005)

3.1.2 Engineering Analyses. The contractor shall perform engineering analyses and studies for systems development, production, and in-service support activities. The contractor shall evaluate and deliver procedures, processes, designs, and design changes for cost savings (CDRL A005). The contractor shall perform reverse engineering, when necessary, on existing, obsolescent Government equipment, and deliver to the Government a design disclosure Technical Data Package including details concerning the substitution of piece parts and requirements concerning equivalency (exact reproductions) (CDRL A00B). The contractor shall produce technology demonstrations, prototypes or mock-ups of hardware resulting from reverse engineering performed on Government equipment.

3.1.3 Operation Research Services. The contractor shall construct, modify and/or perform statistical and/or analytical investigations of, and with, mathematical simulation models. These services may include aerodynamic modeling, tactics investigation through simulation, establishment of optimization techniques, control system analysis, derivation of decision theories, development of inventory control models, conducting probability and statistical theories, and providing independent analytical assessments of systems and other organizational structures.

The contractor shall provide decision support systems and capabilities to correlate decision support applicability and their ability to support current needs and requirements. (CDRL A005)

3.1.4 Field Engineering and Analyses. The contractor shall assist the Government in planning, organizing, and responding to Fleet requests to resolve problems and improve performance. The contractor shall perform analyses of system performance through an assessment of data generated during fleet operations, maintenance, testing, trials, or training exercises. The contractor shall perform field engineering tasks related to maintaining and enhancing deployed development equipment in accordance with the equipment's operational specifications or improved specifications. The contractor shall perform system or equipment alterations in accordance with the applicable installation specifications, guidelines and alteration instructions. The contractor shall conduct the associated operational verification tests to assure the operational integrity of the system or equipment. The contractor shall identify existing Government sources of information, collect available maintenance data, edit and analyze this data, identify trends or problems affecting mission requirements, and submit recommendations with associated rationale for changes to design or maintenance requirements to improve availability and performance. The contractor shall investigate failures of components and systems to isolate the causative defect and recommend to the Government possible corrective actions. (CDRL A005)

3.1.5 Chemical Analyses. The contractor shall plan, execute, analyze, interpret, and report the results of chemical investigations. These may include research and design of thermodynamics, energy transfer phenomena, solid-state mechanisms, molecular dynamics, kinetics, and spectroscopy of energetic reactions, molecular synthesis, environmental studies, metallurgical analysis, or other chemical properties. (CDRL A005)

3.1.6 Physics Analyses. The contractor shall plan, execute, analyze, interpret, and report the results of investigations on such items as the design of missile seeker performance, kinetics, ballistics, atmospheric optics, smoke modeling, radiation transfer, light scattering, electro-optics and geometrical and physical optics. (CDRL A005)

3.1.7 Electromagnetic Analyses. The contractor shall perform and document engineering analyses, studies, and testing concerning the areas of Electromagnetic Interference (EMI), Electromagnetic Compatibility (EMC), and

Electromagnetic Pulse (EMP). The contractor shall provide reports with supporting rationale for any assumptions made during the preparation of these reports. Engineering investigations in this area may include mechanical and electronic packaging technology, mechanical and thermal modeling, item packaging and mounting technologies, component design and integration, system, subsystem, equipment and component testing (electronic and mechanical), EMC control plans, EMC test plans/test reports. (CDRLs A006 and A00A)

3.1.8 Environmental Analysis. The contractor shall prepare, conduct analysis, and review studies that support NAWCWD Range objectives relative to range mission, and potential operational considerations as they relate to weapons systems engineering, and conduct of range operational tests. The contractor shall provide written reports on findings with assumptions and recommendations. (CDRL A005)

3.1.9 Production Engineering Analyses. The contractor shall analyze production costs and manufacturing problems; review production changes, waivers, and deviations; attend quality assurance audits and surveys; and identify problems and progress concerning production, costs, and product assurance (CDRL A005). The contractor shall monitor, track, and report status and cost of systems, assemblies, equipment or components in various stages of production, repair or test. The contractor shall develop, prepare, assemble, validate, review, analyze, assess, and deliver Engineering Change Proposals (ECPs) and Notice of Revision (NORs) with supporting rationale for ECPs.

(CDRL A007, CDRL A008)

3.1.10 Technology Studies. The contractor shall perform engineering analyses and conduct technical studies to support research and development of systems engineering and test evaluation technology. The contractor shall survey advanced technology approaches to similar problems both in Government and the private sector and document recommendations. The contractor shall identify manufacturers of, and the availability and suitability, of Commercial Off-the-Shelf (COTS) equipment. The contractor shall perform engineering investigations to evaluate COTS item reliability, maintainability, availability, logistics support, and configuration status in accordance with applicable drawing specifications and appropriate support and configuration documents. The contractor shall report the results of such investigations along with recommendations and the basis for those recommendations. (CDRL A005)

3.1.11 Test Laboratory Design Studies. The contractor shall perform design, review, documentation, and provide input for potential upgrades to the design of test laboratories. The contractor shall review and provide response to Government provided test laboratories designs with recommended changes to documentation and drawings. (CDRL A00D)

3.1.12 Human Engineering. The contractor shall prepare, evaluate, and annotate human engineering program plans, analysis reports, test plans and procedures, and other human engineering related documentation. The contractor shall attend human engineering reviews and demonstrations, testing, and mockup or model reviews, record discrepancies, and formulate recommendations for resolution. (CDRL A009)

3.2 TEST ENGINEERING. The contractor shall provide testing, and support in test planning, test performance, test data analysis and documentation as defined by the following requirements.

3.2.1 Test Plans and Procedures. The contractor shall provide pre and post-test simulations of expected system performance in test scenarios. The contractor shall develop test exercise geometry and constraints necessary to implement test scenarios. The contractor shall develop or evaluate test plans and procedures and provide comments.

The contractor shall submit an evaluation report on the adequacy of such plans and provide rationale and assumptions. The contractor shall provide inputs to detailed test procedures implementing test plan requirements.

(CDRL A00A)

3.2.2 Test and Test Support. The contractor shall provide development testing to investigate technical approaches, verify interface interoperability, and evaluate technical performance under controlled conditions and in representative operations environments. The contractor shall plan, coordinate and perform test and evaluation of completed hardware designs. The contractor shall provide data capture and data retrieval for testing support, telemetry analysis, operations support, maintenance support and data capture and data retrieval support. The contractor shall attend tests performed at both Government and private test sites to review the appropriate test requirements, provide participate in analytical support evaluations during testing and procedures, monitor the test being conducted, and document the test results. (CDRL A005)

3.2.3 Test Analyses and Reports. The contractor shall review test data and perform analyses of the performance of units under test. The contractor shall formulate recommendations, with justification, to correct any test item performance, quality, maintenance, or problems impacting mission. The contractor shall recommend improvements, with justification, to design, configuration, materials, construction, or other criteria. The contractor shall collect test data and documents, review test documents, and prepare and produce test documents and reports. The contractor shall evaluate test report content and recommend changes with supporting rationale. (CDRL A005)

3.3 TRANSITION ENGINEERING. The contractor shall provide transition production, installation, interim operation, and training for the transition of development systems, commodities, prototype, and LRIP items as defined by the following requirements.

3.3.1 Development Item and Prototype Production. The contractor shall produce prototypes and development items in accordance with the authorization and specification package.

3.3.2 Installation Studies. The contractor shall identify and document installation requirements to ensure system compatibility; identify and provide recommended solutions to interface problems; review and monitor system tolerances; perform system tests to assess performance, safety, operability, reliability and maintainability, for impact on systems interface. The contractor shall perform checks in accordance with installation drawings and specifications in preparation for installation of new equipment. The contractor shall be responsible for site planning and preparation for equipment installation. The contractor shall perform the installation of new test equipment in accordance with the applicable installation drawings and procedures not to include building modifications. The contractor shall conduct associated operational verification tests to assure operational integrity of the installed equipment. (CDRL A00B)

3.3.3 Interim Assistance. The contractor shall provide interim operation for development, pre-production, prototype, and LRIP equipment or components, production material, and modification kits during development and deployment. The contractor shall perform overhaul, repair, and maintenance actions on the above items as needed to support weapons systems research, development, testing, and evaluation. The contractor shall perform systems or equipment alterations. The contractor shall conduct the associated operational verification tests to assure the operational integrity of the system or equipment. The contractor shall review, evaluate, maintain, and update data and associated documentation on fielded systems, subsystems, and components. The contractor shall provide and/or support inactivation and disposal to ensure that critical equipment removed is safeguarded and destroyed in accordance with the appropriate Government instructions and directives.

3.4 MANAGEMENT ANALYSIS. The contractor shall provide management analysis services as defined by the following requirements.

3.4.1 Technical Administrative Services. The contractor shall perform administrative support of the technical organizations to meet NAWCWD mission requirements. The contractor shall use Government furnished data to provide various technical administrative services including office administration, briefings and presentations, project reports, illustrations, display artwork, static electronic displays, exhibits, patent drawings, displays, viewgraphs, schematic diagrams, logic diagrams, pictorial illustrations, illustrated parts breakdowns, brochures, logo designs, flip charts, and project highlights; and perform data management, data maintenance and distribution. (CDRL A005)

3.4.2 Project Planning Services. The contractor shall analyze, make recommendations, provide rationale for the recommendations, and provide technical administrative services in preparing assigned project plans, schedules, cost estimates, and risk analyses. (CDRL A005)

3.4.3 Management Evaluation, Status Reviews and Reports. The Contractor shall review program and project management processes and analyze effectiveness to report on compliance with mission objectives and life cycle requirements. (CDRL A005)

3.5 TRAINING SERVICES. The Contractor shall develop, prepare and present training courses. These courses shall include an overview of general engineering related topics and an overview of Systems, Systems Engineering, Systems Engineering Process, and Project Management Practices. This training shall address program management disciplines and activities including planning, Work Breakdown Structures, risk management, integrated program teams, Earned Value Management, and problem identification, analysis and resolution. (CDRL A00C)

4.0 SUBCONTRACTING REQUIREMENTS FOR SMALL BUSINESS

4.1 The contractor shall meet the following minimum goals for utilization of small business:

4.1.1 At least thirty-three percent (33%) of the total level of effort delivered under the contract shall be performed by small business concern(s) as defined by FAR 2.101.

4.1.2 At least ten percent (10%) of the total level of effort delivered under the contract shall be performed by one small business category, as selected by the prime contractor, from the following list: Small Disadvantaged Business (SDB), Service-Disabled Veteran-Owned Small Business (SDVOSB), Woman Owned Small Business (WOSB), or Historically Underutilized Business Zone (HUBZone) small business.

4.1.3 To assure further development of small business concerns, the work allocated to small businesses shall be distributed in the same proportionate manner and labor mix among all functional areas (Program Management, Engineering, Information Technology, Logistics, Business, and Administrative).

5.0 SPECIAL CONSIDERATIONS

5.1 CONTRACT STATUS REPORTING. The specific content, periodicity, whether required at task or contract level, delivery, and format (if applicable) requirements of each report described below are defined in Exhibit A.

5.1.1 Funds and Man-Hours Expenditure Report (CDRL A001).

5.1.2 Contractor’s Personnel Roster (CDRL A002).

5.1.3 Phase-Out Plan (CDRL A003).

5.1.4 Operations Security (OPSEC) Plan (CDRL A004).

5.1.5 Technical Report -Study/Services (CDRL A005).

5.1.6 Electromagnetic Interference Test Report (EMITR) (CDRL A006).

5.1.7 Engineering Change Proposal (ECP) (CDRL A007).

5.1.8 Notice of Revision (NOR) (A008).

5.1.9 Human Engineering Program Plan (CDRL A009).

5.1.10 Test Plan (CDRL A00A).

5.1.11 Technical Data Package (CDRL A00B).

5.1.12 Training Materials (CDRL A00C).

5.1.13 Technical Report – Study/Services (Test Facilities Studies) CDRL A00D).

5.1.14 Incurred Cost and Progress Reporting for Services (CDRL A00E).

5.2 INCURRED COST AND PROGRESS REPORTING. In order to support invoice reviews conducted as part of proper surveillance, the contractor shall report incurred cost and progress in accordance with NAVAIR clause 5252.232-9529, “Incurred Cost and Progress Reporting for Services,” CDRL A00E, and the contract attachment identified in Exhibit A.

5.3 PLACE OF PERFORMANCE. The places of performance shall include NAWCWD, China Lake and Point Mugu, California, attached activities, other locations set forth in individual task orders, and the Contractor’s facilities. Work will be required outside of the continental United States, with known requirements in British Columbia, Canada and Edinburgh, Australia.

5.4 VEHICLES. The contractor shall provide all vehicles required for the performance of this contract unless shared access is authorized by the Government. Contractor personnel may use Government Owned Government Operated (GOGO) vehicles managed through the Transportation Office, NAVFAC Southwest, Code 270, under the following conditions: COR concurrence with the contractor’s need to use GOGO vehicle(s); COR oversight to ensure compliance with DoD 4500.36-R; clause 5252.228-9501, LIABILITY INSURANCE is included in this contract and applies to the use of GOGO vehicles; the contractor shall meet all training and licensing requirements to operate the GOGO vehicles and equipment, as defined in NAVFAC P-300; the contractor need for GOGO vehicles and equipment must be less than full time and shall not interfere with Government use of those vehicles and equipment; and use of GOGO vehicles is for work on a Government site and is for official use only for specific Task Order requirements.

5.4.1 Contractor employees that work primarily at non-Government provided work spaces (off site spaces) shall provide their own vehicles and equipment. Transportation Office, NAVFAC Southwest, Code 270 can only issue vehicles and equipment to Government employees. The Government remains responsible for the vehicles and equipment. The Government will only provide vehicle and equipment access to the contractor on an as available basis.

6.0 SECURITY

6.1 Personnel Security. The contractor shall provide personnel with the appropriate security clearance levels for the work to be performed. Access to TOP SECRET information is required in the performance of this contract and shall be in accordance with DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM) and applicable DoD Personnel Security regulations. The contractor will require access to non-substantial Sensitive Compartmented Information (SCI) at the task order level. Access to SCI requires a final U.S. Government Top Secret Clearance and SCI indoctrination. Non-substantial SCI security requirements will be addressed at the task order level. The contractor shall maintain sufficiently cleared personnel to perform the tasks required by this PWS IAW the DD Form 254, and the Contract. All Contractor personnel shall possess a clearance and need-to-know commensurate with the requirements of their positions.

6.2 Information Security. Direct Support contractor personnel working under the purview of a DoN Commanding Officer/Commander shall comply with the local security provisions and the requirements of SECNAV M-5510.36 (series). The contractor shall implement and maintain security procedures and controls to prevent unauthorized disclosure of controlled unclassified information and to control distribution of controlled unclassified information in accordance with DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), and

SECNAV M-5510.36.

6.3 For Official Use Only (FOUO) Information. For Official Use Only information generated and/or provided under this contract shall be marked and safeguarded as specified in DoDM5200.01 (DoD Information Security Program: Controlled Unclassified Information (CUI)) Vol. 4 (enclosure 3 pages 11-18) available as http://www.dtic.mil/whs/directives/corres/pdf/520001_vol4.pdf and DoD 5400.7-R, Freedom of Information Program Chapter 3 (pages 31-42) available at http://www.dtic.mil/whs/directives/corres/pdf/540007r.pdf.

6.3.1 Public Release. Any controlled unclassified information pertaining to this contract shall not be released for public dissemination, including posting to any social media sites such as Facebook or Twitter, unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted http://www.dtic.mil/whs/directives/corres/pdf/520001_vol4.pdf http://www.dtic.mil/whs/directives/corres/pdf/540007r.pdf for approval prior to release through Commander, Code 4L0000D, Naval Air Warfare Center, Weapons Division, 1 Administration Circle STOP 6305, China Lake, California 93555-6100.

6.4 Information Assurance. The contractor shall comply with the IA security requirements for accessing U.S.

Government IT systems. The contractor shall adhere to the Department of the Navy’s (DON) Information Assurance Program prescribed methodologies for the protection of information to support DON Missions.

6.5 Common Access Cards (CAC) & SAAR- N Forms. All personnel in support of this contract with requirements for accessing Government IT systems shall provide a completed System Authorization Access Request – Navy (SAAR-N) form (OPNAV 5239/14 (Rev 9/2011) or latest version thereof) and a completed DOD-IAA-V11.0 DOD Cyber Awareness Challenge V1 training certificate or latest version thereof. This training is available at the following locations: https://ile-deers.nko.navy.mil, https://www.us.army.mil/ or https://www.us.army.mil/. The contractor shall establish a CAC/SAAR-N Point of Contact (POC) to coordinate with the Government in such matters. The CAC/SAAR-N POC shall deliver completed Contractor Verification System (CVS) and SAAR-N forms electronically for approval and processing by the Government Contracting Officer Representative (COR).

SAAR-N forms should be digitally signed by all signatories using either their DOD or ECA issued PKI certificate.

6.5.1 Initial CAC Issuance. Contractor personnel assigned to perform work under this contract may require access to Navy IT resources (e.g., computers, laptops, personal electronic devices/personal digital assistants (PEDs/PDAs), NMCI, RDT&E networks, websites such as MyNAVAIR, and Navy Web servers) requiring CAC PKI. Contractor personnel (prime, subcontractor, consultants, and temporary employees) requiring access to Navy IT resources (including those personnel who previously signed SAAR DD Form 2875) shall electronically submit a completed System Authorization Access Request Navy (SAAR-N), OPNAV 5239/14 (Rev 9/2011) form or latest version thereof, and have initiated the requisite background investigation (or provide proof of a current background investigation) prior to accessing any Navy IT resources.

6.5.2 Annual CAC Renewal. In order to maintain access to Navy IT resources, the contractor shall ensure completion of initial and annual DOD Cyber Awareness Challenge V1. The contractor shall ensure completion of a Cyber Awareness Training Certificate or the latest version thereof, monitor expiration of requisite background investigations, and initiate re-investigations as required. If requested, the contractor shall provide to the COR/ACOR or designated SAAR-N Government Sponsor documentation sufficient to prove that it is monitoring/tracking the SAAR-N requirements for its employees who are accessing Navy IT resources. For those contractor personnel not in compliance with the requirements of this clause, access to Navy IT resources will be denied/revoked.

7.0 TRAVEL

The Contractor shall be required to travel in the performance of this task order. The Contractor shall be responsible for all transportation, billeting, and messing for the Contractor personnel except in those cases where Government transportation, billeting, and messing are the only services available. All travel costs will be in accordance with the Joint Travel Regulations. The Government anticipates travel to the following locations: Hood River, OR; Crane, IN;

Sunnyvale, CA; Washington, DC; Patuxent River, MD; Point Mugu, CA; Norfolk, VA; White Sands, NM; and Tucson, AZ. Other destinations will be defined based on individual task order requirements.